Removing a Rocker Recliner Mechanism

Removing a Rocker Recliner Mechanism
www.firestationoutfitters.com/
Xtreme Seating for extreme conditions.

[@shashankmatam6174]

You saved my day , have been trying to Split them into 2 since a while !!! I was pushing them in than out. Phew !!!

[@dganal1493]

Thanks for potentially saving my cats lives. They wouldn't stay out of the darn thing!

[@gunarmc]

I want the chair to Recline but not rock. Is that possible? Why would you take the whole mechanism off? This makes no sense if you still want a recliner.

[@stephanestratton4695]

Help

[@alexbojsza734]

Why are you taking off foot rest

[@MDTAR15]

How do you reattached the back when its mounting point has been removed? The back slides on to the mechanism that you just removed?

[@kerrieheinz1972]

kerrie heinz What do you put on the bottom of the chair after removing the rocker recliner mechanism? Do you attach chair legs?

[@kittygoddess4477]

Ok....you disassembled it. Now reassemble it and make it a standing recliner! Otherwise, what's the point?

[@firestationoutfitters]

Hi! Please see our other video - "Installing a Rocker Recliner Mechanism" on our channel. Hope this helps!

[@budzrgood]

Could you name what some of the rocking parts are? My chair is not rocking right and I think it's some bushings or bearings that have broke. Its towards the back of the mechanism. They are held in with rivets. Not sure what they are. But now chair rocks bad when it goes into the backwards motion.

[@mariarosario3857]

Thank you!

[@firestationoutfitters]

You're welcome!

[@KelliesKitchen]

If I remove the rocking mechanism will it still recline? My grandpa has difficult getting up because his chair rocks but like to recline.

[@1953kingsnake]

Hi Kellie, if you remove the metal rocking mechanism the chair will no longer recline. That metal mechanism actually holds the footrest to the chair so by taking off that part you could no longer attach the footrest. D

[@jackedinpdx]

Miss Kellie. I will tell you what I am trying out. If it’s a wooden rocker base. I screwed in four couch legs two front two not all way to back, where it is thicker wood. Then I took some books and placed them under front base rite next to footrest. But you can just try some books 📚 first.

[@4KindnessGal]

Why did you replace the bearings. Was it making a clanking noise? I ask because that is what my glider rocker is doing. Thank you

[@1953kingsnake]

You really can't replace the bearings or riveted connectors, you have to replace the entire mechanism piece.

[@Yodelinthegully-d7r]

I’ll buy a new one.

[@stephanestratton4695]

Thank you.

[@maripedro2]

Way too many steps,thank you any way.

[@2NAHFISH]

Do you want to know HOW to or not ? To learn in 3:44 is too slow. Be grateful some folks are trying to help us diyers

[@KMC47]

Totally useless, as i need to have a base for chair to sit on 😡