Removing Logos of Cubes - The Best Way

[@thecubingshelf9331]

0:22 "Just peel off the pieces"

[@chromebot9618]

Yeah thats how the pros do it

[@EliteCubingAlliance]

😂😂😂

[@Jo3shi9h]

That's what non cubes say and do when they find a stickerless cube.

[@twistiicuber1055]

In Soviet Russia, logos remove you

[@twistiicuber1055]

Because I am everywhere lol

[@KCubed]

This is like the millionth time I have seen you lol

[@twistiicuber1055]

( ͡° ͜ʖ ͡°)

[@isaacnewton7424]

Aaah you again

[@twistiicuber1055]

Yep, me again

[@jakob_cubing]

Best way: do 10000 solves

[@octogintillion]

Some cubes don't even take that long. My Gan 354 logo rubbed off after about 4000 solves.

[@jonbryant610]

I’ve had my gan x for 3 days and its already rubbing off

[@Theoquertz]

I just bought a new released Gan RS and the logo just faded fast lol, i had alot of solves

[@Theoquertz]

Justin Florendo yeah it is good, the problem is it only has the cube and the cfop pamphlet, but i still recommend you this, you can use your bare hands changing the tension, and it has the cfop for you, yes, you should buy this

[@alieffauzanrizky7202]

@Cubing Is L͟i͟f͟e͟ it's good when you really want a gan cube, but you could buy a cheap magnetic cube for the price of the rs. I'm not saying it's "bad" since i have one, it's just you could have better with that price

[@tristanclark7086]

I got way more excited than I should have when I saw the Baroque Violin Shop logo on the cloth. I got a really nice cello bow from them. They're great.

[@ValtteriHakio]

Sugar leaves a lot of scratches so I prefer an eraser. Just wash the cap with water after removing the logo. 100% comp legal, found in every household and no scratches.

[@chromebot9618]

Nice onion

[@paper2222]

what kind of eraser and can it be any?

[@ValtteriHakio]

@@paper2222 basically any. I would recommend a white one if you have one so there is no chance of it coloring the cap but not sure about that

[@paper2222]

Valtteri Hakio i mean i think colored erasers would work if it can't stain a paper it won't stain plastic

[@ValtteriHakio]

@@paper2222 then by all means do it. I have never even had a colored eraser so I didnt really know that :D

[@khaoshoe]

Yes blindfold fans the is the best video for you. And speedcubereview that joke was.. Hilarious

[@chromebot9618]

Yeah

[@adamn.jrgensen1893]

Ha ha

[@Felipeh999]

Isopropyl alcohol works really well for removing logos. And it doesn't damage the plastic.

[@atomnj2007]

Alcohol and eraser actually works.....

[@ntd252]

@@atomnj2007To me (Tornado cube), eraser does most of the job

[@AedanBryant]

I used a pencil eraser for my wuque and wushuang and it worked really well

[@kidabear782]

Tipster

[@cubert8880]

it's working well for me too!!

[@prosperitycodm7569]

@Tipster Trickster thanks for telling me that! I tried it and it worked!

[@moniquescholte-mierau5118]

if your pencil eraser to small the end scratch it

[@higgledypiggledycubledy8899]

Do you think this could be used to make "frosted" plastic (Warrior W, Meilong, Little Magic etc) smooth and shiny?

[@SpeedCubeReview]

Looks like I need to test this out!

[@tehyoshi]

I've tried this. It sort of works; it makes the surface a bit smoother, but the amount of elbow grease to put into this makes it nearly not worth it, so that's entirely up to you. Another thing to look be careful of is that you'll get that mag polish in nooks and crannies that makes it very difficult to get out. However, if you happen to have a Rubik's Speed Cube by GAN, it works perfectly on the tiles.

[@patrickjohneby1306]

Can this be done with UV coating, or will the polish make the cap a different texture?

[@SpeedCubeReview]

You would need to sand off the UV

[@patrickjohneby1306]

Thanks!

[@double_chin_dave]

@@SpeedCubeReviewis there any way to remove it without sanding it?

[@asignificantspek]

Just give the sugar way more time

[@punky797]

Wulfric Cubing yeah

[@ek_old0723]

How i remove the logos Use my sweat

[@wakkle]

Max J literally katara in jail

[@internetchocolate6733]

Matthew Manzano "Katara, you are a genius! A sweaty, stinky, genius!" - Toph

[@DogeMahHits]

Might wanna try Using Salt and Isopropyl/Ethyl Alcohol. Put Salt on a Thick Towel and add the Alcohol (any amount) and scrub the cap alone. It may scratch the cap though

[@thatoneshellcuber]

Does this work on uv cubes

[@ENTheIan]

Does it work good on the tornado v3 flagship and what the heck is that material called

[@eternalrewind2190]

But I I want to keep them on. I get sad when the wear off

[@mathewgaspay5877]

The logo that was on my valk kinda just peeled off on its own after like 500 solves. I think it happened because I'm a Roux solver when I was doing m moves I was rubbing my fingers against the logo. So I guess I would recommend you do 500 Roux solves.

[@typhoeus7774]

The valk logo is literally a sticker

[@SpeedCubeReview]

Not always. It’s been printed on.

[@typhoeus7774]

@@SpeedCubeReview Rlly? Oh I've got a valk and it's a sticker logo so I assumed all of them are. Thanks for the knowledge

[@araring]

@@typhoeus7774 yours was probably a stickered valk

[@typhoeus7774]

@@araring must have been. Mine was the mini valk. Are all mini valks stickered logos?

[@jeromecabarus6893]

by removing the logo? is it gonna scratch the cube aswell?

[@SpeedCubeReview]

This stuff actually polishes the cube and removes scratches.

[@Speedcubeinfozilelai]

I just rubbed 5 of my cube in my collection, and I put my own stickers on it😂😂😂

[@lucasfontes7914]

The Cyclone Boys logo is so cool.

[@NickMaovich]

but the cube isn't xD

[@lucasfontes7914]

@@NickMaovich It's not that bad .

[@lauritsjacobsen8345]

Xman"

[@nobyghazali6314]

I literally saved up 2 months for a Gan X just to unbox the cube without the Gan logo

[@HappyRaven-neilrw]

0:18 "Take a sticker and peel it off!" 0:23 Tt-haha, let's just forcet making a joke.

[@misterchess3254]

Just do 10k solves with the logo colour on bottom, IT will make the logo wear out

[@paper2222]

lol

[@MrWijayasalim]

Hahaha...

[@NJBSports_KH]

Just peel it off Or you can just use a magical eraser

[@nali8583]

does brown sugar work?

[@jessemartinez9436]

Thanks for your videos, I've learned a lot over time. I personally recommend toothpaste since it was suggested to me and worked great without having to spend extra money and didn't eat at the gloss or enamel of my center cap like when I used rubbing alcohol.

[@bigoofersrock]

I was just about to comment that toothpaste is also a micro-abrasive but you beat me by about 3 years.

[@punky797]

For Sugar/Salt you gotta rub it for at least 5 minutes

[@cookiecubing1235]

This is good information! Thank you 🙏

[@Ferdiepie.]

Can you use cubes with logos with bld? Cuz I know you can’t with stickers

[@SpeedCubeReview]

Not any logo

[@freefire-funnymomentsandwt1672]

Uhm, how about how to avoid the logo from fading? 😢 I really love the logo of my speedcube.

[@TimJorden506]

Same here I kinda like the logo on the cube without it it feels kind of generic the only way I keep mine from fading is using clear tape and put it on the logo but the end result doesn't look that good tbh(to be honest)

[@thatoneshellcuber]

Hi, does this work on uv coated cubes

[@SpeedCubeReview]

They put the coating over the logo so you would need to remove the coating before ever removing the logo.

[@AceCuberPH]

Is this can remove scratches from the stickerless cubes?

[@nasdfigol]

Toothpaste and cotton swab works too, used it on my YS3M

[@quchen]

I just removed my Gan (356M) logo with toothpaste instead of aluminium polishing paste. (The video got me thinking what other things had polishing grains in them, and well, toothpaste does.)

[@whitenile-q7z]

why did you take off the gan logo...

[@SpeedCubeReview]

Some people prefer it blank, while some need it blank if they do blind solving.

[@SHARATHANMUDALIYARALTUNSAMBANT]

Does it works on gan 12 frosted

[@SpeedCubeReview]

Yes

[@speedruner_1WR]

Can i remove logo on gan 12

[@SpeedCubeReview]

Not UV coated.

[@T1Cubing]

0:24 Shawn what was that noise?! It sounded like a squeaky toy for a dog or a rubber duck! 😂

[@sand6463]

T1 Cubing a phone vibrating

[@T1Cubing]

Sand Stew i don’t remember a phone sounding like that

[@SpeedCubeReview]

You only get the best added sound effect with these glorious productions.

[@T1Cubing]

SpeedCubeReview and that’s a fact 😂

[@sand6463]

T1 Cubing like when you get a message when your phone’s on the table

[@alpacamale2909]

can you do this with the Moyu RS3 M?

[@SpeedCubeReview]

With any cube. Many companies just use stickers though that can peel off.

[@alpacamale2909]

@@SpeedCubeReview cool. I will try it when I get mine

[@Speedcubeinfozilelai]

Rs3m had a sticker as a logo

[@andreyii4701]

Does Acetone works?

[@SpeedCubeReview]

It will melt plastic and is much more dangerous.

[@andreyii4701]

@@SpeedCubeReview does aluminum Mag work on every side?

[@andreyii4701]

my Mom accidentally wipe my Gan with Acetone and it made a mess on my cube...will the Mag & aluminum polish clean y cube?

[@SpeedCubeReview]

It could. It depends on how deep the acetone went

[@VR_Miata]

The start just killed me 😂

[@lbcubing]

When I tried nail polish remover it destroyed my center cap.

[@peternagamanu4617]

what do we get from removing the logos 😅😓

[@SpeedCubeReview]

A cube without a logo

[@arthurkui9532]

Why would you remove ht GAN logo?... Edit: I hadn't seen the whole video yet

[@鄧南英]

because wrc makes stupid rules lol

[@ethancheng6734]

wca*

[@TheXCuber1]

For bld

[@TheTrueFriend.]

Thank you very much ^^ Can I ask you how to repair the GAN logo XD I have 356X but now the logo looks kinda of faded out :"D How I can fix it and improve the look of it ? Thank you very much

[@SpeedCubeReview]

You can buy logo stickers. See if SpeedCubeShop has extras. They have a replacement part request form.

[@onyxpascubillio2325]

Why do you need to remove the logo?

[@SpeedCubeReview]

A few possible reasons 1. No logos allowed for blind solving 2. Want to change the logo sticker 3. Just like a clean looking cube

[@onyxpascubillio2325]

@@SpeedCubeReview ok thanks

[@huypham2911]

There is a thin film on the sticker LoL it covers the logo 🤪 how can you remove logo by rubbing on film?

[@casscorrupt496]

I've done it with sugar, takes very very long though

[@nexion2406]

I actually like to have logos on my cubes the only reason why I wouldn't is for blind

[@ayden3728]

I tried sugar once and what i did was take off the center cap and rub sugar on it for like 5 minutes

[@Hitesh_Creative_World]

Do 1000000 times m2 moves by doing uperms.make sure you have pointed nails .keep the white colour on bottom.

[@spacedude2.0]

I need help on removing the logo on my qiyi m pro ball core uv can someone tell me how?

[@SpeedCubeReview]

You would need to remove the UV coating

[@Cubeddude]

how about uv?

[@SpeedCubeReview]

Logos are usually under the uv coating so you would need to remove the coating entirely on the cap.

[@rhedsvenido8844]

I'm literaly protecting my gan logo

[@SJ-pt1wy]

Why do you wanna remove the logo??

[@jerrythebanana]

they said it in the vid, im here tho because i like my cube with just clear colors.. it just feels better imo

[@yoelrappaport5991]

Mine came off after about a couple of weeks...

[@the1barbarian781]

The sugar worked for my GAN 354 M (Not sugar cube) you just need to give it more time

[@ysf_z]

But, i need to know how to make my own logo and put it on my cube Can you tell me *HOW*?

[@SpeedCubeReview]

I got my stickers printed from SpeedCubeShop. Send a message to see if you can get some made to.

[@rekhathanvi4312]

Why to remove the logo

[@SpeedCubeReview]

Multiple reasons I go over in the video

[@dwiski]

Oh really it's easy to solv- I mean remove the logo, just peel the stickers off ツ

[@mihaicaprian8132]

you have to rub the sugar more

[@checkYVELLUAP]

tip: you can also use toothpaste

[@paper2222]

to use any sugar on logo, you need to rub it FOR MINUTES no joke i removed two logos using this mehod

[@morganherbert1395]

my sweaty thumbs got my GAN logo off lmao

[@rafaelgarcia2399]

You have to rub sugar on the logo for 5 minutes

[@bernithsaavedra6703]

Thanks !

[@palparlu1]

Thanks for all. The day after tomorrow I'll participate in 3BLD with my GAN logo erased...

[@jhonlawrencebulosan741]

I don't have experience with customizing 2x2s, but I am quaking by the fact that he pours sugar and spills some of the sugar INSIDE OF THE CUBE instead of taking the piece out. Again, I don't even know if taking out a piece on a 2x2 is possible...

[@SpeedCubeReview]

Taking out a piece is possible. The little bit of sugar will not damage the puzzle.

[@jhonlawrencebulosan741]

@@SpeedCubeReview Okay, I just feel like the sugar may add a sandy feeling to the cube. It may not matter though, since you stated in the video that it's a cube that you don't really care for.

[@SydTom2021]

That was sweet

[@eddie9687]

the sugar one works you just need to do it for 5 minutes or more

[@codeskills1171]

Why?

[@SpeedCubeReview]

1. You cannot have logos for blind solveing 2. Some people don’t want any logos 3. Some people want to put a different logo on instead. 4. ‘Cause

[@codeskills1171]

@@SpeedCubeReview love the 4th answer : )

[@ojussjfa8376]

thank you bro:]

[@noclud5137]

I just peeled off the logo on my Valk.. and on my gan , after 4000 solves it's gone

[@ねぷとねえねるじ]

POV: you break your Redi cube

[@wallace1400]

Sugar works.you just need to rub it for 15m

[@cattebayo]

what if it has a UV coat?

[@SpeedCubeReview]

You would have to and through all of the UV coating or find a way to dissolve it.

[@cattebayo]

@@SpeedCubeReview dang

[@AnthonyRochester]

I thought that for blind it doesn't matter if the logo is printed on and you can't feel it, it just can't be a sticker.

[@AnthonyRochester]

but I just checked the regulations and it just says there can't be a logo

[@SpeedCubeReview]

This was changed a little bit ago as some logos were debatable as to if you could feel it. Every competition was different depending on if the delegate could feel it or not. Taking away all logos clears up any debate now.

[@iris9179]

U have to rub and rub for sugar for like 10 mins or below

[@sandrochove3964]

best way to remove the logo is to take a sandpaper with a high gritness

[@SpeedCubeReview]

It will still leave the piece looking quite scratched up if you do that

[@swatichaudhari1298]

The joke at the start....... seriously dude

[@markzhang6078]

how many gan x's do you have lol

[@riccardoventuraleone5908]

just casually has atleast 3 gan xs

[@aakumaaa_]

The other one is a gan r

[@riccardoventuraleone5908]

@@aakumaaa_ i just pulled off the sticker. no pun intended i have a mf3rs3

[@yeetmixclear]

i used a normal eraser and it worked

[@Speedcubeinfozilelai]

But it couldn’t work on stickered cubes

[@youssifgamal8545]

why in the world would anyone want to remove gans logo from the cube , its like removing apple logo from an iphone

[@SpeedCubeReview]

So you can use it at competitions for blind and to add your own logo.

[@AnthonyRochester]

Mine is 95% worn off just from normal use

[@kpccuber4839]

The Sugar works you didn't wait long enough

[@jonbryant610]

The logo rubs off on gan cubes so easily

[@pllskip961]

ikr

[@kinbruh]

suger works. u just have to be patient

[@icube6514]

..................................................you have to rub the sugar for like 15 minutes.........................................

[@SpeedCubeReview]

That’s literally why it’s pointless. Doing that with a finger or any abrasive would do the same, especially over what I already talked about doing that worked quickly.

[@icube6514]

@@SpeedCubeReview Wow you were fast with answering.... Congrats. And I think that sugar could also scratch the cube so it is probably not the best idea...

[@nirmalisaikia7879]

Just pour sanitizer on cotton and rub it. It's even faster

[@SpeedCubeReview]

That doesn't work in this manner and can also smear it into the plastic as well.

[@nirmalisaikia7879]

@@SpeedCubeReview But it worked perfectly on my cube. No scratches, full white.

[@macreb6574]

But the gan logo gives me 15% speed

[@lakuusarree4860]

you have to wait

[@marlenebayta553]

My logo is fading :(

[@Theoquertz]

Same on my gan r D:

[@TheFoxSniping]

Theowy I know how to fix that Don’t use a Gan R

[@AzPlayz1052]

Dude you haven't rubbed the suger for minutes smh

[@SpeedCubeReview]

Compared to using the options I already said using sugar is not a step up. With the amount that was altered from The logo with what I already used is no different than if I just rubbed my finger or any other thing that would cause abrasion.

[@mlbrown76]

Toothpaste works also.

[@mallusaih]

What if.... I got no sugar?

[@SpeedCubeReview]

Well, it’s a good thing I don’t suggest it.

[@angelocampos6582]

Wait...OTHER GAN X 🤯

[@aakumaaa_]

The other one is a GAN 356R lol.

[@haivn6]

@@aakumaaa_ really?

[@TheRealVicthor]

this video was really

[@theblackbeltcuber6626]

Use an eraser

[@robotwheels]

use acetone

[@SpeedCubeReview]

That can cause issues of the print blending with the plastic itself. It could work but a bit more risky.

[@chazensaw2664]

Just use a rubber

[@theindianspeedcuber5339]

Will you remove gan logo?😂

[@SpeedCubeReview]

i literally just did

[@theindianspeedcuber5339]

@@SpeedCubeReview Ouch

[@theindianspeedcuber5339]

@@SpeedCubeReview And I am in search of gan logo sticker😂

[@SpeedCubeReview]

Often people prefer or even need a logo removed. Sometimes shops like SpeedCubeShop will have stickers you can purchase.

[@theindianspeedcuber5339]

@@SpeedCubeReview ok