REMOVING THE BLISTER PACK FROM YOUR HOT WHEELS CARD AND PUTTING IT BACK ON * link in discription

[@gabealcoser2210]

Great video, I found a super treasure hunt Mercedes out of a sealed damage box, and unfortunately the super's plastic on the blister card is crushed but the card is fine. I just want to replace the plastic display.

[@k8vnl]

Brilliant video I never knew this was possible.

[@slytv4352]

❤❤❤THANK YOU SO MUCH ! ! ! ! That was what i was looking for. Open it, play with it, and put it back in when i sell it. Surprisingly i have acetone at home. Thank you for the video!!!!!

[@howardholland5180]

I just try it and it works perfect. Before I used a Stanley knife, but this is much easier. Thank you.

[@fishtropiccanada4747]

I am here because i bought something that was suppose to be sealed. Tacky glue for the win thank you sir ❤ and now i also no how to customize cars ❤ cheers

[@gunnarbiker]

Very helpful! I'm about to embark on my first custom Hotweels. Turning a '55 Gasser (military looking) into a black Pac-Man mobile. Got the decals on Ebay. This is for my personal 80's display. Thanks for the video!

[@jkptoysandcollectibles3798]

How’d your custom turn out @gunnarbiker?

[@TopSecretVid]

Very cool…. I wondered how these custom modded Hot Wheels got resealed. 🤙

[@ghostex200]

Very helpful video. I’m gonna try this on an STH that I got recently but it came with a cracked blister. So I plan on doing a full restoration on it

[@ghostex200]

@Exclusivë_ update: it was a success. It looks as if nothing happened

[@ghostex200]

@Exclusivë_ i’ve only tried it on the mainline card, not sure about the other cards

[@ph17ipp17]

@@ghostex200 Hey man! I know its been a while but can you maybe give some more details on how you exactly do it? Want to do the same with a cracked blister STH but I'm a bit afraid to mess it up haha. Cheers

[@rocketskidz]

Hello its rockets kidz. Nice to meet you. Cool trick you have there. That awesome!

[@norsefalconer]

I ordered a bunch of mainlines on sale for $1 ea (usd) to start my customs journey. When I get a process worked out, I think I'l buy some, custom them, then put them back on the pegs at stores in my area, lol.

[@angelodoesthings]

I have some hot wheels monster jam trucks and they are sadly coming off the blisters so this helps out a ton

[@diegosorrell7572]

I ordered a ferrari “A FERRARI” hot wheels and it cane with the blister bubble apart from the card so the video really helps

[@jkptoysandcollectibles3798]

Awesome! I’m glad you could make good use of the information . Ferrari’s are one of my all time favorite castings.

[@Labyrnthdom]

This is exactly how i take the blister off. However, you can put it back without glue. Just use a cloth and an iron around the edge and it will soften the glue and cause it to seal.

[@left4speed519]

I like to use a sharp knife and cut the blister smoothly and it works fine. Im afraid that if you are not careful you can damage the paint of the car and you are screwed, so ill play safe.

[@jkptoysandcollectibles3798]

You shouldn’t have to use enough acetone that you’d saturate the card to the point it damages the car but yes the acetone would in fact damage the finish if on it for a period of time. I’m normally painting them when I remove them so I’ve not really ever been too bad concerned. A knife although if careful you can remove the blister but your leaving all the glue. I like the fact that the acetone dilutes the glue. Give us a video of removing the blister pack with a knife. I know I’d love to see it!! Also, Thank you for the view & the comment!!

[@campigomez]

If the cards are premium, how do you peel off the plastic without erasing the paint?

[@jkptoysandcollectibles3798]

Premiums are a different story… lol Honestly I’ve not tried to figure that one out except carefully using a razor blade. I’ll see what I can come up with and get back to you on that one.

[@jean-marcmantha]

How to make those cardboard for the hot wheels

[@jkptoysandcollectibles3798]

I’ve never attempted making the cardboard backs from scratch but I’ve covered the factory cards several times using a printer & card stock paper

[@Sennji]

Will this lower the price of the car?

[@jkptoysandcollectibles3798]

If you do it correctly you can’t tell it’s ever been out of the blister. I will add though that a person if they sell something they’ve opened they should probably sure that information. Again, if done correctly it will look 100% factory & buyer shouldn’t mind.

[@muhammadharithazizibinsham7123]

How to remove car culture blister?

[@waynecarney8635]

Have you tried to do ceramic coatings like on real 🚗

[@jkptoysandcollectibles3798]

No, I spray either base/clear l(automotive paint) & sometimes nitro lacquer. If that’s what you meant?

[@Tovogaming]

I did not have any of the supplies so I ripped it off. 😅

[@ThePokeBoyss]

Bro this shit does not work at all i used 2 bottles on 1 car and i still had to rip it off 😢

[@yyk_y]

id rather just use a glue stick

[@leonardpaciora5039]

Theft and scams