Removing the Cueing Apparatus on a Rega RB-300 tonearm, may apply to other Rega arms. Main tools needed, a very small thin bladed straight screwdriver and a .050 allen wrench.
Пікірлер: 18
@jarzbent4 жыл бұрын
Thank you so much! My lifter side arm was snapped and needed to replace entire assembly. These instructions with tips and warnings were spot on!
@kingdhansak4 жыл бұрын
Brilliant video, followed this to replace on my own Rega arm - worked a treat, thanks!
@thehandseesall7 күн бұрын
what viscosity should the damping fluid be on a Rega?
@gotham618 жыл бұрын
The Rega cueing devices use grease for damping and not silicone fluid. They are usually very reliable and don't need service, although the cam mechanism can wear after many decades of heavy use.
@MASTERVETEAM48 жыл бұрын
I had a 250 cuing lever breaking on me 5 years ago. But usually they are reliable. They tend to get stiffer with time though. For what it's worth, you are better off replacing it if it breaks
@leobot6987 жыл бұрын
Hi , what grease do you use for the cueing system? Thanks
@davidhumann8691 Жыл бұрын
What is the size of the Allen wrench please?
@marcodesimone29023 жыл бұрын
Thank you for your very interesting video. Do you know if it's easy to find new this item. I have an Planar 3, 33 years old, never problems but I don't know the duration life of the cueing!?!?
@andrewmorton96833 жыл бұрын
A search for "rega rb300 tonearm lift" should find it on the UK ebay site - I've just ordered one for a Planar 3 of a similar age because it sinks on its own.
@marcodesimone29023 жыл бұрын
@@andrewmorton9683 Thank you very much for the answer:) Marco
@ddarch888 жыл бұрын
Thx!
@mk23hk7 жыл бұрын
I used tweezers that fitted to the spanner nut to remove it.
@MrAcidtrip774 жыл бұрын
Hi, thanks for this video. I would like ask you about what kind od fluid do i need for the lever?
@shs7473 жыл бұрын
Any suggestion on how to adjust the height. Even after adjusting with the alan wrench it does not lock to the necessary height to lift the arm from the record?
@ddarch883 жыл бұрын
Are you certain the VTA is correct?
@gwadaflat5 жыл бұрын
Hi , I recover on an old arm Rega a ToneArm lifter, do you think it is possible to change it to turn it into ToneArm automatic lifter end? It may be interesting to find a solution that will be an alternative to ToneArm lifter automatic relatively expensive, what do you think? 😜👍🏽