Ⓜ️ WPL C24 Metal Upgrade 100% Part 2

[@rekozma]

Nice job brother. If you lean the front and back shocks inward just before the bend you'll get a little more softer rebound with them particularly shocks. You will have to drill the relocation holes but I promise it's worth it. The flex and rebound tou get are well worth the 20 minutes of modding. I went back to the stock shocks and did the deep bore and spring clip mod. But everything else is basically like yours. With the 2 speed transmission. And a tire mod. The wpl c24 has had a bad rap from it's beginning. It's not what it started out as. No it's the leader in 1/16th crawler on a budget. Best fun I have had out of an under $200 rc crawler.

[@a-ztube]

Hey Brother thank you very much ☺️ 👍🏽 you're very welcome 😉 🙌🏽 Thank you for that tip that's what Iam going to do in the front for sure,but don't know to inner or outer side I'll try,but definitely the best way like you said. Yes 💯% the best one for that budget 🦾🏎😍 2 speeds all the stuff is coming also Bro 😍👌🏽 Have a nice week stay safe ✌️🏽 😊

[@hunterchadph]

i have this model too, and from my experience if you upgrade the parts to metal you should also upgrade the motor to 370 or higher cause the stock motor will struggle due to the added weight and other stuff.

[@a-ztube]

It's an good idea my friend 😊🙌🏽

[@edwardlove4300]

Thanks for sharing, question for you. I have a WPL B1. I want to add shocks but I'm not sure how to attach the lower shocks. I have the KM metal axels. Do you have any ideas? Thanks in advance. Edward in Osaka Japan

[@a-ztube]

Sure Edward that's what's the channel for 😉🤜🤛 please check my Instagram or email maybe you can send me an pic of your car and I can check 😉 Nice regards from Germany

[@rosidahabuchik8786]

Hi....i want ask something at you! If i change metal axle like your I have to change the metal pull rod..too..or

[@a-ztube]

Hey my Friend, Yes that's true normally you can't mix plastic and metal together 😣. Have a nice day ✌️🏽 😊

[@rosidahabuchik8786]

@@a-ztube Wow.....thank you very much!😊😊😊😊

[@a-ztube]

You're very welcome my Friend 😊 👍🏽

[@chrismooneyham5279]

Is there a reason you went with toy grade friction dampers instead of getting some adjustable oil shocks? It looks good, I just got a new C-14R the pale yellow one. I've got some stuff on the way for it It was fun while the little plastic gearbox held out but that wasn't very long in the yard.

[@a-ztube]

Hey Buddy, Cause these where all the parts available at that time 😉🤙🏼 surely there are lot if better options also stock everything works really good , but youuuuu know by yourself wet can't let things stock 🤣🙈 In my opinion only few things make sense in metal on these and the rest stock work's good next time I would use the wpl original metal parts 😉🙏

[@chrismooneyham5279]

@@a-ztube stock! Man I know I bout a tamiya tt02 kit 5 months ago and have only the chassis left and I mean only the pan which I want to get a carbon fiber one but I'm going to let the prices come sown some but I have $700 in it. And I don't even enjoy driving it, but that's because I live on an old road that's still rough and no place for a road car of it caliber. But I just got the c-14 I told you about abd just a few minutes ago in the mail I got my new motors and I have a metal gearbox coming but I'm thinking about doing away with that and doing two 3,000 rpm direct drive to each axle gear motors. I'm actually in the process of installing them. But I have a brushless A2212 2200kv system with a 30 amp esc I could mate with the gearbox I have coming but I think the direct drive is going to be more than enough especially since they are gear motors. I can't stop it with my fingers and I'm not a small dude. So I know what's go8ng to be next, axles! Hey I only asked about the shocks cause I've got some titanium ones identical to the one you have so if they work good I'm going to throw them on as well. Thanks for the response. Be Blessed

[@robingo6257]

How is your oil damper shock compare to the stock spring? Not that different? or the silicon oil works like a real oil shock when the outer spring restored the oil delay happens?

[@a-ztube]

Hey my Friend, Oil shocks allways much better, and they work good,but I think for these low weight crawlers is allways better less stiffness to have in the shocks depends on your build for sure 😉 👍🏽 But the work really good I like it. Have a nice day ✌️🏽 😊

[@robingo6257]

@@a-ztube Thanks my friend. Okay I buy the oil shock C even I just got the new spring shock. I always wished the oil damper performance !

[@a-ztube]

That's cool buddy 😉🙏🏽

[@AddyRCBuddy]

Awesome upgrades brother. Love the way it looks now. White and green looks dope! 😸💚

[@a-ztube]

Thank you so much Bro 😘🥰🙌🏽 Yes it's definitely an nice color setup 🦾💯👌🏽🏎 Stay safe Bro see you around ✌️🏽☺️

[@Tano6787]

Uhm hi may i ask something how big is the servo because im trying to assemble a full metal build

[@a-ztube]

Hey buddy, Hmm hard to say right now if Iam able I would try to measure them.... You can also go to the wpl Web site maybe you can find the measurements 😉🤜🤛

[@donaldhenke2750]

what size are those shock screws?

[@a-ztube]

Hey my Friend I don't know really I think m2 maybe m2.5

[@donaldhenke2750]

did you have to move tires out so they wouldnt rub on front tires?

[@a-ztube]

Hey my Friend sorry but I didn't understand your question 😁🙈 What do you want to know? Nice regards ✌️🏽 😊

[@donaldhenke2750]

@@a-ztube are the shocks to big and rub on tires in the front? sorry

[@a-ztube]

No problem you're very welcome my Friend 😊 👍🏽 No they're not to big and they don't rub in the tyres 👍🏽

[@NaturalBornGriller]

if you mount your tie rod on the same side as your drag link you don't have to bend it, and you get more clearance

[@a-ztube]

Awesome thank you very much mate 😍 👍🏽

[@ketchupmustard5465]

I really enjoyed the video. I wish I would have seen it a week ago. Better late than never

[@a-ztube]

Hey my Friend you're very welcome 😉 👍🏽 Thank you for your kind words appreciate that very much 😍 👍🏽 Have an fantastic weekend ✌️🏽

[@ketchupmustard5465]

@@a-ztube you to bubba. I hope you have a great Christmas

[@giontech8072]

Hi! Sir, do you have a video on how to lower down the body, I mean lower down the shock absorber? Thanks.

[@a-ztube]

Hey my Friend I've done this when I fitted the wpl c54 body in my C24 frame you'll have to cut the springs from the absorber a little bit and also use the shock adaptors take a look on my wpl c54 build video my Friend 😊 👍🏽

[@RichHair]

Perfekt . I like your Videos. Its chill and good to look

[@a-ztube]

Thank you so much Bro appreciate your kind words 😍 🙌🏽

[@cadpagmar24]

Just got a c24 my self. Where did you get the upgrades from would love to get them my self

[@a-ztube]

Congrats my Friend 😊 👍🏽 All the parts I used are allways in my Video Description you'll find everything there 😉👍🏽 Have a nice weekend

[@mateoarellano3193]

Can u do video of how to upgrade to brushless motor

[@a-ztube]

Hey my Friend, Hmmm I don't know right now maybe in the future 😉 👍🏽 So you want to have it drives faster?

[@edwardlove4300]

I also wanted to let you know I've subscribed to your interesting channel. 😹

[@a-ztube]

Thx Buddy much appreciated 😍🤜🤛

[@haeryoboro5828]

Shock could be filled with oil anything?

[@a-ztube]

Yes,but Iam not sure if they are 💯% close my Friend 😊 👍🏽

[@haeryoboro5828]

Did you ever give the oil in shock. how is the result?

[@a-ztube]

Yes a little bit just to lubricate the shocks That was fine 👌🏽😉

[@haeryoboro5828]

yes because I just bought such a shock. but yet I haven't received it in the seller's process yet. I try looking for dtail at youtube but no, who was discussing such shock. thanks for your friend's answer.

[@a-ztube]

Hey my Friend you're very welcome no problem get back to me any time 😉 👍🏽 They look really grear hope you get them soon 💯🏎👌🏽 Have a nice week

[@naelrc4583]

Awesome build c24 my friend! Great work. Liked & subbed😁👍🏼👍🏼👍🏼

[@a-ztube]

Thank you very much my Friend for the kind words appreciate that you're very welcome 😁🙌🏽 Stay safe ✌️🏽 😊

[@naelrc4583]

@@a-ztube Welcome & stay safe too my friend😁👍🏼

[@a-ztube]

😊

[@torontorc4637]

Nice work man 👍🏾

[@a-ztube]

Thank you very much Bro appreciate that 😍🙌🏽 Stay safe ✌️🏽 😊

[@a-ztube]

Wpl C24

[@a-ztube]

Yes

[@Andrewolf79]

Love it whats the link or where did u buy the metal hubs ❣️

[@a-ztube]

THX buddy all the Links in the video Description 😉 👍🏽, tell me if they're not working I used to renew some links on some other videos from me 😱🙈😵‍💫

[@pejalai]

The steering servo link, just move the steering rod to upper position and the servo rod will be nearer to the servo.

[@a-ztube]

Hey my Friend what do you mean by that? Nice regards ✌️🏽 😊

[@pejalai]

@@a-ztube the part where you have to bend the servo rod because it was too far from the servo. You can actually move the steering pull rod from the bottom to top then put the servo rod above that. Hard to explain...

[@a-ztube]

Ah okay now I understood 😂🙈 Anyway yes but I had two small problems with that first the Rod easy moves out if not used LOCTITE and the second one was it was a bit over stressed because of the missing angle and when moving the servo to the left side it had to work to much making a little bit of noise so I think it's because of that the stock one was also with that angle my Friend Anyway if it works for you we both are happy 😉👍🏽 Nice regards ✌️🏽 😊

[@michaelmcdonald1620]

Pretty sweet.. how does it drive compared to stock?

[@a-ztube]

Hey my Friend thank you and you're very welcome 😉 👍🏽 Hmmm hard to say nearly the same no big difference maybe the stock shocks are smoother and now it's heavier so in some points really better hope that helps 😉 👍🏽 Stay safe ✌️🏽 😊

[@jjvizms]

Awesome, thanks for taking the time and detail. 👍

[@a-ztube]

Hey my Friend you're very welcome 😉 🙌🏽 and thank you very much ☺️ 🙏🏽 Have a nice week 😉 👍🏽

[@STP_RIDGELINE]

Sweet upgrades mi bug bro👍👊💯❤

[@a-ztube]

Thanks bro 😍 🙌🏽 have a nice one and stay safe ✌️🏽 😊

[@azihanjihan3361]

very nice guys, good idea,,,,

[@a-ztube]

Thank you very much my Friend you're very welcome 😉 👍🏽 Stay safe ✌️🏽 😊

[@renercadventures]

Your are amazing,nice video keep it up😘

[@a-ztube]

thank you very much my friend :D you're very welcome ;) and the same to you stay safe

[@TonysRcTechboom]

Absolutely fantastic Upgrades and a fantastic Build. Its up to you but I would paint the Body Matalic Green with chrome to Match the Upgrades, also throw a Green Led light Illuminating on underneath 😀 but thats just me brother 🥰 really enjoyed every single minute as always Brother, Have a awesome weekend 👍😎🥰😎🥰👍

[@a-ztube]

Thank you so much Big Brother 😍 😘 It's an great idea I have Some ideas with lighting in my mind and stuff like this,but to be honest I thought to keep the Body stock in White, but if you said this to me in this Crazy color and I didn't paint one of my Rc's till now I'll do it when Iam finished with detailing like you said 👌🏽😍🙌🏽 Then I need some advice from you 😁🦾💯 Stay safe Big Brother ✌️🏽 😎 🏄🏽

[@wyattgeneix1998]

why my shock absorber are very strong ? i have thé same as you

[@a-ztube]

Strange man 🤔 when did you bought them?

[@wyattgeneix1998]

@@a-ztube Aliexpress

[@a-ztube]

Hey man maybe that's the problem not same quality 🤷🏽

[@abulinasroute8848]

Whats app youtube🤪 Beste youtuber

[@a-ztube]

Ja ha ha 😂 danke du bist der beste ich laufe nur hinter dir ❤️🌷🥰😘

[@abulinasroute8848]

@@a-ztube 🤪😃😃🤣🤣🤣😘😘😘😘

[@a-ztube]

🦾💯🌷🎆🤛🏻

[@DestructionRC]

Awesome bro 👍🏻

[@a-ztube]

Thank you very much bro for your kind words 😍 🙌🏽 Stay safe ✌️🏽 😊

[@spiketwo666]

how to know the length of the links etc?

[@a-ztube]

What you mean exactly mate?

[@spiketwo666]

@@a-ztube how to adjust to length of the link rods? say if i do not have the plastic one to compare with?

[@a-ztube]

Only on how the car drives 😉 needs good driving and damping

[@that_white21]

Yo nice rims I got a pair too

[@a-ztube]

These looking good bro like them very much 👌🏽 😍

[@matejandrisek809]

Waiting a video for testing that suspension ,what i saw here il make a copy :D

[@a-ztube]

Hey my Friend you're very welcome 😉 👍🏽 In the 3rd video I'll do some test drive still needs some more metal and details,but I think it'll be an most never ending story 😁🙈 If you put a little oil in the shocks they work very nice ✌️🏽😊

[@schpreck]

I wouldn't, if you do what he did you will have basically no steering to the left.

[@matejandrisek809]

@@schpreck i dont get it , how ?

[@schpreck]

@@matejandrisek809 When the steering horn moves to the left it will go up and lose leverage. To run it this high you either need to lower the servo or you need a longer servo horn and link. But then you also need a radio that you can adjust end points or you will burn out the servo. I did basically the same thing myself, then i cam to the conclusion that it is just better to use the stock shocks and switch the lower attachment to a ball type one. WPL sells the parts on their site. The reason this all happens is because these shocks and the axles and links you are using too are actually designed for the MN90 not the C14/24. They just happen to almost fit. So sellers claim they are for them.

[@a-ztube]

Hey my Friend you're very welcome 😉 👍🏽 No that's not true I have perfect steering to the left,maybe it's because I have the Shocks not tighten 💯% into the Bracket that the hole where the screw goes through have play 😉👍🏽

[@mrbutchee1]

I wanna seem some vid of it running after the upgrades.

[@a-ztube]

Hey my Friend is coming up 😉👍🏽 Stay safe ✌️🏽

[@mrbutchee1]

@@a-ztube what size shocks go on the truck?

[@a-ztube]

Hey mostly anything that can fit, but I wouldn't take longer ones than these 😉 By the way I made an small update driving video think I'll upload it tomorrow 🤜🏽🤛🏻

[@wreckender7]

You should add metal tow hooks

[@a-ztube]

Will come my Friend 😊 👍🏽

[@wreckender7]

@@a-ztube that's going to be cool I lost my tow hooks when I went mudding lol

[@a-ztube]

Oh no 😂🙈

[@wreckender7]

@@a-ztube they were fun while they lasted

[@mtrccrawler6300]

Siiick bro!!!🔥🔥👍👍👍💯💯👊🏼👊🏼🤙🤙✌️

[@a-ztube]

THX Bro 😍 💥🤜🏽🤛🏻

[@DelDredd]

Rear shock top mounts very loose, needed a spacer, using a 2.5mm screw through a 3-4mm hole is not very good. Will wear out the mount hole in the shock in no time as the shock wobbles about.

[@a-ztube]

Hey my Friend thank you very much for your advice 😉👍🏽 Nice regards

[@pheaktratoy8163]

Tgats awesome dude

[@a-ztube]

THX buddy you're very welcome 😉 w

[@YOOPDLRC]

so cool 👍😊👍

[@a-ztube]

Thank you very much my Friend 😊 👍🏽 you're very welcome 😉 Have a nice weekend 😊 🙌🏽

[@nicholas2941]

Should show a vid of it crawling

[@a-ztube]

Is coming my Friend first the last video with everything metal that's possible with crawling footage in the end 😉👍🏽 Stay safe ✌️🏽

[@nicholas2941]

Thanks man

[@a-ztube]

You're Welcome my Friend 😊 👍🏽

[@mysteryfloh]

Gutes Video wie immer 😃

[@a-ztube]

Vielen Dank Bro 😍 😘👍🏽

[@if_not_fixed_its_broken]

Sud really use lock tight mate, bet you lost a fu screws on the trails.

[@a-ztube]

I've done if not you're right 100# 😄👍

[@Rc_Alex_76]

Brilliant

[@a-ztube]

Thank you very much my Friend you're very welcome ☺️🙌🏽

[@mamangsuprirc5178]

how about body

[@a-ztube]

Hey my Friend maybe in the future we'll see 😉👍🏽

[@NyamukBalaprc]

nice bro

[@a-ztube]

Thanks a lot bro you're very welcome 😍 🙌🏽

[@garretrogers9893]

Shock angle no good with factory holes

[@a-ztube]

Yes 😉👍🏽

[@rustycage4790]

Doesn't fit with the two speed gearbox.

[@a-ztube]

This could be mate I didn't want to install it 😉👍🏽

[@nekonekochannel4241]

Amazing..

[@a-ztube]

THX my Friend you're very welcome 😉 👍🏽

[@nekonekochannel4241]

👍👍..🙏🙏

[@marggrenier3030]

amature where are the shock spacers you cant run shocks with out the bolt spacers

[@a-ztube]

Amature? What you want to say? And what spacers do you mean? You can see in all the other videos even the wpl c54 build video that the car drives like this 😉 So I think your upset because of what? And want to say amateur?

[@andrewsalmon4914]

Why don't you put hobby grade electronics in it

[@a-ztube]

Maybe in the future 😉👍🏽

[@RCROVA]

Subscribe to your amazing channel~~

[@a-ztube]

Thank you very much my Friend you're very welcome 😉 🙌🏽

[@sdqsdq6274]

man they should have sold the truck like this, lol

[@a-ztube]

From the look definitely mate 👌🏽😁😍

[@bagged5178]

the metal may be good but why would you leave stuff so loose, at-least use washers or some sort of spacers, and the suspension seems so stiff, loosen it please man its just not isnt

[@a-ztube]

Hey man thanks for the advise, but I think you didn't watched all videos 😉 👍🏽 Have a nice one

[@bagged5178]

@@a-ztube but what about the overhanging screws?

[@ahfai1705]

🍃👀🍃

[@a-ztube]

😁👍🏽

[@dlewallen112991]

One issue for sure, is your shocks are too long. Plus, they should be straight up and down or angled in, towards center of chassis (length wise). Not angled out, toward the rear. That rear axle looks really angled as well. Those should sit level, unless the vehicle is so high. Also, the rear 4-link suspension is upside down, or you need to make top two shorter and make bottom two longer. That's not a canopy, that's called a body. I definitely wouldve done things differently.

[@a-ztube]

Thx for the advice and for stopping by buddy, surely there's a lot you can do, but at this time that's what's available for it nothing is close to perfect, but drives and looks good 😉..... your the pro Iam not just do the things simple and with what I have 😉🤜🤛 Stay safe 🫵

[@dlewallen112991]

@@a-ztube No problem! I'm no pro. Lol I'm glad it's working for you.

[@a-ztube]

@dlewallen112991 😉🤜🤛