Renault Clio 1.2 16v Immo Off

this video shows how to remove the imobilizer on a Renault Clio 1.2 16v from 2002 with a Magneti Marelli 5nr2.c2 ecu
hope it helps someone.
if you like this type of content please dont forget to hit that like button
and consider to subscribe to help the channel.
thanks for watching

[@salahayad3726]

merci beaucoup❤

[@gameiro59]

I've tried that on the same ecu and it didn't work. The car just starts the first time and after that, it doesn't even crank. I suppose you have to cut the immo line and jump the starter relay. I'm gonna check because the iaw 5nrc2.c5 has a different pinout for the immo line and it's easy for immo off.. If you don't cut the immo line, the red light for the immobilizer won't flash if you use the key with the transponder.

[@autoteq299]

Hello thanks for this valuable information I just wanna ask you about xprog did you do rework on it or or did you just buy it and start using it ?? Right away

[@PSICompanyPerformance]

thanks for watching that depends on where you buy it , because i have a xprog that i had to rework it, but, this one in the video it was plug and play. good luck

[@autoteq299]

@@PSICompanyPerformance oh okay so any recommended website where doesn't need rework??

[@PSICompanyPerformance]

@@autoteq299 yes there are several but you can find these on ebay and dont forget to see the review from the buyers. good luck

[@autoteq299]

@@PSICompanyPerformance thanks

[@felipegomes6832]

Hi, I've recently had to buy one of those immo off modules cause the original module of my Clio went base. It works, it has the same broken pin as the one that you done in the video. The only that bothers me is that everytime i turn the car on again, if i dont wait the injection light to go off and turn the car on straight away, the injection light remains on all the time and the car behaves strange, like failing sometimes, until I turn it off and wait for a few minutes for the memory to clear itself. Does this happens in this car too? Is there a workaround?

[@PSICompanyPerformance]

Thanks for watching. It doesnt happen in this car or all the other car i have done so far... it can also be something else other than the ecu...have diagnose it ? It can also be a faulty ecu but it has never happened to me. Good luck

[@massinissaautoscan]

I have two ECU old one and the new one , can I put the eeprom of the old one into the new one ? does it work? without doing immoff

[@PSICompanyPerformance]

thanks for watching yes you can and it will work. good luck

[@mohammedhossani1375]

Merçi pour la video

[@PSICompanyPerformance]

Thanks for watching.

[@MotazAGR]

i cant find this part on my Clio its a 2000 model so i suppose it has a different ECU and a different location?

[@PSICompanyPerformance]

Can you tell me what ecu do you have

[@rmt5820]

Hello and regarding from Sweden! It's possible to swap that chip from one Ecu to another Ecu to could start the car after engine and Ecu swap?

[@PSICompanyPerformance]

Yes you can swap eprom for start. Thanks for watching. Good luck

[@boostv8chevy457]

Can someone help me with a solution to complete disamble renault megan 1996 immobelizer?

[@rubenvigario3717]

Boa tarde. Tentei procurar informações sobre a empresa. Onde estão situados? É possível contactar para fazer o mesmo serviço num Clio 2ph2 2002 1.2 16v? Obrigado

[@PSICompanyPerformance]

Thanks for watching. This is a how to video and its not a promotional video for our business. If you want you can post your email and i will contact you directly.

[@rubenvigario3717]

@@PSICompanyPerformance vou tentar enviar mensagem com o meu e-mail. Tenho um Clio 2 1.2 16v com a mesma referencia e precisava anular o immo. É possível deixarem o vosso e-mail para eu vos poder contactar? Obrigado

[@allmor77]

hello my ecu is iaw 5nr2.TI1 i need immo off on ecuvonix database no such ecu but it,s similar with yours ...do you think this solution is also work on my ecu?????/many thanks

[@PSICompanyPerformance]

Thanks for watching. Yes i believe it will work. Good luck

[@allmor77]

@@PSICompanyPerformance I enjoyed watching your video...keep up the good work