Renault Master 3 Gearbox Rebuild

Renault Master 3 Gearbox Rebuild (bearings replacement)
There are 2 movies that helped me a lot:
• Video Aula de Montagem...
• HOW TO REBUILD VIVARO ...

[@giusemancuso]

thank you for sharing mine truck make the same noise in 5 and 6 gears only

[@stefanmilitaru6409]

the noise was exactly "whistle". Mine was only in the 6th gear. I can't explain why.

[@Xiaomi8-ud6zd]

Pozdrav.. Koje ulje da stavim u manuelni menjac 6 brzina,Master 2.3dci,2015 godina?

[@TTRVision]

se pare ca principala cauza a uzurii rulmentilor de la arbori este carcasa cutiei care strange (preseaza) prea mult. am 95% aceeasi cutie pe Megane RS si am fix problemele astea :) se poate aleza din carcasa in lacasul rulmentilor insa determinarea cotelor este problema. (in Romania)

[@stefanmilitaru6409]

Nu stiu daca aceasta este cauza. Reglajul rulmentilor se face pe fiecare arbore cu o saiba de grosime exacta, calculata din fabrica. Acelea trebuie lasate unde au fost, (nu se vad decat dupa ce se depreseaza rulmentii), si au rolul de a aplica rulmetilor o incarcare initiala.

[@TTRVision]

@@stefanmilitaru6409 kzbin.info/www/bejne/a5nLqGVoapuqjMUsi=DcpXZUPVXZvjqpS_&t=859

[@davidszabo3830]

Hi, I have a similar problem. What are the factory bearing preload values? The operating instructions only take into account the current pad. If the gearbox is disassembled, the washer may not be from the factory. So the calculation is also wrong.@@stefanmilitaru6409