Repacking Linearmotionbearings Ballscrews

video shows you how to repack linearmotionbearings2008 ballscrews.

[@chrisnurse6430]

Ten years later you’re still helping people getin’ outta the shit 🥳

[@TheFaiz57]

Amazing tutorial thanks for uploading this video and i appropriate your effort how you took care of making a clear video so everyone can understand easily.

[@thedream7504]

I thank you because thanks to you, I was able to repair my ball screw. Mercy a lot

[@klazzera]

i was planning to do a video on this method until i saw your video. i think this is the most reliable, easiest and fastest method to repack a ballnut. i can't really understand why people try to place the balls on their track one by one, using grease.

[@sgspenceley]

Thank you for posting this. It saved me a lot of time!

[@chrisnurse6430]

This was the clearest foolproof way to get the balls in the right place

[@MarshallCNC]

This video saved my sanity! Good job and Thanks!

[@martinbarfoed5040]

Thanks for sharing. Very helpful!

[@underourrock]

BTW: I would give you 2 thumbs up, if KZbin would let me, for your to-the-point explanation and presentation in this video. Lots of good info packed into it.

[@glennedward2201]

I want to state this is the best method to put the nuts back together. I tried others and almost threw it away and bought another despite I had to machine it for better fit. Sadly I installed it backward for what I wanted but it only costs me 8mm of travel. You won’t find me ever doing that again.

[@Fliperakis13]

life saver thanks!!! ;)

[@buzgraham4308]

Thanks for sharing saved me a heap

[@pbjscreenset3394]

Thanks, this was close to driving me mad:)

[@umargul5644]

Great job thanks sir

[@underourrock]

Really good video. It would have helped to see a little more detail on how you marked the start of the screw. I get the concept of where you put the sharpie mark, but having a good visual on where the sharpie is and what the screw looks like relative to that mark is much better to see first-hand.

[@Emma-yo2bq]

Thank you for posting this video, very clear and now I understand how they go together I am not afraid to take mine apart if I need to :-)

[@italogarcia1597]

Muito bom o vídeo

[@fefernan87]

Hi! Thanks a lot for sharing, otherwise I'd never had a clue as to refill my 2005 nut. Do you know if the bearing of the 2005 are the same size as the ones for the 1605?

[@lambonumber5]

Brilliant... saved me buying another ballnut

[@diyextreme1]

can you please guide me how to get these repacking balls for different diameters it will be really helpful for me thanks

[@annabiagetti549]

hi, can you tell me how many number balls have a nut type 2505-4 ?

[@heeder777]

So when you retired from herding cats you moved onto repacking ball nuts. I’ve also seen guys dropping in the balls into the screw from the removable silicone inserts. Either way nice job! The screwdriver comment cracked me up because these little ground balls are harder than sun aged cow shit. Lots of luck scratching them.

[@JPurontong]

this way is better than putting a lot of grease

[@Xnaron]

Did you repack with larger ball bearings? 0.1265"?

[@MultiBruho]

Спасибо. Правда я уже сам разобрался как это делать, но всё равно нужное видео.

[@mariuspetcu7482]

Great job mate, but Yeah, that's was easy with such Huge Screw (LOL) ... tray to do that with my SFU1204 with 2.381mm balls ... I lost 4-5 of them on a floor and of course I never found them and I end up now with an 70USD Useless Screw (CRY) .. . Thank You

[@papslab]

Thx

[@henrymcgee9420]

good not to use a metal screwdriver scratches the inside of nut , still a great video

[@JaakkoF]

Hardened nut, so a regular screwdriver does nothing to it.

[@joshuafreeman6720]

Yep too hard to damage

[@rals77]

Dear Friends, a question how many balls must have a Ø40 Diameter Spindle Step = 10 mm with recirculation tube, there is some formula to know the number of balls, thank you very much for the attention Ball spindle code is 4010-2.5

[@AandHAutomationllc]

lesson to take away is not to drop your balls

[@norahung588]

Wei Tai Transmission Limited Company is the head office in Taipei and acts for all of international trade activities to handle the shipment supplied from Shen-Han Shenzhen factory. We are looking for the new customers in your regions and it’s thankful if you can give us a chance to work together with. Please feel free to contact the following: Wei Tai Transmission Limited Company Email: [e-mail] We chat ID: w0978377508 You tube: kzbin.info/www/bejne/Y2nOc4mDaa92eMk Website: www.weitaitw.com/en/ball-screw-nut.html FB: facebook.com/hung.nora.3 Cell phone: [phone]

[@norahung588]

ball screw passion as well. Wei Tai Transmission Limited Company is the head office in Taipei and acts for all of international trade activities to handle the shipment supplied from Shen-Han Shenzhen factory. We are looking for the new customers in your regions and it’s thankful if you can give us a chance to work together with. Please feel free to contact the following: Wei Tai Transmission Limited Company Email: [e-mail] We chat ID: w0978377508 You tube: kzbin.info/www/bejne/Y2nOc4mDaa92eMk kzbin.info/www/bejne/oIK6Y2Z4rZpsjbM Website: www.weitaitw.com/en/ball-screw-nut.html www.weitaitransmission.com FB: facebook.com/hung.nora.3 Cell phone: [phone] Address: No. 214-3, Zhou Mei Street, Bei Tou District, Taipei, Taiwan, R.O.C. Tel# [phone] FAX:[phone]