Repair Bricked Modern MTK SoC Devices Using SP Flashtool (New Method 2021)

[@EmilianIfrim-fx7ip]

THANK YOU SO MUCH I LITERALLY THOUGHT MY PHONE WAS DEAD THIS IS THE ONLY VIDEO THAT WORKED THANK YOU!!!

[@aimusicalcovers]

only video that worked, i have been looking for solutions for weeks and in that process i have watched 100's of videos to no avail. one video made my soft brick to hard brick, yours is the only one that works without issues.

[@kabirmalik4955]

Thanks alot man it worked on a tobicon soc MT6765

[@bdggamingyt5912]

thank you so much even the realme service centers refuse to recover we you did thank you

[@crack_channel]

thank you brother. I searched for this problem since yesterday. I just got it in your channel, thanks again ❤❤❤

[@STUMBOBOY.STREAM]

I Just subscribed BCS this is the only method which worked on my Mobicel Force

[@nolascobaraquel4270]

Still working at this moment. I revived my bricked infinix zero 8. thanks for this tutorial.

[@appleagulto1550]

I just recently unbrick my realme 3 using All in 1 opf extractor and brom bypass tool and its works 100% to my device and other mtk devices . And credits to this video because i used some procedure here 💯💯💯💯💯💯💯

[@droidtricks3846]

How did you do that I also bricked my realme 3,no charging ,no recovery,no boot,no fastboot. Pls tell me

[@lion7306]

LIFE SAVER!!!!!!!!!!! WORKING ON MOTO E7 THANKS A LOT ✊✊✊

[@rudraprasadbadatya4365]

Thanks for the life saver video 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 I pulled out my Panasonic phone from dead to alive position again

[@mega_info]

The best tutorial so far on the internet ❤

[@mbuhjoel2714]

THANKS A LOT, IT WORKS LIKE A CHARM

[@santoshkumarbadatya1655]

thank you bro you saved my 10000 bucks

[@Roaming_Roads00]

wow very dangerous working bro thnx a lot u a god to me 100%

[@abhishekkadam3174]

My phone is not showing in libusb please give me solution

[@sodaside6476]

THANK YOU BROO😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘😘

[@johnvincentbonifacio4780]

OH MY GOD THANK YOU SO MUCHH!! I WILL HUG YOU RIGHT NOW IF I COULD MAN

[@HowToJack]

saved me from my father's beating thanks

[@naderahmed8299]

hi, first, thank you, its loading rn. but i had a problem, see, idk why, but i have a problem with every pc/phone/usb device. so first the libusb, i added the filter to the usb port of my phone, the driver i had is provided by oppo New QcomMtk_Driver_Setup_V2.0.1.1 and the other one is provided by google, so i had to make this libusb install a filter to the google galaxy nexus adb interface: manufacturer clockworldmod __ and the sp flash tool, wont make me choose the com3 which is provided in the cmd as my phone port. it only lets me choose com1. so i tried on com1, but it didn't work, then i choose usb full speed/with battery/ timeout 60 min when i make it auto detect, it writes down to the right "auto detected com3" but still wont work, i made it ''with battery'' it didn't type com3 but still worked. thank you, i wont have to lie to the service center again, i was really worried, this time they were gonna know that it didn't happen on its on lol

[@Fortun.a_Major]

Thnx man, really saved me..

[@Yudibilly]

I have subscribed to your channel,

[@SweatDreams01]

excuse me sir, I followed all the steps but when flashing only the stack on DA is 100%, please reply

[@jimmatrix7244]

What is the key combination for Oppo F9 to connect usb? Please!

[@karkovb152]

OMG THANK YOU! But first thing first please add this to the requirements: "Make sure Mediatek drivers are installed on your computer!" This is my first time dealing with MTK phones and auth bypass type of stuff and I was stuck on the Libusb filter part (It didn't show "Mediatek USB" but instead a generic Microsoft USB) so I have to search around on how to get it right (managed to found a similar thread of this but for Redmi Note 9), turns out I didn't have MTK drivers installed on my PC. You didn't specify that we need the driver to make it work but turns out we DO. But anyway your tutorial is the one that saved me still, so thank you I really mean it. Cheers!

[@vincentjaya.maulino1059]

Hi sir can you help me how to install mediatek driver?

[@74c82]

Thanks. it worked.

[@CarlosEduardoPivato]

When click in Download, I get this error: [HINT]: Verified boot is enabled. Please download signed image(md1img-verified.img) or disable verified boot. Is disabled the boot: [2021-09-28 10:33:02.138418] Protection disabled. Can any body help me? :/

[@CarlosEduardoPivato]

I found a solution for this!!! I only unmark the md1img and my wife phone is back!!! Thanks a lot you and to XDA!!! ❤️

[@santoshkumarbadatya1655]

use the mtk bypass tool it will solve your prob

[@OKamiKAT]

My Realme 3 is on Red State. Can you help me? I've done this process and it's a success but my phone can't boot because of Red State.

[@santoshkumarbadatya1655]

yes just press the all three buttons and click ok in mtk bypass tool and then flash the rom from com port option

[@kenn9349]

why mine in libusb-win32 is showing "mediatek preload usb vcom" instead of "mediatek usb port"?

[@zilchgott]

Ok, nagka problem ako... Sa SP Flashtool > Option > Connection > Connection Setting > UART : Di ko makita yung tamang "Found port" number ko... mine should say "COM4", pero "COM3" lang yung lumalabas. Edit: Nagka problem ako nung una sa "libusb-win32" na app - di rin makapag install ng Mediatek device kasi di siya makita, so sinelect ko na lang yung composite device. Nakaka frustrate.

[@adriandelacruz3018]

ulitin mo yung part ng LibUsb

[@zilchgott]

@@adriandelacruz3018 yep, sir. I think nandun nga yung problem ko... di lumabas yung Mediatek device. Pano kaya solution dito? Thanks

[@adriandelacruz3018]

@@zilchgott try mo uninstall muna yung LibUSB, tapos restart computer, then pag uulitin mo na yung process. sa ibang Port mo isaksak yung Usb Cable mo, if Desktop PC gamit mo masmaganda dun mo saksak sa likod. yung embedded usb port ng motherboard. if ayaw pa din try mo gamit ibang Laptop or PC, (note: mabilis dapat kamay mo kasi mabilis madisconnect ang mediatek device pag deadboot dahil sa WatchDog Timer.)

[@zilchgott]

@@adriandelacruz3018 inulit ko na lang yung command sa python na "python main.py". For some reason, pag check ko sa connection setting sa SP tool, lumabas na yung "COM4". ahaha So, ngayon, meron akong "Download DA 100%" pero red-bar, hindi "yellow-bar". Ang weird. Wait ko if mag error or something...

[@zilchgott]

@@adriandelacruz3018 Update: So, nagka error nga ako. "ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0xC0050001) [HINT]:" *walang nakalagay sa hint.

[@Money_Science]

nsecure device, sending payload using send_da... [ERROR] FOUND SEND_DWORD i am unable to by pass ulear,our 8pro in bootloop please help

[@liamjohnlaygo4330]

Traceback (most recent call last): File "main.py", line 3, in from src.exploit import exploit ImportError: No module named src.exploit Help pooo 😭

[@solidstate7788]

same Oppo A16 CPH2269

[@fj89delta]

what if i cannot find my port under Uart? it will auto detect if i choose usb but will stuck at DA 100% for a long period. any suggestions? tyvm ❤️

[@Jaheen_here]

I faced the same issue. My Port was COM3 but it did not show in Option. So, I went for USB (Full speed). At first I failed, then I made sure 1. MTK_AllInOne_DA.bin is selected in Download-Agent. 2. Selected Scatter-loading file 3. Authentication File left empty. It worked for me.

[@Ryuk433]

Bro will it work in realme 6 plzz reply bro it is very important to me plzzzz 😭😭🙏🙏🙏🙏

[@Ryuk433]

Bro my phone can't open bootloader and custom recovery what will I do bro plzz help me😭😭😭

[@itsfuntime3109]

My bootloader locked realme xt is displaying only the logo. Boot /img destroyed and restart automatically. No way to go to recovery, system or fastboot mode

[@tanjirokamado8294]

we have the same problem , btw did u fix ur device

[@itsfuntime3109]

@@tanjirokamado8294 Yes

[@tanjirokamado8294]

@@itsfuntime3109 or i message u , my phone Xiaomi 11T(agate) still bootloop and cant access recovery and fastboot

[@tanjirokamado8294]

@@itsfuntime3109 just badly need help from someone who encounter this problem

[@MirrorMan-ey8pv]

how bro please help...;)@@itsfuntime3109

[@brandong.8411]

my MT6771 has an error status SEC_IMG_TYPE_MISMATCH HINTS* DOWNLOAD SPM_1 SIGNED IMG or disabled verified boot how to fix this error sir? badly needed to flash my phone for bootloop and hang on logo

[@jigenyuzon]

PLS HELP ME WHEN IT COMES IN FLASHING, THE HINT IS RETRY NEW CABLE, NEW COM PORT, NEW DEVICE, ANOTHER PC. THATS THE HINT

[@aykutsenses741]

Fantastic, I have the same problem on my phone, huawei y5p, please help me, there is no reaction, recovery and fastboot mode does not open, but there is a computer connection

[@santoshkumarbadatya1655]

follow the video properly you will get your phone back because i have retrived my tphone from this method

[@rockyvlog4087]

Thanks....for video....

[@nandkumarsahu1605]

Doesn't work on modern MT6877 cpu based device like oppo Reno6 5g

[@jigendilleyuzon6217]

its not working. when i flash my devicee its stay only on da downloading then error will appear

[@neilcomrade9516]

Can you make a video on OnePlus mtk devices how to unbrick

[@winnardalba6258]

Sir paano po ba pag sa cmd pip is not recognized as an internal o external.... Nka lagay?

[@russel5361]

same question here any update sir

[@raymondpascual4467]

Naayos mo naba to boss?

[@bilalmeziane]

Does it work on locked bootloader?

[@tiktop101]

Sp flash works wonders

[@AyeAyeRon-hu4xi]

Hello! Nag wwork po ba to sa any realme phones? like realme 6i? basta mediatek yung processor?

[@furryonez788]

The best

[@samuelsamin1643]

Awesome video sir , my realme 7 has been stuck in bootloop , no access to recovery or fastboot or bootloader is possible , it's infinite bootloop is it possible to fix in this way? please help

[@HollyShitz]

C:\Users\KAPLAN\Desktop\Bypass_Utility>pip install pyusb pyserial json5 'pip' is not recognized as an internal or external command, operable program or batch file. ???????

[@ultraxgamer510]

will this work on mediatek g80

[@janmeersoftware3824]

Error After typing Python main.py How to solve No module name 'usb'

[@netboomtest2881]

bro why is my phone keeps disconnected whenever i try to connect it and my phone had this problem pls help thx

[@gamerschoytv3791]

Pwede po ba sp flash tools Lang gagamitin tapos direct na download ung firmware

[@AiCoverse]

sir will it work on infinix ? Because I want to downgrade my phone

[@mothertrucker1262]

lifesaver

[@Youtubee-g1p]

brother any video for qualccom snapdragron proccessssssor?

[@MessiBetterNoCap]

qualcomm a bit complicated it does need to Test the EDL mode

[@Shamsaboubkr]

when i run the command and the process reach "disabling protection" it just stops without disabling protection

[@santoshkumarbadatya1655]

you dont run the command there is a app called mtk bypass tool just open that and click on ok or run which ever option is availabe you will be good to go because i did the same thing

[@jojiemadarang714]

Com 1 lng po yung meron sa flash tool kopo

[@arielcaranay3276]

ask lang po . Pano nio nakuha yung scatter file ng firmware ng phone nio?

[@pduong204]

thanks

[@SonNata]

Help, COM3 does not appear

[@thepepper.9935]

help me pls, no waiting for bootrom;( what should i do?

[@harveyjayan709]

hi sir! gagana kaya to pag ginawa ko sa realme 6i? namali po kasi ako ng file ng firmware balak ko po sanang mag rollback dahil naglalag ako sa Android 11. sana matulungan nyo po ako sir.

[@sherlockholmes4602]

Can you please help me? I have a Realme GT Neo. I picked Format All + Download while flashing and now my phone wont work. Any flashing wont help and its stuck in bootrom mode.

[@GodlxCrow]

Yah i can help

[@rfncmaximus1038]

@@GodlxCrow how ?

[@BreakerMan-u1j]

I got the error after bootrom "notimplementederror: can't find 0x699 hw_code in config"

[@louiegearobo736]

same problem. did you find any solution?

[@Seohandsome]

Boss di na po ba kelangan ng opf file rekta na po ako sa scatter file ? Tagal ng hard brick rm3 ko buti nakita ko tong vids . salamat po

[@free_internet2022]

How flashing blackview a95 dead after frp

[@r.e.tamayo936]

Why would you install phyton in Microsoft store?

[@androidenthusiast4943]

bro i get errors on bypass brommode

[@dereference98]

In The UART COM port showing nothing

[@neilpatrickvallido6220]

Incorrect hw code, expected 0x813, found 0x707

[@runaway3189]

hello bro did you find any solution for your problem of incorrect hw code :(

[@apkcheating5175]

I bricked mtk device'spreloader and know the PC detect it as unknown usb can you help me? Your tutorial can't help me because I can't detect the device correctly

[@apkcheating5175]

It says 'device descriptor request failed'

[@XDReturns]

@@apkcheating5175 fixed?

[@apkcheating5175]

Not sure🙃

[@apkcheating5175]

@SIDHU MEMES Try different pc

[@gr8d.333]

Boss pano kaya tong sakin? Vivo Y19 device ko, dati nagagamit ko mtk auth bypass tool dito ngayon ayaw na, mag flash sana ako stock rom e mag downgrade ako. Triny ko na din tong method mo kaso lang ayaw kumagat sa python kapag ginagawa ko na, di siya nareread, unang gamit ko python 3.7, sana matulungan mo ko. TIA

[@gr8d.333]

Android 12 na tong version ng os ko*

[@jorycollins1744]

ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005) sir I keep getting this error on my realme c12 but I followed every step and used correct firmware any help will be appreciated

[@crazykudii2230]

DID YOU FIND ANY SOLUTIONS???? SAME ERROR PLEASE TELL

[@jorycollins1744]

@@crazykudii2230 nope just go to service center and replace motherboard

[@crownwearer6154]

Any solution bro?? Yet??

[@jorycollins1744]

@@crownwearer6154 new motherboard

[@robertbhava]

My phn isn't detecting in Device Manager

[@zedsh7095]

Sir pwde ito sa samsung j1 sm-j100ml kasi di napo sya nag OON e

[@JMRVRGS]

Boss paano kung USB Device not recognized? Tipong parang nagdi-disconnect siya ayaw mabasa.

[@kennethdelan1421]

install ka muna mtk drivers

[@majkel3702]

Did you fix it? I have the same issue..

[@JMRVRGS]

@@majkel3702 Binabalik lang namin sa customer service tapos inaayos nila. Sinabi lang namin nag-update tas ayaw na bumukas.

[@lukatsindeliani3267]

can i use same method on soft bricked xiaomi poco x4 gt? bootloader is locked BTW

[@EL_PSYcongroo]

is ur device is a mediatek device

[@lukatsindeliani3267]

@@EL_PSYcongroo yes, I already repaired in the service center

[@EL_PSYcongroo]

@@lukatsindeliani3267 my device is hard bricked rip

[@EL_PSYcongroo]

@@lukatsindeliani3267 idk what to do

[@lukatsindeliani3267]

@@EL_PSYcongroo is there any authorized xiaomi service center in your country?

[@norwindaveramirez6089]

Nc sharing, Lods Pano gawin sa router modem na mediatek chipset openwrt firmware

[@badayosjakeryan1496]

i know the steps but my ph9ne is not booting to realme white so i can flash it or no?

[@santoshkumarbadatya1655]

you can flash it this the video for totally dead mobiles without boot so you will definetely get your phone back

[@MarioBejleri-os4mc]

Mine is stuck on the red download da

[@trongZuFO]

i'm stuck in boot loop and can't escape from it now, i try many solution but cant ! Are you have any solutions for me?

[@feinnOG]

Bro I u done is it working now

[@trongZuFO]

@@feinnOG i dont use realme 3 anymore bro. But follow this method should be working since it basically using like miflashtool, thus if it doesn't work then I have no idea.

[@YasirAly16]

Plz help, miezu m6t hard bricked

[@STUMBOBOY.STREAM]

Please do we use internet connection when using Spflsh tool

[@clarefics5141]

sir can you help me with my problem in cmd when I type pip install pyusb pyserial json5 nothing happens

[@clarefics5141]

it says The requested operation requires elevation

[@adriandelacruz3018]

Uninstall and Reinstall Python, if you are using Windows 10 install it though Microsoft Store.

[@clarefics5141]

@@adriandelacruz3018 sir i have problem ERROR: STATUS_ERR (0xC00100010) can you help me? All our process is almost same except in the flashtool where you click option, I have no option COM3 sir

[@adriandelacruz3018]

@@clarefics5141 you COM number depends on "Found Port" in CMD, after you Type "main.py" you should see your device port. Its not always COM3 it might be COM7 or 8,9,etc. , But if shows nothing in Flashtool i mean nothing to choose, you have to download the Other version of SP flashtool or better if its the latest version.

[@clarefics5141]

@@adriandelacruz3018 Sir I do finish the downlaod phase in sp flash tool and it show successful but after I open my phone it says download not completed,,, power off and download again. Can you help me sir?

[@lostboy7904]

Bro online bnaoge kiay

[@rebeccankurunziza6614]

Does it work with soc mt6768??

[@nof140]

do I need fastboot rom or recovery rom?

[@dxerkin4]

try both, if the fastboot one doesn't have the scatter file it could be the recovery one or viceversa

[@leonelmendoza9174]

Sir yung phone ko po kc ei automatic na nag didisconnect pagkatapos ng ilang segundo

[@leonelmendoza9174]

Sana po matulungan nyo po ako😩

[@adriandelacruz3018]

Please panuudin nio po ang buong process para ma disable nio yung Usb Watchdog timer, para di mo na disconnect yung phone nio.

[@leonelmendoza9174]

Sir ganun po ba yung sa inyo kapag nag connect din po ba kayo sa pc ei nawawala din po ba?

[@leonelmendoza9174]

Kaya po kc nasira yung phone ko ei na flash ko po kc yung maling img file dun sa twrp

[@leonelmendoza9174]

Unlock na din po yung bootloader nito bago pa po masira yung phone ko

[@mrpersonreel]

Is this possible on a cubot note 20 pro

[@MohamedFawzy-bh7pv]

windows 11 mtc not work help

[@elvertandresrodriguez9684]

the imei lost?

[@AyeAyeRon-hu4xi]

Pwede po ba makahingi file ng realme 6i? ty in advance po

[@osamakhaled3341]

As usual it didn't work for me

[@gamerschoytv3791]

Link Ng Sp flash tools idol please

[@ankitnehra5485]

com port is not detected in sp tool

[@santoshkumarbadatya1655]

you have to go to the com port by disabling the protection of boot rom by using mtk bypass tool

[@PaToNCS]

NO WORKING BYPASS Men..

[@santoshkumarbadatya1655]

first use lib usb

[@ivangonzales8311]

hello sir where did you get your firmware? do u have any links?

[@khaiijumdani4149]

realme c2 ?

[@copycat9666]

Showing error bro

[@arevalokristianremsonlonto5141]

how to realme 6 pro