Repair your Calculator's Dim / Faded Display with this method

[@keerthitharan4405]

Thankyou so much bro exatly same problem i faced.

[@zos8085]

Solar Cell calculator has a battery inside. The fix was to remove battery, test it - and it was fine. So the solution was to clean the contacts in the battery holder.

[@RowdyCA]

Exactly 💗👌🏻

[@sw33tkiss94]

It Help me recover back like new one! Thanks Bro~

[@RowdyCA]

Hope that helped 💙.. Thanks for the comment 😇

[@Dan11172]

Ur knowledge in every field is enormous .. keep rocking 👍

[@RowdyCA]

Thank you dani

[@ashutoshmohanty713]

Plz add captions 🙏I can't understand what are you saying 🙏I am facing the same issue..my calculator model is MJ12DA

[@babithaMithresh]

Its use full thank you

[@narendrasrimal6193]

Can you please say me that why my calculator is working at day time only

[@RowdyCA]

Because , Your battery may be weak, or the contact points are not transferring current properly from batteries to the board.. and During day time or under bright light indoors solar panel powers the calculator.. You can check the battery voltage, if it is fine then just scratch the contact points to remove rusts.. it will work properly…

[@khushisinghgaharwar7095]

Sir can you explain in English....I have same problem

[@RowdyCA]

Simple, you have to remove rust from battery connector and if possible apply solder on it to avoid rusting in future

[@khushisinghgaharwar7095]

@@RowdyCA thnk uh sir...👍

[@RowdyCA]

@@khushisinghgaharwar7095 Hope this fix works for you.,, If you have not subscribed to my channel yet., A sub would be awesome 😍

[@noobmasterr9864]

If the title is in English. Pls talk in English

[@RowdyCA]

Yes, I should hv,, But hope, the steps are self explainatory.., even without Audio… I will make an English version soon.. Thank you for the feedback brother 😇..

[@saniakhan4469]

Can anyone say what he is saying in English

[@RowdyCA]

You have to test battery, if its not working even after changing battery, there must be problem with connecting pins, just rub the connecting pins to remove rust or dirt and the problm will be solved.. you can apply solder on pins to avoid rusting in future.. that’s what i said in this video..

[@saniakhan4469]

Thnx 👍

[@tajayedwards150]

Just went in the sun with mine

[@RowdyCA]

Actually the problem is, The calculator works fine in Well lit room or under sun, As Solar panel is powering it, but once the room is dark, the calculator loses visibility as the Battery terminals are corroded and doesn’t provide proper voltage, So what i did is, I scrubbed the terminals and then applied some solder to avoid rusting in future..,