VWestlife, you wanna hear a heartwarming cassette story? I recently bought a 95 Lexus LS400, great shape, has a nice pioneer setup from the factory, all still intact. Found out the deck works. Well, in 2016 my mom died from cancer at age 55, I'm currently 37, so I was going through all my old tapes, and bam, i see one labeled "radio demo tape". My mom was in broadcasting. Fixed the tape and stuck it in, and wow, first time hearing my mom's voice in 6 years. Yeah, I cried. But its also so beautiful, I hear her in my Daughter, and my Nieces. Also, this dang thing sounds good if you play a good recording on it! I might have to bust out the ole deck and show the kiddos how mix tapes were made! Also, all my 30yo cassettes are winning over my 25yo cds LOL all my cds are rotting!
@Italodancer2 жыл бұрын
Yes tapes seems last better. I have many VHS tapes that works very well. But many of my DVD is dead especially DVD-R.
@firenado4295 Жыл бұрын
@@Italodancer how are the cds/dvds dying? I have alot of both and alot are pretty old but still work. but I'm worried now you say that what causes them to rot?
@Italodancer Жыл бұрын
@@firenado4295 Im not sure what is the problem. But its mostly DVD...they simply skip, get corrupted data or simply seems totally empty when put in computer.
@firenado4295 Жыл бұрын
@@Italodancer how odd, haven't personally experienced it (and hope I never do) but then most of my dvds are only about 10 years old so probably not old enough yet. however I have some cds from the early 90s that are still fine.
@JessicaFEREM Жыл бұрын
damn this is making me cry too. what I would've done to hear my dad speak again 😭
@error522 жыл бұрын
Here's a tip for splicing tapes - stick the bit of splicing tape on the edge of your razor and carry it like that to the splicing block. It's a bit easier to maneuver and you don't leave fingerprints on the sticky side. Learned this from a retired radio engineer.
@Madness8322 жыл бұрын
Also, don't attach the tape right over the blade slot.
@dhpbear22 жыл бұрын
The slide cases originated from the Columbia Record Club around 1973. They *really* cheaped out on these boxes as well as the cassettes themselves! Note that there are *no* clear plastic windows in the shells, allowing the tape to be exposed to the elements!
@anirbannaskar76652 жыл бұрын
This takes me back to my childhood when I used to call myself a certified cassette surgeon after fixing several cassette tapes in the same way but using a pvc electrical tape 😂
@LaurentiusTriarius2 жыл бұрын
Hey that was my first job too, also official beta fixer. 8 yrs old me had a lot of time to spare.
@WPPCProductions2 жыл бұрын
Never used electrical tape but I remember in music class in middle school I used masking tape ..
@Jako19872 жыл бұрын
That electrical tape... I think you have to fix those again 😆
@triodehexode2 жыл бұрын
Does any one remember the smell of certain brands of blank tape ?I think scotch were the most distinctive.
@LaurentiusTriarius2 жыл бұрын
@@triodehexode I had a bunch of old new stock TDK's blanks from ~1985, when I opened the dried up plastic wrapper they had that strong scent you only got pre-1990's
@christopher887192 жыл бұрын
That 'cassette salad' brought back memories I had forgotten about cassette tumbleweeds along the side of every main road.
@douglasallen94282 жыл бұрын
I don’t think I have ever clicked on a VWestlife video so early or so quickly in my life…
@devhonk17222 жыл бұрын
Same
@douglasallen94282 жыл бұрын
@Dixene Lee I have had to crack open quite a few cassette tapes myself for many of the same reasons mentioned in this video…
@BedfulPro2 жыл бұрын
same lol
@alexthomson65932 жыл бұрын
Ok.
@igorszamaszow1712 жыл бұрын
I like these glued labels on the plastic cases, a sort of an 8-track vibe going on.
@vwestlife2 жыл бұрын
Unfortunately they bubble up and peel just as easily as 8-track labels.
@markmiwurdz2022 жыл бұрын
Back in the last century, I visited a factory here in the U.K. that made pre - recorded cassettes. The factory was owned by Phonogram, which I believe was a division of Philips. I asked the guy showing us around how they stuck the labels to the cassette shells. He said that they had a system that sprayed a mist of chloroform onto the shell. The chloroform made the surface of plastic "tacky" . Then the paper labels were positioned and placed on the shells by machine.
@rivards12 жыл бұрын
Seeing the unspooled pile of tape reminded me how often you used to see that on the side of the road.
@patricknedz3 ай бұрын
I’m remember that, I guess that’s when they got messed up inside the car and they just threw it out the window.
@blindlemon92 жыл бұрын
I always look forward to a new VWestlife video. Nice to see the good doc perform a successful transplant surgery!
@albear9722 жыл бұрын
"Elbow muscle" 😁😀 This is one of those rare instances that some older items were cheaply made. It's usually the other way around. I used to do that in the 80's a lot with cassettes, thanks to crappy players that liked eating them. I did it the hard way with no tools, except a screwdriver to open the cassette shell, scotch tape and super steady hands on a level surface.
@BrunodeSouzaLino2 жыл бұрын
A trick for getting your cut angle is twisting your elbow as far out as it goes. A lot of engineers would edit tape reels without razors and cutting blocks. They'd use scissors instead.
@andrewlittleboy85322 жыл бұрын
Ideally you want the splicing tape on the back of the tape rather than the playing side. Also when joining leader to audio tape usually it should be a straight splice and angle splices are used for joining the audio tape together.
@pghcoyote2 жыл бұрын
Those Realistic/Radio Shack tape winders with "One Hand & Gear" stamped in the plastic are a godsend. I wore out my original and had to buy another on eBay. Oh, for the days when Radio Shack had neat things like this. I'd look through their catalog like it was a Christmas toy catalog!
@defaultuserid15592 жыл бұрын
I used to fix busted cassettes for everyone back in college so I looked for my tape splicing block after watching this. Located it and also found my old Iron Butterfly Inagadadavida tape in a snap case which had a broken leader. Fixed it and it still sounds great, unlike a lot of my CDs which got bit rot and died. Always interesting videos here so thanks for this one especially.
@gavincurtis2 жыл бұрын
Where were you at my college? Dammit....
@kirkmooneyham2 жыл бұрын
I've got some old tapes that play quite well, but not as old as those in VWestLife's collection. I also have some that won't play at all. I do enjoy cassettes and still record to this day. However, even my oldest CDs (late 80s/early 90s) play fine. And I've moved many times over the years, and some of those CDs got played a LOT. They're scratched some, but still work okay. Never had one "laser rot", so not sure how that happens.
@Twist3rOfficalАй бұрын
@kirkmooneyham disc rot not laser rot, it's where the laminate holding the layers of the disc starts to break down and the layers all start separating causing data loss
@pcallas662 жыл бұрын
When I used to walk to work a lot, I would see cassette tapes strung down the highway after people would be angry that their car stereo ate them. This is definitely a great worthwhile watch, as well as your other videos. The tape actually sounds very good. I know that back in 1972 that cassette tapes haven't quite got the advancement in sound that they did in the 1980s and 1990s. I always thought that prerecorded tapes prior to 1980 didn't sound that great but yet they're probably fine if they're found. Any little mishap with a cassette can result in audio dropping out at that portion of tape. Reel to reel usually didn't have that issue. I remember this guy gave me a reel to reel tape that he recorded in 1957 of his little band he was in and the edge damage was unbelievable. The crazy thing is I didn't hear any dropouts in the recording because the tape moved fast enough and the machine flattened it out in the transport.
@ryanwhittier73142 жыл бұрын
There’s a few cassettes from my mom’s childhood that my great grandfather recorded during Thanksgiving and/or Christmas in the early 70s. Same with radio broadcasts regarding the blizzard of ‘78. That’s one of the only things she has from her childhood and i hope videos like this will allow me to help restore those cassettes when needed.
@life51612 жыл бұрын
I used to have that exact same Emerson Nonboombox. From what I remember it was a treble Box!! I was so excited when I got it as a kid on on my birthday, then I played it and my excitement quickly faded when I heard how little bass it had. I still loved it though.
@sammy611872 жыл бұрын
Who knew watching a guy fix a cassette tape from 50 years ago would be so interesting
@BessieBopOrBach2 жыл бұрын
This was riveting, vwestlife. It makes me happy to spend even just a few minutes a week with someone who shares my fascination with these tiny masterpieces of optimistic mid-century design.
@kirkmooneyham2 жыл бұрын
I've transplanted several old cassette tape reels into donor shells with screws. Stinks to lose the original marked shell, but it's nice to be able to save something you've had a long time and want to keep playing.
@theotherchannel22792 жыл бұрын
11:00 You put the sticky tape on the wrong side. It could cause issues in the long run. When doing a splice you should stick it on the back of the tape, the non playing side so it does not affect the heads.
@Thanson1994152 жыл бұрын
I believe he did stick it to the back of the tape
@vwestlife2 жыл бұрын
The splicing tape I used is smooth and will not cause any wear to the heads.
@pemyers2 жыл бұрын
@@vwestlife I think it's more a case of adhesive from the splicing tape rubbing off onto the heads and rollers over time. If the splice is on the inside of the reel, you avoid that. I've never seen a tape with the splice on the outside of the reel.
@theotherchannel22792 жыл бұрын
@@pemyers Spot on!
@woodenpints2 жыл бұрын
I tuned out for a sec and when I looked up at 5:59 I thought we had a face reveal! 😆
@vwestlife2 жыл бұрын
That's Philips engineer Sander Klerk, who helped develop the DCC.
@TheResistorNetwork2 жыл бұрын
Super helpful video. I have only spliced reel to reel and have a couple of cassettes that need repair. I usually run the razor blade through the splicing block at a 45 degree angle. It gives a nice clean cut.
@Logiman1112 жыл бұрын
I was just about to start fixing a 1970 Los Paraguayos cassette that I like, when I noticed that a few hours ago you had uploaded this video, and I decided to watch it first😃. The DR DCC tip was actually very useful for the job, and the cassette seams broke very neatly with that technique. I now have a working cassette, and my primitive scotch tape splice is even able to withstand the brutal force of my Aiwa's tape tensioning system that tore the tape off the leader in the first place. Thanks for the great video as always!
@M2THE49sGamingZone2 жыл бұрын
As someone born in the 90's, I find this stuff fascinating!
@Narayan_19962 жыл бұрын
You're a hero for saving these survivor/veteran tapes from that time, the very beggining of their success, I loved this whole video ♥ ♥ ♥
@kevinnichols41052 жыл бұрын
I'm really impressed with how steady your hands are! I try doing something like that and my hands start shaking like crazy. Great video as usual.
@PlayitagainVHS Жыл бұрын
I loved watching you restore that old cassette. You preserved cassette history !👍🙂❤️ I taught myself to restore many cassettes over the years.I never knew radio shack had a hand held rewinder.Boy its true ! You learn something new everyday.🙂👍Thanks for the video and keep collecting cassettes. They are so much fun to collect.I love ❤️ cassettes.
@TheEpicOne0072 жыл бұрын
this is genuinely one of the most satisfying videos i have ever seen
@FranklyPeetoons2 жыл бұрын
This video re-enacted much of my childhood
@wrem97062 жыл бұрын
I have some Scotch 271 cassettes with the clam shell mailer cases that date back to 1967 and still play fine, as well as some Norelco cassettes from 1965 w/ no knock out tabs!!
@rhen12152 жыл бұрын
I did this to my ccr Willy and the poor boys cassette a week ago lol crazy that you just released this video
@mosesbrowning80552 жыл бұрын
I've done this many times in old sticky tapes and I've noticed on a lot of the slip case cassettes, they surprisingly did not even have slip sheets!
@christo9302 жыл бұрын
Dude, I love your still shot thing with the cassettes on the operating table. AWESOME!!!
@emancaindec97312 жыл бұрын
It's always fun to play doctor when it comes to restoring old tapes... I have made some restoration projects before and it is one of the most satisfying and rewarding experiences I've had! :) Proud of my cassette tapes collection.
@frankowalker46622 жыл бұрын
Neat trick with twisting the cassette shell to open it.
@giveall96952 жыл бұрын
That last gag was so pure :D When humor was roughless, yet expressive :D
@Twintania2 жыл бұрын
my mom got me a crosley cassette player for my birthday recently and I've been having a great time buying up cassette tapes from audio books to music im actually making some custom cover art for some. I'm glad to see their making a resurgence I've been meaning to buy a player for the past year but I figured I'd buy one that's been cleaned and had the belts replaced
@thomasfuchs782 жыл бұрын
Watching a repair of a 1972 cassette on my 2021 Laptop with 1978 headphones plugged into it. :)
@WPPCProductions2 жыл бұрын
Hi VWestlife.Dealing with cassettes here for almost 50 years.. Yes I did the tape twist thing as your KZbin friend did on those sealed cassettes which I learned years ago..Never dealt with the sticky leader issue here yet. BTW .No offence ..The tape splices should be on the back side .Not on the front "music " side. Same for 8track and reel to reel tapes. Nice to see that the splicing kits are still available..Are they still available.... BTW for those dont know who Flip Wilson was..Just search his name here on KZbin. He was a very funny comic..
@vwestlife2 жыл бұрын
With smooth splicing tape, you can put it on either side.
@WPPCProductions2 жыл бұрын
@@vwestlife OK You have a point there..
@polaris9112 жыл бұрын
I've had the tape snap on a couple from eBay after rewinding. They're pretty easy to fix, just put some scotch tape where the tape snaps off the leader.
@vwestlife2 жыл бұрын
Don't let the die-hard tape enthusiasts hear you say that! They insist that using ordinary cellophane tape to do a splice will cause problems, but I have cassettes that I spliced together using Scotch tape nearly 25 years ago and they still play fine today.
@twocvbloke2 жыл бұрын
I remember when younger just using scissors and sellotape to fix snapped leaders and tapes, never had the splicing block & razor stuff, too fancy for my efforts... :P
@davidg42882 жыл бұрын
Right there were instructions on the box of some reel to reel tapes on how to splice tape using only your fingers and a pair of scissors. The trick was to hold both halves overlapping so the cut angle was the same.
@DRDCC2 жыл бұрын
Glad our video helped a bit. I actually tried it on a regular analog cassette today and the front was cracked. On DCC it works every time for sure.
@vwestlife2 жыл бұрын
I think the clear plastic shells are more prone to cracking than the solid plastic shells. They are also usually sonically welded together rather than crimped.
@DRDCC2 жыл бұрын
@@vwestlife I agree. Only very few analog cassettes have screws, unfortunately..
@Eyetrauma2 жыл бұрын
Tired: surgery on a grape Wired: surgery on a tape
@asmolbean93002 жыл бұрын
"elbow muscle" lol
@vwestlife2 жыл бұрын
I must've been thinking of Jean-Claude van Damme.
@Boemel2 жыл бұрын
@@vwestlife The muscles from brussels, as far i know the only belgian actor who went 'international'. sadly he blew it all on cocaine...
@BrunodeSouzaLino2 жыл бұрын
Only bad thing about those phone opening kits is the metal spudgers can still damage the plastic while the plastic of the plastic spudgers is damaged easily. An alternative to them would be guitar picks. You can get them in packs of 100 and they come in all sizes and thicknesses.
@fellenXD2 жыл бұрын
Old credit cards work pretty good as well.
@FLH3official2 жыл бұрын
I've already worked on old cassettes (leader tape, spring pads, etc.. the usual business) and your video is realy usefull. Thank you, mate! (next step: a video about old broken DAT? I've some... 😉)
@vidtech26302 жыл бұрын
With sticky tapes , I have found that using a Tape Hand Winder contraption , works better at loosening them up , for some reason, than fast forwarding and rewinding the cassette in a cassette deck.
@rum-ham2 жыл бұрын
I love how the airline joke told 50 years ago is still relevant today.
@triodehexode2 жыл бұрын
The Champaign bubbles made Lawrence Wells tape sticky.
@Lagib282 жыл бұрын
I did this soo many times in the 70s and 80s. Also, removing damaged parts of tape mid pack. You left one thing out: what is your solution for re-fastening the shell halves together? I found that liquid polystyrene cement, otherwise known as model glue worked well.
@danieldaniels75712 жыл бұрын
I use super glue gel
@johnlouis38732 жыл бұрын
I have a Soundhog brand cassette from the 1970s where the case opens by pressing the area marked 'press' and the cassette slides out.
@MrDuncl2 жыл бұрын
Soundhog had one of the best trademark characters ever.
@jeffreygorey55402 жыл бұрын
Remember driving down the road and seeing "cassette salad" on the side of the road?
@dennisp.21472 жыл бұрын
Sometimes it was 8-track salad!
@StarionX2 жыл бұрын
I have (well, my parents have) this very album on vinyl. Granted, the track order is almost completely different. It still gives me a huge smile and a laugh to this day, and this was before my time.
@Dwall442 жыл бұрын
Nice video! I hope you have more of those 10 minute cassettes, those are my favorite type. Very old cheap cassettes with no obvious branding.
@stevesstuff14502 жыл бұрын
Those cheap 10 minute cassettes were big business in the early/mid 80s.... They were used with the early home computers; Sinclair ZX81 & Spectrum, Commodore 64, etc. for storing typed-in programmes/ data.
@vidtech26302 жыл бұрын
That particular 10 minute cassette , looks like it has a TDK bubble slip sheet.
@dayvancowboy98332 жыл бұрын
I had The George Benson Collection cassette tape brought from the thrift store, and it was so squeaky while playing. As an amateur, I fast forward and rewind it dozens of times, applied a tiny amount of silicone spray on reels, and finally cleaned the shell and the shield, which somewhat fixed it. After playing a while, the cassette deck decided to play both pulleys in the opposite direction destroying the tape. I ended up recording the whole album from a blank cassette tape.
@verastaki2 жыл бұрын
No matter how old or how damaged cassette tapes were, they always play well and Amazing, Crisp Clear for me! Best medium format for Music 🎶 and sound Reproduction Ever Invented! Especially with Full-Logic, Selinoid Driven, AMS / RMS- Automatic Music Sensor Random Music 🎶 Sensor.
@Quacks0Ай бұрын
9:20 For easier/neater applying of the splicing-tape --- and to avoid touching it with your fingers --- I use the pointed tip of an X-acto knife to hold the splicing-tape piece, use the knife to precisely lay it onto the spliced ends of the tape, press it down partially to seat it in the correct position on the tape-ends, pull off the blade from where it's stuck to the splicing-tape piece, and then use the smooth end of the knife's handle to rub firmly over the splice to adhere every bit of the splice completely.
@RossTheGenMan2 жыл бұрын
quick Tip to know what side your on. if you started rewound to side A, then spliced the new leader and fast forwarded to the end and spliced again.. you would be at the start of side B. So based on what you showed on Camera.. when you finished the repair you where at the start of Side B. Also I did alot of repairs to cassettes when I was younger and they where still popular. I couldn't afford a fancy splicing block though.. so I just used regular tape and scissors.
@steviebboy692 жыл бұрын
In the early 80's I had this splicing block type thing and you would press down on it like a stapler and it even trimmed the spice slightly along the edge, it wasnt that expensive and I got it at Tandy Electronics in Australia, AKA Radio Shack. sadly it got chucked out by my mother years ago.
@ChaunceyGardener2 жыл бұрын
I wonder why so many people use knifes, blades or screwdivers to force open plastic. You not only obviously end up scratching but making a dent on it. Always use plastic on plastic! I often use cheap pogs (milk caps) to open stuff. Not only they have a good grip, flexibility, resistance and thickness but you can also add them up (like layers) to make it thicker at a multiple points and create the right amount of pressure to separate plastic with less stress on its structure. But you will need a lot of them.
@adamlipsky80102 жыл бұрын
Did the same thing a few days ago, the original splice failed. An unwelcome reminder of the mechanical nature of my hobby.
@MrDuncl2 жыл бұрын
An easier problem to fix than a scratched LP or, even worse, a failed hard drive or MP3 player.
@appalachianwoman5612 жыл бұрын
I was born in 1979 and I had one of the Fisher Price record players but what I remember buying and listening to music most on is cassette tapes. I had a pink and grey rounded corner I believe Lennox Sound/GPX or some name like that little single cassette AM FM radio player and I had several of the cheaper brand cassette tape walkman's. Often times me and my friend Amber used ours so much that the doors would break off and they'd still keep playing. Oh how I hate those cheap foam round over the ear headphones and I'm glad today we've got things such as ear buds. I honestly preferred my cassette tape style walkman's to the CD player diskman's because even if you walked briskly with those early CD walkman's they'd skip all over the place so forget about using one while riding your bike or rollerblades. Ah I still miss the 80s and 90s. I really enjoy your channel, you know so much about the electronics you feature and take the time to educate others. I wish I could come across some old turntables or just any better one than the Victrola Suitcase player I currently have. After we had a fire several years ago I lost my mother's vintage Pioneer turntable and shelf stereo system so it's been too expensive to try to find any good ones around here. I only managed to get the Victrola suitcase because right before Christmas they went down to $29 for them at walmart.
@IAmNeomic2 жыл бұрын
Sarah Johnson will be thrilled to know that her sassy comeback from 50 years ago has been rediscovered and forever immortalized.
@Phase520122 жыл бұрын
I have a Tony Hancock cassette called "Pieces of Hancock" purchased around 1967/8. I'm nor 100% sure of the year, as I was just a kid. So I assume it's at least 55 years old. It was fine for years but became more difficult to play over time. I tried it recently and it kept getting stuck, I assumed the tape was dead. I was lucky as it was screwed together, so it was easy to open. The tape reel looked OK, no mold or anything like that. Still, I gave everything a wipe down with an alcohol wipe and added the tiniest amount of lubricant to the inside of the shell. Which is when I checked the pinch rollers to discover that one of the metal pins had RUST on it, which I assume was stopping the pinch roller from rotating. I filed it down and added some lubricant to the pin and the inside of the pinch roller; and reassembled it all. Very happy to report that it now plays very well, and sounds fine.
@8_Bit2 жыл бұрын
Nice work. Have you ever attempted repair on an 8-track tape? I'd love to see your approach on that. It seems almost every 8-track I try self-destructs. I assume they're all breaking where the tape is spliced together, but I haven't opened them up to look. Maybe that twist trick will work on an 8-track as well? Or if they're glued, maybe heat will do it.
@danieldaniels75712 жыл бұрын
I’m really good at repairing and restoring 8-track cartridges. There’s a lot to it, and every different style of cartridge takes a different technique to open. And yes, you should always replace the metal splice.
@vwestlife2 жыл бұрын
Yes, I've repaired 8-tracks too. There are numerous videos on how to do it. They do indeed tend to break at the splice.
@shanestewart48142 жыл бұрын
I’ve fixed hundreds of them over a 25 year period when I developed an interest in collecting all types of unspooled tapes on the side of the road and putting them back together and playing them back, beginning around the end of 1984. I never used a splicing tool and I would put the original odd shaped ends together like one big puzzle without cutting the ends off. Which avoids any skipped beat or whatever. No pieces were rejects in my book. Many tapes were like a box of chocolates. Never knowing what I’ll hear next. Some songs I heard for the first time came from such tossed away tapes of cast away sounds. I sure do miss that hobby now that roadside tapes are no more.
@michaelcrowley83392 жыл бұрын
Might just be a GRT thing... I've had to work on many of their 8-tracks over the past few years. They always seem to be the problem carts.
@AMDXplusplus2 жыл бұрын
I have a 52 year old cassette from May 30th, 1970 that plays religious music, and plays fine, plus I found it at the thrift store.
@boggsty2 жыл бұрын
A those graphite slipsheets, I call them “Gripsheets” because obvious reasons. I throw them out every time I get into an old tape
@petersmith19722 жыл бұрын
Thanks for all the info and just love the test card...we have loads...xx
@Boemel2 жыл бұрын
im surprised u didnt have an actual tape splicer, i have one with a roll of tape on it with a button to push like a stapler. i did do a lot of reel to reel, haven't seen that on your channel. goodnight
@jamesdye46032 жыл бұрын
My friend had that Flip Wilson album on vinyl way back. Funny stuff.
@crash_test_dummy_12 жыл бұрын
"This one is not screwed" Good pun lol!
@Derpy1969 Жыл бұрын
Oh, Flip Wilson, don’t ever change.
@nmgt10482 жыл бұрын
Every now & then i have fixed cassettes with a fair amount of success. Practically all of my tapes are those which I recorded myself. I used Scotch magic mending tape for splicing and had good luck with it. When a cassette gets kind of stiff, I squeeze and turn the cassette, check it out, and it usually frees up the tape inside. I have a lot of cassettes that are 40 to 50 years old that are still very good since I bought high quality (Sony, TDK, or Maxell) tape and store them in containers made for these tapes.
@shawn.the.alien4232 жыл бұрын
Man this is like a somewhat ambitious project I'm currently working on. I bought these two cassette sets of the old radio show "Lum & Abner" for my Dad (it was his favorite radio show from a kid in the '40s and'50s). Well, I got the sets (12 tapes total), and every tape had failed. All of the ones I tested did the same thing: they all disconnected from the spool. I think it's from where after the last owner's father bought the sets back in the '90s, listened to them once or twice, and then they sat on a shelf for 30 years. The clip on each spool had shrunk to the point where they were too small to hold the tape on. My project: I'm replacing every spool. My problem: not enough donor tapes. I tried looking online for new spools, but struck out on that. Btw, if you happen to know where I can get empty replacement spools, I'd greatly appreciate it. I've already repaired the first tape to prove concept, and it went fine...like I said, they were only played a handful of times. The tapes are otherwise pristine (and are screwed together instead of glued or heat-joined, thankfully).
@vwestlife2 жыл бұрын
You can buy "C0" cassettes which have all the parts you need. C0 means it has no magnetic tape in it, just leader.
@shawn.the.alien4232 жыл бұрын
@@vwestlife thanks man. Because my other option (and the one I'll probably end up doing due to it being cheaper) is to go to the local Goodwill and buy some junk tapes to harvest the spools out of. I have to replace 22 spools (11 tapes x2), and none of the old spools are salvageable. I was gonna get some last time I was there, but an old woman blocked the tapes with her buggy and refused to move until she had looked at every tape. I left after about 45 mins. Hopefully I'll have better luck next time.
@TheTrueVoiceOfReason2 жыл бұрын
Makes me want to dig out my WIBG top 10 tape, I think that was around '72 as well.
@jeastwood7358 Жыл бұрын
well I took a cassette tape part I've got all the parts but reassembling it especially not twisting the tape has been an extremely difficult operation… And somehow somewhere along the line right in the beginning I lost one of the pins that was on the little corner spool… Makes no sense to me what happened… I don't know if I will ever be able to assemblage… You make it look so easy… But I do appreciate because your hair is the most complete that I have found
@AeroModule2 жыл бұрын
"I had a bad experience with that Lawrence Welk tape." ...if I had a nickel for every time I'd heard that. 😂
@DaleFrewaldt2 жыл бұрын
Do you know of any places that are producing new, or have NOS supply of those slide cases you show at 0:50?
@mchenrynick2 жыл бұрын
If it was me, I would just splice the old cassette tape into the "donor" cassette shell. I can ever remember when Radio Shack used to sell cassette shells with just leader tapes to "stick in" tape from a bad one. Boy do I feel old now :/
@MrDuncl2 жыл бұрын
That is actually how pre-recorded tapes are made in the factory but machines take tape from a "Pancake" duplicating it at high speed and splices it into a pre-assembled C-Zero.
@Recordology2 жыл бұрын
“A donor cassette” 😂
@babyboomertwerkteam56622 жыл бұрын
why is that funny?
@Recordology2 жыл бұрын
@@babyboomertwerkteam5662 because he is maintaining the theme of “cassette surgery” with witty terminology.
@abx13122 жыл бұрын
i have 2 LE-BO branded cassettes from the 70's or 80's and one of them broke the first time i tried to play it. it also didnt have the screws but did have a springy felt pad inside. after i repaired it i found out my dad had recorded steve winwood on it.
@Abitibidoug10 ай бұрын
This video is one I can relate to, having used many cassettes and repaired the odd one. I remember many years ago finding a tape with Creedence Clearwater Revival's greatest hits but the case was badly damaged. For such repairs I had on hand some cheap cassettes, 3 for $2. They're low quality, best for recording voice like talk shows but not for music. They have screws to take them apart, so I used one for a salvage cassette and it worked well, I still have it. I recall using these cheap tapes to salvage other tapes as well.
@rirkc2 ай бұрын
VWestlife yelling, "weeeee!!!" is the funniest thing ever.
@phononut2 жыл бұрын
I'm definitely stealing that phrase "elbow muscle".👍
@AMDRADEONRUBY2 жыл бұрын
Yeah for my part I'm not Good fixing small stuff but I'm good for watching your videos have a nice Thursday.
@RetroSteveUK2 жыл бұрын
Awesome stuff. I LOVE cassettes!! 🤩
@FBAV2 жыл бұрын
Good job you did there. Recently did something like that. Second hand tape deck sold as "brand new" screwed up one of my old tapes... I had to cut a piece of tape off that was just ruined. Without any toolkit or donor leader tape... Put the leftover good tape into the reel without any leader at all. Think all I used was sciccors and a screwdriver... Just warning you; watch out for "restorated fully checked as good as new" tape decks "with guarantee" (you'll never get) sold at ridiculous high prices on the internet; 9 times out of 10 you're being cheated.... Better buy 10 old decks for almost nothing... 9 times out of those ten you'll have at least ONE working ok and you might be able to fix another two by exchanging parts
@Time4Technology2 жыл бұрын
Great video, and great endcard! :-)
@jeanmank742 Жыл бұрын
I have all three cases. This is my new project. I must save my beloved Christmas cassettes (some over 50 years old!)
@thomasball36582 жыл бұрын
Flip Wilson was fantastic.
@SDsailor72 жыл бұрын
Great tutorial! But how did he secured the shells? Did he glue them or did he had the ones with screws? Thank you
@dansmith30852 жыл бұрын
I have a super rare Stephen King audio book cassette that I need to repair like this.
@X-OR_2 жыл бұрын
Here Comes the Judge
@allthegearnoidea67522 жыл бұрын
Nice. I like to repair 8 track cassettes.
@grimreboot2 жыл бұрын
Thanks for the upload! :)
@primtones2 жыл бұрын
I refuse to believe 1972 is more than 28 years ago.
@lesrogers73102 жыл бұрын
Same, i was 12 then now i'm prehistoric!
@allthegearnoidea67522 жыл бұрын
I agree
@UnderEu2 жыл бұрын
I’m 30 and I still recall the 1990s like it was a couple years back, in my mind - that tricks me out hard, every single time.
@vwestlife2 жыл бұрын
And I refuse to believe that Green Day and Third Eye Blind now count as "Classic Rock".
@SunnyAustria2 жыл бұрын
One Tip: Put the Splicing Tape always on the inner side of the tape so i doesnt touch the heads. Nice Video!
@chrisa2735-h3z2 жыл бұрын
by the way the splicing tape goes underneath the tape/ leader and not on top, it can get stuck that way 😝
@vwestlife2 жыл бұрын
Not with the smooth splicing tape I used. No problems with it.
@chukzombi2 жыл бұрын
back in the 80s you could buy ten cassettes for a dollar or 2. they were SUPER cheap, they didnt even have a cassette box, just loose. i only used them to record songs off the radio. anyway, the tape snapped all the time and being a broke kid, i used to use a scissor and a small piece of transparent tape to repair them. it worked great. i used to use a knife to open the cases, they didnt go back together good, so i just used the same scotch tape to make them stay together. i still have few of those tapes.