Repairing Spinning Snowflake Snowman

[@HallmarkGod]

I'm in the middle of repairing my snowman too. The hat arm motor is needing to be replaced, and the spinning arm is needing to get a new 9 tooth gear.

[@JamesGemmyHQ.]

This video taught me how to fix my spinning snowflake snowman four years ago and I just knew how to fix everything after I watch this video😂 i’ve not watched any tutorials, but I know how to fix Douglas’s furs Snowmiser Billy basses and a lot of other things

[@IDogFan41]

Does the hip swinging mechanism take an 8, 9, or 10 tooth gear? The hat arm mechanism?

[@gemmymasteranimatronics768]

Hat 8, spinning 9, hip 10

[@IDogFan41]

Gemmy Master Animatronics Thanks! Good to know.

[@picotus]

Thank you I used this video as a guide to fix my red vest hip swinging snowman

[@rudolphsandiego]

Could you advise what type of belt us used? Size material type and or a link where to get them

[@thatguyfromhastings]

My son loves your videos. I ordered a snowflake snowman just like the one your working on, however he decided to try moving his hat hand back and forth and must of broke the gears or something, so I am about to try your method. Thanks

[@jonarbuckle7103]

He works awesome i could barley tell the top snowflake wasnt working good job!

[@Gemmy-h3b]

This is actually a simple fix all you gotta do is search up 2 or 1 inch clear wire and then there you go then all you gotta do is feed it through and then solder on the wires and there you go

[@hallmarkcollector5892]

On my 2002.the snowflake wires get tangled up in the spinning arm preventing it to move, how do u fix that

[@brdrech]

My mr. Snow will move perfectly with his arms, but his hips only sometimes work if you work with them. Is that an alignment issue or a splitting gear because that was how it came years ago and how it still is now.

[@gemmymasteranimatronics768]

Split gear

[@brdrech]

@@gemmymasteranimatronics768 this is an example of what Im talking about. He starts to slow down or stop after a while and if I work with it it works. kzbin.info/www/bejne/oIOvhJmEfc91bMU

[@garza512]

I’m trying to fix mine as well but the wires I used are over heating the batteries. What wires do you recommend?

[@kellymccoy9309]

Imagine being this guy is a sibling walking in on Jordan while doing this and just seeing him what it looks like to be him torturing spinning snowflake snowmen

[@animatronicsgemmy589]

I’m trying to find a video that shows how I could repair my blue peppermint version, what tooth gear would I need to fix the hat arm?

[@gemmymasteranimatronics768]

It's the same as any of them, replace the 8 tooth motor shaft gear for the hat arm

[@animatronicsgemmy589]

Gemmy Master Animatronics thank you!

[@ryantartaglia7029]

mines eight tooth is destroyed as well

[@susiecuriel3384]

Hi. Omg I love this. Can you help??Hip swinging motor won't shut off on mine. Everything else functions well (hat & snowflake).

[@mneraasen224]

i have a frosty the snow man, he doest get power to the press button. i opened the bottom he stands on and it looks okay any ideas on what to do next?

[@RetroMarketingGroup]

Any chance you can link me the gear needed to fix the hand that moves the hat up and down? I want to be sure I get the right one. Thank you!

[@RetroMarketingGroup]

It would be nice to get a refreshed list for gears 8, 9, and 10. I want to make sure I have all the parts needed to repair these for my kiddos. :)

[@nolanswan5483]

I have a snowflake spinner 2 and all it does is light up and sink do you know if there's any way you could repair it with a harmonica center and a saxophone

[@terrymickla9277]

I have a snow miser that needs work...snowflakes do not light up and hat arm not working correctly. Do you offer repair work services?

[@timsheldon5267]

Would anyone know what the part# for the belts is? from ACE Hardware

[@RetroMarketingGroup]

I would like to know as well!

[@SumProject18]

God these really are a pain. I finally fixed my first one today. It was totally worth it!

[@FurbyRestorer]

The speed dial is snapped in half so I can't fix it :(

[@Heartxxxxx2]

Is there a way to make it run continuously?

[@briannataylor7295]

My granma has a red verson of the blue one your fixing im not sure if it still works its at popas house but i can walk there so if i could i will make a video about it

[@briannataylor7295]

I love your cat it is so cute!

[@t2maggart]

Do you have a eBay link for the square drive gear 32 teeth 12mm that lifts the arm with hat up and down

[@deppresionmeal942]

Hey nice video, i ended up getting one of these (grinch variant) , buts its in probably one of the worst conditions possible. Belt for the spinning arm is bad and the gears slip, so when it does spin, it struggles, head wont come off so the old owner had to cut open both arms (OUCH) hat arm struggles, so it can only go down (up if you put it on its back and the hat is high enough {cant fix it because the head is stuck}) Legs are broke so it falls forward and the base is cracked open. Think you could help me repair it (idk if you can send links to replacement parts, take it in to repair it yourself) or should i just deal with it and buy a new one? (EDIT it turns out the accident that broke the legs and base broke a piece near the top of the head connecting it to the gearbox, so i had to remove it, however the head still wont come off) (Edit 2 the head came off, however the capacitor for the hat motor came off, and the pulley came right off, and the motor for the spinning arm struggles to spin even without the belt, do you know where i can buy replacement gears and motors for this because the ebay links you posted for the gears are either broken or are sold out)

[@TheBigkaw815]

Does the ziptie thing work on frosty? His hat arm is broken.

[@hatylikesrocks]

hey gemmy master animatronics I need a ten tooth for my spinning snowflake frosty, where can I find it?

[@LunaReviews]

23:50 then how come the 2005 hip swinging snow miser have speed dials?

[@gemmymasteranimatronics768]

idk, they just do lol.

[@LunaReviews]

Gemmy Master Animatronics ok

[@Halloweenisawesomesauce]

Could you compare the broken ten tooth with another tooth?

[@iiscriptydev6261]

Gemmy how can I fix my frosty I hear the noise of the motor but it does not dance

[@ryantartaglia7029]

I feel your pain I have two 2002 1 songs in similar condition

[@animatronicsstuff6803]

I have a blue peppermint with both arm gears split :(

[@KroPoP]

@@animatronicsstuff6803 k

[@Spinninproductions]

I have a blue vest that does not even try to move. wires are disconnected, split gears, its a mess.

[@Caleb-b6v1d]

I got my frosty working but I need a good belt in spinning arm

[@NobodyNobody451]

I'm not a professional with gemmys, heck, I don't own any! but, I know that the gear in the right arm can break easily. why, you may ask? Because the arm motor spins fast and it can pretty much break after a while. Oh! and I'm wanting to order one of these Snowflake Spinning Snowmen, but they mostly say the hat hand sometimes needs help getting up. But these 2003 things just cost 100 or somewhere around 200 dollars. Jeez! (fun fact i have only 1 sidestepper. its a snoopy thanksgiving one. and it plays linus and lucy)

[@jamiemaslar658]

Can you please let me know who in China you ordered the 32 teeth square hole gear and the double gear next to it? I saw you repaired the square hole gear but the double gear next to it is missing some teeth. If you have dimension sizes would really appreciate it. I ordered a lot off Amazon and none fit. Too skinny and no square holes so seeking your resource in China. Thank you!

[@gemmymasteranimatronics768]

I just order them off ebay

[@gemmymasteranimatronics768]

I dont know about square shafts, but motor shaft gears are 2mm plastic theres 8 teeth 9 teeth and 10 teeth for motor shaft sizes

[@jamiemaslar658]

Yes, I have the 8 teeth, 9 teeth, and 10 teeth gears that normally split. These are the bigger gears that handle the arm movement. There is a square shaft gear with 32teeth and a double spur gear it connects to with 34teeth and ten teeth in the middle. Looks like they are both 3mm hole sizes. Anyone out there know where to order these? Can’t find them anywhere.

[@phillipyee239]

@@jamiemaslar658 did you ever find these? If so, where? Thx!

[@jamiemaslar658]

@@phillipyee239 No I had to find it in another Gemmy.

[@gemmycollector2215]

Jordan, do you use 10 tooth gears to fix the hat arm?

[@gemmymasteranimatronics768]

8 I think

[@gemmycollector2215]

@@gemmymasteranimatronics768 I tried that with my new snow miser but his hat arm rarely raises all the way, should I use a tighter belt or use a 10 tooth gear to fix the problem.

[@DATNIGGA42069]

@@gemmycollector2215 try 9 tooth

[@gemmycollector2215]

I finally got my fixed but now the carrot hits the hat, how do I fix that

[@gemmymasteranimatronics768]

The arm is bendable

[@Notspencergtfromtemu]

No move it

[@Notspencergtfromtemu]

@@gemmymasteranimatronics768 hi

[@kedamonowolf456]

What version is this?

[@ConsoleMemories]

2 song or mr snow

[@trucesplaceforclockcollectors]

It’s his blue vest snowmiser.

[@SPCAnimatronics]

Where can you find replacement belts? I now need one for my snowflake spinner and my 5' dancing skeleton.

[@gemmymasteranimatronics768]

Ace hardware

[@FurbyRestorer]

I'm fixing mine right now :)

[@GemmyFreak]

Hey could you send me the link for 8 tooth gears and squareshaft gears on ebay? Thanks!!!

[@gemmymasteranimatronics768]

We don't know where to get square shafts but yes in a bit, a lot of gemmy items use 9 tooths 10 tooth as well

[@GemmyFreak]

Gemmy Master Animatronics Yeah that is true. Is it possible that you could send me the links for the listings? Thanks!!

[@gemmymasteranimatronics768]

m.ebay.com/itm/20pc-Plastic-Cogs-Gear-Gearbox-Motor-Shaft-Wheels-2mm-Hole-dia-8-Teeth-82A/182985385804?hash=item2a9ac7674c:g:sVcAAOSwHQ9WUqtI 8 tooth

[@gemmymasteranimatronics768]

m.ebay.com/itm/30Pcs-0-5-Modulus-8-Teeth-Plastic-Gear-Cog-for-2mm-Toy-Car-Motor-Shaft-S7R9/263366143696?epid=881471350&hash=item3d51d86ed0:g:Qs4AAOSwxixaJgkZ

[@gemmymasteranimatronics768]

m.ebay.com/itm/20-Pcs-5-5mm-x-2mm-9-Teeth-Plastic-Gear-for-Car-Model-Motor-Gearbox-Shaft/310939387183?epid=1438362179&hash=item48656e852f:g:NqQAAOSwMQBaRPF5 9 tooths

[@theericfreeze1493]

I burned my arm with a sotering iron when repairing a animtronic.

[@richardtonkin7587]

Do a house tour I kinda wanna see what ur house looks like

[@iiscriptydev6261]

I have a frosty and it has the same problem everything works but the dancing

[@iiscriptydev6261]

I found out it was a bad gear it was split in half

[@francesmorales7835]

good do you have dancing santas

[@anamarzev.5782]

Hello friend, we cannot see the operating system of the dolls, could you show the robotic system better? Many children would be delighted and grateful for being able to fix their dolls that did not work for different reasons. I could also do it with my Santa who died recently, I would like to be able to resurrect him and change him into operation on a cell phone battery.

[@kedamonowolf456]

When you repair stuff, pierce, cut, and stuff like that AWAY from yourself, and not towards yourself.

[@gemmymasteranimatronics768]

I know that, I just dont pay attention lol

[@OFFICIALGIANTSCHANNEL]

My 2002 model doesn't move and there's 2 split gears but it does not shut off because there's my green snow misers mecisisum

[@Blethh_nda]

i like how he has the camera like that

[@thegemmycollector201andham2]

Surprisingly My gemmy snowflake snowman needed zero repairs all needed was A wire fix on the board

[@nghaunts635]

I remember seeing one at megen's house

[@kedamonowolf456]

This is the one song right?

[@brettcompton2778]

yeah

[@SteveHolt-jb3ln]

WHAT THE HECK YOU ARE BREAKING IT😮😮😮

[@ryantartaglia7029]

wheres the speed dial at?

[@FurbyRestorer]

Under the base

[@ericstoyworld2686]

This Is Still 1 Hour

[@kedamonowolf456]

The battery on his GoPro died, so he used his other camera and had more time.

[@wboutsianis]

Are you wearing video goggles or something? How are you using both your hands and still recording?

[@gemmymasteranimatronics768]

Gopro

[@animatronicsgemmy589]

Gemmy Master Animatronics nice I have one too I have hero 3+

[@picklebananassplit9323]

Do these more often

[@Stonie100171]

Awesome kid drawings! Fmhtdde trnhgjdxc hm mn ,yr fggg.

[@Stonie100171]

Chugs h

[@justinsuter309]

I have one just like that

[@shaneparsons7081]

yay you fix it

[@kedamonowolf456]

Im repairing my pumpkin time knockoff "Rocking Witch." a gear with two sets of teeth split. So... *f r i c k*

[@steven.metal56]

These things are so freaking are tough I'm finally trying to fix mine right now like literally right now and I just made this post like right now and I'm literally trying to put it back together oh my God it's so freaking tough

[@mattcopenhaver6334]

I have a snowflake spinning snowman

[@jamesharley1592]

Sup Noah

[@Kalebsanimatronic]

3:05 why do you h a snoopy

[@gemmymasteranimatronics768]

I've had those sense I was like 2 lol, I had 3

[@gemmymasteranimatronics768]

Oh wait I thought you were referring to the gemmy head bobbing one, that one my mom just got me for Christmas lol

[@Kalebsanimatronic]

@@gemmymasteranimatronics768 can you s my c out i get 2 of my yt t i am sad so pls

[@Cwinch]

Can I take the cover all the way off without cutting it, I just need to wash this dude

[@gemmymasteranimatronics768]

What cover are you referring to?

[@The_gemmy_guys]

19:51 , 23:36 , 24:53 , 47:24

[@snowbusiness4709]

Is it weird that I have 3 mr snowbuisnesse`s

[@IDogFan41]

I mean snow business If you still have them you can sell them to get some $$$ to buy rarer snowflake spinners

[@peppapigonkk]

Hi

[@pattaylor9813]

yes

[@jacobdear7221]

What's wrong with your Micheal mires

[@jukebox7719]

snow

[@brettrobetrs1053]

Brett Robert

[@jhop.official]

Bzzzzzzzzzzzzzzzzzzz