replace cord in a curtain track-Australia

[@christinescott4689]

I've just re-corded three wide tracks that were quite messed up (I bought an ex-rental from hell to live in) and this video helped me heaps! I'd forgotten how to do it. After a good clean (someone thought industrial grease might make them work argh!!!) and replacing the gliders they work perfectly. Very relieved to have them working and all of the centres match. Thank you!

[@themav3420]

Great to hear!

[@harrygregory4853]

This is easily the best and most informative video explaining how to feed the cord in curtain tracks so that the curtains open and close. I have spent countless hours trying to do feed the cords

[@themav3420]

Glad it was helpful!

[@australiaprisonisland9156]

You must be joking!

[@rickdee7179]

Thanks very much for taking the time to make this video. I would not have been able to re-cord our curtains without your clear and nicely paced explanation. Very grateful!

[@margaretfriswell9885]

Clearly showed me how to replace the curtain cord. Thanks for taking the time to make this how to.

[@themav3420]

You're welcome!

[@brendonfinn2032]

Brilliant video - followed it and re-corded the curtains successfully. Not a chance I would have been able to do it without your explanations. A small flat head screwdriver was another good tool to use with the tweezers. Cheers

[@themav3420]

Fantastic!

[@noybv.ijssel4809]

Flushing from the Netherlands (in the orginal Zealand ;-) Says thanks a lot! It helped my 86 year old father and me to repair instead of despair! And it caused a nice father-daughter moment!

[@themav3420]

That's what its all about. Thank You.

[@OwenKeogh-y6g]

Thanks John, after watching several videos yours's was the one that I used and finally got it right. The FIRST tie off is the most crucial one. Frustration was mounting before you came up with the solution.

[@themav3420]

no worries

[@ghadashaheen1899]

Thank you i was having a hard time trying to do it but after your video i got it finally .. lots of thanks

[@themav3420]

Great job!

[@idarryl123]

Great video. Just saved me a world of pain. Thank you!

[@themav3420]

Glad to help

[@kishorhoswal]

solved the curtain hooks apply and curtain cloth sliding problem, it works when when I hook the first pin to the start hole of the carrier and last pin to the last fixed hole near pulley, thanks again

[@themav3420]

Nice work!

[@averilrcoe9854]

Thank you! Had to watch it several times and then stop and start as I went but we got there in the end, 🎉❤😅

[@themav3420]

well done

[@tarinibags4975]

Hi John, where are you based..I need a full house of cord replaced. Your website link is broken!

[@gonget]

Great instructions, helped me out heaps 👌🏼thank you

[@themav3420]

You're welcome!

[@sharoneacott9528]

Thank you so much for this. You've saved my sanity.

[@themav3420]

Good to know.

[@kishorhoswal]

great video !!! easy explanation !!! Thank you for this video. after I started applying curtains to sliders the curtain plates didn't move perfectly, they stay at same place, but only the cord moves. if the video would have been extended until the application of curtain to sliders and moving accordingly that would be appreciated

[@johnwalker7422]

Thanks for a great demo!!

[@themav3420]

My pleasure!

[@lindenj6155]

Thanks so much. It took me an hour but I did it!

[@themav3420]

Great!

[@bartonseagrave9605]

Good video John but just where do I attach my curtains to.

[@themav3420]

The video is to "Replace"a cord. Everything you need should be in the old track.?????? Including gliders.

[@briannaquarrell7132]

Where do I purchase the cord? In Australia btw, have a spotlight store near me

[@themav3420]

Anybody who makes curtain, tracks usually a curtain maker. yes spotlight or lincraft, Ebay. Most common size is 2.0 do not use 1.4 or 1.6mm. Good luck.

[@najmafareed9417]

Really thankful for your wonderful explanation

[@themav3420]

It's my pleasure

[@luisuriashermosillo6804]

Clear demostration, but A simple diagram on a sheet of paper, at the bwginning, showing where is the hanging chord, how the chord us placed, and where to start, could make it more easy to undetstand. Also, placing the camera before you, can give us the view we will have whilw doing it, not the opposit one. Take it in consideration for other explanations. Thanks anyway.

[@iynkymahadevan]

Thank you for sharing your knowledge

[@themav3420]

glad to help

[@nathanjamesdixon]

Meke video, watched a few others and was still scratching my head, maybe we do things different down here (nz&auz). Cheers

[@themav3420]

Cool, thanks

[@rajahindustani7005]

Tnq brother your video helped me a lot 🙏🏼

[@themav3420]

Thanks for taking the time to say thanks. Glad it helped.

[@Isamolle]

Thanks!

[@themav3420]

Any time

[@catrionamacauslan542]

Thank you so much! Job done.

[@themav3420]

You're welcome!

[@paulannan]

Thanks heaps I owe you a beer

[@themav3420]

No worries. Glad it helped.

[@annamcwha4166]

Thank you SO much

[@themav3420]

No problem

[@mehere8038]

Dam, doesn't show properly how to detach from brackets, or at least not the ones I have. My cord's still threaded, just the outer layer of the string is gone, so I can just follow it to rethread, but first I need to figure out how to get it down

[@themav3420]

There are many different brackets. Bottom line is they are all simple mechanics. Take your time & think iot out.

[@mehere8038]

@@themav3420 I found another video that showed me how to do it, there's a screw on the outside of the brackets that needs unscrewing to release them. Not a case of "think it out" for me, I'm in a wheelchair & was sitting on milk crates to reach the curtain rod over my sink & could just reach it sitting on 4 milk crates high & leaning over, but certainly not get to a location where I could actually see the screw or what I was doing, I needed the information in advance as to what I had to feel for & manipulate to release them

[@Moshg73]

🙏🏻❤️🙏🏻👍🏻🇮🇱🇮🇱🇮🇱

[@simonecarrano2571]

Grazie dall'Italia!

[@themav3420]

no problem

[@ronhamilton801]

P lol

[@australiaprisonisland9156]

Awful explanation!!

[@themav3420]

suppose you want your money back