Replace Fan Clutch 99 F350 7.3 Powerstroke

Replacing the fan clutch on my 1999 F350 with the legendary 7.3 Power Stroke. Also a short discussion on checking the automatic transmission fluid level.
Clutch fan nut = 1.870" . A 1-7/8" (1.875") open end wrench should be fine.
Spacing across the water pump pully bolts = 2.143". Nearest size wrench would be 55mm (2.165).
A 2-5.32" (2.1625") or a 2-3/16" (2.1875") open end wrench should do, but the jaw has to be at least as deep as it is wide. The tool I made from 1/4" x 4" flat bar measures 2.143" wide and it's a snug fit.
For more information and assistance with your 7.3 Powerstroke, check out the Ford Truck Enthusiasts 7.3 forum. These guys will bend over backwards to give you all the advise and help you need!
www.ford-trucks.com/forums/fo...
Please Like, Comment and Subscribe!
My content is about my 1999 F350 with the legendary 7.3 Power Stroke, Hot Shot trucking and trucking tips in general.
Check out my website: 2020hotshottrucking.com/
My Equipment for non-CDL Hot Shot Trucking:
1999 F350 4WD Dually with the 7.3 Power Stroke 11,200 GVWR
CM ALRD Flatbed body with added underbody Bauer tool boxes
2020 Big Tex Gooseneck Trailer 14GN25+5MR (30' with Mega Ramps) Derated to 14,799 GVWR
GoPro Hero 7 Black
#powerstroke
#powerstrokediesel
#hotshottrucking
#trucking
#owneroperator

[@dixiemae5042]

Second first 👊🏻💪🏻

[@2020HotShotTruckingLLC]

A fellow hotshot KZbinr is about to replace his water pump on his 7.3. I remembered capturing this footage so I decided to do a quick compile and upload so he could see what's involved in removing the fan clutch. Look in the description for the wrench sizes you will need to loosen the fan clutch.