Thanks much. Didn't want to start ripping the thing apart before learning how it SHOULD come apart.
@digitalvideodvd2 жыл бұрын
Thanks Rick, very helpful, I appreciate your time n effort to show us this. Cheers for that.
@denispeirce10432 жыл бұрын
Thank you. I did not have to break plastic parts to disassemble.
@dalesrrarohicks45003 ай бұрын
Thanx for the video. I still have a problem and at my wits end. I’ve replaced the trim switch and both solenoids on the pump. Trailer switch works as does the switch at the transom. The trim switch on the throttle works down but not up. Where do I look next?
@HUMMVE100 Жыл бұрын
Exactly the video I needed. Thank you 👍🏻
@djvision739925 күн бұрын
thanks!
@happyhealthywealthywiseАй бұрын
Great job!
@one2omg15410 ай бұрын
Great explanation!
@POSTMILLDR2 жыл бұрын
Where can I lookup replacement trim switch for my Mercruiser Alpha One zen 2 Quicksilver remote control?
@jschwar5 Жыл бұрын
OK - first of all... thanks for the video. I learned SOME things that were really helpful. Now to the critique. I found it to be impossible to get that "throttle only" button out without breaking it. Impossible. On yours there was only one barbed end piece instead of the four it was made with. That's why you were able to get yours out. With the full set of four barbs, it will not come out. I broke the pushbutton end of it clean off. True that there are inexpensive replacements available, but still - isn't there a way to open this whole assembly up without breaking it????
@iceMP14 Жыл бұрын
I broke mine off too. Do you know where to get a replacement?
@jschwar5 Жыл бұрын
@@iceMP14 I do, but KZbin is apparently preventing me from sharing that knowledge with you. Hmm.
@alexnicholson8315 Жыл бұрын
@@jschwar5I too am interested in getting this replacement piece! Please share where to search
@jschwar5 Жыл бұрын
822212T BUTTON-THRTL@5 (Mercury Marine)
@tobygeorge36532 жыл бұрын
awesome work Rick
@christinemascialino1287 Жыл бұрын
You don't have to cut the wires. There is a plug for the switch assembly harness.
@bmanchester96032 ай бұрын
Throttle advancement button broke. you said they were $3 or $4 all day. Any suggestions on where to find one?
@rockskitchen5022 жыл бұрын
so you have a video on how you put it back together. Mine fell off while I was coming back in to dock. scared the crap out of me. So now its dangling. Looks like my teeth are stripped. Trying to get a replacement but wanted to see a video of someone putting it back together again.
@mobettastufffosur2 жыл бұрын
Not sure I can help you without seeing your setup. Watch it a couple times and it will make sense, not a lot of moving parts. Look for a video on cable replacement and it my show a little more detail. I’m just a DIY guy and not a mechanic, o wish you well on your repair. Remember a day on the water is a day better than anything else
@dmanmoto11 ай бұрын
Can you tell me where the purple wire connects to in that arm.
@arturog172 жыл бұрын
Best video for this job! Thanks!!
@hanscloss40632 жыл бұрын
great video
@toddcornelius58177 ай бұрын
Thank you
@lawrenceleyva36332 жыл бұрын
Wish i had watched thisbefore i started. Would have sa ed me ti.e and treasure...
@dawsonrossman1552 жыл бұрын
Hey rick I have the same old 3000 unit that you had and want to update it to a newer smoother one whats the one you used after the fact and how do you like it? was it a pain doing the wiring change?
@runbmc359 ай бұрын
Is "advanced throttle control" the same as "throttle only" mode?
@randypedret89242 жыл бұрын
Bro can you tell me wish of those wires is the one that goes to the trim gauge?
@mobettastufffosur2 жыл бұрын
The blue one, I recommend doing a Google search for Mercruiser trim switch wiring diagram to familiarize yourself with the whole system. Good luck with your repairs
@randypedret89242 жыл бұрын
@@mobettastufffosur I have been looking on google but there’s nothing about it it’s really hard to find it thanks anyway
@andriusaguinaldo2562 жыл бұрын
Hi, quick question, what's the difference between inboard vs outboard shifter, can I buy an outboard shifter for an inboard engine? Thanks for your help!
@mobettastufffosur2 жыл бұрын
I’m just a DIY guy and not a mechanic. But I do know that not all shift cables are the same, they are specific to the manufacturer of your motor. You will need to match that manufacturer. A quick google search should get you on the right track. Good luck with your project
@jamesal0 Жыл бұрын
thankyou
@jukeyCsgo2 жыл бұрын
My quick silver has only 3 wires?
@mobettastufffosur2 жыл бұрын
Sorry, but I’m not a boat repairman. I’m just a DIY weekend warrior. When I can’t find a video on YT for something I make my own. I really appreciate when someone else does. What you see is what I know. The replacement switch wires are properly color coated. Just connect the ones you do have and leave the last one free. I just pet a little electrical tape on the end so no possibility of it shorting something. Good luck on your project