Replacing ABS speed sensor in Chevrolet Equinox

Hi, My ABS and traction lights where on on 2005 Chevy Equinox.
So after plugging scanner to obd port I found out that it is code
C0035 which is front left speed sensor fault.
Bought Speed sensor on Ebay replaced it , did not help.
Buy this could be a guide in replacing Abs sensors in Chevrolet equinox Suzuki xl7 pontiac torrent and saturn vue.
Guys use common sense and dont hurt yourself while working on vehicle.
Hey guys! If you find this information helpful and would like to thank creator for his time and effort. You may donate any amount you would think is appropriate to [e-mail] via Paypal.
Money will be used to buy new equipment to improve quality of the videos. Thank you for being awesome!

[@cabindude7656]

I had to pay a mechanic over $1300 to diagnose and fix this problem, so yeah, it can be worth it to try throwing a few inexpensive parts at it. Thanks for showing how to do that, it doesn't look that hard even for me.

[@bigelile07]

You need to find a new mechanic. I had the service Stablitrack, service Traction Control and ABS lights on my 08 Equinox. After reading a lot of what "it might be" posts on Google I took it to mechanic that I use to diagnose the problem. It was the right rear wheel sensor. They charged me $220. You can buy the part for $15.00 - $65.00 depending on the quality. I'm pretty sure it's just a matter of time before the other 3 fail and I will be replacing them myself now that I know for a fact what the problem was. Oh, and it only has 80,000 miles on it as of November 2020. Biggest POS vehicle that I've ever bought.

[@m80thewolf86]

"Okay, so... This didn't help..." Lol I can relate to that phrase all too well

[@rwf71]

I just solved this same issue on my 2005 Equinox today. I bet your wheel hub has been replaced because there is SUPPOSED to be a bracket sandwiched between the hub and spindle housing to hold the clip on the connector for the WSS wiring harness. the bracket which is Missing on your car makes getting to the sensor the way you did impossible, you HAVE to remove the caliper and rotor to get to the sensor. You need to do that anyway because your problem could be the same as mine which was rust on the hubs sensor mounting surface. This rust raises the plastic sensor enough to increase the air gap between the WSS tip and the ring in the hub. I pulled the WSS , plugged the hole to prevent debris entering the hole, then filed/sanded the mounting surface until clean and shiny then reinstalled the WSS. Problem solved , no parts needed , just labor to pull sensor and clean mounting surface and reinstall

[@mattandtarayon217]

Rick Thepoorboy did your speedometer work? im having similar issues

[@rwf71]

My speedo was not affected by this WSS problem, it was the traction control and ABS that had a problem because of the WSS

[@morghynyouell567]

I also have an '05 Equinox and I'm having ABS issues, but the problem is that my ABS light isn't on, so the scanner doesn't pick anything up. I had new rotors and calipers put on recently (both front tires). Any recommendations? My mechanic quoted a $500+ fix and I'd rather avoid that.

[@owenmaisonet4134]

Morghyn Youell install a new master cilinder because im haved the same problem of you and i but a new one and problem solve !! ;)

[@mcgoomcgee345]

Rick Thepoorboy what was your car doing? I'm having abs brake issue when stopping the car I hear the abs everytime

[@cathykerby5802]

You have to reset the code after replacing the sensor.

[@Anonymous-it5jw]

Clear the codes before taking it for a test drive. Follow the advice of Rick Thepoorboy posted here and clean the connection area of rust and dirt. and as you tighten up the connection bolt, gently turn the rotor with your hand to be sure that it is turning smoothly and that the new sensor is not hitting the notches in the internal sensor ring. Something appears to have chewed up the end of the old speed sensor and you want find out what caused it and fix that issue, before spending more time and money on this problem.

[@greenspiraldragon]

The exciter ring rust out on these vehicles it's included as part of the hub. Replacing the hub should fix it. Then you will probably have to drive it for a couple of days to clear the code.

[@joecnc3341]

Great video - Which AutoLink Scan Tool are you using?

[@vinnyh7657]

Did you clear the code before the test drive?

[@MattSikon]

So was the Ebay sensor bad or was it something else like dirt or rust?

[@فراتالشايع]

I own a Quinx car 2008 and I need this sensor and it is not available in my country, Iraq, how can I get it

[@91customs19]

dont feel bad that it didnt work amigo i have a 2007 and i swear its the worst suv built its so sensitive and full of electrical problems i cant count

[@cathykerby5802]

First you unplug the battery then you replace sensor then you rest the code. #iAmwoman

[@naamah8339]

well i have chevi equinox 2005, I'm looking for some diagnostic tool or software that will show me my ABS and AIRBAG error code's in Poland no one find's anything but an engine

[@rahmanmuhammad1557]

Needs to be updated to 2011 at least for such repairs on such make and models

[@rahmanmuhammad1557]

Just had that problem corrected yesterday to the tune of $1165, due to said need of ABS sensor, 4 exact tire sizes, and hub bearing assembly. Woowitme .

[@ImAChristianFirst]

I am having the same issue and will just change out the old bearing and hub assembly which comes with the connection already. Both sides combined are only $80.

[@carlosdavis6943]

Where do you get your parts from? I just bought one hub assembly that didn't come with the sensor and paid $100 and it was originally 250$, but my buddy is a mechanic so I got his discount

[@ImAChristianFirst]

@@carlosdavis6943 rockauto or ebay. Do a cross match for the part number. These parts mostly come from out of the country like China. One search on alibaba.com reveals this real fast. If someone acts like their part is worth twice the rockauto or ebay part I would like an explanation including actual testing instead of opinion.

[@ImAChristianFirst]

Also, profit margins are huge on these parts. If your paying $100 you can bet it was $20 to make. You can purchase OEM hub assemblies from china for $15-$20 in bulk and resale. That is how you see companies like rockauto and ebay sellers being successful. So when you see a low priced auto part do not believe it is less quality simply because it is less expensive. Companies like NAPA like to mark their parts up and sell you on a lie it will last forever. Remember they have a lot of overhead to pay for in those parts. That is why your paying $150 for a wheel hub at NAPA.

[@enriquelopez7366]

Thank you

[@sevenscents1109]

You must reset the computer by disconnecting battery for 20 mins, Then the lights won't come on.

[@crazee6821]

He didn’t clear code after installing sensor

[@tmph1814]

You need new rotors

[@jeffbrooks2080]

faulty sensor from ebay. I wouldn't buy a sensor or anything electronical from ebay for a car, truck or suv. bought my sensor from automotive store and works like a champ. No light.

[@repaired2106]

Could be, but 90% of the time I dont have problem with ebay parts

[@Sportek24]

American cars are horrobles

[@samknudsen9179]

Why do Americans put on or remove the tyre from the car, so what you are saying that you will remove the tyre only and leave the rim on the car, I always remove the wheel nuts first then take the rim and tyre off together.

[@carlosdavis6943]

I've literally never seen someone take the tire off the rim to just take the rim off. You've got to be kidding. That's the dumbest shit I ever heard

[@carlosdavis6943]

And nowhere in the video did he take the tire off the rim

[@km-eo8vc]

@@carlosdavis6943 no he just took the whole thing off. I've never removed the just the rim.

[@james-im1sj]

Got to be trolling

[@samknudsen9179]

@Buzz Pelermon In America you spell the rubber that is on the rim this way ( Tire ) here in Australia we spell it this way ( Tyre) yes we do spell it two different ways, but it still means the same thing.