Replacing o-ring in quick disconnect fitting for pressure wash hose

Replacing o-ring in quick disconnect fitting for pressure wash hose.
Orings
amzn.to/2xoxktV
Pick Set
amzn.to/2wTfrSt
affiliate links
www.firstchoicepowerwashing.com

[@stevenl5652]

LOVE YT and guys like you that post common everyday fixes. New to pressure washing and had a brand new fitting go bad on a job. Appears the entire o ring blew out now that I took a look. Nice to know I don't have to replace entire fitting. Thx bro!

[@butchphaneuf9675]

Exactly my experience! Didn't even know there was a O-ring in that end as it got blown out. The manufacturer was no help but your advice was perfect. Thanks!

[@Extra.Medium]

One of the best tutorials I've seen on here. You got straight to the point and helped me fix a leak in the in transit heating system in my semi truck. Thank you

[@kingofpressurewash]

Thank you for your kind words! I'm glad I could help you fix the leak in your semi truck's heating system. It's comments like yours that make creating these tutorials so rewarding.

[@shawnzirkle2333]

Like those straight to the point vids. No 10min intro and talking about everything that happened that day for 10 or 20mins.... and now after 30mins lets show ya'll how to do what you're wanting to do in a 5 sec fast foward clip. Lol😂. Watched alot of this guy's videos. Hes to the point and knows whats going on.

[@shaferspressurewashing8911]

Last night you answered a question of mine about x-jetting a metal roof. I actually got away with using my normal house wash mix today. Thanks for all of your support and answering all of my questions. Thanks!

[@ahmedsadeeq74]

So I've only used this pressure washer one time. kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP The one time I used it, it worked great. I recently had new siding installed but kept the old gutters and small areas surrounding my house that weren't replaced so they looked horrible and dirty because of the new siding. I needed to get it cleaned asap. When I used the pressure washer, man it just melted all the dirt and grime that was on those areas of my house. I used that krud kutter soap and it was over after that. Easy to assemble, feels durable, very simple to use. Also, I purchased a used one to save money and there was absolutely nothing wrong with it. I want to get more use out of it so I think I'll be washing the cars and update this comment as time goes on.

[@mariner8082]

Thank you for posting this video. I started my pressure washer for the first time this year and got a shower due to a leaking quick disconnect. I remember that I purchased an oring kit a few years ago and took a chance. Back in business thanks to you!

[@kingofpressurewash]

Thanks for watching

[@JHarp_]

Bruh I just started pressure washing as a side hustle and let me tell ya I watched this video and was able to confirm I blew out a o ring and I was able to change is out quickly and completed the job. For a older video I truly appreciate the help!

[@kingofpressurewash]

Hey, that's great news! Happy to hear the video helped you out. Keep up the good work with your pressure washing!

[@TREBLEBOOSTER65]

In my first year washing. Water was spewing everywhere at this lady's house yesterday I felt so dumb! This must be the fix. Thanks King!

[@kingofpressurewash]

Thanks for watching

[@s.b.2648]

Good job. No great job of showing that to us over KZbin. 👏👏👏👏

[@rigexpertusa6033]

Thank you! I was looking for a place to buy these O-Rings and your video saved me $30! Keep up the good work and helpful videos!

[@johnharrington7953]

Thank you it was a big help watching this! Took care of this problem on the job!

[@onecrazywheel]

Thank God for this video. I just had my o ring shoot out. Now that's why my tips are leaking so bad. Thank you Thank you! Jeffy

[@yochadder]

Thank you for the the short and to the point video. You definitely saved me time and money. Keep up the good work.

[@kingofpressurewash]

Glad I could help make your day easier

[@jeremycorey-gruenes6614]

Perfect! This saved me so much time. I was able to find the 3/8 inch O-ring at Advanced Auto Parts too. Unfortunately, I had to buy an entire variety pack for 7 bucks, but the connection is fixed, and my power washer is working again--still a cheap fix. Thanks again.

[@AW-Services]

I always seat in new O rings with silicone grease or petroleum jelly. It prevents them from wear and aids better sealing and attaching to your pressure washer etc

[@billygoat8204]

Wand was leaking at the end where the nozzles quick-connect. Almost no pressure. Easy fix, was missing an O-Ring 3/8" ID & 9/16" OD, Harbor Freight to the rescue. Honda pressure washer, leaking with no pressure.

[@diverdave4056]

thank you ... i'm heading to Ace Hardware to buy them !

[@jmonte2811]

Thanks for sharing. Your video saved me from buying a new fitting since I could not ell the problem was this missing o ring. I just bough a package of the o rings for future use. Thanks again!!!

[@kingofpressurewash]

Awesome I’m glad I could help you out

[@matthewstephenbrown]

Michael, thanks for the post! Very helpful.

[@buglwc]

just match the rings with o-ring kits at home depot plumbing section and thanks that solved it. It appears when one oring goes on one end of the wand the other follows very quickly!

[@kellyagri3224]

Thank you so much you saved me a load of trouble with my brothers

[@airjordz43]

probably the most helpful to the point video I've watched good man.

[@kingofpressurewash]

Glad it helped

[@edmora7662]

Thank you for that tip. I was getting wet power washing at work.

[@kingofpressurewash]

Did it work?

[@edmora7662]

@@kingofpressurewash Yes. It worked. Thanks again.

[@tomsellers1263]

Thanks! Saved me time and money!!!

[@YoungVeteran2023]

thank you. I bought the gasket and my wand was back in working order. this happened in the middle of a job.

[@Hewagej]

Very nice video

[@kingofpressurewash]

I'm glad you think so! I'll take that as a sign that I'm doing something right.

[@georgelowe8583]

Hi Michael, thanks for the video and the example on replacing the o-ring. You just saved me a big heart ache. Although it would have helped if you mentioned the size.

[@robertdiamondoil2384]

My air coupler is leaking might same problem I'll have to check, didn't know you could replace thank you

[@jeremykirk9641]

Air doesn't use o-rings

[@lancetenhoopen1006]

Thanks for sharing

[@carlosbond634]

What is the standard size o ring for the gun tip??

[@highsoldier2108]

I just need the size of the O ring and is it metric or standard?

[@krayzie7022]

Just like that? I thought you had to disassemble the whole connector. Thanks for the video.

[@kingofpressurewash]

Glad it helped

[@wiredawg2005]

Thx, just what I needed...

[@kingofpressurewash]

Awesome I’m glad I could help you out

[@guidojones100]

Thank you!

[@Couchlover47]

Well done.

[@jodystrickland9338]

What’s the id od and wall

[@airgunnerca3304]

Thanks bro ... Thats helpful ...

[@kingofpressurewash]

Thanks for watching

[@dellparker7686]

Getting the right size has turned into a scavenger hunt! No one local has one for the Easy Kleen hot wash pressure washer I have. Or the disconnect went bad after only a few uses. Also I’ve learned I need an oring that is rated for 4500 psi and high temperature rated. The search is still on!!! Hopefully the package I orders from Amazon will be the right size. I’ve found several 3/8 orings but none the exact thickness I need. Any advice?

[@kingofpressurewash]

Yeah that can be tough.

[@Chipum]

thank you

[@faraisalexander5120]

kalau cara ganti pisto nya bagaimana ? 🙏

[@honest8bob]

Thanks for the video!

[@joesphbaumgardner4579]

What I was looking for, thanks. Brought a Craftsman and fired it up. Darn thing sprayed water all on me out sides of disconnect. Was wondering what issue was and came here. With that was wondering if anyone could input on something. Because I have no clue where to even get a search hit on issue. So it's a Craftsman. I notice when I fire it up water gushes out in a steady hard stream. Location is bottom. Not the hose line or all else. On the side sits what looks to be a small end that screws into the belly of whatever. The pump and or water area. This looks to be about round as a pen you write with. Has two or so ridges that appears something goes over it and locks. Kinda looks like the end of a compressor air nozzle. It is brass looking. I can't understand what that is and why water shoots out a high pressure. To me, I can't see the pressure washer being made this way. It eady runs water out while on, is a mess, wastes water and reduces my pressure flow alot. Any take on what may be and what is suppose to be?

[@joesphbaumgardner4579]

Side note, the issue above location is off to side. Where you screw pressure washer hose up. Should be a little spot where something screws in the gray area.

[@jorginy13]

Thank you sir

[@kingofpressurewash]

Thanks for watching

[@angelaprater2679]

John here that's what wrong with mine what size is it

[@kingofpressurewash]

Heres for the 3/8 couplers amzn.to/2JPUzR9 here the 1/4 couplers amzn.to/2Y1eHEU

[@erwin69l]

What size is the o ring

[@Gypobt]

why this happen?

[@punjankusare1862]

8 year ago 🤯

[@sofiandpheobe8589]

What is the size of the O-ring dude

[@kingofpressurewash]

3/8

[@nicholashalvis5376]

What size o ring?

[@kingofpressurewash]

I believe the three eights

[@kcelectronicstech]

I found the ring at Advance Auto Parts for $1.18 if anyone needs one.

[@franklinmack5805]

Scribble DIsorder

[@CESARP35]

Hi there, do you by any chance now the part# for Advance Auto is it just a brown 3/8" o ring? Thanks

[@Lu-cho]

Ooohh Thanks. Home depot KIT is only 1 or 2 of those, others never use them, just waste money , not worthy. Sherwin Williams pay for 3 pieces $5.15 cents .. to much for that. I will stop for more there at Advance just to keep when really need it.

[@5mgshorts527]

All type pressure washer oring available All india courier available

[@genedhallinc]

Better keep a bag of both sizes with you. Sucks to have an O-Ring shut you down in the middle of a job.

[@Hewagej]

Very nice video

[@kingofpressurewash]

Thanks

[@Hewagej]

Very nice video

[@kingofpressurewash]

Thanks