Рет қаралды 152
To replace the cabin filter in your Peugeot 206, follow these steps:
Locate the cabin filter: Typically, the cabin filter is located at the front of the vehicle's interior, usually behind the glove compartment. To access the filter, you may need to remove some interior trim, such as the side panel next to the passenger door or the plastic cover under the instrument panel.
Open the glove box: Open the glove box, then unhook the tabs or screws that hold it in place.
Locate the cabin filter cover: Behind the glove box you will find the cabin filter cover. This is usually a plastic cover that snaps on or is attached with screws.
Remove the cabin filter cover screws or clips: Remove the screws or clips that hold the cabin filter cover in place.
Remove the old cabin filter: After opening the cover, remove the old cabin filter from its slot. Make sure you note the orientation of the old filter so you can install the new one in the same orientation.
Install a new cabin filter: Insert the new cabin filter into the slot, making sure it fits correctly in its orientation. Make sure the filter is properly aligned in the slot.
Reinstall the cabin filter cover: After installing the new filter, reattach the cabin filter cover by tightening the screws or latches.
Close the glove box: Close the glove box by returning it to its original position and latching or screwing it in place.
After following these steps, the cabin filter in your Peugeot 206 has been successfully replaced. Remember to use the right cabin filter for your Peugeot 206 model and replace the filter regularly in accordance with the manufacturer's recommendations to ensure clean and healthy air inside the car.
Replacing the peugeot 206 cabin filter - Peugeot 206 cabin filter - peugeot 206 pollen filter
Visit the channel; for more;
/ @naprawynawariackichpa...
Second channel;
/ telefonyklasyczne
Third channel;
/ spankoasmr
#poradnikizróbtosam