Exactly the reason to not buy a BG-10 pull station 😂 My Instagram: / safetysecur. . If y'all are interested in hiphop music, check out my SoundCloud page! / user-50891191
Пікірлер: 69
@alexandersalarms53803 жыл бұрын
I got a BG-10, painfully accurate.
@hunterduncan3623 жыл бұрын
this why i prefer keys over screws.
@ConrailGeep3 жыл бұрын
yep
@pvh_facp4001yt3 жыл бұрын
As a person who has pulled and reset a BG-10 i can confirm it’s a nightmare
@FireTech73 жыл бұрын
*shortly later he became a service tech and got to rip them out with hammers and lived happily ever after*
@Slektus3 жыл бұрын
True
@Exit911YT3 жыл бұрын
So basically, the BG-10L is better than the BG-10.
@SafetySecurityAlert3 жыл бұрын
At least I think so
@Sinxytlol32 жыл бұрын
@@SafetySecurityAlert where can I find the bg 10 l with key
@jzzhang7262 жыл бұрын
Yes bg 10 sucks
@calebculwell7340 Жыл бұрын
Yes
@legoguy-sb6mu3 жыл бұрын
Yooooooo I actually laughed so hard😂😂😂😂
@SafetySecurityAlert3 жыл бұрын
🤟😁
@bottlerat23182 жыл бұрын
not funny
@CoolSimasGuy3 жыл бұрын
If I ever become a technician and I’m inspecting a building with BG-10s, I’ll make sure I have a box full of brand new BG-12s right next to me just in case👌
@AJ-Palermo3 жыл бұрын
I have a BG10 Halon pull, and it takes SO LONG TO RESET
@officialsimplexguy3 жыл бұрын
I saw one of safetechs inspections full of bg 10s. They took an eternity to reset and on top of that they are so cheap that if you tighten it too much the pull is toast.
@SafetySecurityAlert3 жыл бұрын
100 percent accurate
@LoyalmoonieProductions7 ай бұрын
And you could get a false alarm with that!
@SomeDudeWithAnExitSign3 жыл бұрын
Honestly that the BG10 (Hex reset) is one of the worst pull stations of all time. This is behind the The Ademco 529 pull station and Edwards 78 which are disposable pull stations.
@SafetySecurityAlert3 жыл бұрын
Yup lol
@safealert21yt523 жыл бұрын
ok but why is this so true, this is why i hate buying non key to reset pulls!
@CivilDefenseSoutherner3 жыл бұрын
My cousin’s autism clinic used to have BG-10 pulls. But they got replaced with the BG-12 pulls! I feel like fire pulls are always replaced with FireLite BG-12s!
@FourtyFiftyEighty3 жыл бұрын
Hehehe I have a bg-10 on my system rn. The screw is just loose so i can pull it open just enough for the handle to go back up
@adamkaps1688 ай бұрын
I got a BG-10 that’s coming, it thankfully and fortunately has a key lock and not a hex lock.
@vintagesimplexfirealarmsof64403 жыл бұрын
Thats why you should use a drill to open or close it and also why I have a 4251 20
@BlueThunderboltsiren10 ай бұрын
I just added a BG10 to my collection that has a screw and a washer in the front.
@ThatoneTiv2Kid7 ай бұрын
Man actually spent 1 minute and 31 sec to reset bg10 lol
@jzzhang7262 жыл бұрын
after he saw BG-10 he used a bulldozer to smash it
@SafetySecurityAlert2 жыл бұрын
HAHAHA!
@a.r.aproductions15693 жыл бұрын
Everything about this is factually accurate
@SafetySecurityAlert3 жыл бұрын
HAHA yep
@Cal-Fire3 жыл бұрын
BG-10s are torturous, but have you tried to open a 270-SPO without a proper screwdriver? what about trying to close one with a broken spring?
@SafetySecurityAlert3 жыл бұрын
OHHH yes believe me. I have a 270-SPO where the screw spring thing is stripped it sucks.
@SomeDudeWithAnExitSign3 жыл бұрын
At least the 270SPOs are made in metal unlike the BG10s.
@SafetySecurityAlert3 жыл бұрын
@@SomeDudeWithAnExitSign True
@user-Calebculwell Жыл бұрын
As someone with both a hex and key lock version of the bg-10 . I completely identify with this
@vintagefirealarmguy52853 жыл бұрын
And this my friends is why bg10s don't exist anymore.
@SafetySecurityAlert3 жыл бұрын
The main reason was because of the faulty button but your right.
@davidredpath47813 жыл бұрын
I’ve ripped out so many of them in the field. Nice pull station for collectors, but they are junk.
@SafetySecurityAlert3 жыл бұрын
I think they look pretty good but they are faulty and don't function very well.
@SomeDudeWithAnExitSign3 жыл бұрын
If you think the BG10s are bad. Take a look at The Ademco 529 or the Edwards 78. Those are horrible pull stations.
@calebculwell7340 Жыл бұрын
The only bg-10 I think is crap is the ones with the screw on the front, the ones with the key locks on the side are the best ones
@emmareporter43243 жыл бұрын
me: *starts swearing up a storm*
@JBF-GST-Tanda7 ай бұрын
After turning the screw for 28 hours, Luca left the pull station and...It falls open and the alarms goes BEEP BEEP BEEP again
@SouthwestFireAlarms3 жыл бұрын
It's true lol
@KanoaDeCastro3 жыл бұрын
So true.
@BlueThunderboltsiren4 күн бұрын
Fun n games until you accidently make the screw too tight and the plastic breaks.
@TStudioX3 жыл бұрын
The BG-10L is better because it's the quickest way to reset with the key.
@SafetySecurityAlert3 жыл бұрын
Agreed
@erikthepirate80683 жыл бұрын
Looks like you're getting allowance for fixing fire alarms.
@Collin_Unknown2 жыл бұрын
It's weird that he hast to take a long time turning the hex
@RaccoonAlarmsVosgra3 жыл бұрын
This is true...
@calebculwell7340 Жыл бұрын
Very true
@filmer7653 жыл бұрын
One day, I will run myself into a BG-10, and should one break I will replace it with an EST 278B-1120.
@ConrailGeep3 жыл бұрын
true
@thecaryrailfan37043 жыл бұрын
I can so relate.
@tpmplumbing67482 жыл бұрын
True. XD
@Ambroseweatherradioandmore2 жыл бұрын
😂/😭
@Alarmo052213 жыл бұрын
The screw model is a peice of crap. Always get the keys.
@SafetySecurityAlert3 жыл бұрын
Agreed.
@Samthe173 жыл бұрын
1:53 **Sheesh**
@carterkoning12143 жыл бұрын
This is why people should not get the bg 10 with the hex key
@SafetySecurityAlert3 жыл бұрын
Exactly haha
@SimplexTBarGuy2 ай бұрын
I have a BG-10 too with the hex lock. I have no problem resetting it and I also had to tighten carefully
@joeycaridi30303 жыл бұрын
BG-10L: 👍 BG-10: 👎
@aaronsceilingfansspeakersa3057 Жыл бұрын
How to make the BG10 faster to reset: USE A DRILL!!!!!