Resilient Sounds GOLD V2 subwoofer review Taramps smart 5 BASS SPL test

[@ResilientSounds276]

I now have a Resilient sound platinum D1 15 and it hits insane coming from a VXF15 D2 is a huge difference ur right with the SQ is great AWSOME video brother. Definitely my new favorite subwoofer as well RS for the win

[@Kyle-j7k2u]

I have 3 vxf 15s well I've blew one and possibly damaged one. Is this a better subwoofer? I'm looking to buy a new set of 3

[@Gunnaguna]

@@Kyle-j7k2u yes

[@bobcat3653]

​@@Kyle-j7k2uYes this is a higher quality subwoofer all the way around 💪😎👌

[@HiFiVector]

Yea I love my VXF but these RS gold V2 are on a different level. They are my #1 fav sub right now overall.

[@elulysero8863]

Wich one hit the lows with more authority? Vxf or the platinum?

[@mattsinn9518]

We have 2 RS Gold v1 12's and are very happy with them. They hammer on a Taramps Smart3 in our Nissan Armada. Worth every penny. I can't imagine how these are. Bigger and better.

[@Jpilgrim30]

I know what you mean by smooth sounding woofers. I just got an SSA Evil 15” and that things sounds amazing while also getting loud! I love me a 15” subwoofer with a low FS in a big ported box with low tuning. Once you have something that digs real low like that you can never have it any other way. I haven’t had a sub that sounds as good as this one since I got rid of my Incriminator Audio Lethal Injection.

[@jayrands5380]

How low do u usually tune Your boxes?

[@KelseaPyne]

@@jayrands53809hz

[@catch22frubert]

These subs seemed like they needed a Smart 8k to really start getting down. The 5k didn't really seem to push them very hard. I know they were brand new and stiff, but it just seemed like they wanted more power to really get movin to xmax. It's a little misleading rating these at 1500 RMS and actually needing more like 6k RMS to really get to thier sweet spot. It sure seems like the coils and everything else can handle 3k each. I wonder if having them wired down to half ohm would had made a difference? I doubt it though. Still, you might had broken into the 149's with it wired at .5 ohm. I still think these subs need a Smart 8k on them to really get the most out of the setup.

[@amordeweso]

I was thinking the exact same thing they were barely moving

[@MegaJohn334]

Do u think the 12s could take the 8k? Everything is the same right? Same motor same everything right ?

[@Tjcin513]

My 2 v2 12s is taking a big boss 8 like it’s nothing . This sub is way better than my platinums they most definitely rated them at 1500 rms cause they didn’t want there “ lower “ tier sub too have the same rms rating as there plat but the plat should really be like 25-3k rms

[@kathygarber3230]

I've got two resilient sounds team 18's on a crescendo bc17k in a 6th order with a total of around 25 cubes. I've been slapping on these pretty hard for almost 3 yrs. Resilient sounds makes a great subwoofer. I'm about to test out their 6.5 pro audio speakers soon.

[@fishrrelaxing9361]

Even the team guys don’t run the team subs 😂😂

[@xcuxez]

Do you think the plat 18s would handle a taramps 15k

[@kathygarber3230]

@@xcuxez that would probably be pushing them pretty hard, but if you know what you are doing and don't over do it...yes

[@kathygarber3230]

@@fishrrelaxing9361 well I do with 0 issues

[@kathygarber3230]

@@fishrrelaxing9361 i do and I'm very happy with my set up.

[@Gqsfinest]

I love your videos because you have a variety of different subs on your channel. I wish you would have put the V2 subs in the same box as the V1 subs so we had a better comparison.

[@HiFiVector]

The v2 take an abnormally large cutout. So I did not want to ruin the other box. If I cut it I could fit nothing else in it. So that’s why I made a custom box for them only. Otherwise I would have used same box. Thanks so much for watching inappropriate it. But I did make box specs same in the v2 boxes they are just layer out differently.

[@theinsaneunknown]

Those 2 are laughing at that 5k, that's awesome. Thanks for another great video man.

[@catch22frubert]

I was thinking the same thing. I think the 1500 RMS is a little misleading when the subs want more like 4k-5k each. You might be able to put a smart 5k on each sub and be fine lol.

[@chefbgordon8892]

@@catch22frubertI’m gonna be putting my single gold 15 v1 on a cab45 currently on a jp23 and even the v1s want more than 2k

[@HeriTorres-i8l]

@@chefbgordon8892I’m putting a deaf bonce aak 4000.1 at .5 ohms to the gold v1

[@markroberts715]

So nice. Thanks for the vid,I definitely plan on upgrading from harmony audio carbon to these v2s man,so nice!!

[@FrankStPeter]

Epoxy comes in many colors 500 degree epoxies 500 degree epoxy no matter what color it is

[@HiFiVector]

Thanks for the info!

[@FrankStPeter]

Sorry my man wasn't trying to be a dick, I just got into a lot of heated discussions with amateurs the color has nothing to do with the quality of the product case and point Rockville Punisher V2

[@HiFiVector]

No offense taken! Was just noting all the differences I could find from the version 1.

[@jayrands5380]

​@@FrankStPeterwhat about Rockville punisher V2? Is it garbage?

[@a-team65]

@@jayrands5380definitely

[@elulysero8863]

Man please make a comparison of this gold v2 vs a skar vxf. Side to side

[@Jared535]

I think the V1s struggled with the power because the box was quite a bit too big. Thoughts?

[@HiFiVector]

Yes with them running on a smart 5 being WAY overpowered the 4 cuft per sub was a little much . But if you run them on a more normal power amp 4 cuft each will be perfect. So it just depends on how much Power you’re going to try to feed them . But actually the box is fine they over powered . But still did pretty well even though they are 1000 w rms each. Generally 4 cuft is great for a 15” sub. But if you’re going to grossly overpower, then yes, you should reduce box size to help with power handling.

[@dabeardsmen3621]

Wish they would’ve just updated the surround and basket trying to keep it around $299

[@elcaminosupersport]

If using smart bass amp why not get D2 models

[@egm092478]

Awesome video till the sound test , that phone's mic is awesome. My brother video my system and it also sounded wierd.

[@strykerls3740]

Isn’t this a TI frame?

[@Gunnaguna]

Hmm I wonder which hits the lows better the v1s or the vxf

[@craigengelman1369]

$410 and up right now on amazon !

[@RyanBassForLife]

Wow I really like those new Resilient Sounds Gold subwoofers. They also sound awesome.

[@marcusstanley9317]

Can you review the DS 18 EXL XX 15?

[@FrenicX]

I just got a set of these exactly like yours and got them in a box I built to the specs on the website. You are absolutely right about how smooth they are! Almost scary smooth, there's no mechanical indicators to tell when you're giving them too much, just smells and heat lol. That being said, I'm having a hard time finding a good range to run them at without overheating. Using a Taramps 5k bass. They sound amazing, though.

[@HiFiVector]

Yep they are soooo smooth I love the way they sound.

[@jayrands5380]

Overheating? On 1 5k?

[@dead6last]

had the same problem on the v1 15s, use EQ to tune out the higher frequency.. much less heat

[@jayrands5380]

@@dead6last did you have them inverted?

[@undernature2799]

Nice man 👍 I've only seen them in spl setups which I'm not interested in. Nice enclosures dude. How thick plexi are you using? Been meaning to ask like forever 😂 Highly appreciated ty sir

[@HiFiVector]

.5” lexan

[@undernature2799]

@@HiFiVector ty sir

[@HiFiVector]

You’re very welcome man!

[@bobcat3653]

Yeah his enclosures look very classy !! 🤠👌

[@undernature2799]

@@bobcat3653 for sure

[@streetracin6977]

I’m just using a DMM and the clip monitor that comes with it! It’s on a 2013 Nissan armada platinum with the Bose factory system! I used a LOC the 1st was the kicker with the remote out and now I’m using the PAC LP7-2 bc It allows me to set the gain on the LOC bc I thought that it was causing clipping bc the kicker one wasn’t adjustable and I thought I wasn’t running the right Volts (rca) in that my amp called for! I have 1/0 OFC gauge power and ground, have a good ground, running a taramps big boss 3 wire to 4 ohms(1750w) with a resilient sounds 15 gold v2, phase and everything is fine! Stock alt, no big 3! Thanks for your time! 🫡💪🏼💯 Also I would like to mention I took your advice and bought the same screws, washers, and stripping to go around the speaker before installing it! Lol

[@HiFiVector]

Check your voltage at the amp when clipping . Maybe it’s your electrical. Other than that seems like you checked every else so not sure.

[@travisbarrow3408]

Shouldnt you take the trim ring off, drive the screws and then install the trim ring?

[@HiFiVector]

No, on these if you try and use screws under the ring the ring won't fit back on. I tried that after you mentioned this and it did not work.

[@girthquake9655]

Awesome review!

[@HiFiVector]

Thank you!

[@Gunnaguna]

Try the platinums 😏

[@wesleywilson4388]

Yo hifi id really like if u add more footage of the subs flexing on various different songs. We wanna see those bad boys really move. Also your bass doesn't translate thru the camera as well as some of the other sub reviewers out there. Idk if that's the camera or mic or what. But just offering feedback. The more flex u give us and the better u can make the bass translate thru the vid the more exciting it is for the viewers.

[@HiFiVector]

Thanks for the feedback I’ll keep that in mind

[@jayrands5380]

​@@HiFiVectoryeah more demo video of subs = more affiliate link sales..

[@edwinhoward6530]

What box builder program do you use?

[@streetracin6977]

Hey I’m curious since you have the armada also if you know of a existing grommet, that I can run a 0 ga wire through the fire wall, and if not how/where did you run yours!? I see you have alt power but I’m assuming you still have power ran to it from front, for alternator purposes!? Pls any help would be much appreciated! Thanks bro and keep up good work! Enjoy the videos

[@JAM-ur8tj]

That OMG got me rolling man!!😂😂😂

[@jonny8547]

I have a dumb question. Would 2 platinum 15s sound as good as 2 gold 15s on 5k Watts? Or would the platinums need more power to get moving? Or can I just look at their sensitivity rating and tell? Sorry I’m gonna buy the RS but torn bn the gold and platinum

[@HiFiVector]

It’s not dumb at all it’s a good question. You would be better off getting the golds on a 5k. The plattys on a 5k would not be enough to wake them up fully where 5k on the golds would a good setup even though the gold can even take a little more.

[@jonny8547]

@@HiFiVector thanks, that’s what I was thinking. I wanted the platinum bc the v2 is on sale and has an all carbon fiber cone and dust cap and looks beautiful but I don’t feel like upgrading amps yet so I’m “stuck” with the gold lol

[@hypefilms6061]

really looks as the avatar stu

[@Jared535]

Great looking subs. How do they compare to the VXF?

[@justinboone8700]

Shit all over the vxf go with the platinums

[@HiFiVector]

Vxf are great these have more excursion, hit the lows a little better and are smoother. But vxf have a little more slap.

[@jayrands5380]

​@@justinboone8700who the f asked you

[@justinboone8700]

@@jayrands5380 I bet I’m louder than you.

[@jayrands5380]

​@@justinboone8700 LOUDER MOUTH!!! Yep u got me💤💤💤

[@RomaVilla]

People say these gold v2 are just a platinum v1 with new baskets. Aside from the 8 layer coil and 9.25 spider vs the 10 in spider on the gold v2. Are these golds any better than the platty v1 in any way

[@rooterbooter405]

That's my question

[@onesikm3]

They literally knocked off the emf banhammer woofer design down to the T especially on the 12s, pretty sure they went thru the same vendor that I’m familiar with in china

[@jonny8547]

I was wanting these subs and this video pushed me over the edge and I’m ordering these in the next few days. My only problem is Does anyone know why they don’t have a gasket on them anymore? Does the company just expect everyone to buy their own gasket material to install these? It just seems bizarre to me. Do any other subs do that too, not have a gasket and u have to buy it separate and stick it on yourself?

[@HiFiVector]

Yes it’s normal a lot of subs do not have any gasket material under the lip of the mounting ring.

[@ResilientSounds276]

I just preordered the platinum V2 can’t wait to get it. Will you be trying the platinum v2 or the platinum v1 out?

[@HiFiVector]

I’m gonna try to get my hands on a platinum V2 to try out.

[@ResilientSounds276]

@@HiFiVectorcan’t wait for the video. 🔥 videos brother.

[@ramsesfelix388]

​@@ResilientSounds276Hey man did you installed the V2 RS?

[@kimrie26]

Can you do a review on the new version cerwin Vega ST152D stroker series? Not quite a budget sub but I hear they bang and might be making a comeback. Thought it be cool to see you test them out.

[@HiFiVector]

I’ll keep that in mind thank you

[@TMikeG]

Any word on the platinum v2s? Awesome video and review dude.

[@HiFiVector]

Thank you man! I haven’t heard anything on the platinum v2’s but I’m also not affiliated with resilient sounds so I don’t have any secret 411 :)

[@crazyorwhat]

Hi Hifi Vector, do you have a numbered list of your favorite subwoofers?

[@HiFiVector]

I don’t really have a list. it’s difficult to say because each sub has a different sound characteristic than others so a lot of it just depends on what sounds good to your ears, so I have many favorites but their favorites for different reasons because of the way they sound some of my favorites are very tight dry and clean. Some of my favorites are very warm, smooth etc. sub sounds so different that sometimes it’s hard to have a clear winner because it’s personal preference and the distinctive sound.

[@7yaoal]

Thank you so much for the amazing review. I like SQL, so do you think this sub would be better than the Deaf Bounce Apocalypse DB-SA305 (2000 RMS)

[@HiFiVector]

It’s been a while since I have heard that DB so can’t say for sure. But these subs are killer.

[@quevicular]

That's my pet peeve with cutting holes for subwoofers. 8 inch subwoofer should have 7 inch cut 10 inch subwoofer should have 9 inch cut 12 inch subwoofer should have 11 inch cut and so on.

[@BrianWaller-qe7gr]

Yep why can’t there be a standard across the board

[@joshuameyer7342]

I like them boxes

[@egm092478]

I just bought one 15 and don't know what box to put them in , I mean they say in the website 3.5cu but that's not possible. I'll go for now with 4. 25cu at 32hz

[@HiFiVector]

4.25 net is good I like 34hz with them but 32 will be fine as well.

[@edwinhoward6530]

vxf or gold?

[@HiFiVector]

Gold v2 I like a little better than the vxf but vxf is still awesome.

[@edwinhoward6530]

what size/tuning are the boxes?@@HiFiVector

[@HiFiVector]

4 cuft net each 33hz

[@christsideurbanstreetminis2183]

I've been looking at these Also looking at the vxf, and avatar, How do you figure motor force? For comparison on these 3 subs

[@onesikm3]

Are you looking at 12s or 15?

[@christsideurbanstreetminis2183]

@@onesikm3 15s

[@HiFiVector]

I can check my notes and let you know the vxf and ts gold motor force but haven’t tested an avatar yet. I will tell you the ts gold v2 are freaking epic. And the vxf are xlnt. Just depend on what you are looking for and the type of bass you like because they are very different.

[@onesikm3]

@@HiFiVector well I’m hoping I like em because I have the 12” gold v2 being delivered later today 😁 I’m excited and nervous at the same time! I hope I didn’t just make a 350 mistake lol I’m pretty happy with my current setup but I’ve been wanting a ti frame with a 10” spider landing and 300oz motor for a long time coming 🤞🏼

[@jayrands5380]

​@@onesikm3I got an 18 being delivered today too.... How do you like your 12?

[@mattclark2641]

I just purchased 2 10 inch V2 gold series. I'll be running them off a DB Apocalypse 5000W mono @ 1ohm. What size speaker wire would you recommend 12 or 10 gauge? For past builds, I would use 8 gauge but prices are way up for wire and everything is pretty close together so any recommendations on wire size?

[@HiFiVector]

If you are doing a separate run to each sub from the amp 12 gauge is fine if you are running only one cable from amp to both speakers 10 gauge will work.

[@1ohmwrecker]

😮 my Xv3 12's on a smart 5k does a 147.6 in my car! wow!

[@1ohmwrecker]

@evilinside5984 I'm just shocked I see alot of ppl with a suv with similar setups doing almost 150's. And like u said I got a smaller vehicle so it should be easier for me lol. My box is 4.5cf tuned to 31hz. It's half a cube too small but it's the biggest I could get to fit. Another thing, the my vehicle peak is 33hz so I get that number at a decently low frequency. I got it set to smash lows lol.

[@jayrands5380]

​@@1ohmwreckerdid you hit a 150 yet?

[@1ohmwrecker]

@jayrands5380 I assume if I get an 8k I would pretty simply. But as of now no. But this summer change is coming... 💪

[@jayrands5380]

@@1ohmwrecker yeah not a bad score for a set of 12's. I haven't watched any of your videos lately (work) have you got a high output alt or any lithium? I always like your Mercedes.. so many times I almost bought a white one just like yours.

[@1ohmwrecker]

@jayrands5380 yeah 300a autotech and headway lithium bank. Gonna go to the scib banks tho.

[@HeriTorres-i8l]

You think a deaf bonce aak-4000.1 can push 2 of this at .5ohm

[@HiFiVector]

Yes, they can talk more but it should do pretty good.

[@WesleyLawrence-o5d]

I’m thinking I’m going to do a blow through on my Tacoma. I have a JP23V2 (3300 watts rms) what would be the best match for the RS subs in a 4th order? 2 gold 12” v1’s? 1 platinum or gold v2 12”?

[@HiFiVector]

If it were me with that setup I would do 2 v1 subs on that amp.

[@EthanMiller-z8z]

Which has better spl the resilient sounds or skar vxf

[@HiFiVector]

Resilience sounds gold v2. But skar vxf are very good as well.

[@rudyrue07]

Did these make it to your Top 5 like the Gold V1 ?

[@HiFiVector]

Yes I like them better than the gold v1 :)

[@reginalddavis3083]

​@@HiFiVectorWhat is your Top 5? I'm currently running a vxf12 on low power but still sounds great, I can't wait to get a new amp😊

[@kimrie26]

Would you recommend the gold v2 18 ?

[@HiFiVector]

Never tried the 18 but I have the 12’a and 15’s and they are amazing so I’m sure the 18 is great as well.

[@kimrie26]

@@HiFiVector I asked because they are only $20 more on their website. Which is awesome , hellava deal. Thanks for sharing your knowledge brother. I went from almost going with the vxf 15 but after watching this video you convinced me to go with the gold v2 15. Do you recommend any places to purchase from?

[@HiFiVector]

Honestly I love both the vxf and ts gold v2 2 of my favorite subs. Buy them from resilient sounds direct. They are super nice guys with fast shipping.

[@isiahgreen8405]

On the resilient sounds website. It says the FS is 27Hz. On your sheet it said 33Hz. What is going on?

[@HiFiVector]

After the subs are fully broke in the fs will drop. When I pull the ts parameters it is when the subs are new or only after a very short break in not fully broke in.

[@isiahgreen8405]

@@HiFiVector So do you know if Resilient Sounds are providing the FS after the woofer is broken in?

[@chachayteti4life]

Between this and the vxf, which one has better sql?

[@HiFiVector]

Man that’s a tough one because they are both good just different. Can’t go wrong with either.

[@chachayteti4life]

Will the vxf handle 3000rms of clean power?

[@jimt5683]

5k on 2 15 can't break a 150?

[@jimt5683]

@@evilinside5984 I agree with everything you said ! but a 150 is easily capable with the equipment he has

[@supadupa6891]

Will two 12in version of these hit hard with a Surge PL-3000.1 at 1ohm?

[@HiFiVector]

Although they can take more power , Yes they will work with the PL3000 just fine.

[@supadupa6891]

@@HiFiVector ok. I was wondering if it would push them hard enough and I'm sure because of rise they wouldn't really see a full 1500w each. Also, im a sealed box kind of guy. You think they'll still do great sealed?

[@supadupa6891]

@@HiFiVector another question. Can I wire two dual 4s in series and a dual 2 in series for a 2ohm load? Can I also wire two dual 2s in series and one dual 4 in parallel for a 1ohm load? Someone said I couldn't do either of these set ups. But I wanted to get another opinion.

[@ResilientSounds276]

Would you sell one of those boxes? I’m very interested and would pay shipping it’s for a VXF15

[@HiFiVector]

No sorry those boxes I just made for myself.

[@ResilientSounds276]

@@HiFiVectorthanks I’ve been looking for a good box for 1 15 do you recommend any or websites? because I can’t find any. Also 🔥 videos

[@Treedeep]

@@ResilientSounds276probably a little late but d4s has tru spec boxes they bulky tho

[@kevinmoore6640]

Do you think these would handle a jp63-83?

[@MrILLryder]

No they would burn up. I have platinum 12’s and I had to turn the amp way down because the 12 Plat’s started smoking. I have a JP43 at 1ohm.

[@travisjones7027]

@@MrILLryderyour box must be wrong for them

[@egm092478]

What's the size of the box please, I just bought one of this 15 v2 and don't know what box to get. Thinking of doing a 4 25 cu tuned to 32 hz

[@HiFiVector]

I used 4cuft 34 hz. But 4.25 and 31hz will be great as well. These subs total hammer the lows so I like 34 because it gives them a little more up top.

[@egm092478]

Dude i order a box from gp and they screwed me , i asked for a 4cu and they senme 3.25cu plus they didn't send the birch double baffled and the cut out is so small that i can't screw the Subwoofer in on the bottom or top. Now im trying to send it back and hope they don't screw me , oh and it took 5 wee to get a box that is useless. I like low bass what box do you recommend. Thanks

[@jonny8547]

Do u mind sharing your box specs? Cubic feet, tuning, and port area? I just got my gold v2 15s in the mail today and I’m excited to try building my first box for them. I’ve been playing around on winisd and sub box pro and I’ve settled on 6.5 net cubes for 2 subs, and I’m going for 16 in of port area per cube so about 104 square inches of port area and I’m going to tune it to 33…thoughts?

[@HiFiVector]

8 cuft 100sq in port 34hz. If you are going to over power them 6.5 cuft will be good but 8cuft will sound better but will handle a little less power because of the increased net volume. These subs love big boxes. But your specs will be good as well.

[@joeanderson9505]

Definitely buy longer screws then on here because they will back out

[@Bigislandguy]

The gold v1 15’s were in a 8 cube box. What’s the size of these?

[@HiFiVector]

4cuft for each sub. I built the specs the same. Just made separate so easier to move.

[@Bigislandguy]

@@HiFiVector do you think turning my box to 25-26hz is too low? It’s for 2gold 15 v1 but I have 2 v2 coming. I might or use the same box for v2 later. I’m interested in your thoughts.

[@HiFiVector]

Yea in my opinion that’s way too low. These subs already hit the lows insane even with 33 to 35 hz tuning. So if you go lower you aren’t gaining much but you are losing the bass that’s more audible n the musical zone. The sundown x series like this as well and actually sound better in the 32 to 35hz range.

[@streetracin6977]

I have a single 15 gold v2 and taramps big boss 3, I’m having trouble with clipping! I’m not able to touch the gain b4 it wants to start to clip! Any suggestions, anything helps, thanks! I barely touch the gain and it starts to clip, I should mention I have the dvc 2 ohm wired to 4ohm for half the power from the amp!

[@HiFiVector]

What are you using to measure clipping? What vehicle? What electrical?

[@got2getit204]

I’ll just stick with my Vxfs until I decide to spend more on a sub of my choice!

[@Ernestosgarage]

That LTO bank how much is something like that

[@HiFiVector]

Check out my how to build an LTO video for information and there’s also links in the description you can check out for the cost

[@streetracin6977]

Do you have that in an armada!? I just purchased 1 gold 15 v2 with a smart 3k to put in my armada platinum!

[@HiFiVector]

Yes. Armada .love these subs put it in a good box and that will be a great amp sub combo.

[@streetracin6977]

@@HiFiVector I need 1 them custom boxes you have!? LoL they are really sharp and love the color combo with the speaker/box & plexi! I would Throw some red leds inside or get the plexi engraved! Thanks for the reply

[@ResilientSounds276]

How are they on the low notes?

[@HiFiVector]

Amazing

[@marcovaldovinos5009]

Great video❤

[@HiFiVector]

Thank you!!

[@williejr1970]

Are you selling the subwoofer enclosure i just need one i just purchase the V2-15

[@HiFiVector]

No sorry

[@chachayteti4life]

Do you have a link for that bank?

[@HiFiVector]

Check out my how to build an LTO video it has links to everything in the description

[@CombatCanadian]

How are these in a sealed box? I’m going for SQ

[@girthquake9655]

Just buy stereo integrity SQL's. They dig deep in a ported box. I had SQL 15"s in ported and I've never heard subs get that low in a sealed box.

[@jayrands5380]

​@@girthquake9655how much power, what size box. I'm interested in then si subs

[@girthquake9655]

@@jayrands5380 cab-22, 5ft³ box 2.5ft³ per chamber.

[@jayrands5380]

@@girthquake9655 ty. Ever meter it?

[@girthquake9655]

@@jayrands5380 No. Don't expect them to get as loud as a ported box. The frequency is very linear in a sealed box.

[@wallheadkdir]

What am I missing? My gravity g7-12d2 are 4800watts but they don't look like these subs and are cheaper 🤔 don't get me wrong they BUMP

[@TheGodofSEO]

Wait did you have the SPL test at 1ohm

[@HiFiVector]

Yes final 1 ohm

[@TheGodofSEO]

@@HiFiVector that’s badass

[@HiFiVector]

They are soooo bad ass :)

[@TheGodofSEO]

@@HiFiVector can you test box rise?

[@HiFiVector]

I’ll try

[@thebreakbarrelshow]

These look evil. Could you imagine a pair of 18's .. might trigger a tsunami..lol

[@YEBOI-jw3hu]

I WANT IT 🎉

[@joshholden8561]

Almost getting to 150 db. Hell yeah that set up is way oast just a daily set up u got 5k watts just for. Bass

[@J_h_420]

5k is the new daily nowadays, thought u knew.

[@brockmarquis8511]

Remind me a lot of the avatar

[@AndySauceda-d2x]

CAN YOU TRY SOMETHING NEW LIKE 1 10 WITH A 15 PASSIVE RADIATOR SUBWOOFER 😶‍🌫️

[@DibeezyTheGifted]

I like them besides the metal gasket ring. Much prefer the old rubber gaskets. With so many companies swapping to these metal gaskets that tells me the rubber ones must be more expensive to produce

[@BrianWaller-qe7gr]

Makes sense because most rubbers are made from crude oil unless it’s recycled rubber, with the high costs of crude oil recently I can see fabricating a metal ring would be cheaper

[@catch22frubert]

​@@BrianWaller-qe7grRubber is made from trees my guy, but still, op is correct. Always cheaper to not include the gasket and make sealing the subwoofer the buyers responsibility. 1 less part to source, transport, and pay for. Also less shipping weight per subwoofer. It all adds up.

[@PeteDuncan-q2u]

Version 1 is great yet to yea version 2

[@BLAxWOLF-i]

I have the gold V.1 so I know the v.2 SLAPPS

[@edycalderon1282]

Nice

[@Psy6o]

Try dc audio

[@beemackin2316]

Nice 1

[@AndySauceda-d2x]

1 10 with 500 rms with a 15 passive radiator subwoofer 👁

[@smurfeco2.358]

Tbh this looks like a copy of the rage xl v2 that just came out . I have the v1 but it has a fatter surround and not as deep .

[@fishrrelaxing9361]

I’m him gonna make a drinking game every time there is a comment about the basket.. wtf care about the basket? It goes inside the box.. long as it supports the motor.. allows for a big piston and long throw then nothing else matters? What I see from v1 to v2 in this is looks like mostly they increased the mechanical travel.. as such they have to increase the motor force a little so it can overcome the air compression to actually make use of that new travel.. That’s the only part of the basket that means jack. The reason the cutout is larger is because in order to get more travel wo tearing spiders or surrounds you can only do that by increasing the diameter of the spider. In order to increase thr the backer has to have larger diameter and as such larger cutout. Of the cut out was the same.. it would just be a branded v1 as a v2 lol😂. Not funny tbh cause that is actually what a lot of companies actually do. Clearly need more power they hardly moving.. And for what it’s worth.. idk how anyone that has an equinox (which isn’t a truck it’s a crossover lol.. doesn’t replace that center dash.. worst design of any automobile ever.. looks more like a spaceship with all those buttons.. if I owned one the first thing would be like a 14” tablet to replace all that.. Odd that’s the only vehicle they make that has that console.. the traverse which is very similar just little larger has a standard setup..

[@BeatsByGRIMM]

👍💪💪🔊

[@jayboogie7956]

Too bad they don't make them in 8s

[@HiFiVector]

I know, I wander why they don’t?

[@jdmintegradp]

Looks like a B2 subwoofer from a far imo ....

[@HiFiVector]

Yeah, there’s a little bit of resemblance, but I have both and I’ll tell you they sound totally different. They’re completely different subs but honestly, both are some of my favorite subs so they’re both great.

[@audioaddict4193]

Need more power

[@RyanBassForLife]

Wow I love it but he needs a Taramps smart 8k.

[@Og_Rizzo]

I would never ever flip my subwoofer upside down resting it on its surround DONT DO THIS PEOPLE

[@Hertzsogood219]

You've obviously never had a good sub with a nice, thick, deep roll surround.

[@mikessplboxes7497]

Modernish woofers=shiton of watts to get loud

[@HiFiVector]

That’s true!

[@TheArtisanTouch]

That’s a horrible fkn design wtf

[@J_h_420]

You obviously don't know shit and haven't heard these in person.

[@Hertzsogood219]

LMMFAO!! 🤣🤣😂😂

[@headhoncho4890]

🦫 yea especially the amps. I have the senergy syn65.1 I’d like to see the numbers