Resin Design Jewel Tones: Glass, gilding flakes, acrylic, alcohol ink and metallic powders

The same twinkling jewel design in 4 colors. See the timestamps below if you want to skip through and see only one colorway. I was going to do half in silver, but it's a challenge to have out two different colors of gilding flakes at once :-)
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/...
00:00 Jewel tones in resin
00:10 Amethyst Layer 1
02:30 Sapphire Layer 1
05:21 Ruby Layer 1
08:32 Emerald Layer 1
12:37 Layer 2 Step 1(gilding flakes)
13:24 Amethyst Layer 2 (step 2)
19:40 Sapphire Layer 2 (step 2)
22:41 Ruby Layer 2 (step 2)
26:04 Emerald Layer 2 (step 2)
30:09 Layer 3 (clear and gold)
33:28 Tink and Cheddar
33:33 Layer 4
34:05 Sand and Prep for final clear coat
34:18 Finished!
I am an Amazon associate; I receive commissions from the qualifying links to amazon listed below:
Amethyst:
Dr. PH Martin Magenta: amzn.to/3w6EMEb
Pinata Jacquard senorita magenta: amzn.to/2OlEVn7
Purple-Violet (Brea Reese) www.michaels.c...
Sapphire:
Liquitex acrylic ink Prussian blue: amzn.to/38rrB6d
Alcohol ink Sky Ceil: www.breareese....
Dr. Ph Martin Bombay ink Blue: amzn.to/3zqB3Tp
Pinata Jacquard Baja Blue: amzn.to/3wd
Emerald:
Dr PH Martin’s Green ink: amzn.to/3r5eCz3
Ranger Alcohol ink, Limeade: amzn.to/3kMegO3
Ruby:
Tim holtz alcohol ink, watermelon: amzn.to/3iUoPft
Pinata alcohol ink “Chili Pepper Red”: amzn.to/2QtOXji
Daler Rowney acrylic ink, crimson: amzn.to/3iCDED2
Gold:
Just Resin Gold Pigment Paste: justresin.shop...
Let’s Resin Metallic Powders: amzn.to/3roX6WA
Gold Flakes: Many versions of these can be found I used:
KINNO Gilding Flakes - Color 2.5 Imitation Gold/Copper/Silver
amzn.to/3dU1h5K
Broken Glass (I found mine at a craft store -used for putting in a vase as an accent)
amzn.to/2VO8b6m
Coaster molds:
3.9 inch: amzn.to/31HJ2hr
Coaster bottoms:
Coaster Cork bottoms (regular size):
amzn.to/2ZFG6iC
(this is just link where I found them - you may have a better idea)
Typical tools I use:
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” even though the packaging is called painters tape (the guys ate Lowe’s explained why I couldn’t google it (LOL) amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/s...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu
Resin I used: MiraKleer Table Top: amzn.to/2Zl9ziR

[@dianecrites8452]

16 coaster at one time! Wow! They are so beautiful! Video was worth the wait😊

[@johnniewornstaff221]

Absolutely gorgeous! Not only did you create beautiful coasters you created 16 beautiful coasters. You are so talented. Amazing ❤️💜💙💚

[@victoria1687]

Wow.. the blue ones look so deep.. all are gorgeous 😍

[@issagalangue4113]

Your artworks is one of my inspirations and motivates me doing resin. ❤️ ❤️

[@janicehelmore-pouringwithf3360]

What an amazing marathon of work! Love them all particularly ruby and emerald 💖💖💖👏👏👏🇦🇺

[@suewarnes9469]

They are stunning! The emerald is my favourite 💚 thank you.

[@naptimecreations]

So pretty 😍😍😍

[@patriciaharkin1571]

Wow, so decadent, beautiful.

[@gourdhead22]

Those are just Beautiful. Love all the colors. I was so excited to see a video from you. Thanks Hugs Sheryl 💙🎨💙

[@IdahoRanchGirl]

Little girl was easier to understand than all the other calls. What an articulate little girl! So sad she had to go through that scenario.

[@IdahoRanchGirl]

Sorry wrong video for my comment!

[@domimassou5457]

Beautifull work lovely colors

[@sheilikas8910]

These are so unrealistic beauties....I always feel so many layers wouldn't make a difference...but u prove me wrong everytime 😍...love from India ❤️🥰

[@CeruleanBlue1967]

Amazingly BEAUTIFUL!

[@annagravante3884]

Wow oh how I love the colours I could spend hours just staring into them what a fabulous artist you are really enjoyed your tutorial thank you so much for sharing ❤

[@PennyTailsupStories]

Stunning, magical and bright! This design really is like jewelry for your coffee table!

[@sheenadavis5422]

Absolutely stunning!!!

[@lisa1ramaglia2]

Absolutely beautiful.

[@shane5647]

Beautiful 😍

[@barbaraparker8225]

That was a LOT of work, but they came out so pretty.

[@sheseclectic3858]

Gorgeous as always. I feel like I could probably lose an afternoon staring into one of those.

[@pamelagunn1045]

Beautiful 💖

[@kathysausen6493]

Bravo!!!!👏👏Gorgeous 💕🧜‍♀️

[@stacy_thecraftycat6611]

Another fabulous creation! I will have to try these myself although I will probably just do one of each color.

[@pamcolechadwell1302]

There gorgeous, Thank you

[@andreagriffioen73]

So beautyful

[@lisadarrah5251]

gorgeous!!!

[@ResinAsYouWish]

00:00 Jewel tones in resin 00:10 Amethyst Layer 1 02:30 Sapphire Layer 1 05:21 Ruby Layer 1 08:32 Emerald Layer 1 12:37 Layer 2 Step 1(gilding flakes) 13:24 Amethyst Layer 2 (step 2) 19:40 Sapphire Layer 2 (step 2) 22:41 Ruby Layer 2 (step 2) 26:04 Emerald Layer 2 (step 2) 30:09 Layer 3 (clear and gold) 33:28 Tink and Cheddar 33:33 Layer 4 34:05 Sand and Prep for final clear coat 34:18 Finished!

[@pradnyarane6769]

❤️

[@shelleydrost5551]

Thanks for the wonderful video! Can you explain what the sanding before the final coat does? I’m still new to resin and I don’t know what this step does. Also when you sand do you sand down the lip on the top? Thanks!

[@ResinAsYouWish]

Hi, I do sand down the lip - pin.it/121qIIj

[@lissamarieify]

These are beautiful! can't wait to try this! I have a question about the very last step when you put the final coat on. I noticed they were now out of the molds and you poured the resin directly on top. By doing this, are you having to re-sand the bottom from the resin that is pooling there or are you just trimming it off? Thanks!

[@kellyclose9980]

She tapes the bottoms off, so there is no re sanding. She has a video where she shows her process.

[@ResinAsYouWish]

Hi, here is a short video on how I finish up coasters: kzbin.info/www/bejne/q6aaXmmpo614kM0

[@cc-ti3lg]

First one to give like.

[@jennifermarie1230]

Do you have a tutorial how to tape the bottom of the piece so no drips??

[@ResinAsYouWish]

Here: kzbin.info/www/bejne/q6aaXmmpo614kM0 😀

[@jennifermarie1230]

@@ResinAsYouWish thank you so much for the quick response! I am new to resin and I’m trying to make Some different projects. Your videos are great, I’ve only watched two so far but excited to see your different techniques.

[@agnieszkakoslak4523]

Hello, I would like to ask what this glass filler is for

[@ResinAsYouWish]

I only use the glass because it give really beautiful effects inside the coaster

[@Uhrenfreund.]

Second 😁😁

[@teressa7666]

I really wanted to see what the back looks like before you put the cork on it. You never really show the finished backs.

[@ritazwanink5069]

Love what you did but I ain’t gonna lie… the music is repetitive and grating.