Resin Photoframe 🌻| Complete Tutorial 🤍

Resin Photoframe 🌻| Complete Tutorial 🤍
~Contents in the video-
1) Materials used to make the customized resin photoframe
2) How to mix resin & hardener
3) How to pour the resin into the mould
4) How to add sparkles & flakes in the photoframe
5) How to add a finishing look to your product
6) How to cover the sides & edges of the product with marker
7) Final result
Note- For the photo to be put in the resin, the photo should be laminated or you can also take a glossy print (sometimes the result may change depending upon the quality of the print)
✨🤍✨🤍✨🤍✨🤍✨🤍✨🤍✨🤍✨
~Links of the products used-
Epoxy Resin -
tulsiresin.com/products/tulsi...
Weighing machine -
tulsiresin.com/products/white...
Golden resin marker-
tulsiresin.com/products/golde...
Silver resin marker-
tulsiresin.com/products/silve...
Heart shaped mould -
Product Code: TSMR120
www.themouldstory.com
Circle agate shaped mould-
Product Code: TSMR114
www.themouldstory.com
Foil flakes(gold, silver & rosegold)-
tulsiresin.com/products/foil-...
Glitters-
thekraftykart.com/products/gl...
Wooden sticks-
tulsiresin.com/products/big-w...
~Safety products links -
3M Safety Goggles Model 1621, Polycarbonate, Protects From Chemical Splashes, Clear Lens, Hardcoat, Transparent Goggles, Multipurpose For Industrial, Lab And Hospital, ANSI Z87.1 (Pack of 1) amzn.eu/d/cBd5qDj
Nitrile Hand Gloves | Medical Grade 4g |1 Box - 100 Gloves Disposable | Blue | Food Grade | CE Approved | Non Sterile | Medical Examination | All-Purpose | Powder free | Cleaning | Latex Free (Medium) amzn.eu/d/1upWHtO
3M NIOSH Approved Medium Half Facepiece and 6003 Organic Vapour/Acid Gas Cartridge (Multicolour)- Set of 2 Pcs amzn.eu/d/1IhtgIQ
(I haven't made use of this mask during the video but recently l bought this mask)
🌸🌷🌸🌷🌸🌷🌸🌷🌸🌷🌸🌷🌸🌷🌸
App used for editing - KineMaster & Canva
Song used in the video- Lazy Night(KinMaster app)
🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸
Hope you like & understand this video😊
If any doubts do ask in the comments section below 👇
Will try to answer as much as l can🌼
Please like, share, comment & subscribe💕
Thank you so much for your time ❤️❤️
🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻🌻

[@art_incarnation_]

Links to Resin & Other Art Tutorial videos: Resin Beach Art Tutorial video- kzbin.info/www/bejne/eoa6mIennNqGibssi=SCiHemhZ9CcTOmNL Resin Tricolour Coasters video- kzbin.info/www/bejne/lX3UqaV9m7Wlgdk Resin Rakhi Tutorial video - kzbin.info/www/bejne/oYO4m2h3fbt6aLs Resin Phonecase video- kzbin.info/www/bejne/eWqlfGODhrWVb5Y How to put beads in thread in an easy way video- kzbin.info/www/bejne/rnWkf3t6iMd2l7M Resin Art Fail video- kzbin.info/www/bejne/hWPCm6Kqjspqadk Dark Aesthetic Clay Art video- kzbin.info/www/bejne/emnbp4iroaaGd8k Acrylic Landscape Painting video- kzbin.info/www/bejne/bnq2maKHZdqZiqc Know about Resin Art Moulds video- kzbin.info/www/bejne/jH22eXuXfaaVi9k Resin Mini Bookmarks video- kzbin.info/www/bejne/sGXNp42ufpKildk Resin Jewellery video- kzbin.info/www/bejne/jHfKgGB7l7KLiZo Resin Pendants video- kzbin.info/www/bejne/n6DVc6OYZbiDmrM Used Camlin Brush Pens video- kzbin.info/www/bejne/j2iVnp6lg85no68 Resin Keychains video- kzbin.info/www/bejne/r2PCiKqjbJZnjNk Resin Photoframe video- kzbin.info/www/bejne/jaasn2qtqrFkkMU Resin Art FAQ's - kzbin.info/www/bejne/bYbcp59_pNSqiLs Resin Diary video- kzbin.info/www/bejne/eHzSfoxvnpKdn6M Different types of resin colorants- kzbin.info/www/bejne/eH6Wn5-MjK6qhrs Resin Spotify Keychain video - kzbin.info/www/bejne/r5OtaWCpe95qh5o Acrylic Wood log painting - kzbin.info/www/bejne/qGPJoHWkqb-dhNU

[@omkarbordavekar4098]

Very nice explanation with clear instructions. The good part is that you provided links for the products. Thank you so much.

[@art_incarnation_]

Thank you so much for your feedback! Glad you liked it 😊

[@brendafernandes9025]

Thank you for your video. I really appreciate the way you explain simple n easy.

[@art_incarnation_]

Nice to hear you understood the video 😊

[@lakshaluck8664]

Amazing really the way you explained is very good

[@art_incarnation_]

Thank you so much 😊

[@monikachawla6811]

Very nicely explained .Nice photo frames 👌👌👌

[@art_incarnation_]

Thank you so much 😊

[@user-bk1di5pi4q]

Thank you so much I learn a lot from you bless you

[@art_incarnation_]

Always welcome...glad you like my videos!❤️

[@zainabsendu8197]

Amazing simple explanation which understands easily 👌👍

[@art_incarnation_]

Thank you 😊

[@smilepatience1831]

Beautiful

[@art_incarnation_]

Thank you 😊

[@RamMalampuzha]

Beautiful...

[@art_incarnation_]

Thank you sir😊

[@NilaVhat]

Awesome 👌👌👌

[@art_incarnation_]

Thank you 😊

[@aasthaMulchandani7915]

Super 😍.. very well explained

[@art_incarnation_]

Thank you so much 😊

[@estherakpona1942]

Lovely 🌹🌹.

[@art_incarnation_]

Thank you ❤️

[@zuvairiya7758]

@art_incarnation So amazing D doubt is sister every mould u used has different gms of resin n hardener how i chosed in tat way?

[@art_incarnation_]

Thank you! You can use a resin calculator from Google or any other site & then pour water in the mould & measure it with weighing machine to understand the gms ..& also you will get approximate value from experience & if any extra resin is left you can pour it in other mould so that it won't be wasted. Hope this helps😊

[@TulikaChangmaivlogs]

nice ❤

[@art_incarnation_]

Thank you so much 😊

[@pranalikamble3734]

Hi... You explained it very.... I had also tried but got the bubbles into it.... So I used the lighter... The area where i used the ligheter that got whitish spot.... And the whole frame is looking blurry.... Can please suggest over this.... Thank you

[@art_incarnation_]

You can try sanding the top of the resin artwork & then you can pour a top coat of resin on to the artwork.

[@dr.mallikaperiasamy5307]

Very well explained! I would like to know two things. First one is the names is it normal paper print u used or something else? The second is after placing the photo,rose , glitter there is no need to wait for 24hrs and scrape with sand paper and pour the final layer can v pour it immediately?

[@art_incarnation_]

Thank you so much ❤️ For the first question, the print is on normal paper but it is also laminated to protect it from getting soaked in resin. For the 2nd question, yes you can pour the 2nd layer directly, in the video l poured it directly only and even if you work in layers, it is also fine. The first layer is completely dried when there is any pigment in resin or if the photo is constantly rising up, so that time let the first layer dry completely for 24 hrs and then pour the 2nd layer. Hope this helps 😊

[@nikitashanbhag4630]

Hello, may I know how to dry the flowers? Because i tried to dry by pressing and in silica gel powder still once I placed into resin the colour will get change

[@art_incarnation_]

Hey , you can dry the flowers with the help of direct sunlight for a few days ...and you can press them too...but you need to press it for around 8 to 10 days...same goes with silica gel..

[@nikitashanbhag4630]

@@art_incarnation_ 😊will try . Thank you so much

[@AbbaPhotoFrames]

Good

[@art_incarnation_]

@@AbbaPhotoFrames thank you ✨

[@SoniaDadi-rz4tb]

I have gold pigment can we use that for the edges. Instead of market?

[@art_incarnation_]

You can mix it with a binder..and then apply it...

[@sanjanasartofdance3798]

The last coat raisen only using raisen or hardner too ?

[@art_incarnation_]

@@sanjanasartofdance3798always use resin and hardener mixed...in proper proportion...only using resin won't cure

[@tashusartz5981]

So beautiful i want to ask how to seal the photo before putting in resin 😊... It got wet from side when i use to put photo in resin

[@art_incarnation_]

First colour print or photo print the photo and then laminate it and cut

[@tashusartz5981]

Mam laminate kis se krna hai

[@art_incarnation_]

@@tashusartz5981 printing shop Mai jakar laminate karne keliye boldo...vo kar denge

[@kavi_resin_world]

You explained really well in a very simple way....just wanted to confirm for the date and name you just took normal print out and then laminate that...right??? Or are these customised stickers???

[@art_incarnation_]

Hey tysm!🩷And yes l took a normal print out & then laminated it ...it is not a customised sticker ...hope this helps 😊

[@bipashadas4102]

How do you laminate the photos..and what marker are you using

[@art_incarnation_]

In any printing shop you will get lamination available...and I'm using a resin decor marker

[@Nandita_s_adventure]

From where did you buy the wooden stands?

[@art_incarnation_]

@@Nandita_s_adventure I purchased it from local art and craft store

[@shairaparkar7535]

Dear what will happen If I directly use passport size cutout photos for keychains? Is it necessary to laminate b4 pouring resin on it?

[@art_incarnation_]

If you do not laminate it then the photo will completely get submerged in resin .. That's why it is important to laminate the photo which helps to seal the photo & protects it from resin..Hope this helps 😊

[@shairaparkar7535]

What to use for lamination photos

[@art_incarnation_]

@@shairaparkar7535 you can go to a normal printing shop & tell them to laminate the photo

[@piyushiaggarwal3274]

Lamination visible ni hota?

[@art_incarnation_]

@@piyushiaggarwal3274 aapne agar sirf text laminate Kiya ho toh ha hota hai thoda visible par maine yahapar aur bhi kuch print kiye hai A4 size paper par aur fir cut Kiya hai..so isliye visible nahi hai lamination.

[@dr.ravalirao5485]

Hi , how to make laminated pictures..?

[@art_incarnation_]

You can go to any printing shop and tell them to colour print & laminate the picture

[@nagalakshmicherivirala9329]

Wanna try while seeing ur video 😊😊nd u explained it very well nd can I know were u bought those items nd can u mention where can we find

[@art_incarnation_]

Thank you!🤍 Glad you understood it...l have already mentioned all the links of the products in the description of the video..so plz check that...Hope this helps 😊

[@nagalakshmicherivirala9329]

​@@art_incarnation_thq so much 😊😊

[@sonamagarwal5150]

Verry good explain plz same more thing explain

[@art_incarnation_]

Thank you 😊..l will surely upload more videos related to resin art ..so stay tuned for that..

[@samiyaakther1362]

can you please tell me the size of mould you use in this video.?

[@art_incarnation_]

The heart mould is of 6 inches & the circle agate mould is for 5 inches

[@mehjabinshaikh2306]

Its compulsory to measure in ratio 3:1, is this ok with then use in ratio 2:1

[@art_incarnation_]

You need to measure properly even if it is not 3:1 ratio resin...and for casting 3:1 resin is preferred to use whereas for coating 2:1 resin is used mostly..

[@nishamahrouf5777]

❤❤❤❤

[@art_incarnation_]

Tysm❤️

[@Kirti_samriddhi.]

Can't I use some spoons or any container to measure the amount instead of the weighing machine?

[@art_incarnation_]

It is advisable not to... because if you don't get proper measurement the resin won't cure properly that's why the weighing scale is important

[@Kirti_samriddhi.]

@@art_incarnation_ there is a resin and hardener available online...which is 100:50 ml amount....if I'll pour the total then will it work ....

[@art_incarnation_]

@@Kirti_samriddhi.Pour according to the ratio..don't mix directly a lot of amt of resin & hardener

[@Bikerzzone]

Which photo I used laminated or normal

[@art_incarnation_]

Laminated photo

[@SnehasKitchenHub]

Which paper picture you take ? I made resin photo frame but as i put the photo in it it's colour get fade Reply please

[@art_incarnation_]

Hey hi ...l actually take a photo paper print and then cut it & then laminate it . Lamination is very important otherwise it will fade.

[@sushmacherukuri2169]

How to make hole on bigger heart resin frame

[@art_incarnation_]

You can drill it with an electric drilling machine

[@nibeditascraftingart8641]

Which paper of the photos?

[@art_incarnation_]

You can use photo paper for better quality photos & then cut & laminate them. Hope this helps😊

[@archanatammana829]

From where u got those wooden frames

[@art_incarnation_]

I have purchased these wooden easel stand from a local art store ..you can also get these on Amazon

[@abiramukherjee80]

How u preserve the leftover rose petals

[@art_incarnation_]

You can preserve it in smaller moulds

[@ishanippuja6416]

What is the size of heart shape mould

[@art_incarnation_]

The size of the heart shape mould is 6"

[@Sheenu27]

If i dont have weighing machine, then how can i measure??3:1 ratio

[@art_incarnation_]

You can take a transparent cup and mark on it with the help of a marker and take the resin till the marked sign 3 times and with the same measurement take the hardener... however it is possible it won't work since it is not precise.... preferably try to use a weighing machine only...

[@sidhibajaj6617]

Did you use the photo in A4 paper or you have laminated it?

[@art_incarnation_]

First l took a colour print & then l laminated it

[@Gitanjalimhatre]

Hi 4:1 kese use kare Matlab 4:1 me resin or hardener Kitna gm le

[@art_incarnation_]

Agar 100 gms total hoga toh 4:1 ratio Mai 80 gms resin aur 20 gms Hardener lijiye ...4 parts resin ka hai and 1 part hardener ka hoga..

[@user-hc7xf6zi4u]

Those names and dates, is that normal paper print out or is that of any other material? Please reply

[@art_incarnation_]

These photo prints and text prints are of photo paper and then l cut them and laminate it

[@creativeshizakhan5509]

Assalamualaikum ap golden sticker khaha sy buy krtin hain

[@art_incarnation_]

Ji mai Instagram ke online stores se buy karti hu... Tulsi resin, kraftymall etc.☺️

[@RDARTGALLERY]

What is the size of agate mould

[@art_incarnation_]

5 inches

[@Reka0112]

Hai... How to find measurement of different mold?

[@art_incarnation_]

Usually when you buy moulds from any website you can see the sizes in the description itself ..if not...you can take a normal measuring scale...and measure it in cms & then convert it in inches..Hope this helps 😊

[@Artby-zilly]

Second layer just rsin ki hoti ha ?? Or mix mixture?

[@art_incarnation_]

Resin & Hardener mix karke..

[@makeinindia8649]

Mam apka resin ita ptla kese h mera to mix krte h gadha ho jata h n bubble b ate h also please tel me the quality of resin and hardner for 8inch coaster

[@art_incarnation_]

Aap high viscosity wala use kar rahe hoge resin....low viscosity resin aate hai..matlab patla resin rehta hai vo ...you can use that..aap coaster keliye 3:1 ratio resin use kar sakte ho...and to pop the bubbles...use alcohol spray also known as resin bubble buster spray.

[@snikitasahu1046]

While adding the photo,the corners are little up...not dipping fully.can u tell me where may b the fault is..and plz suggest how to take proper amount of mixture

[@art_incarnation_]

Yes this is because the density of the photo is less than the resin...so make sure to work in layers...let the first layer of resin dry and then once it is dry....put some glue and stick the photo on the first layer of resin. ..this will make sure that the photo won't rise up...and regarding the mixture...use a weighing scale for proper measurement...and take proper proportion...

[@snikitasahu1046]

​@@art_incarnation_thank you.can u tell me the actual ratio for photo frame 3:1 or 2:1 and one more thing for lettering which sheet is preferable...plz suggest from where u r buying this ...

[@art_incarnation_]

@@snikitasahu1046 3:1 is more preferable if the photoframe is little bit deep but 2:1 also works fine....and l get the printout form local print shop only...and for the sheet ..for better quality you can use photo paper colour print & then laminate it..

[@nishamahrouf5777]

Which types photos putting resin

[@art_incarnation_]

The photos are colour printed & laminated

[@shopping_karo_1419]

Which paper is used for the photo

[@art_incarnation_]

Normal colour print which is laminated

[@sagarikadey9261]

If I make a photo frame of 8 inches then how to take the size measurement of the photo if I have to add two or more photos there?

[@art_incarnation_]

I usually experiment with different sizes of photos on an A4 sheet by editing it ..even l dont take proper measurement...but I think you can also try to use 'Word' to resize the image in a blank document & then print it out....l once tried this method & it worked for me...hope this helps✨

[@art_incarnation_]

Or you can also go to a printing shop & ask them directly to give the photo of the required size...since it is an 8 inches frame ..and you want 2 photos minimum so I guess 4 to 5 inches photo will work...bt ratger than telling them the size...I prefer taking the mould with me & telling the printing shop what size l require..mostly they would know..and even if you printed them of wrong size..you can also check it on the spot that it fits or not if you have the mould...so you can again edit it precisely...tgts why at first never laminate your photo to avoid extra cost..always first check after the colour photo print...& then laminate it...thats how l usually work....

[@sagarikadey9261]

Thank you so much for guiding me ❤❤

[@art_incarnation_]

@@sagarikadey9261 yeah welcome ✨❤️

[@Kaavyagayathri]

How would u know how much resin mixture to be used for different moulds

[@art_incarnation_]

I learned it from experience...you can use resin calculator...on google too

[@miho_abueva]

​@@art_incarnation_ How did you you divide the 80 gms into 60 gms resin & 20 gms hardener? in the first frame.

[@art_incarnation_]

@@miho_abueva The resin that l worked with was of 3:1 ratio . Total l took 80 gms , so according to the 3:1 ratio it will be 3 parts of resin i.e 60 gms of resin & 20 gms of hardener.

[@miho_abueva]

@@art_incarnation_ oh thanks. How to know what ratio to use in the mold?

[@art_incarnation_]

@@miho_abueva For casting in a mould use 3:1 ratio resin & for coating use 2:1 ratio

[@talentadda9515]

What is the lenth of that mould in inches plz...?

[@art_incarnation_]

The heart mould is of 6 inches & the agate circle mould is of 5 inches

[@Kavitamane212]

Mam..How much inch the heart shape mould is

[@art_incarnation_]

Heart mould is of 6 inches

[@syedizan3012]

Resign or hardened jb buy krna hu tu un me se ksi pr ratio 2:1or ksi pr 1:1lkhi huti he already.plz is ka kuch explain krein k hm in me se koi bhi lei ratio apne project k hsab se rkhe ge?jse 3:1 ap k project me.ya ju un k upr mention huta k 1:1or 2:1.thanks

[@art_incarnation_]

Maine 3:1 ratio use Kiya hai ...kyuki vo casting keliye use hota hai ...aap 1:1 bhi use kar sakte ho...par 2:1 ratio jab coating matlab kuch upar se cover karne keliye mdf board var vagare dalte hai...aur casting matlav silicone Moulds Mai dalne keliye use karte hai ..

[@pratibhasrivastava8801]

Hi, can we cover artificial jewellery with resin

[@art_incarnation_]

Yes you can use it ...but you need to prepare the artificial jewellery first ..prepare means you have to take measures so that any kind of chemical reaction is avoided between the resin and the artificial jewellery..

[@_ShwetaSawant_]

Is it compulsory to take 3:1 ratio only?

[@art_incarnation_]

3:1 ratio is basically made for resin which is meant to be pour in moulds....i.e for casting...so it is preferable to use 3:1 ratio resin for casting..you can also .... sometimes use 2:1 ratio ...bt not for very deep casting...2:1 ratio is usually just for coating..so use 3:1 ratio for casting (i.e in silicon moulds or bezels and all) and use 2:1 ratio for coating (i.e for upper coat or to pour on top of mdf and all)... Hope this helps 😊

[@shovanabajracharya]

There is 1:1 also. It also works well with molds.

[@art_incarnation_]

@@shovanabajracharya I have never personally tried 1:1 ratio bt yes it does work 👍

[@bindukomalikotha638]

Where do get the photo frame stand......... and the text in side the resin.....

[@art_incarnation_]

The photoframe stand you can get it in any local art store or you can order it online from Amazon or any other website...and the text is printed & laminated..l edited the text myself

[@bindukomalikotha638]

@@art_incarnation_ ok thanks for response 🥰

[@bindukomalikotha638]

If you got any of them from Amazon or from website can please provide a link in the description or in comment box 🎁

[@art_incarnation_]

​@@bindukomalikotha638 yes sure...(easel stand link) tulsiresin.com/products/6-easel-stand?_pos=4&_sid=1f3e5da42&_ss=r

[@rangchitra2613]

What is the depth of this mould

[@art_incarnation_]

The heart mould depth is 8mm and the depth of agate Circle mould is 6mm

[@charmipatel5417]

Ham konsa pohto le sakte hai esmey

[@art_incarnation_]

Aap normal colour print le sakte ho ya fir photo paper aata hai....vo le sakte ho

[@sunitimehrotra7584]

Can we use fresh flowers

[@art_incarnation_]

No you cannot use fresh flowers..you need to dry the fresh flowers completely to get rid of the moisture..so that it doesn't change the colour in resin

[@nainamalhotra1808]

Photo kaisi Lani hai humen laminated or normal sasti Wali b chl jaygi

[@art_incarnation_]

Photo paper par photo and lamination karna hai

[@saumytheeditior3038]

Photo ko lamination karna jaruri he ya direct mold me rakhna he

[@art_incarnation_]

Laminate karna jaruri hai

[@gurmitlamba205]

How do you prepare the names/ any other written matter?

[@art_incarnation_]

I edit the written text on canva and then l take the colour print & laminate it ...and after that put it in the resin artwork..Hope this helps 😊

[@divyasenthil1486]

@@art_incarnation_hi.. What app you are using for those text editing work

[@divyasenthil1486]

@@art_incarnation_ what's the process of Editing the text n printouts

[@art_incarnation_]

@@divyasenthil1486 I personally use canva app

[@art_incarnation_]

@@divyasenthil1486 just edit it in canva app on A4 document.. whatever you want to add text or photos and then print it

[@mass5714]

Hi sister...what kind of photo are you using

[@art_incarnation_]

Hii..dear..l am using normal colour print out which is laminated..Hope this helps 😊

[@artistic_pawss]

Circle mould size ?!

[@art_incarnation_]

@@artistic_pawss The size of the circle mould is 5"

[@RekhaPrem-cw5zh]

Can I know the ratio of resin and hardner

[@art_incarnation_]

Hi...it's 3:1 ratio resin & hardener

[@lilianalpz302]

Do you need a heat gun for this?

[@art_incarnation_]

No ..you don't need a heatgun

[@divyahumad8451]

Which type of photo did you use ?

[@art_incarnation_]

I used normal colour print with lamination

[@rangchitra2613]

Hi.. can anyone clear one doubt???.. photo and stickers has to be laminated.. ?

[@art_incarnation_]

Yes ..it has to be laminated... otherwise it will be soaked with resin..

[@skinaura5141]

Hi, pls tell me photo that u use is normal photo ya something else,bcs when I use photo in resin and pour the resin the photo is going wet,what did i do

[@art_incarnation_]

You need to laminate the normal photo otherwise it will become wet

[@sabadhshaiju6910]

What type of photo sheet is that

[@art_incarnation_]

It is colour print with lamination

[@CraftzByDefender]

How to hang this frame

[@art_incarnation_]

We can add a hook to the frame to hang it....but mostly we provide a wooden easel stand for the frame to display

[@aishubalaji1563]

By making photo frame We have to do laminate r not

[@art_incarnation_]

We have to laminate the photo

[@Walldecors_cum_gifts]

What quality photo should we use

[@art_incarnation_]

You can go with the photo print and laminate it

[@shaanupommi1771]

How to fix rate??

[@art_incarnation_]

You can fix rate ...by measuring the resin you use ..as well as the amt of raw materials you use in your products... like pigments or any photo, text, any kind of embellishments.etc. and also make sure to add cost for your time and efforts too...but incase if you are a very new artist then you can keep your selling price comparatively low (i.e you will compromise on the cost of your time and efforts) and eventually when you build your community you can slowly increase the price to the extent where you feel is enough..since that's when the value for your products will increase.. not only this...you can also...check on your competitors (who are of your level ) prices so that you will get a basic idea abt the prices in the market..and decide accordingly to that...Hope this helps😊😊

[@shaanupommi1771]

@@art_incarnation_ thnku soo much❤️

[@user-mu3we8ll7w]

Nas❤❤❤❤

[@art_incarnation_]

@@user-mu3we8ll7w thank you so much ✨

[@pritharoy9526]

How to dry the frame?

[@art_incarnation_]

If you mix the resin & hardener properly then just leave it for 24 hrs ..it will cure.... completely...

[@zainabsendu8197]

What kind of sketch u use ??

[@art_incarnation_]

I didn't use any kind of sketch. This is a photo. Hope this helps 😊

[@zainabsendu8197]

@@art_incarnation_ at the end for border what u have use ??

[@art_incarnation_]

​@@zainabsendu8197 At the end for border? At the end l uploaded a vertical video due to which the remaining video part was covered in black...

[@s.diveshbaradia2441]

Second layer not needed?

[@art_incarnation_]

No not needed

[@cuteriya1404]

Photo side se alag colour ki ho gyi bheegne ki wjh se. How to cure that.

[@art_incarnation_]

You can cover it with flakes....and fir..next time se..pehle print nikalna...photo cut karna and then laminate karke firse cut karna photo...so that baadme bheeg nahi jayega

[@Stanger268]

You laminate tha photo before put it in resin please reply???

[@art_incarnation_]

Yes ...I laminated the photo before putting it in resin

[@shwetasartland2775]

Mam ap sell bhi karte ho

[@art_incarnation_]

Ji haa...Mai bhi sell karti hu...resin frame, resin keychain vagare...aap mere Instagram account PE mujhe message kar sakte ho ...order keliye..[Instagram account: art_incarnation_] Instagram link- instagram.com/art_incarnation_?igshid=ZDc4ODBmNjlmNQ%3D%3D

[@jasmineparekh2566]

Superb do send list of material

[@art_incarnation_]

I have mentioned all the materials & material links in the description.. kindly check it..

[@sunainavy9427]

When I resin the flower becomes blue color. Why is that happening?plz rply

[@art_incarnation_]

This happens when there is still moisture left in the flower.. before putting the flowers in resin make sure to dry the flowers completely..you can dey the flowers with the help of silica gel for 8 to 10 days or keep it in the book for 8 to 10 days...

[@user-ji8gb9cy2h]

Where can we get materials

[@art_incarnation_]

I have provided all the links in the description, you can check them. Also you can get all these materials in any resin art online store...& maybe also in your local art stores.

[@rajalakshmivk5353]

Can we measure without weight machine sister ??!

[@art_incarnation_]

No...like for a small quantity maybe it's ok...but not for frames and other large resin products...it is not advisable to do so...l have never tried without a weighing machine

[@deepthi74]

How many inches... Silicon Moulds ..!

[@art_incarnation_]

The heart mould is of 6 inches & the agate circle mould is of 5 inches

[@shanmugapriya9789]

Where you buy the material mam

[@art_incarnation_]

I buy all the materials from online stores on Instagram. I have also mentioned the links of the products in the description, kindly check them.

[@renusolanki2071]

Mene b try kra but complete dry hone ke baad jb unmould kr to frame loss soft sa bna . Kya aap bta skte h proper kaise bnega

[@art_incarnation_]

Maybe soft bana ho coz apne pura time cure nahi Diya hoga ..achese 24 hrs cure home dijiye ..agar tabhi bhi nahi hua..toh resin proportion Mai kuch problem aya hoga ...no worries ...start mai hote hai problems...aap practice kijiye ..ho jaeyga..😊

[@meenakshisharma3841]

4,5 inc module me kitna resin lgta hai

[@art_incarnation_]

Aap calculate kar sakte ho....resin calculator....par....approx 80 to 100 gms ke around lag sakta hai

[@Stanger268]

What is the pen name please reply by which you paint

[@art_incarnation_]

It is a resin art marker ...you can get this pen in resin online stores..

[@Stanger268]

@@art_incarnation_ may u provide link please 🥺

[@art_incarnation_]

@@Stanger268 Yeah sure😊 This is the link for the resin marker tulsiresin.com/products/golden-resin-marker?_pos=2&_sid=0ca78cf26&_ss=r

[@kamysane2954]

Hi the way you are explaining is very nice . Sometimes the photo comes up in the resin . How can we avoid that

[@art_incarnation_]

For this problem, you can work in 2 layers...after the first layer is dried, you can stick the photo with some glue..and then pour the second layer on top of it ..to avoid the photo coming up..

[@kamysane2954]

Thank u so much . I appreciate your response

[@kamysane2954]

Which glue to be used

[@art_incarnation_]

@@kamysane2954 You can use fevicol

[@kamysane2954]

Also wanted to ask u sometimes when I make a pattern with different Colors and then leave it , after sometime all the Color’s get mixed . How to avoid that

[@jayatara1151]

Did you laminate the photo?

[@art_incarnation_]

Yes l did

[@boomboomshakalaka8572]

How to fixing for price

[@art_incarnation_]

You can fix the price by calculating material cost & then adding your profit as per your time, labour & experience..

[@radhabainavalagund]

Hi this resin photoframe is flexible.......?

[@art_incarnation_]

Hello..no the resin photo frame is not flexible...it will be only flexible when the resin and hardener is not mixed properly or if the resin proportion is not proper... otherwise it will be not flexible

[@anuprekshajain7606]

How to add text like this

[@art_incarnation_]

You can edit the text in any editing app. I personally used Canva app & then you can colour print it & laminate the text.

[@krishnarawat66]

Ye saman kaha milega

[@art_incarnation_]

Sab links de di hai description Mai..aap check kar lo vo links products ke liye..online store ..ke links hai

[@khushbooshaikh9992]

Nameplate pr name hote hai golden me waisa pura naam frem me likhna ho to kaise kare?? Waise name kaise costumise kare??

[@art_incarnation_]

Online stores jo hote hai vo customize karke dete hai...

[@sheela9225]

Hi mam.whr u got that names and date

[@art_incarnation_]

I edited the name and date in Canva app and then l printed them in colour print & laminated it. Hope this helps 😊