Resin Rainbow Letter Keychain | Geode inspired | Glitters on Resin | Tutorial |Philippines

[@tracymark9173]

VERY PRETTY. WELL DONE. LOVE IT. ❤️

[@grisselle1972]

Beautiful job and message🌝

[@marfmoralita5041]

Thank you for your kind words 😊

[@jjamjjang4629]

Baby Marf, nice kaayo.😍 Daebak!

[@marfmoralita5041]

Thank you, Jam ❤️

[@WilhelminaSnyman]

Thanks for sharing. This is really very beautiful

[@cathynavarez5100]

Wow nice❤❤

[@asiabibi1100]

very nice tutorial

[@marfmoralita5041]

Thank you 💕

[@carlottawinters6124]

What a beautiful keychain, and well put together tutorial. Thanks so much for sharing!

[@marfmoralita5041]

Thank you for your kind words ❤️ It encourages me to keep on ❤️

[@SuperBrowndog1]

Very pretty 🤩

[@marfmoralita5041]

Thank you so much

[@suegore5929]

It's great when others realize the reason for the rainbow, too!!!

[@marfmoralita5041]

Yes 👌❤️

[@lovice43]

Great video, beautiful 💯thanks

[@marfmoralita5041]

Thank you for watching! ♥️

[@jostulove]

Gorgeous ❤

[@marfmoralita5041]

Thank you! 😊

[@nenascakeshomemadegoods6127]

That was very pretty 🤩 I really like that u took the time to explain & pause people these days want to make videos in a rush & expect others to learn 🤦🏼‍♀️ keep up the AWSOME video 👍🏼🙏🏽💕

[@marfmoralita5041]

Thank you so much for this❤️ I was quite worried that people will only get bored because I paused the vid quite a lot of times. You encouraged me to keep on. Thanks ❤️

[@aliyakeller2573]

Beautiful ❤

[@marfmoralita5041]

Thank you so much ❤️

[@suegore5929]

Very well done video, thank you!

[@marfmoralita5041]

Thank you too for supporting ❤️

[@fedrasdesigns7]

I love it ❤

[@marfmoralita5041]

Thank you! Hope you try it too!

[@kristinecrafts]

Iba talaga yung dating pag unique ang design 😍 nice artwork 💕

[@marfmoralita5041]

Thank you po, ma'am 💕

[@bucoysworld7051]

Nice artwork❤️

[@marfmoralita5041]

Thank you, ma'am 💕

[@oyvonnee]

well done! You have much more patience than me - beautiful work!

[@marfmoralita5041]

It does take quite some time, but it helps me take my mind off things. 😊 Thank you for watching 😊

[@ThisOLmaan]

thas very cool, but really Nice thank you for the idea I'll make sure if I did a very similar project I'll direct them to ur KZbin ch. if is ok with you, but I'll still credit you .

[@marfmoralita5041]

Sure! Let me know if you make one.. I'd be excited to see them ❤️

[@ThisOLmaan]

@@marfmoralita5041 👍🏼

[@monicamanzilla4572]

Bellísimo trabajo ! Por favor enséñanos ! Te deseo una muy bendecida vida !

[@marfmoralita5041]

Muchas gracias ❤️

[@marcholkids6761]

Wow!

[@genesiagomes3068]

Amando vê,vou comprar minha resina e tentar fazer😊

[@jhandicrafts8277]

Hello po.. Mag start din po Ako nito hehe Sana mapasyalan nyo din me ,😍

[@marfmoralita5041]

Subscribed and watched your vids po 😊

[@carolstewart1704]

Gorgeous!! Love it!🥰 Rly dig all the tips and things u edit in for us too!❤️

[@marfmoralita5041]

Awwee thanks for your kind words. Enjoy crafting 💕

[@saintlizabethmacasarte4796]

amazing!!!🥰🥰🥰🥰

[@marfmoralita5041]

Thank you, ma'am Beth ❤️❤️❤️

[@denisealbuquerque852]

Maravilhoso!👏👏👏❤️🥰

[@marfmoralita5041]

Thank you so much!

[@Laurenjoinsyoutube]

Won’t that mean the other side is plain black ? And if it’s a letter that’s backward in the mold like the L then the front is plain?

[@marfmoralita5041]

Hi! If the letter that you're doing is facing backwards, you can make a black base first, demold, then do the rest of the steps so that the rainbow design is at the right side :) you can also do it on a non-inverted mold so you can follow the video :) hope this helps :)

[@jamesbarlowjr.3762]

Very Cool! I Love It! Can I Ask Where You Found The Large Key? Thanks!

[@marfmoralita5041]

Thank you! I bought all of my materials through an online store here in the Philippines called shopee. Not sure if it's available in your country though

[@jamesbarlowjr.3762]

@@marfmoralita5041 Awe ok. Thanks Sweetheart! I’ll have to see what I can find. 😊

[@claudineriduet3805]

❤❤❤❤❤❤

[@daryllyshapiamonte4941]

New subscriber 💕🥺 Thankyou so much

[@marfmoralita5041]

Thank you too. Keep posted.. will be posting more about resin soon ❤️

[@naniii2808]

GO SIS! I'M YOUR NO1 CRITIC

[@marfmoralita5041]

Thanks, baby bro!

[@mariisabelvillalba6388]

Hermoso...como se hacen las letras K o la letra L?

[@marfmoralita5041]

Hi! You can do the process in reverse or make through an mold that is not inverted 😊

[@anandhichajjed]

Ty soooo much

[@marfmoralita5041]

Your welcome. Thank you for your comment ☺️

[@bucoysworld7051]

wow marf dami ng viewers mo, keep it up!

[@marfmoralita5041]

Thank you, ma'am, for helping out and encouraging me 💕

[@ivonepereira4806]

When you added the glitter was the black letter resin dry? Is that why you added clear resin on top? Thanks

[@marfmoralita5041]

Hi! It was already quite solid at the time, but not yet fully cured. I did this because if it was still liquidy, the glitters might all sink to the bottom :) the reason I placed the clear is to hold on to the glitters so that they won't move much. :)

[@rholmes9]

Thank you for this! Would you just reverse the process for the backwards facing letters, like L and K?

[@marfmoralita5041]

Hi! I really want to try out the process for the inverted mold too. Sadly, I ran out of resin and am still waiting for it to arrive.. It can be tricky to do it in an inverted mold, but a trick you can do is to make the black letter base, let it cure, place the glitters, and then dome :)

[@marfmoralita5041]

Also, I believe doing the process in reverse will work too 😊

[@lisacapers2181]

OMG, so beautiful can you list your supplies you used pls. Can you add subtitles so I can learn. Thanks Lisa 😊 from USA Oakland , CA

[@marfmoralita5041]

Hi! Thanks for watching. Stuff that I used are: Slow curing resin Toothpicks Red, gold, green, blue and violet glitters Letter mold Black Mica powder. That's all :) Also, I can't add subtitles since I'm not speaking, but there are text bubbles everytime I do something. 😊

[@marfmoralita5041]

Also, additional stuff are the ff.: Eye screw pin Jump ring Keychain Key charm :)

[@FeistyAngel]

Hi Lisa! I'm your neighbor from Martinez (just North of Berkeley & Walnut Creek). Small world😉😄🥰 Marf, Great video, thanks for posting! I can't wait to try this technique out!🥰

[@marfmoralita5041]

That's awesome that you're near each other. Thanks for your kind words!

[@comisiontv2973]

Ganda po anu po gamit nyo apps para full ung videos anong app editor po thanks🥰

[@marfmoralita5041]

Hi po! Sorry just checked the comments... Capcut po gamit ko. Madali lang kasi siya gamitin, especially cp lang gamit ko :)

[@saboorahali497]

Which thing uh have to pour mica powder n quantity of resin

[@marfmoralita5041]

Hi! You don't have to put in a lot of mica powder because a small amount can go a long way... :)

[@rivnard3571]

Hey! Love the way these look! Do you give permission for people to use this technique and sell the keychains/jewelry? I want to make something similar, but I want to make sure it’s okay with you first.

[@marfmoralita5041]

Sure! That won't be a problem for me as I learned from other resin artists too😊 Glad to be of help in your resin journey. On the other hand, I hope you can subscribe, click the notification bell and like my videos... It'll be very encouraging on my part ❤️ Happy crafting :)

[@SED98881]

' What size. Are your eye hooks/jump rings

[@marfmoralita5041]

Hi! I'm sorry. I'm quite unsure as they came with a resin kit

[@malakaziz3642]

Gorgeous work 😍 one question though .. can I use mod poge instead resin ?

[@marfmoralita5041]

Thank you! Personally, I haven't tried mod podge in resin yet, but I do want to try it soon. However, I saw tons of videos with mod podge and they all say that it's not visible in resin. So, I believe it'll work.. :)

[@malakaziz3642]

@@marfmoralita5041 i have used mod podge 2 layer to Seal a picture in resin and worked perfectly fine .. I think using mod podge will be faster then 3 layer of resin .. i will try the mod podge method and tell you if it work 🤞🏻.. thank you for the amazing tutorial

[@malakaziz3642]

Sorry for my English If there is any mistake 😓

[@marfmoralita5041]

Wow excited to know... I do wish that mod podge was readily available in my place, but it isn't... I do believe it'll take lesser time than doing 3 layers of resin 😅

[@marfmoralita5041]

No worries about mistakes. As I always say, FAIL simply means First Attempt In Learning :) Let's continue making mistakes and learning from them ❤️

[@subhashbhagwat2032]

Razin and epoxy persent tel me

[@asiabibi1100]

what is purpose of doming

[@marfmoralita5041]

Hi! Doming creates a rounded look to your piece that somewhat gives it a 3D-like look. It also gives a better visual impression as it gives the piece a magnifying effect. 😊

[@AzulMariecreations]

7 days just doing one letter? That’s a lot! Why not make them all. I have don’t all of them in one day. You make the design and the colores and if you want them done fast you use the 10 minute resin it cures in white.

[@marfmoralita5041]

Hi! This is slow curing resin that's why it took some time, but you can use fast curing/UV for faster production. Also, I only did one since it was for tutorial purposes and I didn't want to use up my resin to make a bunch that wasn't ordered. Hope this answers your question 😊

[@AzulMariecreations]

@@marfmoralita5041 oh okay. The resin I use cures en 12 to 24 hours. I don’t like using uv resin a lot because I’m having a hard time curing it. Don’t know why! Btw I love your videos

[@marfmoralita5041]

That's the fast-curing one.. Will be trying it next ☺️ UV resin is okay for pendants and tiny stuff.. Did you use the UV lamp to cure them?

[@AzulMariecreations]

@@marfmoralita5041 yes I have two and UV flash light. I only use it to glue in bales in the back and for the tiny clear molds

[@bibiannnedimma2211]

Beautiful ❤❤❤

[@cathynavarez5100]

I love it❤❤

[@SED98881]

' What size. Are your eye hooks/jump rings

[@marfmoralita5041]

Hi! I actually am not sure about the size of the hooks as they came in a set and the jump rings are only of one size in my place.