Resin Straight Joint WMB 24kV 3Cx240mm2 Cellpack

[@meromusic6004]

Why im watching this?

[@tokabee1939]

😂.I was thinking the same.....😂

[@omid4861]

i was thinking the same

[@Thetreetroll]

is it a power line?

[@omid4861]

@@Thetreetroll no , its for internet

[@resetcoder]

Because its important

[@IllSkillz]

if you can't fix something with a tape, it means your not using enough tape

[@FabFunty]

Or simply the wrong tape, there's the right tape for everybody in every situation 😂

[@shantaramkashid7064]

55555 5 55 55 55 55 55 5555555555 for 5girls 55 5inches 55 5555inches 5555555 5 5 555inches t5555 555th grade 5 5 555 5AM and 555 5 5 555 5555 5 5555

[@Idioot1337]

you're* not your

[@sarveshnaidu7362]

I'm satisfied that he has neatly completed the job

[@kellymoses8566]

That joint should last hundreds of years.

[@koblyha]

That was a lot of tapes :)

[@sashaborkin]

This is not a coupling so this is a taping set)

[@muhammedkabeerkabeercochin3639]

Supper Cable jointing Supper insulating and good finishing Congratulations

[@geo00769]

youtubes video recommendations gets weirder and weirder... and here I am watching every thing.

[@4gbmeans4gb61]

yes WHY did i watch the WHOLE thing is what im wondering

[@thechtracker496]

Same thing man.

[@ShainAndrews]

So what shall we watch next?

[@miqotelover]

Well it was kind'a fascinating to watch no? Now you know how to do the job if you ever find yourself in the position.

[@cocosloan3748]

The robots fuck with us and having a laugh!

[@bulmear2531]

I have an exam tomorrow, and this is how I waste my time

[@NDahlonline]

if you fail your exams the skills you learn from this video might come in handy on the factory floor. Good luck though, stay in school.

[@AviAero123]

Well how was your exam then? 😂🤗

[@leonardslaninka5599]

shit, i though that i am the only one doing that :D

[@mccc4559]

My lady waits while I must finish this video. What's wrong with me?

[@Attexi]

I have one today, but no one cares =))

[@samthornley]

Thanks, now I can repair my iPad charger.

[@mikeunivers]

You will need more tape

[@miqotelover]

Well said.

[@alexeikanzir4020]

В условиях стенда выглядит красиво, а теперь сделайте то-же самое посреди поля, в яме на половину заполненной водой и грязью, во время дождя с сильным ветром, пальцами которые от холода почти не шевелятся.

[@Stas6360]

палатку поставят

[@tunguyenanh7063]

Thật sự kính nể bác nào nghĩ ra đc cách làm này! Vài thế kỷ chắc cũng ko bao giờ bật ra đc mối ghép nối 😱😱😱

[@HadenAK]

i will never have to do this but now i know how. totally worth the 18 minutes of my life

[@k0yzerz]

This guy is going to wrap my christmas presents from now on

[@XXxMakDeeZiLxXX]

Yeah..Unfortunately, it might take you up till summer to open up all you presents... :-)

[@janfejt3428]

...and then you remember you forgot to put the cover sleeve on first

[@SeaShrimp]

oh no, dont say it, i have done it too many times with the rubber sleeves when soldering XD

[@Krautmaster86]

i guess I should switch over to the A380 landing guide, my change is higher to get into that situation than extending some 24kv cables.

[@resetcoder]

Very difficult way to make a joint. In my time we just used Rizla.

[@xcruell]

hahahaahahah :D

[@realedna]

I followed the instructions, but now I'm out of tape! Help, I need more tape!! And it's starting to rain... :-(

[@originalusernamefail]

Set up a tent👍

[@james1234168]

This is how I feel when I'm plugging in a few extra devices behind the TV.

[@imtiaztahira2941]

Store: How much tape do you need? This cable guy: yes

[@Automationacademytv]

thanks for nice video my channel starts to grow, it inspired me to make more video

[@peetre]

WOW! My arms will be strong after a couple of those jobs!

[@Mike_5]

4:12 Gets the worlds largest comedy scissors out

[@CSJiGSaW08]

For all you dumb people and non electrical engineers or electrician, the 3M video some people are stating that has a faster repair is not even the same cable. This one has different shielding, different layers, different thickness. This to me appears to be properly done and went above and beyond to make a resin outer shield.

[@ActionHeinz]

Exactly the video I was looking for... how to splice 24kV cables...

[@bigredc222]

At 9:55 he left some of the connector exposed when wrapping the first layer of semiconductor tape over the first splice.

[@mohammedomer3798]

Nice catch.

[@UltraPro4u]

Next time I will use this wire for wiring in my house😎

[@matcap2010]

lol

[@debasishroutray978]

I was searching for tips to repair the charging cable of my Samsung mobile..... Now I can do it😆😆😆

[@ramosel]

Don't know why this was in my view, but it was quite fascinating.

[@blagoev3491]

It's called millimeter, not 'MM". And these things you called semiconductors, they are insulators!

[@xcruell]

THANK YOU

[@justinc.8191]

Yea Mate, I was freaking out where he started saying "M M"

[@johnw5403]

That's one helluva sound system hes hooking up LOL😁😁

[@kellymoses8566]

I love how they tell you that this should be done by a competent person LOL

[@geoffreyward4743]

i can't believe they are not crimping the conductors together with hydraulic hand crimpers.4 bolts on each connection looks like technology from the past.

[@berendlucasvanderweide]

24kv cellpack, was hoping for an experiment with 6000 lithium ion cells strapped in series in the good name of science. Chapter 3 was long winded, wasn't it? These bolts snap off when proper torque is applied.

[@Den-ji6ys]

Если бы была синяя изолента, то ее не нужно было бы так толсто мотать.

[@AlekseyVladimirivich]

сука русские понабежали

[@ИгорьПонамеренко]

Отправьте им залетну синею ! Мучаются ребята 😂

[@Allin7days]

So this is what it takes to wire Gulliver's house for electricity.

[@pixelart5743]

Ya, this is your training video.... Real world -> Oh my gosh someone dug our wire up, get out there and fix it. Here's a shovel and wheelbarrow. We will send a tractor out when you are almost done with the hole. Oh don't forget that it is going to flash flood right about the time you are done digging. Good Luck! Oh just so you know, we had knucklehead from accounting turn off the power so you have nothing to worry about!

[@LeicaM11]

Thumbs up for writing Millimeter correctly as „mm“ :-) All other asians do that wrong

[@ekghostofficial]

Sooopr work. And soopr cable

[@yctsang6561]

Very good. Much better than reading the manual

[@balcer7]

OK thats a lot of work to do before you put cable in the ground..

[@williammorland3534]

All well and good jointing indoor. Try all that when there are pipes ducts and crap in the hole you’re working in. All that room and the cables are not straight and the joint is like a banana.

[@ALKUKES]

I guess he find it easy to say mm than millimetres

[@Cdubb_Official]

Is this what hooks up to the long and purple rubber thing in my moms drawer?

[@ngalethi1739]

TRÊN CẢ TUYỆT VỜI

[@giuseppegargiulo4220]

Li ho fatti della 3m ma questo giuntista è troppo bravo ❤

[@ryanmarshall8925]

I thought it was an edited picture in the thumb, small wire with a dude pasted behind it. NOPE BIG OLE CABLE

[@jamoin3829]

great lifehack, now i can charge my phone wherever i am

[@ЕвгенийЧПУ-ф5в]

А в конце такой: "Баалииин, термоусадочку забыл!"

[@GeneralZadrot]

или провода перепутал и не так соединил)

[@maxtrevor7638]

Ага, теперь попробуй тоже самое трудно доступном месте. Я посмотрел бы как они там по мучались бы

[@fa6151]

We did joints under heavy rain and trench full of water at same time. And energized successfully 😁. It takes skills and experience.

[@asbestosfiber]

But will it keep working for 20,or 30 or more years?

[@fa6151]

@@asbestosfiber Depends on the environment first, Jointer skills and finally the Joint quality its self.

[@bobbwc7011]

Congrats F A, you just doomed a very expensive asset to fail to reach its full economical life of 40-50 years. Especially on modern cables water ingress is the worst thing for the insulation and should be absolutely avoided. Before energizing you should also do a sheath test and a VLF test at three times operating voltage.

[@fa6151]

@@bobbwc7011 if no water comes inside. There won't be an issue. However, you have to consider the environment. For example our trenches (soil) is usually full of water since our country is basically an island. Therefore, Pilc joints live longer than Xlpe joints.

[@splendidpolo]

عربي يعبر عباب التعليقات. الشكر لمن شاهد وأعطى لايك

[@slakakakakkaaka]

Why is this in my recommendation

[@EngrTahirSaleem]

Good Learning Material

[@ontaonta7394]

fantastic work, good job, this is an expensive tuto

[@yottaforce]

It called millimeter!

[@unfortunate2565]

imagine using this whole tape and in 12:15 realise that you forgot to put these copper sleeves.. Shiit

[@Snilsya_son]

Ух срезать бы такой провод на медяночку...

[@fellovercliff4525]

That was sad'' no duct tape!

[@brushrescue1701]

WAW..... happy new year 2020 guys ❤️👍🏻👌🏻

[@TableTennis-Man]

very delicate. i think i can do it. where can i do this for fun ?

[@pashmaster]

Doesn't look happy the dude...smile!

[@danhard8440]

this seems like a very long process and can be prone to mistakes for something that can be easier done

[@cafeta]

what happened with the gloves?

[@ashboy225]

This dude is PPE to the max. 3:35 where are your cut proof gloves? Hu

[@dtiydr]

10:47 That took dam time for sure..

[@Ulyssis71]

I'd been doing this work since 1994 up to 2018 in the Kingdom of Saudi Arabia and having a certificate of LV, MV, HV, and Extra High Voltage certificate 230kv Sud Kabel and 380 kv Nexans cable. How I wish to do again this work in my own country Philippines.

[@mdzahid5120]

Cellpack very nice

[@vitormasson]

What a cable joint surgery!

[@BW-ut6pp]

Can't you just solder them together and thats it?

[@Texplainedeverythingdetailed]

I have an exam tomorrow, and this is how I waste my time.. exactly like the previous semester..

[@regnardin]

It's compatible for my e-bike ?

[@PBWillyWonka]

thank you so much, very informative video.

[@nadlek7415]

do NOT cut XLPE insolation 7:11 you see a clear cut in it ... GG

[@piotrkubiec5549]

I thought that it showed in my recommendations because somehow they found out that I work at a cable factory, but I see it's not the reason.

[@nasicher6773]

ich frage mich wozu er nun den Helm tragen musste .....?

[@WelchsFruitySnacks]

So as someone watching this not knowing what this is for. Is this for energy transfer? Like how you'd splice a cable to carry a current further based off amplification of the energy being transfered? Like and EDFA?

[@tohoto2183]

Еще изоленты богу изоленты. Слава другому богу ,что у нас используется термоусадка.

[@robox91]

Am I the only electrician watching this?

[@AliHureiby]

4:35 when you dont know what you read :)) , millimeter

[@hussssshie]

Take a shot every time he says emem.

[@sleepdep]

totally irrelevant information feels so gooooood

[@bismuthbepis7955]

So this is what it feels like to replace a power outlet if you are a dwarf

[@kittxgor]

Frank - did we slide over the copper screen sleeve I can't remember?

[@tiagodjmartinelli]

Tape, tape and more electrical tape...

[@RagupathyAc]

THANKS FOR THE DEMOSTRATION SIR

[@Slepa79]

ничё в электрике не понимаю, но понимаю, что это круто. У нас , наверное, на хомуты и изоленту посадили, исключая все остальные этапы))

[@jimcook8852]

What about safety glasses?

[@salehfarman3879]

What will happen if pencilling is not carried out by properly? Let say by using pen knife and cut of the sharp edge of the insulation

[@AnimeT0getherEU]

14:42 Performing CPR, 14:54 now to the beat.

[@joereza1505]

I like watching this.

[@luck_its_me]

why actually Shang Tsung working there?

[@aminkaiser8885]

great work

[@wizar_li9989]

Does it really said "m m" for milimeters ?

[@digvijayk4916]

Yes

[@brenyngreen]

So that's how I'll need to wire my truck sound system

[@danhard8440]

not sure how I got to this vid but I found a couple of things at 8:33 your not smoothing it your ruffing it and also why would you use a pencil ?? isn't graphite conductive?? and you could end with trace amounts in the insulation?

[@cocosloan3748]

Woooww ...Couldnt this be made easier? Just rolling that tape is too much strain!

[@chillypingu8574]

Omg 😮 That’s a big cable !!!

[@MrTores92]

требую повтора в канаве по пояс в воде.

[@emmanuelfernando7939]

we need to invent a small machine that can tape around a wire automatically. There is a lot of taping going on here , it is highly tiring.