Restoration forklift truck old broken | Restore lifting machine Hydraulic rusty oil rusty

[@Restorationandmetal]

Subscribe to the channel if you like this content kzbin.info/www/bejne/mImwaqd3mt6qibc

[@jorgeceballos0825]

Hace un par de años compre una estibadora muy parecida a la tuya, un poco mejor y la deje tirada porque no funcionaba. Ahora estamos en curentena en colombia, estoy restaurandola, es un trabajo muy duro, pero vale la pena, con su expectacular video, me imspira a continuar el proyecto..felicitaciones

[@sdf7053]

Я в России ее году в 93 увидел первый раз, до этого грузчики на руках таскали ящики)

[@n01celticfan18]

TOP RESTORATION JOB WILL ALWAYS GIVE A GOOD LIFT NICE COLOR CHOICE.

[@GreenlandReaperbinder]

Thanks bro

[@kennethcooper1846]

If you've never rode one of those like a scooter throughout the warehouse then you're truly not a man lol

[@bmccarty2012]

Many times. The older models weren't as top heavy and were better for sliding around corners.

[@nickpeterson8080]

Bit hard to steer haha

[@jeffr0]

And clipped a pallet, and gone over the top!

[@james211075]

when i worked at somerfield stores we had 2 and used to race them around the warehouse, fun times. at work we used to call them "pump trucks" is that not what they're called?

[@kennethcooper1846]

We called em Pallet Jacks and man our warehouse was almost a perfect oval and we would swing them around the corners lol. I use to call it Jack Drifting lol

[@chrischery7492]

Very greatly work but color paint is very discusting

[@mathiasmartinezdeoliveira2220]

Foi a melhor restauração que vi no KZbin, parabéns, muito bom seu trabalho. Aqui é do Brasil.

[@hinz1]

Wow, a restoration that's not totally fake, rare event on that channel!

[@deepakpn813]

Please teach me how to repair hydrolic jack

[@chamarystigers8731]

👍💪forklifting work fine

[@JohnScarchilli]

forklift truck? pallet jack!

[@carlmcgee1623]

Have used one of these many times and never really considered all the working parts or any kind of restoration. Thanks for this and GREAT WORK !!!!!!!!!!

[@Dr._Love]

I do so enjoy this channel

[@SuperAgent099]

What make was this pallet jack? Fantastic restoration!

[@scroungasworkshop4663]

Great job. I just refurbished mine last week. I paid $10 for the jack but it didn’t work so I stripped it down and replaced two seals that cost $10.70 for the pair. Like you all the wheels and grease points got sorted and now for $20.70 I have a pallet jack that will see me out. I made also made custom pallets out of railway sleepers and put my heavy machines on them and now I can easily move them around. It’s one of the handiest tools I have. 😂😂 Cheers Stuart 🇦🇺

[@VikxMai]

I work at a grocery store as a night stocker and we use these every night. Funny thing is we have more broken pallet jacks than ones in actual working order. Anyway, great video.

[@AllRandomized]

I’m a forklift tech and can tell you, with the labor price we charge, plus traveling for parts. Almost anything being fixed will cost more than a new pallet jack

[@richardroome8870]

8.46 nothing screams more dubstep to me the repairing an old pump truck 👌🤛😍

[@Sp3cial3d3st]

Awesome video very good job I ever think not one complaint

[@dan_6915]

Cca 2000 i used to work in an electronics store, carying boxes with dvds, coffemakers, dusters, with forks like this. On the way back to the storage area, i used to ride them like a foldable scooter. 😂 Fun days.

[@metalman065]

Awesome Rebuild brother.. pallet Jack's are worth 379.00 new from Raymond, you just made yourself a good paycheck. Great job. Use coffee filters to filter your decreasing solvent, it'll last a lot longer..

[@garyjones7198]

That pallet Jack sure had a lot more parts than I thought it would... Nice job.. Take a couple bucks and get you a decent work bench and get your work up off the ground.. again, nice video...

[@iulianalexe1666]

AWESOME JOB 😊😊😊😊

[@mpalaskokkalis1476]

Τέλεια η κατασκευή του κλαρκ χειρός.

[@rigostar14]

Forklift truck????? You mean pallet jack!!!!!!!

[@teama224]

Awesome video but just a quick tip you can burn the camera sensor by filming the welding arc.

[@franckgautier1600]

What is that color ? Does it have a ral paintcode ?

[@frucajoma]

Excelente trabajo lo único que mejoraría sería la postura no trabajar a nivel del piso

[@larrypierce2777]

Amazing that you found the bearing for it. Hard work does pay off. Those front wheels, I just bought the all the wheels. The same with the back wheels. Fine job there man. Nice and clean and will last another ten to fifteen years.

[@garymucher9590]

Interesting project. I really didn't know a pallet jack had so many parts. Thumbs Up

[@niteblaster1]

It's called a pallet truck

[@idgaf23547]

@@niteblaster1 I've always been told pallet jack so I guess it's got different names dude, not that hard to comprehend

[@snakecold6755]

jarod gould same same same

[@raf6118]

no cambiaron ni retenes, ni o'rings,ni limpiadores? buen trabajo

[@supernatureza]

Very good I love

[@zouhairsuleiman209]

When I used to work in a supermarket I used to unload trucks with a palette jack just like that one, wow that brings back a lot of memories, 40 years ago

[@Jessi-lb1pc]

Restorating this forklift is very difficult.thank you for nice video

[@goldenhands5295]

Very Good Restoration

[@topmak3463]

UTILIZAR SACA PINO PARA REMOVER O PINO ELÁSTICO 06 E NÃO USAR A CHAVE ALLEN, POIS VAI DANIFICA-LA.

[@КошмарКошмар-й2б]

Very good restoration bro 👍👍👍

[@restoration86.]

good job pro

[@dannyyo7948]

0:57 anyone noticed he was faking the jack wasnt working by holding the little release lever? great dismantle and mantle!!

[@TheWalter67]

Eso no es fork lift Eso es un pallet jack

[@Njazmo]

Great job adjusting those front wheels. Other fork is much higher than the other.

[@AngeGue-l6j]

Cool 👍👍👍👍

[@ThePurpleSquirrel]

I couldn't take one of these apart much less put it back together. And you did most of the work on the ground in a squat position. I can't do that either. I was longing for a workbench. Great work and you have a genius mechanical mind.

[@bujak3331]

Swietna robota a do tego taki mlody czlowiek

[@miga]

em là lính mới đã theo dõi kênh của anh từ đầu giờ cũng có 1 video rồi bác theo dõi em phát nhé, để em lấy đà cảm ơn bác, à em ở hn, trông nhà bác có vẻ cũng ở đâu đó quanh đây, em đi gom đồ cũ làm kênh ở cầu thăng long nếu bác có sang đây thì em xin liên hệ giao lưu nhé

[@miga]

em quên: sđt của em 0989664123

[@Restorationandmetal]

hai phong hello ha noi

[@budwhite3570]

I have alot of experience with what we call "pallet jacks",....and its interesting to see one rebuilt.

[@snakecold6755]

Bud White same machine

[@ГосНаркоКонтроль-е3н]

Новую роклу быстрее, дешевле и проще купить, чем влаживать сколько труда в старый хлам

[@nahorbrooks2776]

Nice 👍🏾

[@fiatunonewsletter6782]

Well done! That is worth something in a warehouse!

[@Jessi-lb1pc]

Good video👌

[@leonardopenna6214]

Colpisce la professionalità della postazione di lavoro, ma quello che lascia senza fiato è la scelta cromatica !!!!!

[@gibbo9089]

That style of pump truck hasn't changed over the years. Just slight design changes. Always seems to be the same orange colour.

[@thelyingscotsman7993]

Over here we call them pallet jacks,great restoration.

[@scroungasworkshop4663]

Same in Australia 🇦🇺

[@user_fgk_135jx]

Зачем седло подшипников так обильно мазать? Надо слегка жидким маслом для посадки. А так все понравилось. Супер!

[@Aniemius77]

Не хватает удара по пальцу когда подшипники устанавливал)

[@redfaction2540]

Magnifique 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@smokeydoke100]

That's not a fork lift, it's a pallet jack. Completely different machine.

[@Drawingmanderfull]

looks simple but a lot of difficult details .. thanks for the video showing me how to remove them

[@elkinruiz1562]

Excelente trabajo, felicitaciones!!

[@KhaosGorvin]

I've seen a lot of forklifts over the years, but this is the coolest one so far. It surpasses by far the one with an Hello Kitty sticker.

[@Restorationandmetal]

thanks you very much. Have a nice day

[@erik....]

Very nice, maybe you should have some thick protection film on the forks to protect that nice paintjob. :)

[@tonyxu526]

How did push the big spring back?

[@petepeterson4540]

you have a warehouse scooter by pumping the handles side to side you can get going quite fast and by turning the handle where the wheels are facing the side you have brakes lol try it it's fun

[@JDLarge]

Excellent job! Not big on that color but it’s still nice. I thought you’d go with yellow and black... Thanks for sharing😉

[@deathvalleyalex9485]

I was told 50 years ago that this is a pallet jack . Cool job taking it from junk to a useful Tool !

[@ryan2010giggs]

we call them pump trucks!

[@nobleroman5601]

Beautiful job bro , excellent work . I used many of those in my day but wouldn't have a clue about restoring one, thanks for sharing this video with us all .

[@chamarystigers8731]

Cool 👏🏻👏🏻👏🏻👏🏻good job walcome back work job used forklift

[@jimb032]

Its a pallet jack, not a forklift. But I like the color - that will make it lift more. :D

[@rayjr62]

Excellent work, sir. My sincerest compliments.

[@jorispacque]

Nice video!! When hammering in a Bearing. Always hit the race where the smallest tolerance is or use a bearing mounting tool. Or you can use the old bearing to absorb some impact.

[@phalanx3803]

its a wheel bearing that's never going to go any faster then 5km/h it wont hurt if it was a combine rotor bearing yea don't just hammer that shit in unless you work at a John Deere factory where its SOP to just smash it in.

[@mikeecho5554]

I agree... his method can cause brinelling of the races .. which is not good even in low speeds. He could avoid it by putting a flat plate on before direct hitting.

[@fernandocampos6935]

Busco los rodamientos axiales, xq ta no se ve el numero ojala me apoye... B día

[@riverpiwo]

Awesome!!

[@brucecox5884]

good video, glad to see you put in new ball bearings in the wheels only thing I would also do is put a foam strip on the top of the forks as a bit of padding

[@romicatanicui985]

Gata ai reușit să fugi și Liza asta bravo măi băiete Bravo fură în continuare și ia arată ne că știi să o folie lucrezi ne felicitări

[@dan_i3i]

We call them pump trucks

[@osmaniperez4889]

That man knows everything is crazy, I congratulate you brother, I have learned a lot by watching you. Thank you

[@nelsonberenguer2434]

awsome pallet jack, good job love it

[@Daniel-zs3fz]

Thats the really great job! Respect and thanks for your time and for knowledge! :) God bless you!

[@evok2691]

A pallet jack. It’s called a pallet jack.

[@DonnaMSchmid]

What a cool restoration! It is wonderful to see something unusable being brought back to full functionality again! (Just one suggestion: I found your music to be so annoying that I had to turn off the sound... Have you ever thought about not having background music? A lot of us like to hear the general sounds of your work, such as hammering, without music added!)

[@Torfindal57]

i agree with you Donna, i like restauration channel with no bckg music to. But i have see some with and its depend of what music is playing, techno (or similar) its not good for audience, and you need to put volume to be barely ear.

[@Tageultusoul]

Nice work, the result is beautiful, the color is flashy ^^

[@tuyenpham949]

I love you guys, awesome

[@bonnie8441]

Excellent job.

[@herrroy4963]

Nice job! Now it will work for another 10-15 years or more :)

[@birabira3382]

Excelente trabalho Um grande abraço

[@rogeralves6100]

18:45 esse cara é da Bahia BR !!

[@felipelirabr]

Parece que é mesmo kkkkkk

[@Radionut]

Do you still have this beautiful restoration? Wow that was some work. Congratulations on a job well done

[@yeagerxp]

Well done 👍👍👍. Thanks for sharing

[@peterodushkin8434]

Good job man

[@RenanOliveira-mr1eq]

Olá, gostaria de saber se existe curso para conserto e manutenção de Paleteiras?

[@bmccarty2012]

It's a pallet jack, not a forklift.

[@Jmc150]

Pallet jack

[@Stevegetslucky]

That was great. I was worried about the colour. but it grew on me by the end. Top Job, nice work.

[@iulianplesa3872]

Bravooo👍👍👍👋

[@davidchaney4193]

I wonder if he keeps all the stuff he fixes..

[@wahyudiakang4433]

Sukses buat anda

[@tomo150686]

Nhìn 1 phát biết ngay VN .

[@chrisp3622]

Perfect job,congratulations

[@hectorquinones4824]

Love the work u do. Awsome

[@tiptop1102]

Greeat job ! This guy is so strong 😮😮👌👌