Restoration VW Beetle - Rear Quarter Panel - Metal Work!

  Рет қаралды 118,143

CT

CT

Жыл бұрын

Today we install the rear quarter panel on the 1965 VW Beetle! Removing the old rusted parts and fitting new body panels. Restoring antique cars complete process. Howdy folks! Enjoy! Preservation, restoration, repairing antique vintage cars and trucks is my passion. This car was forgotten in a field in South Georgia for 40 years. Let's bring it back to life. ctmoog, ct, ct's garage

Пікірлер: 205
@patshes1951
@patshes1951 Жыл бұрын
Never adjust a door whith a car on the jack. Do it when it is done and on its wheels on the floor. Take a tip from an old police mechanic. Or you will do it a 100 times over.
@novavolks9652
@novavolks9652 Жыл бұрын
I changed a flat with a cat and exactly what you mention happened to me
@Mikefngarage
@Mikefngarage Жыл бұрын
That was PERFECT.....you start at the detailed bends and work your way to the less detailed bends.
@CTmoog
@CTmoog Жыл бұрын
Thanks Mike! 👍
@deanage1983
@deanage1983 Жыл бұрын
One tack at a time. Don't rush. If something is not fitting the way you want there is no problem cutting it off. Keep the videos coming. Watch your old video on the ghia floor pan. Your welding is coming along more than you think WELL DONE 👏👏👏
@CTmoog
@CTmoog Жыл бұрын
Thanks Dean! 👍
@Mikefngarage
@Mikefngarage Жыл бұрын
exactly its only metal you can always cut it back off and do it over. not hard.
@JuanRamirez-dy9eb
@JuanRamirez-dy9eb Жыл бұрын
I like the passion you're putting on it.👍
@CTmoog
@CTmoog Жыл бұрын
Thanks Juan!
@housepumpinpc3983
@housepumpinpc3983 Жыл бұрын
This kind of work takes a lot of time. If you spent everyday working you may finish it quicker but working people playing with their cars takes a long time. Trying to get it right. The fight is not for the swift but for the one that endures. Great work CT.
@patshes1951
@patshes1951 Жыл бұрын
Cut and grind . Dont stop . Get it done!
@CTmoog
@CTmoog Жыл бұрын
Thanks buddy!
@Nelg230
@Nelg230 Жыл бұрын
When I fitted mine, as well as getting the door shut right I ran a straight edge across the bottom of the door so the bottom of the quarter panel lined up. You've done well replacing the bottom door hinge and having the door shut as they are a sod to do! (English phrase!) Great work CT!
@Pexyz
@Pexyz Жыл бұрын
Great work! 👍 //Peter
@stevencox1901
@stevencox1901 Жыл бұрын
The temporary cross brace is holding the body out a little further than where it should be with all the new metal. Overall amazing job. Well done.
@anibalbabilonia1867
@anibalbabilonia1867 Жыл бұрын
Damn somehow I missed this episode! Glad I found it! Man that’s awesome! Great metal work!👌😎👍amazing how well the door closes!
@peterhorn5042
@peterhorn5042 Жыл бұрын
I'm starting to fall in love with this Beetle. And it's fun to see you working on it! Keep up the good work!!
@CTmoog
@CTmoog Жыл бұрын
Thanks Peter! =)
@broomad
@broomad Жыл бұрын
Thanks
@broomad
@broomad Жыл бұрын
Thanks CT
@CTmoog
@CTmoog Жыл бұрын
Thanks groomed! =) I appreciate the help!
@AndrewHCann
@AndrewHCann Жыл бұрын
Also CT :) yes if was boss say your doing well of job and keeping up happy dance spirits on this project! Yes I enjoy watching your hard efforts and work on this project too plus take steps too !
@jeffstevens9105
@jeffstevens9105 Жыл бұрын
Great to see a restoration video showing just how hard it is to get these small areas to line up. I did some welding on a Mini here in England and when it’s complete and primed my mates couldn’t understand why it took so long! Here is the proof. Admire your optimism when sometimes things don’t go to plan. Hope to see the VW in all its glory one day.
@elaineferreira2980
@elaineferreira2980 Жыл бұрын
your work is detailed. you are very good at what you do. congratulations
@WalksInThunder
@WalksInThunder Жыл бұрын
Now that's some serious "Body English!"
@mrbrisket6794
@mrbrisket6794 Жыл бұрын
Nice…..if you watch Fitzee fabrications videos especially the video on replacing door bottoms and how he cuts the seam on an angle over top of the old sheet metal….it makes welding the seam really good and nice
@patrickvarney8815
@patrickvarney8815 Жыл бұрын
My first two cars were Beetles... a 63 and a 71 ...great cars always ran well...drove. them all over the place here in Victoria Australia as a surfer ...the 63 broke down and had to get an engine rebuild and got battered around a bit by my driving...the 71 was great kept it in great shape , serviced myself and sold it for a profit after about 5 years..takes me back seeing your work ...cheers Patrick
@jedschleisner8960
@jedschleisner8960 Жыл бұрын
Man, CT your kickin it! So cool to see you pro-gress! I wanna come down and hang out and soak it in. Ha!
@CTmoog
@CTmoog Жыл бұрын
Thanks Jed! =)
@tomcrater7470
@tomcrater7470 Жыл бұрын
CT That looking great!
@study650
@study650 Жыл бұрын
CT, you're really coming along great. You have come a long way since you first started on Rusty. Keep up the good work.
@surindersandhi3924
@surindersandhi3924 Ай бұрын
Hi My Dear Friend Very Very Good Job ❤❤❤❤❤
@philipsdefreville6138
@philipsdefreville6138 Жыл бұрын
Hey CT, you have a cool KZbin channel and get to work on some nice vintage cars. I admire your hard work and achievements, well done!
@CTmoog
@CTmoog Жыл бұрын
Thanks Philips! =) I appreciate that!
@jrlopez4585
@jrlopez4585 5 ай бұрын
Well, and the learning continues, you have got to be the best Coach and Teacher at this and on this video is exactly what I've been working on the rear "B" Pillars ... Thanks
@snowdogs59
@snowdogs59 Жыл бұрын
CT, it is great to see you taking chances and getting stuff done. You are clearly learning a lot on this car, don’t be discouraged.
@CTmoog
@CTmoog Жыл бұрын
Thanks buddy! It's good car to learn on. 😎
@temsumenlaao9209
@temsumenlaao9209 Жыл бұрын
​@@CTmooga. 😂ktic and clo cdxy t r
@leonardo57
@leonardo57 Жыл бұрын
the way jou welding is always dificult, even for a professional. so i think jou doing a great job👍
@Slick56
@Slick56 Жыл бұрын
I like what your doing. I would be pretty happy. Its cool to see you just soaking in what your seeing and doing and learning from it. I see things I like and don't like I see the same mistakes I make too. The Other side will be more matter of fact will go on faster and you will like a little better. Best of all for me is after watching I feel inspired to go out and work on a right rear quarter and channel end cap on my 66, so a big thanks for that! Cheers
@matthewmutch7853
@matthewmutch7853 Жыл бұрын
LOVE THE BUG!!!
@mikelove9832
@mikelove9832 Жыл бұрын
Look at You CT ! You should feel good about your self !!! Getting Better and Better the more you do ! Live Life ! Thanks Straight Ahead ✌😎
@dannyfoust3123
@dannyfoust3123 Жыл бұрын
Just liken to sit here and chill watching your videos. Awesome work every time, and the progress is amazing! One 65 making its way back up. Congrats on your choice of vehicles. Peace out!
@CTmoog
@CTmoog Жыл бұрын
Thanks Danny! =)
@antoniorivera6187
@antoniorivera6187 Жыл бұрын
It’s looking awesome buddy you’re doing good keep up the good work 👍🏻👍🏻👍🏻👍🏻god bless 😁
@CTmoog
@CTmoog Жыл бұрын
Thanks Antonio!!! 👍
@terryraymond7984
@terryraymond7984 Жыл бұрын
that is truly amazing how much that weld smooths up and looking good
@JoseSilva-we5yz
@JoseSilva-we5yz Жыл бұрын
Excellent project, I'm looking forward to seeing the end although I know it will take a long time. However, I'm waiting for it to evolve. Every day and week I wait for the post.
@novavolks9652
@novavolks9652 Жыл бұрын
I can tell you what soldering and patching takes the longest
@adambassador7727
@adambassador7727 Жыл бұрын
Nice shout out you did for Fitzee and Bad Chad. They are quite good...and clearly you're a good learner, man, because you're doing a great job.👍
@CTmoog
@CTmoog Жыл бұрын
Thanks Adam! I appreciate that. =)
@nadenolam8368
@nadenolam8368 Жыл бұрын
One panel at a time, next thing you know you’re done
@Mikefngarage
@Mikefngarage Жыл бұрын
You dont really need the copper.....some places you cant get it behind. It does make it easier. If you just hold the button a shorter time and do more tacks you can build up welds and fill in a huge gap. I do it all the time.
@garymallard4699
@garymallard4699 Жыл бұрын
Yeah..a gentle touch and slow heat can stitch it easily...stay around the outside and fill the gap... takes practice and patience to not overheat it and burn through constantly.!! 😆
@garymallard4699
@garymallard4699 Жыл бұрын
I use copper and brass when i can though..it does help alot...but sometimes you can't reach or get in there... i use various ways to hold it in if possible..i got normal arms..not some mutant...
@Mikefngarage
@Mikefngarage Жыл бұрын
when you have a larger gap it tends to shrink to fill in that gap. Yes you will need to do some hammering on that Wait till yo do those door bottoms. Then you will really see how much it warps.
@tomdunigan234
@tomdunigan234 Жыл бұрын
Thanks for doing these. I've been watching since Rusty
@CTmoog
@CTmoog Жыл бұрын
Thanks Tom!
@annies_vw
@annies_vw Жыл бұрын
nice work, it's a process!
@tomdale1313
@tomdale1313 Жыл бұрын
"TEXAS" says, "Let's get it in"...you got no fear, great to watch your skills progress in leaps & bounds, tanks for sharing
@CTmoog
@CTmoog Жыл бұрын
Thank you! =) 👍
@dickdegraaff5452
@dickdegraaff5452 Жыл бұрын
Hi CT, With some filler your weld will look absolutely great so this is a nice job
@terrybotts2109
@terrybotts2109 Жыл бұрын
that's alot of work but the end result looks great. 😊
@TimsWorkshopTJY
@TimsWorkshopTJY Жыл бұрын
Can't wait for the next one Buddy. The more you do the better you'll get at it👍
@CTmoog
@CTmoog Жыл бұрын
Thanks Tim! 👍
@richardbriansmith8562
@richardbriansmith8562 Жыл бұрын
Awesome Video CT
@SladesVWBeetle
@SladesVWBeetle Жыл бұрын
Keep on it brother!! You got this!! Take your time!
@CTmoog
@CTmoog Жыл бұрын
Thanks buddy! =)
@luisestebanpinilla5446
@luisestebanpinilla5446 Жыл бұрын
Nice job CT, but in my opinion it would be much easier if first you use magnets to prefix new metal patch and before welding put in the lower section self-drill screws to ensure right position of all. Then start welding flat sections and lower points (not all in the same area to avoid tensions. In any case you have reach great results.
@richarddecoster4464
@richarddecoster4464 Жыл бұрын
Look at it as a learning curve good experience for you and it adds up to a nice video for me to watch. Reminds me of the times spent with my grandfather working on an old Triumph sanding and patching
@julianroberts7116
@julianroberts7116 Жыл бұрын
Mate a good thing to do when fitting the new lower quarter panel there is quickly fit the running board back on for a minute, to make sure there's the right gap between the bottom of this panel and the top of the running board - you see SO MANY restored bugs where this hasn't been done (like mine :D) where they've welded the repair quarter panel on, finished, painted the car and only then do they fit the running board and discover a massive gap. Another way to look at is by making sure the line along the bottom of the door is continued neatly by the bottom of the new panel. I know it's a bit late for this side, but you can maybe remember this advice for the other side. You're doing absolutely great though, you're so inspiring! Keep up the great work and brilliant videos. Regards from UK.
@CTmoog
@CTmoog Жыл бұрын
That is really good to know. I noticed that this panel is not even across the bottom. I don't how that happened but I'm going to fix it. I'm doing the passenger side next. I'll get that side looking good then go back and fix the driver side. Thanks for the advice! =)
@terryraymond7984
@terryraymond7984 Жыл бұрын
I like the monster teeth on youre new welding helmet
@richarddecoster4464
@richarddecoster4464 Жыл бұрын
Go with your gut you're doing fine 🙂, seeing this beetle come back from the grave awesome
@laurindobarbosa3470
@laurindobarbosa3470 Жыл бұрын
congratulations on your work keep it up it's a success hug from Lau tapeceiro Matão São Paulo 🇧🇷🇧🇷🙏🙏🙏
@CTmoog
@CTmoog Жыл бұрын
Thanks my friend! =)
@franciscoalberto6658
@franciscoalberto6658 Жыл бұрын
*Congratulations for your work. May God continue to bless you always 🙏.*
@ericcainer7755
@ericcainer7755 Жыл бұрын
Nice work CT as always excellence. 🧐
@eugenebaroni1298
@eugenebaroni1298 Жыл бұрын
Great job 👍 WOW keep up the awesome work..
@andrewbrown1463
@andrewbrown1463 Жыл бұрын
Nice job CT. Looking forward to your next update.
@marklawson8811
@marklawson8811 Жыл бұрын
Thanks!
@dannydoyle3687
@dannydoyle3687 Жыл бұрын
CT, if you use a air gun you can cool down all your welding so you can move on faster.
@tonze9829
@tonze9829 Жыл бұрын
I have a suggestion that you may find it easier to remove the weld with very little, (if any) touching the parent metal if you use the grinder laying almost flat onto the peak of the weld but using the side of the wheel from left to right in a sweeping fashion so that the wheel is crossing the weld RATHER than the nose of the wheel in a plunging fashion and digging into the parent and weld. This is a method that I use and it is more controllable. Please this is only a suggestion. I'm Enjoying your video and the way you are improving the welding - keep it it up! Cheers Tony from Middlesbrough UK.
@jchihat
@jchihat Жыл бұрын
I truly enjoy, The amount of the work, that you show .
@novavolks9652
@novavolks9652 Жыл бұрын
I also like the restorations of the beetle
@hded06
@hded06 Жыл бұрын
Nicely dun! BRAVO!! 👏🏽 👏🏽 👏🏽
@stevewoodw
@stevewoodw Жыл бұрын
I'm a novice too and I think seeing you just get on with it and do the best job you can is an inspiration. With mild steel, you can't be guaranteed that the steel will respond the same (the existing bodywork may have a slightly different performance with heat than the new panel. From what I've read the steel should be 0.9mm thick but there may be some off days at the steel plant and it's a little thinner - is it worth checking with a micrometer before you weld to see if it's the same thickness?). I agree with the guy who said you could have put a brace in at the back and also, when welding a panel like this one, but if you have three people there you can think about doing this type of thing. Getting a tack on either end until the new panel is in place helps and then tacking at equal distances (one or two inches apart seems to be about standard, but in some cases you might tack and check if everything is alright) seems common, this may help assess if the warping of other panels might take place. If you have a plan of how to go around the car, practicing and looking for any unusual performance of the welds so you can start in the least visible places (in this case, under the back seat may have allowed you more chances of checking that the metal is predictable in terms of how it responds) and then improving your plan as you progress to the most visible spots. The more you're aware of as you learn, the better your planning will be in future. Good luck with the rest of it - when you're talking about the next panel welding, you can refer back to this one and others to help people build up their knowledge.
@novavolks9652
@novavolks9652 Жыл бұрын
It would be a good idea to use TIG welding
@valmircoutinho2706
@valmircoutinho2706 Жыл бұрын
Tá ficando muito bom show parabéns
@davidgrason161
@davidgrason161 Жыл бұрын
You keep saying that your work is not perfect and you seem to poo poo it at times. But, from my perspective, it looks excellent. You're getting it done and isn't that what this is all about? Are you planning on making this car a show contender or are you just planning on a daily driver? I have to say that your car and my VW are in virtually the same condition. I am learning so much from your content and I thank thank thank you. I've been all over Fitzee's content and learned a great deal from that obvious MASTER but your stuff here is VW specific and that's what I need. So, I'm a loyal subscriber and fan. Keep the up the good work. EDIT: I noticed that you've restored your pan before the body. Then it looks like you bolted your heater channels to the pan and then you are fitting the body to the heater channels. This is the opposite of what I had in mind on my car. I would have thought that I should build the heater channels to the body and then mate the body to the pan. Can you tell me if either method is ok, or doing it the way you've done with the heater channels on the pan first, is the way to go. Honestly, I don't know. But, after seeing your video here, I'm thinking you are right and I am wrong. Any suggestions are gratefully accepted. One final thought: I used to have an uncle, when he was living, that was a body/fender man extraordinaire. One of his favorite lessons that he tried to teach others was that, "You cannot get chicken salad from chicken shit." This meant that, restoring old cars was going to be difficult under the best of times and we need to keep that in mind as we work our ways through these projects.
@angiesouthers8836
@angiesouthers8836 Ай бұрын
Very nice
@foxtrotwarsaw117
@foxtrotwarsaw117 Жыл бұрын
I have watched all of your bug videos, there fantastic I'm convinced I need to restore one as a guy in a wheelchair just to prove I can 😄 (So who in the uk is donating a bug to me 😅) Keep up the good work can't wait to see it going
@michaelcaradonna9347
@michaelcaradonna9347 Жыл бұрын
Keep it up. 👍
@johnskedgell405
@johnskedgell405 Жыл бұрын
Have. It watched ina few months. Drove me crazy that you never finsihed anything…looks like you are getting more on track…will start watching again. I’m not a welder, but I have always heard that you should leave the tip over the weld a bit longer. Keeps gas flowing so O2 does. Or hit weld or something like that….
@leonardoserra1386
@leonardoserra1386 Жыл бұрын
Wow oh my god beautiful 👏👏👏👍👍👍🤩🤩🤩 da hora isso parabéns curtir muito mais mesmo
@marcosdesousaribeiro3698
@marcosdesousaribeiro3698 Жыл бұрын
Está ficando perfeito parabéns 👏
@davidgrason161
@davidgrason161 Жыл бұрын
Não sei se o CT fala português. Ele pode não responder. Meu português é muito pobre. Eu falo um pouco por causa do meu espanhol. Eu concordo com você 100%. Acho esse projeto quase perfeito.
@TateReggie
@TateReggie Жыл бұрын
If you don't already own one, a Dremel 200 Series Rotary Tool with the EZ Lock 1 1/2" metal cutting discs (Home Depot and Lowe's) comes in handy for cutting those hard-to-reach areas. The 1 1/2" metal cutting discs cut thin and are more precise than the angle grinder metal cutting discs. Your bug is coming along nice. Keep up the good work. Those Porsche 914s in the background are so sexy. I own a '71 Porsche 914 driver. You will enjoy driving the Porsche 914, and they get lots of attention.
@CTmoog
@CTmoog Жыл бұрын
Hey Reggie! Thanks man. Yes, I've been want ing a Dremel for a long time. I think it's time to get one. Yes, the 914 are so cool. can't wait to get one of them on the road. Hopefully soon. are you running fuel injection or carbs?
@TateReggie
@TateReggie Жыл бұрын
@@CTmoog I'm running fuel injection. I purchased my 914 from the original owner after it sat in her barn for 30 years. I replaced the thick plastic fuel lines with stainless steel fuel lines, replaced the high pressure fuel hoses, and replaced the fuel filter. Then, my 914 (with 42K original miles) started. The Porsche 914 and 912 are very similar, so I look for the 912 parts and info when I can't find it for the 914.
@FelipeMCalcado
@FelipeMCalcado Жыл бұрын
Very good! Congratulations! 👏🇧🇷
@thisoldwatch9944
@thisoldwatch9944 Жыл бұрын
Keep up the great work alway love when a new video on this comes up
@CTmoog
@CTmoog Жыл бұрын
Thanks! Will do! =)
@fredericvaneyll2281
@fredericvaneyll2281 Жыл бұрын
Hello. Nice job 👍👍👍👍
@HubertusSchaper
@HubertusSchaper Жыл бұрын
Hi, CT Well executed the new panel padge, your determination and patience are paying off buddy.greetings.HCS
@tonychamberlain8057
@tonychamberlain8057 Жыл бұрын
Yes mate Rome wasn’t built in a day you’re doing fine ….you’ve got good tools
@terryraymond7984
@terryraymond7984 Жыл бұрын
neat clamps I have never seen that
@tonze9829
@tonze9829 Жыл бұрын
Also CT please be careful that your panels are not too heated with grinding and polishing or you may have warped panels. a bucket of water and a rag works well to cool the panels down as will your air gun.
@juliojuliocesar8577
@juliojuliocesar8577 Жыл бұрын
A super máquina. 😎💯🏁
@davidnelson6893
@davidnelson6893 Жыл бұрын
Looks to cool to me
@TimsWorkshopTJY
@TimsWorkshopTJY Жыл бұрын
Hi CT, good job and since I've never done this before it looks great to me. Hey, one thing I know is air equipment and without self feed oil in your air compressor lines you need to put a couple drops of A1 oil in your grinders. That's why it's stopping on you. You better do it now before your motor see locks up like a VW motor😁
@dannydoyle3687
@dannydoyle3687 Жыл бұрын
CT by using magnets it would be a third hand & you can weld it all at once.
@ThePsychoNad
@ThePsychoNad Жыл бұрын
It’s just metal. Cut it out, weld it up, no problem. Don’t let it scare you, everybody makes mistakes, you just happen to be man enough to show it!😂 . Btw, I would just take that skinny wheel and cut right on that corner that sticks out a little, and then pull the metal where you want it, stick it, then fill if ya have to. Keep it up!👍
@SuperchiefApache
@SuperchiefApache Жыл бұрын
Love the content!! Now, put on some welding gloves young man!😂
@ricardolopezgutierrez1989
@ricardolopezgutierrez1989 Жыл бұрын
Saludos de Monterrey
@sandrobahry2558
@sandrobahry2558 Жыл бұрын
Hi guy, you're doing an amazing job. But We see that you adjust the doors and weld the panels body on jack. What happens when you lower the car and its weight is transferred to the wheels? Always double check the results on and off jack. This is certainly a tedious process until the final steps. Keep ongoing!!
@JoseSilva-we5yz
@JoseSilva-we5yz Жыл бұрын
I'm from Portugal😀
@marioperonfilho8118
@marioperonfilho8118 Жыл бұрын
Vamos esperar a próxima etapa, até ficar pronta
@francoisbouchard602
@francoisbouchard602 Жыл бұрын
Good.jop 😃😃👍👍👍👏👏👏😍
@gabrielmenera4246
@gabrielmenera4246 Жыл бұрын
Pues hay poco a poquito lo vas levantando ese vochito es un gusto q valla lento el proceso pero hay la llevas saludos wuero
@william_customz
@william_customz Жыл бұрын
That's progress when the door closes at any angle
@cyn2854
@cyn2854 Жыл бұрын
🖤🖤
@Demop_VW_garage
@Demop_VW_garage Жыл бұрын
Great work mate, make sure you strip that green shit off its a crappy primer to paint over😉👍🏽
@CTmoog
@CTmoog Жыл бұрын
Thanks man! I see you have a new project as well. That's a nice one! =)
@markiootje
@markiootje Жыл бұрын
by welding plate on plate i see others made use an Z form to weld it to each,the Z made they with an air tool,on that methode it welding easy and stronger
@danielhelbig1116
@danielhelbig1116 Жыл бұрын
Hopefully you put rust remover on the body/sandblast the body so you can see how bad it truly is.
@MrFad72
@MrFad72 Жыл бұрын
No, perfekt
@tomorrow6474
@tomorrow6474 Жыл бұрын
I realized that when I had utube premium I had subscribed to your channel CT ... I let my subscription lapse and I had to find your channel again and found that I haven't joined this channel and my views were dropped like I haven't seen any of your shows ... and I have been a fan since you started the dragon... don't know why utube is doing this
@ALAN-yr8rr
@ALAN-yr8rr Жыл бұрын
Top 🇧🇷
@type2ryder417
@type2ryder417 Жыл бұрын
Good job CT you have come a long way. Learn cut and but method to avoide having your welds sink in on but welds.
@jameskahlerjr.
@jameskahlerjr. Жыл бұрын
use a piece of metal you have that is my suggestio to you . to fix it and weld it to it your saving a bit of money for your project that you are doing now .
@heli-man-
@heli-man- Жыл бұрын
Looks like it needs welding again you should try 1” welds with spaces after tacking you should get better results you have an ideal opportunity to take some of your off cuts and practice or even cut some pieces in half and weld back together it will boost your confidence with a few nice welds under your belt good luck.
1965 VW Beetle Restoration - Metal Work A-Pillar
54:49
Installing rear apron on VW Beetle
27:38
Callahan's Garage
Рет қаралды 22 М.
I CAN’T BELIEVE I LOST 😱
00:46
Topper Guild
Рет қаралды 120 МЛН
How Many Balloons Does It Take To Fly?
00:18
MrBeast
Рет қаралды 139 МЛН
Survival skills: A great idea with duct tape #survival #lifehacks #camping
00:27
1965 VW Beetle Restoration - Welding Metal Fab
47:51
Fixing Up An Old Ford
51:39
SimonFordman
Рет қаралды 250 М.
1965 VW Beetle Restoration - Metal Work Continues!
37:13
Подменил НОМЕРА на ЧУЖОМ скутере 😱 #shorts
1:00
Лаборатория Разрушителя
Рет қаралды 1,4 МЛН
Çokk iyi bir tatktik. Gitti araba😁 #keşfet #comedy
0:15
Savas Aslan
Рет қаралды 6 МЛН