Full restoration a 1000 cc motorcycle racing car that was broken into 3 parts in an accident

Full restoration a 1000 cc motorcycle racing car that was broken into 3 parts in an accident

[@leofabbro456]

1) 1000cc with 1 cylinder!!??? wowwww.I’m curious about the make and model. 2) the broken parts of the frame looks like they were already poorly welded and broken again 3) false rust (over paint) which is only dried mud or rust effect paint 4) welding of the chassis without a geometry guide and with concrete bar!!!??? = unstoppable and dangerous motorcycle 5) grinding and welding of the piston without disassembly 6) reassembly of not cleaned motor inside (crank, gear box, cooling system....) and reassembly of cases without joints 7) reassembly of rusty camshafts 8) painting a dirty and greasy engine 9) poorly and dirty painting on tank disapears on final reassembly It's obviously not the same motorbike at the beginning and at the end. All that is fake. What you did to the broken motorbike will never work. You did'nt do restoration but massacre. Fake video.

[@mlmerricks]

Not a single gasket to be found, welding on aluminum with steel, probably improperly timed judging by the installation of the valves and cams. This whole thing is just OOOF!

[@legionkumar5471]

honda cbr 150r

[@q3511]

Thanks for saving me the time to write this up.

[@gatot4621]

1000cc.... Sebuah kebohongan...ini seperti Honda CBR 150cc..🤦

[@user-xc1hp7nz4n]

Я это тоже смотрел на одном дыхании. Думал что они его обратно выкинуть должны в конце😅

[@redentorreyes1494]

That is not a 1000 cc Honda. Possibly, a 150 or 250 cc.

[@mauricioavendano6294]

Callate y disfruta

[@punditsushilkumar39]

Kaha ji rahe ho Honda gold wing 1800 cc ki hai

[@anadil888]

@@punditsushilkumar39 13:06 ่บอล ่

[@hiroshiujiie]

mistake.100cc

[@mixdiver12]

This is sooooo fake 😂. Here we go again with the fake rust, just like the “computers” restorers…All rusted still inside and not a single part replaced.. what a joke

[@viktorstechkin8192]

После такой реставрации его еще раз надо реставрировать!

[@greenhat7742]

Да тут весь канал - один большой троллинг "реставраторов" :))) Заварка поршня, приварка рулевой - вообще адъ и израиль :) Покраска по окислам и ржавчине, сборка двигла со ржавыми распредами и ржавой корзиной сцепы - бест оф зе бест! На фоне этих юмористов даже е.матвеев - лох колхозный :)))

[@Kompot_rp]

Ты же понимаешь что это не имеет никакого отношения к реставрации и в конце ролика совершенно не то что он так усердно в тазике всю дорогу моет?

[@kidnova6648]

I can’t be the only one completely concerned through out this entire video 😅

[@darrenkaspers9331]

100% bodge

[@stephenoldfield3710]

Should come with a health warning….built for entertainment purposes only 😂

[@mekko2012]

i'm still waiting for the transmission restoration, feel like incomplete

[@johncorlett3699]

6x10 warranty........6 miles or 10 minutes, prettyish on the outside, argh on the inside.......

[@malcomhaye-re3zo]

38:01 😅pop 11¹​@@mekko2012

[@mformother4449]

A fairytale.Once upon a time there was a boy with a pile of junk.And he thought he could make the general public believe he could turn it into a motorbike.

[@amyk1769]

But the boy had some nice tik tok slippers 😂😂😂

[@MOSTRACOMOFAZMCF]

A moto do final do vídeo e a sucata do começo não são a mesma. Por que você acha que ele pulou a parte mais importante que seria recolocar o motor no quadro, religar todos os sensores e etc, e pula para a montagem das carenagens ? Um motor nessas condições não volta a rodar simplesmente com uma "limpeza" mal feita como no vídeo. Isso só falando por alto sem entrar em detalhes. Olhem por volta dos 30 minutos do vídeo como as carenagens pintadas sem lixar estão cheias de relevos e olhem na montagem final como a pintura está lisa só com uns descascados na pintura, da mesma forma o motor.

[@RinoelVideos]

And more.. the bike to stay in that state of "decomposition" would only likely be possible to be immersed in water for years.. but, notice that copper wires (the face is dirty but the copper is perfect) rusty aluminum parts, rusty tires, and even rusty plastic? Where have you seen it? So nothing beats this video!! E mais.. a moto pra ficar naquele estado de "decomposição" só seria provável possível de estivesse emergina na água por anos.. mas, notem que fiações de cobre (a cara esta suja mas o cobre está perfeito) peças de alumínio com ferrugem, pneu com ferrugem e até mesmo plástico com ferrugem? Onde já se viu? Então nada se bate neste vídeo!!

[@theu9584]

Meu irmão, o cara deixou o motor enferrujado, preto, td encardido e sua preocupação é essa??

[@theunlikelyphotographer5073]

I love the rusty plastic and rubber lol

[@fafnir-fasolt]

His welding knowledge is overwhelming: the rear suspension, the crankcase, and finally the piston. I must have missed these techniques during my apprenticeship.

[@Keeping-It-Real-55]

Im not too sure I would trust the piston, or the engine build in general. But hey they were not trying to break the bank on this restoration either.

[@davisMP]

Se suelda así para no agujerear la chapa y para dar relleno a un material muy fino

[@mioselalu142]

Halo my frends from indoneisa🔔🇮🇩

[@user-mp2zs1fb1b]

Это ужасная халтура а не как не реставрация!

[@user-wf3nj4ix5e]

that engine restoration part was BS

[@mikehanson7328]

Truly a brilliant piece of fiction!

[@streamrizer]

1 cylinder 1000cc holy crap

[@mariofabrizi5050]

Exactly, 500cc at most

[@itsrye8001]

@@mariofabrizi5050 it is a Honda cbr150 version 2.

[@papa_rz]

Damn.. 1000 cc with single cylinder😂😂

[@Cv_Chung]

Những chiếc xe 1000cc sẽ có 4 xi lanh 😅

[@Asit..]

It's CBR 150 cc bike😂

[@antoniodebelic5820]

Its not the same bike because when he cuts to the video of him assemblying it you can notice a three things 1. Paint is not the same 2. Engine is not "freshly" painted 3. The frame welds are gone like the frame was never broken

[@carloscontreras187]

La supuesta moto restaurada y la moto final son totalmente diferentes. Me tramó su forma de soldar, no se cuantos preinfartos me hubieran dado si no fuera porque a leguas se notó el montaje :D 😁😁😁🤣🤣🤣🤣🤣

[@DezGamingTTV]

Rusty Rubber and Aluminum that in it's self is amazing.

[@georgeday5901]

This is going to be really interesting when they try to fix the forks onto the frame,

[@user-pf5di6yq7r]

Qsq

[@user-nl7il5zb8m]

Absolutely incredible. I would not have thought it possible. I like the way the hole in the piston was merely welded and not replaced. I would like to have seen a bit more on the work to get the engine running. I'm sure it wasn't just press and go.

[@jayabdih1]

nice

[@HoldenCaulfield0_0]

You need at least milling machine to make that piston work. I actually don't really believe this restoration, that bike was too broken to make it work that easily. A lot of parts of the restoration are not shown so they could have replaced a lot of pieces instead of restoring them.

[@BINX-RR]

With the power of TikTok flip flops and a fake supreme hat anything is possible

[@SWEATY-Braaapper666]

Man was showing off the gas tank paint job like it wasn’t the literal worst paint job I’ve ever seen holyyyy😂

[@cobravids]

I a novice body man. I did a repair on the front and rear of a van. Noone could tell I did a repair and paint feathering job. Until I went and traded it in. They saw it. That paint work was less than quality for sure.

[@felipearias4830]

Esa pintura esta muy mal. Es pintura que le cae gasoline y se quita utedes me entienden 😮😢

[@Chekuthan0101]

The hardwork is mind-blowing

[@mightyman8028]

this would be incredible if infact that was the same bike cause that clear coat on the tank was obviously not the same one in the video unless you sanded it all down again all the way down to the bondo

[@jimg8887]

The tank looked like a milk dud when he finished painting it... 😂

[@mightyman8028]

@@jimg8887 Lol totally

[@Tomo01234]

this is fake restoration video. and that engine is done no way it'll run

[@Keeping-It-Real-55]

I could tear this thing apart really fast. But I could never put it back together. Absolutely amazing work, and memory of where everything goes. Not in a million years would anybody tackle this project. Thats what I thought anyways

[@Tomo01234]

fake restoration video

[@pinosino22]

Sir everything is cover with video,After you take apart and see video,you will be able to notice all the part in the same place

[@KonstantinKhipster]

Я не верю не одному его сварочному шву . Стиль сварки называется СРАЛА МАЗАЛА 😂

[@mehanizmmoney]

It's hard to call it a restoration. I'm surprised he's wound up)))

[@cobravids]

More like a patch up

[@tifoso4ever]

An absolutely entertaining sci-fi short film!!!! 😆😆😆

[@megavolt1978]

Absolutely incredible liars.)

[@mightyman8028]

There's no way that's the same bike

[@user-no3tx2jf1z]

Почему наши умельцы не умеют так ремонтировать-заварил поршень, отмыл немного, зашпаклевал бак с дырками. а им все новое подавай?😀😀😀

[@user-oc8kt7wn5n]

дааааа, как он искусно дыру в баке шпаклевкой заибенил..... а.... уметь так надо

[@user-yp1bu5if5s]

Меня убило когда он поршень стал варить!

[@mazawmapachuauchawnglul1226]

I dont think its the same bike

[@user-qo1nx8gq5k]

not 1000cc that is CBR 250

[@outlawgruntsgaming6186]

Must be the world's first 1000cc single cylinder.

[@JohTriBolta]

Maaan!!! I have made impossible!!! You have made the mirracle!!!❤❤❤

[@ratravision]

Good work man 👨

[@koteiko2011]

Я надеюсь этот парень еще живой))))

[@madhanter7898]

Много не показанно, по итогу видно совсем не то, что делалось на видео.

[@Lil-D3]

You need a sand blasting cabinet

[@tsiokosd82]

Oh that piston is fully restored, a little welded and it’s like new. Ready to run

[@SilenceJetss]

Hahaha single cylinder, 1000 CC😂

[@badspy100]

🤣🤣🤣🤣🤣

[@saulkemp5938]

😢fake, i might believe the body restoration but the engine (!!!) Pffftt, the rusted timing chain, the falling off valve... Hahaha wat a laugh!!

[@jostouw4366]

The flame cut frame was no accident either

[@justinboon3811]

Awesome little 125 project 😂

[@user-px8pj1os4c]

Двигатель данного мотоцикла собран по всем правилам механики, особенно заваренный поршень!

[@kal-El774]

From a scrapyard he takes out all the plastics, engine, wheels, seat, everything in good condition to only clean and paint badly... and the speedometer? And the engine gaskets? don't you put them new? false and FAKE. I think not even the same motorcycle from the scrap yard or anyone believes that it comes out of the garbage... safety boots are the best, the tik tok 😂😂😂😂😂 not even the one who records the video believes it .😂😂😂

[@user-by4sy2nw6e]

При сварке использовал в качестве посредника пруток арматуру периодического профиля? Ну хотя бы гладкий, или просто болт креплени какой нибудь

[@lucasalves4592]

Essas pessoas que restaura parece ter super poderes, uma moto toda queimada ele não troca uma peça aí a moto funciona direitinho esses ferro velho tem que contratar esses cara para conserta .carro é moto 😂😂😂

[@josearias1847]

Ese arreglo no me ha terminado de convencer

[@nexxo9352]

Es una moto diferente la del final xd

[@osmarzambrin5207]

Incrível a capacidade de restaurar uma moto nessas condições, Parabéns 👏👏. Se eu desmontasse iria ser jogado para o ferro velho porque jamais conseguiria montar de novo😂. Abraço do Brasil 🇧🇷👍👏👏

[@MOSTRACOMOFAZMCF]

A moto do final do vídeo e a sucata do começo não são a mesma. Por que você acha que ele pulou a parte mais importante que seria recolocar o motor no quadro, religar todos os sensores e etc, e pula para a montagem das carenagens ? Um motor nessas condições não volta a rodar simplesmente com uma "limpeza" mal feita como no vídeo. Isso só falando por alto sem entrar em detalhes. Olhem por volta dos 30 minutos do vídeo como as carenagens pintadas sem lixar estão cheias de relevos e olhem na montagem final como a pintura está lisa só com uns descascados na pintura, da mesma forma o motor. Se for procurar detalhes tem muito mais.

[@RinoelVideos]

E mais... Onde é que já se viu ferrugem em pneu, pessoas?

[@elizeuferreiradasilva3647]

Eu nem acredito que assisti esse vídeo inteiro pra ter um final tão frustrante. Deslike👎. Mas quando vi a solda e a pintura mal feitas já sabia que não ia prestar!

[@fernando.dragaossj3]

Motos totalmente diferentes. O motor ficou deplorável, e da pra ver que se trata de outra moto

[@motoimz430]

Братан, это не ремонт, а пустая трата времени. Они ничего там не поменяли, покраску производили по ржавчине. Раму сварили как попало. На этом мотоцикле опасно ездить

[@76vetten]

He welded the top of the piston. You can’t do that. He cobbled that bike back together. Wow. Well done.

[@johncorlett3699]

didnt even take the piston off, filled the crankcase with spatter and filings........jeeze

[@deathprooff1972]

don't sound like a 1000cc more like a 250cc here

[@baykus790]

I think you could make a new one in the same while

[@georgeday5901]

The frame is only fit for scrap

[@pierolefebvre5302]

This super 👍👍 they were born with an engine in their hands .Not a Canadian or an American who would do that . Congratulations to him . 🇨🇦👍👍👍👍👍🇨🇦

[@PedroG-xh6lh]

Why are there so many haters in this world. Let the guy do his own work in peace. It's not you it's him. 🕊️ Peace!

[@niranjandas1953]

Mechanic did not fitting,why video making?

[@itsrye8001]

Hm, nasty. props for making it run. hard to call it restoration though.

[@kobeldokes]

What a mess!!.............you did an awesome job!

[@ravnx0167]

bro no 1000cc 4 inline yes 1 cylinder 250cc?

[@kerekgyartokerekgyarto8051]

Bad quality welding, life-threatening!

[@aneiliekire1291]

This looks like a cbr 150 to me

[@BINX-RR]

This is like one of those movies you show your friends knowing it’s bad but that’s what makes it good. I’d love to start another channel just tearing into these “restoration videos” lol

[@RestorationVideo]

*_There's just something magical about watching something that was so old and broken being restored back to looking so new. Its such a thing to watch. ❤_*

[@moppelruel]

😂😂😂😂😂😂😂😂

[@dyakdaphogii-thewanderinga7695]

He is just fooling his self and all the viewers here who doesnt know motorcycle repairs and mechanic commented praising his work.. Waste of time.🤣🤣🤣🤣

[@JohnJohn83UK]

I believe this was fixed, made to believe it was all fixed but I reckon most was replaced and we are made to believe it was the same part that was fixed. Parts of the engine didn't even have gaskets and the bike towards the end is obviously a different bike.

[@jamesgraves2021]

Think you have the gloves on the wrong way the green bit gose on the parm off the hand not at the top

[@1stKnight.]

The longer I watched this the more I thought this was too good to be true.

[@AgusSalim-fv9uq]

So ended with different motorbike 😂😂😂, nice job guy..

[@peacefulpleb]

Rather him than me on that frame.

[@mariofabrizi5050]

My thoughts exactly

[@dikiahmadsidik796]

1000cc for 1 cyl🤣, it's CBR 150 Thai 2014,.... however it's awesome works

[@Chucthihien]

Very nice motorbike, congratulations

[@Survivalminercaft]

amszing fаke video

[@hermannneynens3184]

Ich bin 75 Jahre alt, und habe auch selbst repariert und restauriert, Junge, du hast Ahnung und dein Schweißwissen ist fenominal, trotzdem bekommst du kein Lob von mir, warum nicht, ganz einfach, schlampige Arbeit, schlecht gespachtelt, noch schlechter geschliffen und nicht nach gearbeitet, nicht grundiert, einfach überlackiert, was man so lackieren nennt, den Motor ohne Dichtungen zusammen gebaut. Nein ich hätte mich nicht getraut solche Arbeit abzuliefern, auch wenn ich jetzt einen Shit Storm ausgelöst habe, das Video ist keine Werbung für dich.

[@user-nh8lb5nl3n]

Волшебным образом двигатель с водяным охлаждением превращается в двигатель с воздушным охлаждением. Уже на этапе разборки стало ясно , что это фейковое видео. Двигатель не разобрали даже - и так понятно, что он сгнил и проржавел окончательно.

[@davidgibert9276]

El depósito quedó fatal, lo siento.

[@JacobLeeson-zk1ol]

This video was hard to watch. Nothing was done properly. Would’ve been nice to see everything properly sand down and or sandblast and full cleanup before welding. You can’t just do a tiny spot with the wire wheel and weld right along where it broke on both pieces. The metal along the break was not only filthy and rusted but also severely weakened from the break. Should have cut it further back and replaced it. Edit: the body filler and botched welding job finally got me. I had to stop watching. What a disgrace this restoration was.

[@deeboy4378]

I've always wanted a motorcycle racing car

[@luks2595]

Pusieron el mismo pistón? Mismo cilindro? Solo limpiaron el motor? Mmm una acelerada y explota o ni prende

[@georgepruitt1915]

Good work

[@soundslikebstome]

Gotta give him credit for getting that thing back on the road. The 1000cc claim is surely in correct. I sure doubt the geometry of the neck is correct, but who knows....?

[@Delok26]

Tales for fools. In this state, the engine not only cannot be started, it cannot be turned at all even by hand! Yes, and it is clear that a different engine is installed on the bike.🤣🤣

[@patrickrooney5130]

That is just unbelievable. Well done buddy.

[@guilleseba5697]

Asombroso!!!la capacidad de encontrar otraoto y simular que la restauró 🤣🤣🤣💞

[@erikaa1268]

cada vez gente me sorprende que tonta que es👏tu crees que soldando piston sin desmontar a motor no pasaria nada? restauración del moto 0 y luego pintura sobre la grasa🤓

Ya te digo es muy falsa esa restauración, como que sea una Honda de 1000cc con un sólo cilindro...

[@abirgaming8638]

This is not 1000 cc it's Honda CBR

[@chrisgibson5178]

Best of luck wielding a frame back together! Good Luck!

[@user-iu3cf2fh6g]

Awesome👍✌️✌️

[@aodhokelly8811]

explosive diarrhea was the cause, it exploded the bike into pieces covering it with the brown residue.. now he has to weld back the turd into one piece

[@osorio.garcia...777....]

Hermoso trabajo saludos desde El Salvador 🇸🇻

[@robertolasalvia7246]

Sei propio bravissimo bravooooo complimenti

[@jollyroger4805]

мне аж страшно стало за того, кто сядет за руль этой адской колесницы)

[@GRIZZLY-035]

Да а ещё на спортбайке рама из профиля 20-20 ещё и шовная.👍

[@rikuparkharmudai7091]

1000cc!!!! I don't know? Whatever it is, great build. 👍

[@abdulrofitok8411]

Good jobs brother👍👍👍👍

[@dedylumentut7922]

In the last minute, the installation of the motorcycle body was similar to the used motorcycles on which the body was installed, not visible when it was finished in restoration.😅

[@KALINGANJA007]

Excellent work

[@monierstephane3283]

Bonjour ''pourrais avoir histoire culte

[@matiasbogado8329]

This is all assembled, what a coincidence that everything he finds has rust that comes out even with water and it has all the parts

[@haroldchannel8883]

I'm really impressed

[@koteiko2011]

Желаем пацану успехов.И поофессионального роста.

[@marcobeccherle4661]

39:59 a valve cup is missing. Ready to be scrapped again

[@koomky]

Very very good job!

[@seongichong3617]

Excellent task accomplished

[@davisMP]

Good restoration of the 150cc I don't know how he did it but I lost half of the screws but the description of the video says 1000cc the bike lacked a couple of displacements or I enlarged the work a bit.😂😂😂😅😅

[@roadbull74]

I pity the poor soul who ended up buying this

[@donbowden5903]

I wouldn't trust that bike as far as i could throw it, i wouldnt ride it . That was the worst so called restoration i have ever seen.

[@mrsmith4662]

Wow, if this wreck (and that's an understatement) can be restored, anything can.