Toyota 4K Engine restoration

Old Alternator Restoration | Toyota Liteace Petrol engine Alternator Restoration
kzbin.info/www/bejne/fZnVhmOEpdN2gM0
Starter Motor Restoration - Toyota Liteace van starter motor Restoration
kzbin.info/www/bejne/naXIhXiQac2NZ6M
4K Engine valve cover and side timing cover Restoration
kzbin.info/www/bejne/oZK9g4CgfM-eobM

[@jonthatcher3958]

Working on an engine in white pants is confidence to another level

[@kylennelson5043]

I dont mean to be offtopic but does anybody know a trick to log back into an instagram account? I was stupid lost the account password. I love any tips you can give me.

[@thiagouriel2966]

@Kylen Nelson instablaster ;)

[@gilbertojesusgomezpatino6258]

Que precio saldrán esos repuestos del Toyota Ávila 1989 soy de Venezuela la mecánica en Venezuela está muy decaída y todo es costoso sin garantía

[@bathiasenghott248]

@@kylennelson5043 jjjjjjujjjjjjjjjjjjhjjjjjjjjjujjjhjjjjjjjjjjjjjjujjjjjjjjjhjjjjjjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjujjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjujjjjujjjjjjjhjjjjjjjjjjjjjjujjjjjjjjjjjjjjdhhujhjjjjjjjjjjjjjùjjjjjjjjjùjjjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjjujjjjjjjjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjjhjjjjjjjjjjjjjjjujjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjuùjjjjjjjjjjjjjjjhjjjjjjujjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjjjjjjjjjjùjjjjujjjjujjjjjujjjjjjjjjjùjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjhjhjjjùjjjjjjjjjjjhjjjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjujjjjjjjjjjjjjjjjujjjjjjjjjjjjjjjjjujjjjujjjjjjjjjjjjjjjjjjjjjjjjjjjjjùjùjjjjjjjjjjjjjjjjjjuujjjùjùùujjjjjjjjjujjùjjjjjjùjùjujjjjjjjjjùjjjjjjjujjùjjjjjùjjjjjùjjjjjjjjjujjjhjjjjjjjùjjujjjjjjjjjjjjjjjjjùjjjujjjujjjjùjjjjjujjjjjjujjjjùùjjjùjjjjjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjhùjjjjjjjjjjjjjjjjjjjjjuhùjjjjjjjjjjùujjjjjjjjjjjjjjjjjjjjjjjjùjùjjjjjjjjjjjujjjujjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjjjjjjjjujùjjjjjjjujjjjjjjjjjjjjjjjjjhjjjjjjjjjjjjuhjjjjjjjjjjjjjhjjjjjjjjjjjjjhjjjjjjjhùujjjjjjjjjjjjjjjùjjjjjjjhjhuùjjjjjjjjjjjjùjjjjjjujjùjjjjùjjjjjujjjjjjjjjjjjjjhujjùujjùjjujjùjjjjjjjùùjjjjjjjjjujjjjjjjjjjjjjjjjjjjjjjjùjjjjjjjjjjjjjjjjjjjjjjjjujjjjjjjjjjjjùjjjùjujjjjjjjjjjjjjjjjjjjùjjjjjhjjjùjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjhjjjjjjjuujjjjjjjjjjjujjjjjjjjjuhjjjjjùjjjjjjjjjjjjjjhjjjujjjjjjjjjjjjjujjjjjjhhjjjjjjjjjjjjujjjjjjjjjjjjjj

[@restoreitchannel7345]

There is a lot to say about this "restoration" , in my opinion is not a professional job ,BUT we need to consider the fact that they live in India, and maybe is very dificult and expensive to find a milling machine to resurface the cilinder head. I think they did their best with the resources they have. Keep going!!! Best wishes in you restoration!!

[@waynegoff764]

Maybe it didn't need skimming. You normally need to skim if it's warped.

[@kevinbrislawn5918]

I didn't see any torque settings on the head nor the front crank shaft or the oil pan..I hope it lasts

[@Ivan-ht3jg]

I agree 💯. India is one of the poorest nations in the world so this guy for sure isn’t doing this on a shoe string budget but less!

[@tarunjain1974]

Machine shops are easily accessible in India in semi-urban or urban areas. It's a fact that many mechanics in India don't use a torque wrench because of lack of awareness, but the fact is this is shoddy work even by Indian standards. Painting of flywheel and clutch assembly, mixing up the pushrods, no checking and/or adjustment of valve clearances are certain things that a mechanic won't do even in India.

[@muhammadanassiddiki5753]

Yes, You are right, Many of those commenting here are not realizing this reality !!

[@abadansyahqura2209]

Mantap, saya dari indonesia, semoga ALLAH SWT Memberikan Umur yang Panjang buat bapak ... Amin

[@budiutomo8889]

That cyl head tightening patern hit me right in to my heart

[@dapointes641]

Sheer heart attack

[@mssedmebich1621]

Somewhere in Japan an old retired Toyota factory worker is watching this and having a heart attack.

[@pelazgianilyrianalbaniansh6202]

Hahahahahahaha

[@stachu97]

I don't work in japanise factory but i don't belive what i saw every step is mistake

[@juggler808able]

@@stachu97 why freind every thing is mistake?

[@stachu97]

@@juggler808able just wath the movie and you will know

[@BrtCnK]

🤣🤣🤣🤣🤭🤭

[@fajarprasetyo7757]

I dismantle and install the machine every week, to study in my vocational high school greetings from Indonesia🇲🇨

[@tinkmarshino]

damn boy.. you make this old man proud.. this is how I used to build my engines when I was young.. these days if you don't use 10 of thousands of dollars worth of equipment they look down on you as a "shade tree" mechanic.. Every one of my many many engines ran and ran well for many years.. OUTSTANDING my brothers.. you are the men! With about 20 dollars worth of tools and some good understanding.. bang a great engine is born!!

[@KuntalGhosh]

So u call this spray painting of old engine parts a restoration 😂🗿

[@tinkmarshino]

@@KuntalGhosh That is rather a strange thing to say.. of course not. If that's what you think he did here, then you way off the mark.. but don't worry over much no one really minds much at all. Carry on and enjoy your day.. thanks

[@KuntalGhosh]

@@tinkmarshino rebuilding an engine takes a lot more than just installing new pistons and rings without measuring any size and gaps. He did not even attempt to resurface that fly wheel. It's just painted over. The amount of wrong procedures in this video makes "pakistani truck" channel's videos look better.

[@tinkmarshino]

​@@KuntalGhosh This guy didn't have a shop son.. he did the best he could.. I have rebuilt and refreshed many different engines since the 60's. Some race engines some lawn mower engines.. in the beginning I didn't have a shop either. Don't be so critical.. he did what you couldn't. You dream of trains he refreshes engines.. which is more productive? You try living where he does and see how well you survive.. Selfritiousness doesn't feed the bulldog boy.. And it doesn't look good on you either..

[@KuntalGhosh]

@@tinkmarshino i have rebuild few engines so it is not even close to unimaginable. . When u doing an engine do it right the first time . If u skip on steps & not measure things like properly gaping the rings then it will come back & bite u in the ass too soon! I have rebuild a 1.5l Peugeot diesel from 2001 that now has over 150k km since i rebuild it at 230k in 2014. And still going good with just about 382k , has turbo seal leak but it's going to scrap in few months so i don't care about it anyways. I have rebuild countless small honda engines & right now working on a gx200 from an inverter generator that has spun bearing & i bought it for 300$ on facebook. While i may not be the top of the line expert in engines i still can say whatever this guy doing is okay only if he uses this in his own car. If he is doing this for someone else then he is almost robing them cus there is no way this will do even 50k without major issues. Just looking at the surface of that flywheel says u a lot about his work ! I live in a 3rd world country and i know some mechanis who work exactly like him. I have seen those pakistani truck channel's using atleast a torque wrench to do the journals but here it's just a wrench they use to do the wheel nuts 🤦.

[@24RRTouring]

My favorite parts of the video were the machining of the block, head, and crankshaft. The precise measurements of all tolerances were especially riveting. Oh...wait....

[@elfernandez1850]

Something missing right

[@boldorboy08]

@@elfernandez1850 not just a torque wrench eh? What a rubbish rebuild.

[@henrychubbs2823]

I don't have the skill to rebuild engines but those flaws made me wince. And the way he installed the rings had to scratch the pistons.

[@madmanau8730]

It might come as a surprise to you but rebuilding this engine, even improperly, netted this man tens of thousands of dollars. Even if it went in the trash after the camera stopped rolling it served its purpose.

[@abdulbarshams9564]

@@madmanau8730 the part of the world where this channel is from this would be considered fine workmanship.... People here don't have any proper tools or knowledge...

[@MBIKES21]

These guys using none of the up market tools and gear make a fantastic quality job, well done.

[@feel7251]

so thats whats meant by sarcasm

[@jobusch]

say sike right now

[@alexa-lexx4568]

Че вы-самое главное корзину покрасил-ОГОНЬ -теперь точно помчит! Я вижу люди просто в шоке на всех языках!!!!

[@user-uu3lk9tq7m]

*10:45** ржавое колено👍*

[@user-tj7ys7bs2s]

Корзину и маховик покрасил а коленвал забыл покрасить, не порядок!!!

[@r-mma4908]

Зато масляный насос покрасил!))))

[@user-th3by8xe9y]

Это походу Индия да?

[@slavic666]

Они наверное даже о биении не задумываются, хотя вот в следующем видосе уже микрометром шейки потыкал ради приличия, так глядишь индикатора часового типа доберется скоро)

[@A8x8A]

It's better you use a torque wrench to ensure that all screws are tightened properly just like what maintenance books recommend All respect 🌹❤️

[@pathmanathanmohanathas5766]

Excellent to see this video. I am a automobile engineer hats off this work

[@luckyguy600]

Oh ... you're so fussy. I only want it mounted on my coffee table as a conversation piece. Ya I am old and single. Why do you ask? I had a 1970 Toyota Corolla Sprinter as my first car. $1,250 bucks out the door (Canadian currency) Ran like a little sewing machine it did.

[@MsOsick]

Я не моторист, но 6:01 - у нас бы в России этим бы никто не занимался. 10:47 - задранный да ещё и заржавевший коленвал прямо так кинули, блок на эллипс тоже не проверяли, 12:46 - ГБЦ вся в раковинах и без фрезеровки, фаски сёдел не нарезаны, клапана старые 15:16 - болты ГБЦ протянули как попало, а не в строгой очерёдности 18:08 - старую корзину желательно заменить. А вот воткнуть диск сцепления на ощупь, без оправки, - вообще треш! В общем ремонт по-индийски: главное - внешний лоск! Хотя за идею и старания заслуженный лайк!

[@Sourabh_J]

Why everyone screaming that he is Indian Mechanic??? This video is from Sri Lanka 🤦‍♂️.. And also try to appreciate the person who is trying with whatever tools available to him, maybe give him suggestions but do not make fun of him..

[@rueltraya2604]

Everything he does s wrong....

[@TFTeknician]

Ruel Traya Again like the person above said maybe he used every tool available to him...maybe he didn’t have the opportunity to take the block and head to a machine shop...and I’m sure he didn’t check any clearances nor use a torque wrench nor dispose of fluids properly but rather than acting like you’re an expert mechanic leave a comment or suggestion to help him improve his content

[@rangercwgbear6352]

What a bone head the order of parts weren't right and torq. Really it won't last lmfao

[@Plateaudweller]

@jose miranda They don't care. I caught a couple of Sri Lankan guys in my work street one Sat. They'd opened a storm water drain and had their car over it draining the sump oil straight into the storm water drain....that goes to the local wetland. I took a photo and immediately rang the local council ranger who got there in time to catch them. Apparently the ranger had been trying to find out who was putting oil into the storm water for months. Not sure what fine they got...but I hope it was thousands of $s.

[@keithvsmith]

He didn't check the bearing clearance, the ring gap, didn't properly torque the rods/mains/heads, etc. He did so much wrong, lucky that engine will last out a damn week. I don't care where he is from. Someone else stated in the comment he's from the Philippines and even they have Torque Wrenches in what equates to a 3rd world country! I been there, my fiance is in the Philippines. I was a Master Technician, had all 8 ASE Master Certificates and worked for GM. You watch any REAL mechanic worth his rate on KZbin and you will see them measure everything. Even then, the engine may fail on the Dyno! I just saw one fail on a Power Nation engine build and they know what they are doing. Don't make excuses! This is wasted money. That engine WILL fail.

[@ianallen2]

Engine looked great when done. No torque wrench to torquw the head down, or the bearing and big end caps. No oil on the little ends;. You painted the clutch pressure plate and the flywheel. The paint will just melt at temperature and gum up the clutch driven plate. Did you adjust the rockers and timing ?.

[@raziackzing]

@QuestionMan LOL.. elbow clicks and clocks

[@e36elliot28]

he didnt even put the rocker covers and the rocker pins in order.. he just pulled them straight put and mixed them up...

[@ashleydcosta1498]

No worries. the flies will take care of it...

[@user-cq9tc6oo5w]

Year adidas nike puma. 5555

[@anandiyer8655]

Leaving certain things to Mother nature.

[@DVNelson]

For the love of all that is Holy...get this man a torque wrench!!!!

[@brosefmcman8264]

Social media is really bringing our world closer together. I've never read such pleasing and uniting comments in the KZbin comments as this one! 😬

[@bot42]

Someone give this man a torque wrench, please

[@automationpk6720]

Bhai saab you know this is india not a germany they people dont know what is the tourqe rench hahahaà

[@Cole_King]

He needs a brain too

[@fitofight8540]

He can restore the engine without a torque wrench. He deserves a credit.

[@MrEdiboyzee]

Night King I’m sure he could do more than you

[@mannylingat571]

And ring compresson. Plasti guage.

[@joelneira8371]

Lo mismo lo hacía con mi padre en el taller...me alegra mucho saber que aún se hacen este tipo de restauración o reparación. ...mil felicidades

[@riskiwiatanto]

Terlihat sempurna untuk awam dan pemula.

[@emersonorlandoordonez1288]

Cool staff, God Bless him Come on people life runs different in the rest of the world!!! We are to proud here in America.

[@Patata0ke]

here in Ph, even a very little machine shop along the road have torque wrench 🤗

[@vasiliypro9975]

Просто жесть. Цыганская переборка движка))

[@fobosdeman4216]

Не дай бог этот мотор комуто поподеться.

[@Igor-us5em]

Абсолютно согласен!!!

[@aleksandrkhalaman7983]

На России всё аналогично...Хуйло мастера!

[@user-co1dt3tr8b]

Динамометрический ключ меня тоже поразил)))

[@dmitridiener6882]

В Индии это нормально, продаст как новый.

[@lt.schlechtnacht9414]

I love how they just dump the oil on the ground. Perfect for the environment👍

[@superknightlol]

thats first world problem

[@jones420of88]

Didn’t it come out of the ground in the first place?

[@MrRunt128]

Amazing! All done with a socket, a lug wrench and a flathead screwdriver. I bet it starts first time.

[@thicok4555]

Homie took every engine building tip and yeeted it out the window

[@gofmarshal]

Переборка движка в белых джинсах - это высший пилотаж☝️

[@user-xu5cp4vy7i]

Чувака вообще не парит почему у трёх шатунов отверстия с одной стороны а у одного с другой... Его вообще не парит ничего.

[@andysaunders3708]

Be nice to have just a bit of narration, explaining what's happening. The K motors were terrific, and I remember my partner buying a Starlet with multi-point injection. It was hit hard on the l/h side, but it was worth repairing, and it was surprisingly grunty. Even better the her earlier "Twin Squish" carburetor powered Starlet, and that was fairly quick for a 1300cc oushrod engine, even in stock condition.

[@krystalstarrett6760]

Thank you. I am old and retired, warm my heart as a mechanic retired. God bless you, be safe, and have fun.

[@krystalstarrett6760]

Looks good, last a long time.

[@jonminnella2966]

well if you stuck in the middle of the bush this guy probably get going working with what you have says a lot about you he doing the best he can with what he has to work with

[@Mark-vn7et]

Jon Minnella did you watch the video? Do you have any understandings of engine rebuilds? This engine is never going to run, not even crappy running

[@FirstNameLastName-fu8ml]

@@Mark-vn7et why? I don't understand a single thing a bout engine that's why i watch this. Do you mind explaining please? I know like the belt, piston.. that's basically it

[@Saskinny]

Love the Safety Flip Flops when performing engine work.

[@edgarqueguia2828]

Hello RE I'm 12 yrs old just graduated elementary last April no class coz of covid 19 i have neighbors auto mechanic shop I'm helping since grade 4 i observed you forgot; 1) check carbon brush from alternator. 2)you must adjust the timing belt to zero. 3) adjust the valve clearances of intake n exchaust from filler gauge. 4)you need to use torque wrench for equally bolt tight. I'm just guessing if I'm right if wrong....sorry from a small boy Pinoy.

[@boredcompsciguy]

Yep, that's the proper way Dump every fluid in one puddle and leave the engine on the ground with no pan. Top dollar quality

[@jean-michelb7290]

its India... the whole country is a garbage..

[@michaelsilver8404]

Para los pistones a necesita un opresor

[@jamesinc87]

The number 2 rod is backwards. All five main bearing caps are also backwards.

[@keithameerali9474]

Could be Now he is forever in reverse.

[@shadako2]

isn't everything backwards in the camera?

[@finxn77]

The number 2 rod is turned the right way before he adds the caps, just not on camera. You can see the hole being in the right position after a cut. But the bearing caps are all turning the wrong way. Also he is not using a torque wrench, so that motor risk falling apart. It's fun to see the engine being renovated, but I do not belive the end result is a good one here...

[@shadako2]

@@finxn77 no second vid :(

[@dylannewby402]

Watch all there videos hus mate owns a machine shop they measure everything to the right tolerances they just dont show it here. Trust me guys look at the views these guys putting every american automotive youtuber to shame.

[@tonylaw196]

Did you follow the manual for reinstall the crankshaft, piston and engine head, you must use Torque wrenches to fasten the bolt.

[@tylergrimes1256]

eh, he hand lapped the valves, its not a Ferrari. that little thing is hardly more sophisticated or toleranced than a mower engine... i suspect itll be just fine.

[@LifeOnOctane]

torque settings are in the muscles. u know nothing about that, so dont ask questions.! :D

[@sinformant]

@@tylergrimes1256 you know nothing about engines clearly. Even basic automobile engines have torque specs and orders things need to be torqued especially the heads. And I have done the heads on a toyota r22

[@GetFuckedUTube1]

He has a torque wrench. Don't you see it, it is that busted piece of pipe he adds to the bent piece of metal he uses as a ratchet.

[@nathanielbolden5053]

@@GetFuckedUTube1 lmao

[@nogginozzy6710]

Really appreciated seeing a 4K getting a restoration! I’ve owned two Corolla’s in my past, one with a 3K-H and another with a 4K-C. The prior mentioned motor I did an overhaul on. Very sentimental seeing this! They were great mighty little engines! Thank you so much for posting! 😁

[@nogginozzy6710]

I have to admit tho, I did exercise a certain amount of caution, precision, and proper skills performing my overhaul! Please no offense!

[@jhunbanasihan832]

Toyota 4kJ model engine we used in boats here in the Philippines! Thanks for sharing this video!

[@peaceabsolute3103]

Although difficult to watch, very impressive. You can tell he has very little resources and knowledge of engine rebuild protocol. Seriously job well done for having no procedural manual. Granted it probably died soon after, which is sad because I'm sure he was happy to rebuild the engine and have it run forever. Hope someone found this guy and took time to teach him how to build engines properly

[@noahwernersson5793]

Peace absolute well Said

[@kev8943]

you be surprised but vast majority of old 70s jap cars still running in sri lanka are rebuilt just like this, most people really don't spend anything above a 1000usd on something like a ke30/ke70 corolla engine rebuild. and most of those cars still can be seen on the road, living thru harsh humid tropical weather.

[@tonyeezi7315]

My biggest surprise was how long he managed to keep his white trousers white - I only have to walk near an open bonnet (hood) and I'm covered in oil/grease!

[@javieralvear4332]

only in india

[@ax-50]

I appreciated that you didnt put music. Sometimes the sound of the tools and knockings are better

[@jairolapitan9514]

The Toyota K series is an inline-four engine that was produced from 1966 through 2007. It is a two-valve pushrod engine design, a rarity for the company. It was originally built from the Toyota Kamigo plant in Toyota City factory in Japan

[@donaldhenke2750]

you are the man. i didnt see you use a torque wrench even one time.

[@suntzuwarsword1964]

Its not the way i do it with all my mod cons..but i think its really awesome..excellent work..thank you for posting

[@jamestorrens645]

There are people that build and disassemble engines in clean, organised and nice shops, and then there's this guy who does it on the ground outside.

[@indraasdhar9377]

Legendary engine toyota 4K in indonesia,cause easy maintenance,very popular in toyota kijang,also most choosen engine for swap ...,nice

[@floatncoffee]

I’m sure the rust on that crank will bed those new bearings in beautifully

[@ricpcunha]

Belíssimo trabalho. Eficiencia, simplicidade e correição na execução do trabalho. Parabéns.

[@tdautomotive8042]

Legend has it they are still getting the water out of the distributor to this day.

[@abdullahmalik9061]

You have done this job with extreme carelessness.

[@MichaudDaniel]

Still waiting for starting the engine. What happened, did it blow up?

[@NebukedNezzer]

never checked the rings for proper end clearance. this is mostly a paint it makes it look pretty. this is called a dirt ball rebuild.

[@yahyaallauddin8744]

Assalamualikm brothers every person has not a workshop setup. Some people have God gifted skills. And skilled and God gifted persons are not required so many tools. This man ausom plz appreciate him not discourage him. I think he can do every work at home.

[@marcoantoniovilla6012]

Un. Gran. Maestro. Mecanico. Saludos. De jalisco. Mexico.

[@emrwtf]

If this actually ran i believe every seal leaked. Looked good in those "fresh rebuild" ebay pics though.

[@tompopa4858]

Two years of auto mechanic shop in high school and I remember using clearance grease threads on the crank shaft retention bearings. Torqued them down, measured how far the grease spread and then sanded down the bearings to bring it into tolerance.... "Hey boss man, the engine seized after two minutes and won't crank over. It just clicks..... Ha ha ha

[@LitMakuh]

The toyota 3k and 4k engines are legendary engines.

[@albertocabral1569]

Hi everybody. 😁 hahaha wonderful very simple tools and very simple techniques 👏🤝👍

[@adrian5401]

A true professional, note how he uses the lug nut spanner as a torque wrench with percision. Who needs a snap on digital .

[@abrahambarit8518]

He knows the tension in his arms his(precions acts) yes that works say 5years minimum ...he knows the job well

[@QBRX]

Good enough in a pinch.

[@nathanscott1764]

Good job of keeping that pressure washer from spraying back on you. Every time I use one I always get sprayed back in my face.

[@nadernezamdiba2797]

Skilled in engine repair and Environmental Destruction !

[@raymondlau2110]

they got the credit for the work with what they have! just wondering how long it last without torque?

[@johnbgarza]

Straight or cross threaded... Tight is tight! Hell yeah!

[@glynchivers9519]

Who needs a Torque wrench when you have a length of 1" box section instead :- )

[@boomerhgt]

Ha ha true

[@nery200043]

This guy gives me ideas in what not to do like pouring trans oil in a motor, his doing his best in India

[@jamesblack683]

Good on the guy cor putting up a video.not everyone is blessed with certain tools.hel be working with what he can afford

[@kumaranil9914]

.?

[@jamesblack683]

@@kumaranil9914 yeah what?

[@GeorgeChristofi]

not even checking the big end clearances... random shells on a worn crankshaft.... that will knock like a very knackered engine withing a short while. Piston ring clearances? bore honing? It might run for a while, but it won't last long for sure.

[@GeorgeChristofi]

@Mason Pack but why put all that compound on? If the surfaces are ok then the gasket alone should work without needing goop to seal it.

[@johna2327]

Didn't even torque the bolts on the connecting rods, crankshaft main bolts or head bolts. But then that seems minor compared to the rest of the mistakes, huh? I wonder how long this engine will run for.

[@GeorgeChristofi]

@@johna2327 Being Japanese, probably a reasonable time with a lot of horrible noises until a big end bolt comes loose or the left over grinding paste in the head kills the new piston rings. When it got taken apart, there was a broken ring, yen none of the pistons rods or shells were kept with the cylinder they came from. ok, he fitted new, but what caused a ring to break, which cylinder and at least measure the bore for its diameter to get the correct ring set.

[@ozymandias7940]

Doesn't matter about the knocking 'cos he's going to run it on diesel anyway, 🤣🤣

[@GeorgeChristofi]

@@ozymandias7940 I thought he would use the same paraffin that he used to clean the block with.

[@hammerdragon4321]

These guys have a lot to learn on how to properly tear down and rebuild of a engine

[@milsge]

i hope you know that this guys dont give a fuck of what them do this channel only live for get quik and dirty money !!! and the worst of this is unknown guys look this and do the same on own stuff and kill it. i hobe planet safety comes to india and fuck this guys really hard for wasching oil into the ground i hope there have to drink water thats contaminated by themself out of the hole nearby the wasch place and get killed ore really sick for the rest of there lives and give them think about stuff like: was it worth it to get fast money for fucked up live!?

[@TiReX141]

@@milsge are you okay man ?

[@dzsam6026]

@@milsge what are you saying 80% of the polution was made and is made by the western world!! that s it

[@Miqbal-ze3zx]

@@dzsam6026 agree with you

[@beboboymann3823]

@@dzsam6026 Not really. China is one of the heavy polluters as well as shit hole countries like this but yet the rest of the world wants the U.S. to throw our taxpayer dollars into the Paris climate accords yet other countries take the money and do nothing to clean anything up. Thanks to Mr. Trump we pulled out of that lop sided shit.

[@sk8nasty]

Happy to see everything’s torqued down to spec!😂

[@Pendaws]

I love watching these videos. They remind me of watching mechanics for the last 45 years and these blokes are about the same kind of "caring" butchers. :)

[@saifuddinomarmohdfadzilah6342]

8

[@saifuddinomarmohdfadzilah6342]

S

[@pramudithad]

quite ok restoration but some important parts and machine works are not include in this restoration. but it will run better than before. as per my knowlege below are missing 1. Put new sleeves to cylinders 2. make horning marks in cylinders 3. polishing or add a sleeves to crank and cam 4. remake valve guides 5 . replace water pump 6. Repalce oil pump 7. replate clutch plate and pressure plate 8. restore carbulator 9. replace water jackets finally he didn't use the toque wrench to tighten up the bolts

[@chronoboat11]

There ya go! A good wash and a fresh coat of paint will make any engine run like new!!!

[@dawitkassa3131]

He seems knowledgeable about engine restoration. However, for best result, it was good considering engine block bore, follow torque spec, cylinder head bolting sequence. Other than you're doing Good job.

[@freddypuma2556]

excelente trabajo.solo una sugerencia debio lubricar los Cilindros y toruqear la culata por lo demas excelente.saludos desde Peru Atte freddy Puma c.

[@blairboyd4982]

You should just have something like a basin with some liquid, and just put the parts them into it. Then you used the air gun to blow it off,but you did a very good job .

[@motheolebelo]

Wow Outstanding work would be interesting to know how long the engine will last before it needs another rebuild as i see that the a lot of the major bolts where not torqued down.

[@christophermichael8969]

Right? Any Idea if that mini plunger and grit grease they used to refit the exhaust and intake valves would really work?

[@yuritarded8608]

Motheo Lebelo and im pretty sure he reused head bolts but i may be wrong

[@mannylingat571]

I think the engine will last 1 hour and blown out😂

[@atyourserviceable]

Well itm does have a 30 second ,thirty foot guarantee

[@andrescardona8268]

recommendation a support to disassemble the engine you have a lot of ingenuity to manufacture it

[@marianoeduardsonh.9265]

Ang ganda pagkatapos dating luma at sira nagawa pa at naging bago pa

[@jasonbrohipower4157]

Im not going to lie i had to wipe the tears from my eyes

[@user-pf9fc7fv8h]

Краткая инструкция о том, как «перебрать» мотор, собрать, завести, словить клина, разобрать и чесать репу над темой - что же я сделал не так?🤣👍

[@user-xl3bd3dq9m]

слава богу увидел родные русские слова, а вообще я бы ещё раз перебрал бы этот дрыгатель и с удовольствием

[@user-eq2rx4xj6l]

@@user-xl3bd3dq9m помытый мне бы оставил я бы то же перебрал как лялечку

[@user-xl3bd3dq9m]

да ааааа

[@user-gj9bi4rl6f]

На отъебись сделал...колено не шлифовал, плоскость головки не ровнял, головку вобще хуй знает как протянул...пиздец...

[@japanrustfarfareast3749]

@@user-gj9bi4rl6f Вкладыши не задраны,нах.колено трогать? Цилиндры скорее всего промеряли и не стали точить,гильзовать,головку и блок тоже нех.трогать,если плоскости в допуске.Но зато всё чистенько и окрашено,если где то косяк, сразу видно будет.Человек работал не у нас,и там за брак он раскошелиться из своего кармана,а уж как у нас на отъебись делают...Я про то,что пара комментариев на русском,и всё равно льют дерьмом.Запиши свой ролик,как ты капиталишь мотор,и покажи как надо.А пиздеть-не двигатель собирать, все мастера...

[@Nihllus093]

Creo que es una "restauración" casera. Esta lejos de ser lo idóneo, pero no nos engañemos, es lo màs habitual en los talleres del barrio.

[@user-zv6yg4uw2b]

Я так понимаю не только меня удивил коленвал в задирах на новых вкладышах любезно собранный))))

[@Happy357mag]

People are surprised he didn't use a torque wrench. He's stripping the engine in the dirt and throwing all the parts into a pile. As for engine assembly he just threw the parts back together. I wouldn't be surprised if he spins a bearing from lack of oil from a clogged oil passage. But hey it's shiny 🤤

[@jerryglen986]

Owner: How was the crankshaft? just scoring on the journals , still fine😁😁👍

[@yhird]

You guys are amazing. As a do-it yourself mechanic in Florida, I absolutely love these video. I have the highest respect for the skills and ability to do these restorations. Well done. Subscribed!

[@isaleon5579]

Me quedo atónita, que gran profesional, felicitaciones desde colombia, un saludo especial

[@mike921132]

That fresh tourqe spec thooooo, homie said "its all in the wrist"

[@irhamfaza7608]

encrypted-tbn0.gstatic.com/images?q=tbn%3AANd9GcTN851dEKVCMOK0n2iPFREew0oN99Yx_3CaAA5MEOAHJWUlf0AW&usqp=CAU this meme thoo

[@mike921132]

@@irhamfaza7608 fooooreeal lmao

[@JaimmyAC]

Bruh!

[@samiam7]

Tight is tight

[@paulinomarinfilho6089]

Çč

[@beto1515]

This guy knows what he is doing even he doesn't have all the special tools he looks like he's doing this all the time I know a mechanic like this guy same style believe it or not his rebuilt engines last very long

[@montesa35]

Cheap to run, easy to maintain, built like a tank. This was a common used Toyota engine installed on Owner-Type Jeeps & some private owned Jeepneys in the Philippines using the old Toyota Corolla chassis & engine which was a fraction of cost than buying a brand-new Toyota Corolla AE90s & AE100s during that time.

[@madhusankakalhara5367]

Me wage daksha adarshamath tharuna piris inna eka gana apita adamparayak jaya wewa🇱🇰👍

[@MiguelLopez-pf2un]

Hola ,muy buen video,lo vi desde salta argentina,quedo okm ese motor , ojalá aquo en salta hicieran asi un trabajo como ese 😀

[@andrepienaar6459]

This engine won't run very long. No drilling or checking sleeves, no honing, no polishing of journals, checking for clearances, etc.

[@ozymandias7940]

And just completely ignore and thought of using a torque wrench... A bit of aluminum pipe will do. PMSL...

[@ramirogomez1398]

Perfecto trabajo ,,,,un mecanico con experiencia no ocupa torque ni llaves especiales ,,,,te saludo de midland texas ,,,,,,este mecanico si es un maestro

[@bennythomasvivian8523]

Left handed mechanic always creative.

[@chronoboat11]

Silver and red paint will make any engine run great!!!!! Haven't you ever heard that saying????

[@abouabdelhamid5103]

and black 2 !!!!!

[@user-bs3xu9bf1t]

Отлично. Хороший мотор. Цепная передача. Не прихотлив. По 400 т без капиталки. Механик молодец.

[@calonpintar]

with all of my full respect, i really honored to watch your channel. you guys done tear down & starts engine with minimum equipment. salute. greetings from indonesia.

[@The4NATIC]

Краткая инструкция о том, как не надо собирать двигатель. Описаны все ошибки, которые только можно допустить :D

[@user-qm2fe2sm1v]

У нас в эндирее так газели собирают😁ниче бегают

[@Gurpreetsingh-yh3tf]

Toyota company should be awarded this engineer with 60 cannon salute 😂😂🤣

[@ianallen2]

Pointing dfirectly at him ? lol.

[@TheCrapman50]

60 cannon salute....... to the face! 😂

[@rueltraya2604]

🤣🤣🤣🤣🤣😜😜😜😜😂😂😂😂😂

[@sitidahlia2274]

@@rueltraya2604 pWAS p Pl p pl

[@sambasha747]

😄👍

[@danielsingleton3576]

The most professional engine rebuild in the house that day.

[@chetabumposess09]

Old engines are great, you can just guess every torque spec or clearance and you'd still be in the right range

[@rogerfilsdarbonne1216]

A

[@arthurhackman3229]

did the lifters and pushrods go back in the same holes? real important if not replacing them and the camshaft!