Completely Restores Old Generator

Рет қаралды 190,778

Күн бұрын

Пікірлер: 99

@luislapro4739 4 ай бұрын

This guy recalls me a Philipine guy who "restores"cars. They may have knowledge and tools but this is a terrible job, but very nicely pained. No torqmeter in engine, minimun oil when assembling so started mostly dried, no ring change, no torqmeter on cylinder head. On the generator side worse, you must make a deep clean in all copper coils with an dielectric sollution and if you want it perfectly, new vanish and oven. You wont see the effects of this bad job until you put generator in minimally serious load, expect stator or rotor burnt, bad engine functioning.. But very fancy painted. Something that pisses me off if dissassemblng machines in an absolute ridiculuos amount of dirt. No vacumm cleaner, no wd 40, no brush, just hammer and screwdrivre. did not see him putting the safety washers turned in the connecting rod or in the flywheel... so nice for seeing and listening to the bird, but terrible job. Sorry, a generator must work well, and may look well too.....

@restorationproduct1718 4 ай бұрын

Thank you for your contribution, we are very happy about your feedback, we need to try harder, thank you for everything

@laserbeam002 4 ай бұрын

Oh wow...I can't wait to see your post of how it should be done.

@sunnyormsby8402 3 ай бұрын

this is a time lapsed, and edited video, so it's amazing one can know what he did, and what he didn't do.😄

@Torfindal57 2 ай бұрын

and no electrical insulation or resistance measurements, no rotor balancing test, no bearings replacement, no coal contact surfacing, no stator internal treatment like varnish (because seem to be rusted and old)

@ronaldclark2624 4 ай бұрын

Good Job. Thanks for sharing. Ron PTL USA

@restorationproduct1718 4 ай бұрын

Thank you very much, we have many other interesting videos for you to pay attention and watch

@Dstromb232 4 күн бұрын

Great job! And nice shop you have.

@restorationproduct1718 4 күн бұрын

Thank you for your love, see you in the next videos

@Suç59 10 күн бұрын

Thank you, you saved me, boss.

@restorationproduct1718 9 күн бұрын

👍👍😁😁

@chawkiaban Ай бұрын

Bonjour de. PARIS Très bon travail Bonne journée à vous tous. Merci

@restorationproduct1718 Ай бұрын

Merci beaucoup, veuillez regarder nos prochaines vidéos pour apprendre des choses plus intéressantes

@billyhaddock5540 4 ай бұрын

RP, great job on redoing the motor. looks like the Generator was under water! u didn't redo the Coils. great job redoing the Generator. looks cool painted..

@restorationproduct1718 4 ай бұрын

Thank you very much, we always do our job well, please watch our next videos

@MarcoAAOrtiz 23 күн бұрын

Muito bem feita a restauração. Realmente ficou TOP.

@restorationproduct1718 23 күн бұрын

Muito obrigado, por favor assista nossos vídeos

@laserbeam002 4 ай бұрын

Another great job. Thank you for posting

@restorationproduct1718 4 ай бұрын

Thank you for watching and subscribing to the channel

@richardboreham1701 4 ай бұрын

Brilliant,well done on another engineering job only you could finish.

@restorationproduct1718 4 ай бұрын

Thank you very much. Please watch our next follow-up videos

@paulfellows2094 4 ай бұрын

fantastic job you do excellent work great video

@restorationproduct1718 4 ай бұрын

Thank you for watching and subscribing to the channel

@MiMi-nv6bb 4 ай бұрын

I'm Thai, I really like your way of repairing, I really like your channel.

@restorationproduct1718 4 ай бұрын

Thank you very much, we have many other interesting videos, please pay attention and watch

@AbderahimHaddani 4 ай бұрын

THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤

@restorationproduct1718 4 ай бұрын

Thank you for watching and subscribing to the channel

@AbdelkaderBenmoussa-nr4qk 3 ай бұрын

Jolie travail bonne continuation

@restorationproduct1718 3 ай бұрын

Merci d'avoir regardé et de vous être abonné à la chaîne

@LanDaiLyLife Ай бұрын

Hello ❤❤❤🎉🎉🎉

@restorationproduct1718 Ай бұрын

👏👏👏👏

@harishmathpal7458 3 ай бұрын

Nice work you rapaiar generator

@restorationproduct1718 3 ай бұрын

Thank you for watching and subscribing to the channel

@MUONGSOHOANG 4 ай бұрын

this is really an old one, I hope you can successfully restore it!

@restorationproduct1718 4 ай бұрын

Thank you very much, please watch our next videos

@gihaification 2 ай бұрын

Stop twisting wires together and get a soldering iron!

@restorationproduct1718 2 ай бұрын

we did it all right thank you so much

@kevin34ct 7 күн бұрын

Next time don't bury a perfectly good generator in the mud.

@restorationproduct1718 6 күн бұрын

Thank you for watching and subscribing to the channel.

@alevans51 22 күн бұрын

The question you should have asked was is what will the quality of the output be after all this work? Now you are stuck with a curiosity rather than something really practical.

@restorationproduct1718 21 күн бұрын

😜😜😜

@MiMi-nv6bb 4 ай бұрын

I'd like you to make a bicycle repair video too.

@restorationproduct1718 4 ай бұрын

ok we will do it as soon as possible

@СергейМалыгин-ф6к 4 ай бұрын

Класс 👍‼️🚂☁️☁️☁️

@restorationproduct1718 4 ай бұрын

👍👍👍

@alevans51 22 күн бұрын

Eye Protection - Without it your cateracts will be 10 times worse in old age.

@restorationproduct1718 21 күн бұрын

Thank you very much, we will learn from experience

@pedrobarragan1294 2 ай бұрын

Hola aqui abria que cuestionarse si la compra del conjunto de las refacciones superan a comprar un equipo nuevo gracias.

@restorationproduct1718 2 ай бұрын

Por supuesto, comprar una máquina nueva será más barato, pero la calidad no será la misma que la anterior.

@hoaithu235 Ай бұрын

máy 6 lắp buly kiểu này là chạy hết công suất của máy nổ luôn thì kéo củ 3kw thoải mái nếu hai buly bằng nhau thì đuối máy

@restorationproduct1718 Ай бұрын

động cơ D6 hơi nhỏ so với củ phát, cảm ơn bạn đã xem

@johnmuschweck9470 23 күн бұрын

I wonder full restore. What the cost would be . To buy ship to Ohio. Wonder watch this.

@restorationproduct1718 23 күн бұрын

🤦‍♂️🤦‍♂️🤦‍♂️

@АлексейКолпаков-о2х 2 ай бұрын

Генератор приказал долго жить, его выкинули. А этот человек пытается вдохнуть в него жизнь.

@restorationproduct1718 2 ай бұрын

😢😢😢

@Skolenovstanec 2 ай бұрын

И что ты хотела сказать?

@annab3182 2 ай бұрын

I had a question, just wondered why not just remove the extra dirt all around first the open the engine?

@restorationproduct1718 2 ай бұрын

we will do it in the next video, see you

@VjMarcosSobradinhoDF 3 күн бұрын

Eita servicinho mal feito

@restorationproduct1718 2 күн бұрын

🤦‍♂️🤦‍♂️🤦‍♂️

@EugeneVlasovca 2 ай бұрын

Can it work on canola oil?

@restorationproduct1718 2 ай бұрын

sure not, fuel is still diesel

@EugeneVlasovca 2 ай бұрын

@@restorationproduct1718 regular diesel engine can work on oil

@pmd9756 2 ай бұрын

Being in East Asia, it may work on peanut oil!

@EugeneVlasovca 2 ай бұрын

@@pmd9756 any light oil will do, maybe mixed with diesel. I saw one guy one KZbin he drives his car on free deep fry oil from restaurants.

@survivingwithrednecks904 4 ай бұрын

Should have replaced bearings

@restorationproduct1718 4 ай бұрын

Replacing the bearing will work better, thank you for watching and subscribing to the channel

@tothiquyen1295 4 ай бұрын

❤

@restorationproduct1718 4 ай бұрын

😍😍😍

@kalpeshpatel5783 2 ай бұрын

All this for just to weld two pieces of metal and grind them ?

@restorationproduct1718 2 ай бұрын

You are so funny, it can be used for many things like electric fan, rice cooker, refrigerator, the whole family will not worry about power outage if they have this machine.

@terryempson6635 4 ай бұрын

😊

@restorationproduct1718 4 ай бұрын

😜😜😜

@Marcos-xk5qt 4 ай бұрын

fez tudo legal chegou no finalzinho fez serviço porco nas emenda dos fio 🤦‍♂🤦‍♂🤦‍♂🤦‍♂

@restorationproduct1718 4 ай бұрын

Obrigado por seus comentários, aprenderemos com suas experiências nos vídeos a seguir

@esprimanyagi 21 күн бұрын

Facia😢

@restorationproduct1718 21 күн бұрын

😜😜😜

@saronironi-b8u 3 ай бұрын

Dynamo?

@restorationproduct1718 3 ай бұрын

Thank you for watching and subscribing to the channel

@jesuscuello8932 3 ай бұрын

Las herramientas asen al mecánico y el por mecánico. Que sea ami no me combense porque porque trabaja ala antigua con herramientas para otro uso usa herramientas de plomeria para trabajos mecanicos

@restorationproduct1718 3 ай бұрын

Gracias por ver y suscribirte al canal.