Master Mechanic Restores A High-capacity Air Compressor Forgotten Perennial // Full Restoration

[@texgowing7359]

Cracking job big guy👍. I'm a Diesel fitter of many years, & there was a few minor things I would have done slightly different, BUT, you did it your way & it works 👍 can't fault you, magic job buddy. You can work on my jobs a y time.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@DuniaMesin1]

mantap bro, salam sukses selalu

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@victorwilliams4026]

Great job! Respect for your craft and humbleness!

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@waynetubbs5914]

See you done a good job welding the tank!!! Got one question for you man where is your shoes?!?!?!

[@restorationsskills4967]

Thank you very much.

[@АлександрПавлов-к2ж4э]

Ремонт с использованием кувалды, молотка и такой то матери, смотрю и плачу, как это все не разлетелось, видно изначально вложили в детали максиум прочности, чтобы в последствии такие реставраторы могли от души лупить по ним тяжёлыми предметами

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wish you good health.

[@valterdim]

Show lindo trabalho 😮😮😮

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@RestorationVideo]

You did a great job, the machine is beautiful, you are very talented. An old machine that has been restored to perfection and works great! Congratulations ! It's great. I want to see more videos like this!!

[@restorationsskills4967]

Thank you very much . Please always support us!

[@скептикзлой]

за такой некачественный ремонт надо руки отрывать! подшипники заменили с помощью молотка😂, весь инструмент один молоток! нет сьемников, и остального инструмента. Поршень зарядили кольцами с помощью отвертки. Ужасный ремонт, некачественный. Цилиндр ржавый был при сборке. В общем просто почистили и покрасили. это не ремонт а просто переборка кое как😂😂😂. я такому мастеру не доверил бы даже детский велосипед!!!

[@joseparra2648]

Saludos de Venezuela Edo Trujillo 🇻🇪👏👍 excelente trabajo exitos cada día más hermano tremendo trabajo lo del complesor de aire excelente exitos

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@romeoyasis3875]

I

[@frelnc]

I love watching these restoration videos. You have so many amazing skills. One thing I think you should consider, is steel toed boots. Don't want you to get hurt. Keep these videos coming!! Once you got that thing cranked over it ran like a top. Awesome!

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@diesel3416]

Complimenti dall'italia Siete bravissimi

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@mpalaskokkalis1476]

Perfect 👌

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@richardbaumeister466]

How did you fix the rust in the air compressor cylinders?

[@william6526]

I don't think he did,for a compressor this size it didn't build very much air pressure. I'd be interested to see how much pressure it will build and hold after running 5 minutes. As rusted as those cylinders were I'm pretty sure it's got blow by issues.

[@richardbaumeister466]

Probably a good thing with those tanks the way they are.... BOOM@@william6526

[@glennfryer1539]

I did not see any honing of the bores, not even any pre lubing

[@CARLOSCONTRERAS-or4ub]

Un saludo afectuoso,para los mejores mecánicos que hay en KZbin...desde CHILE Bendiciones

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@yassinchuwa8824]

Nimeipenda sana hii video ❤

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@yassinchuwa8824]

Don't worry broo!! Pamoja💪💪

[@NguyenQuang-kp5qw]

Con xe tải biển quê e luôn ❤ Xem kênh của các anh rất cuốn nhé. Ủng hộ các anh 👍🏻

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@franciscobenedito3480]

gostei do compressor belo motor gostei passeiro tamo junto valeu

[@restorationsskills4967]

Thank you

[@chawkiaban]

Bonjour de. PARIS. 29. 09. 2024 Ce vieux compresseur depuis combien de temps n a pas fonctionné maintenant en état Neuf BRAVO à vous Vous êtes des GÉNIES

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@abelpadilla7789]

That first part was awesome great work now the second part .

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@franciscobenedito3480]

Belo trabalho passeiro parabéns gostei do vídeo passeiro tamo junto valeu

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@ShahRizan-q3p]

Good job ❤❤❤

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@ShahRizan-q3p]

@@restorationsskills4967 👍👍👍🥰🥰

[@william6526]

I love watching your videos ,no drama just great videos of a person who has great skills working with minimal tools. Your videos are some of the best on any site I watch on utube. But the compressor for its size with 3 cylinders to compress air didn't build up much air pressure.

[@aurelianomamani3676]

No

[@tarkoredmi1763]

😅

[@tarkoredmi1763]

ZiQkRi

[@franciscodossantos9767]

Um belíssimo trabalho parabéns abraços.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@Fold5-xm1qu]

Luar biasa lestorasinya berjalan dgn lancar ,top markotop

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@HoucineAimrane]

very nice videos !

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@BlandongJowo-c4r]

Very good video, I really like it ❤❤❤

[@restorationsskills4967]

Thank you so much

[@johnhart1410]

what engine is that, thank you

[@restorationsskills4967]

Diesel engines are used for many different types of machines

[@Panhhuachan25]

An old machine perfectly restored and working well! Congratulations ! It's great I'd like to see more videos like this !!

[@restorationsskills4967]

Thank you very much. We will try to perfect more products.

[@carlosachicanoy7752]

❤

[@carlosachicanoy7752]

❤❤😂😅

[@haldie94]

This definitely NOT a perfect restoration!!!

[@Desiludido79]

Restauração perfeita coisa nenhum. Muita porrada nos rolamentos novos, parafusos enferrujados e por aí vai

[@ВладимирСеров-д3у]

Просто нет слов. ОДНА СПЛОШНАЯ ХАЛТУРА!!!!!!!!!!!!!!!!!!!

[@2021andriuxa]

Да нормально 😂 По новому подшипнику молотом . Делает на века ...

[@albatecnica3545]

Muito bom. Somente sugestões:: Não se bate diretamente em rolamentos. Brunir camisas dos cilindros motor e compressor... Usar óleo para montar as peças pistões e cilindros. E pra finalizar nas conexões flangeadas das tubulações de ar não se usa fita veda rosca, não tem nenhum efeito. Abraço

[@restorationsskills4967]

Thank you very much. Wishing you and your loved ones good health

[@OlgaTlučhořová]

😊😊

[@bobbyjohnson4734]

GREAT ❤️ JOB MY FRIEND *****

[@marcusvinicius2022]

Brasil

[@gregb76]

Two thumbs up great job.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@Shagnasty]

I always enjoy your videos. This one from start to finish was very interesting. Thanks for sharing looking forward to your next project..

[@restorationsskills4967]

Thank you very much. Wishing you and your loved ones good health

[@Shagnasty]

@@restorationsskills4967thank you for saying that. I wish the same to you and your family.

[@ewertonlimamacedo8310]

Quando ele bateu nos rolamentos com o martelo doeu até meu coração kkk. Use uma chave soquete para fazer isso meu amigo, assim vc bate por igual nos rolamentos.

[@restorationsskills4967]

Thank you very much my friend

[@Tonydeep1222]

Very good🎉

[@PlaneManHehehe]

Are you going to upgrade the better wheels and axles later

[@restorationsskills4967]

Yes. We will upgrade them so they work and move better

[@RaimundoNonatosilva-e1n]

E bom vê esses vídeos de restauração de de motores e de carros

[@restorationsskills4967]

Thank you very much

[@joanlittle4235]

the second part of this video was way over my head. I learned so SO much Thank a bunch Granny 92 USA.

[@restorationsskills4967]

Thank you very much

[@georgewalton-b5s]

nice to see some primmer before top coat of paint

[@restorationsskills4967]

Thank you very much

[@Cunxinh1305]

Congratulations. Hope you release more products🎊🎊

[@beakittelscherz5419]

Why is this specific kind of motor so popular in these countries? They seem to have it in every other machinery, especially agriculture. 🤔

[@restorationsskills4967]

thank you very much. where we live they still use this engine because it is suitable for agriculture here

[@Ismail6235]

Air Compressor Tank should be check and inspected by authorised competent person to ensure that the fitness of the tank are in good working condition to prevent tank explodes if the machine is to be re-used again. Good job man.

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wishing you good health

[@erikvillalonjuarezjuarez3135]

Inpresionante el soldador de metal untrabajo muy bueno 😊

[@restorationsskills4967]

Thank you very much.

[@cecilcooper6210]

Nice Job.

[@restorationsskills4967]

Thank you very much. Wishing you and your loved ones good health

[@abelpadilla7789]

Awesome job on the on welding those parts together

[@valtairantoniomenin1785]

Para fazer uma reforma dessas tem que ter bom conhecimento de mecânica.

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@emilburuiana3997]

New ball bearing monted with hamer, good job!

[@swpo1]

Hey everybody if you think all the beginnings of these videos are fake, Well your right. It's kind of a just imagine walking down the road and in the bush I spotted a whatever it is. Please, we are ready know they are staged. No need to point out the obvious. Its a decent channel. Quit knocking them down for trying to have an imagination already. Thank you. Respectfully.

[@poekya1399]

Wo😮 that’s amazing

[@Sigma33sailor]

Perfectly good way of hammering in new ball bearings.

[@Dinis-e5g]

Belo compressor já nao existe disse restaraudo e uma loucura!

[@eliasmendez511]

Beautifull

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@Markmckwn]

Hats off to you man.. that was a fantastic bit of work you done.. simply outstanding 👏 👌

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@PlaneManHehehe]

You need a sandblaster

[@swpo1]

Go on and buy him one then. You don't think he already knows that by now? It's like huh??

[@ryansibeh9449]

Skill luar biasa

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@cicerolima7410]

The rust is real but the vines are fake, no need to makeup, the guy is skilled. That's all that matters, won my like.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@JowelRanaRana-ge9vz]

@@restorationsskills4967 @ ,

[@rayhewitt4688]

Excellent fix thanks

[@jimthesoundman8641]

13:26 Was this crack due to water freezing in it and expanding?

[@restorationsskills4967]

Thank you very much for your comments. It had been neglected for quite a while and over time it had expanded

[@warren-TeamDLZ]

I have a question for you. What is the name of the spray you use on those persistent old rusty nuts and bolts that refuse to come loose? I've seen you use it in many other videos.

[@restorationsskills4967]

That is Selleys RP7 anti-rust and lubricant spray bottle made in Australia

[@galas455]

Very nicely done.

[@restorationsskills4967]

Thank you very much

[@joaolouvemjunior291]

Parabéns!!Seu trabalho é simplesmente maravilhoso.

[@restorationsskills4967]

Thank you very much my friend

[@VenturiLife]

Using the old bearing to beat in the new one is a good way to go sometimes.

[@restorationsskills4967]

Thank you. That's a good idea too

[@Nepukosweno]

I wish I could be a excellent mechanical engineer like this guys, so mesmerizing” and learning from watching it, amazing ❤😊

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@Nepukosweno]

@@restorationsskills4967 surely I will 😊😇

[@但是呢]

03:08的意義在哪裡

[@restorationsskills4967]

because the old flywheel is very tight and has rusty joints. We tried using vam but it didn't work. We have to close the valve so that the pressure of the valve plus the impact force helps the rust come out

[@bobbyjohnson4734]

YOU MEN AMAZING WORKERS *****

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@d.l.simpkins-ht8vy]

Compared to other restoration videos this guy is toward the top of that list. Yes I would have concern also about the relief valves.

[@cecilcooper6210]

Teflon tape not needed on a tapered joint.

[@rollcatt]

Состояние цилиндров не мешало бы оценить с помощью микрометра, похоже компрессор имеет сниженную производительность. Спасибо за интересный ролик!

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wishing you good health

[@Loadrunner67]

какой микрометр, вы чего? Они подшипники молотком забивают, куда им микрометр... Если бы я так работал, меня бы пристрелили давно...

[@wazzazone]

The work was fantastic and your channel is great. The only caution with this compressor would be the pressure relief valves.

[@restorationsskills4967]

Thank you very much. Wishing you and your loved ones good health

[@georgewalton-b5s]

did you flush the tanks out

[@josericardonovais8768]

Belíssimo trabalho 👏🏼👏🏼👏🏼👏🏼🇧🇷

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@brunofdslopes]

serviço porco

[@0745VaclavDubskyMVDr]

Chlapy super práce.

[@restorationsskills4967]

Thank you very much

[@Svarschic-ye8zn]

Восстановить такой агрегат что бы накачать колёса. Простым насосом не пробовали?

[@restorationsskills4967]

it can be used for quite a few things. because its capacity is quite large. we just resurrected it

[@Daryldixon2410]

Estes vídeos são feitos em qual país?

[@reutilps]

Parabens pelo bom trabalho!

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@donnyomandam6557]

Master Chief mechanic 🎉

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@marcusvinicius2022]

Nakarrara takachima😊

[@leongwat1]

once again great job i enjoy your work

[@restorationsskills4967]

Thank you very much

[@PaulTaylor-ko8jy]

Be safe laws and rules

[@restorationsskills4967]

Thank you

[@ブラックホーク-h7v]

凄いけど、ベアリングをあんな感じで叩いて大丈夫なのかな？

[@restorationsskills4967]

Thank you very much. it still works very well

[@DanielFrahm]

Invest in a press so you don't have to beat up the bearings with a hammer.

[@restorationsskills4967]

We are also planning that. Thank you

[@Padanian1]

Learn how to mount bearings

[@restorationsskills4967]

Thank you for your feedback

[@Linkvolum]

Nice

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@cu3355]

👍👍👍👏👏👏

[@nanakofimensah5407]

Classic job done

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@PedroRamirez-yw2gm]

No es la manera de poner los rodamientos, como los puso no va durar mucho tiempo.

[@Karsosangli89]

Di akhir video angin tidak bisa ngisi penuh karena terbuang kembali sekedar saran lebih baik di kasih tambahan check valve untuk mencegah angin keluar kembali melalui kop hisap

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wishing you good health

[@Dixiillin]

Podrian haber cambiado el manometro...

[@restorationsskills4967]

Are not . We found it near the machine

[@herryhere6368]

Waduh parah bearing main gedor aja,ya rusak duluan 😁

[@dienvan1652]

việt nam à

[@restorationsskills4967]

Thank you

[@georgewalton-b5s]

never knock the tab washer over on fly wheel

[@MdBipto]

nice gender bro

[@restorationsskills4967]

Thank you very much. Please follow and support us! Have a good day

[@meshackkemboi9741]

Pls my machine consumes engine oil daily and it's still new but looses alot of oil on crunksharf breather

[@myarmsling]

应该有个喷砂除锈机

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wish you good health.

[@marinomarbun7654]

Mantap

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@Gus_Asphalt_Cowboy]

Inspite of the negative comments. I think .they did a great job! The parts they're hammering on are way tougher than you think.

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@AitkabilTajiev]

I qw w​@@restorationsskills4967

[@bomdiapatodosboanoite3137]

Pior que 5 moro,de lona é muito caro.

[@JDLarge]

Great clean up and reassemble job, but c’mon guys. That’s a full workshop compressor, surely you could have run some heavier hose and a one inch impact on a few huge rusted truck lug nuts to give it a workout?! It’s a little big to be using to fill up tires or soccer balls isn’t it? I’ll give you one 👍🏼 for the restoration, but you’d have to prove it’s worth for the other one😉

[@restorationsskills4967]

Thank you very much . Please always follow and support us!

[@daronsteele7976]

That is the prettiest boat anchor I have ever seen. Please remove oil and fuel befor useing.

[@restorationsskills4967]

Thank you very much. Please follow and support us!

[@Overwatch7727]

Should have used new E- blow off valves for safety.

[@restorationsskills4967]

Thank you for your feedback so we can improve future products. Wishing you good health

[@billfry5513]

Cylinder sleeves on well used air compressors(or ones sitting out in the weather for 25 years) are always the first to get worn(or rusted) and cause little air compression, maybe new rings on the pistons will hold for a few uses but not for long.Why not just get them bored out at a machine shop if you're going to all this trouble. I call this guy the paint mechanic,make it look pretty and it fixes any piece of junk!!

[@tonto8029]

Those poor bearings, that was painful to watch

[@hoaithanhnguyen4348]

Ráp xì ron bình nước rồi.