Restoring An ABANDONED BMW E36 M3 Bought at Auction! | MAD DETAILING

Restoring An ABANDONED BMW E36 M3 Bought at Auction | MAD DETAILING
I bought this 1998 BMW E36 from the auction 2 years ago. And 3 months into the restoration I still never received the title, after 2 years I finally have the title and its time to finally finish this restoration and get this BMW M3 back on the road! #barnfind #bmwe36 #restoration
Shop MADDETAILING Products! www.maddetailingusa.com
New Ceramic Spray Sealant: bit.ly/3idJhsx
NEW DETAIL BRUSH KIT: bit.ly/3tMUvYA
XTREME APC : bit.ly/35tJgdH
MAD ACID: bit.ly/3ndjJLu
Interior Dressing: bit.ly/3k3jvp9
Products Used:
Steamer: amzn.to/2UnnNg6
Carpet Cleaner : bit.ly/35tJgdH
Leather Cleaner : bit.ly/38DverQ
Leather Conditioner : bit.ly/3ppVLyu
Tire Cleaner : bit.ly/35tJgdH
Algae pre-rinse : bit.ly/35tJgdH
Car shampoo : bit.ly/3nWbfd6
Wheel Cleaner : bit.ly/3ndjJLu
Tire/Trim Gel : bit.ly/3k3jvp9
Pressure washer : amzn.to/32yOC5p
HD Speed : amzn.to/38CBfoo
Drill Brushes : amzn.to/3ltytFC
Pet Hair : amzn.to/3niA6Xn
Black Nitrile Gloves : amzn.to/3nbVZaG
Foam Cannon : amzn.to/36vPLfe
Rupes Polisher : amzn.to/3pmadaX
Wheel Brushes:
Tire Brush : amzn.to/32zmiQg
Wheel Brush : amzn.to/32E6USL
DISCLAIMER: Due to factors beyond the control of MAD Detailing, (Foster Mills), we cannot guarantee against improper use or unauthorized modifications of this information. MAD Detailing, (Foster) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. MAD Detailing, (Foster) recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to the factors beyond the control MAD Detailing (Foster) no information contained in this video shall create and expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MAD Detailing,
#maddetailing #thedetailgeek #detailgeek #carcleaning #cardetailing #powerwashing #ammonyc #stauffergarage #wddetailing #autodetailing #disasterdetail #detailing #interiorcarcleaning #carcleaning #interiordetail #filthycardetailin

[@Tim.Stotelmeyer.2984]

The amount of dirt hiding behind the rear lights at 5:02... When I detailed the outside of my elderly neighbor's car last summer it was amazing the amount of dirt that was coming from under the rear light assemblies just from using the pressure washer.

[@corybrown7251]

One of the best looking cars of all time

[@tmdillon1969]

Hickman! There used to be a top-notch trailer company on Hickman Circle. I bought quite a lot of stuff from them. And the irrigation place on Hickman Drive is excellent if you have a yard irrigation system and the folks at Lowe's are stumped.

[@ericandholly]

Glad to hear I'm not the only one who does thing by trial and error 😂. Happy I got my diploma at KZbin University

[@rochellealexander8271]

For Teal though! I do that too! LOL And honestly this was one of the most satisfying videos I have ever seen!

[@ReightForce]

Amazing content! The project started hopeful, but ended a little bit different. It would be great to see the M3 getting restored completely, because she deserves it. I can’t wait for the next part! Once again, truly amazing to see this kind of content on your channel, it’s next level! 😁

[@paulmc2925]

E36 m3 going up in value by the day , well worth a refurb

[@anthonysabino7084]

Amazing work M A D Detailing

[@ricekava84]

I really enjoy this video. It’s the same while being different at the same time. Great job!

[@RATADATUAVELHA]

wonderful man! looking forward to see it finished.

[@virgilkennedy6692]

You did more than I would have attempted, great job.

[@josephrottina1901]

Can’t wait to see the final product brother.👍🏻🇺🇸

[@gveloso02]

Hi I was wondering how do you deal with body aches or back pain after cleaning cars?

[@lalalo3232]

This a detailing channel not a doctor mate

[@user-pg3yg7id1z]

@@lalalo3232 😭😭😭

[@adamhornby6108]

Clearly @lalalo3232 youve clearly never detailed anything in your life

[@ithinkweregoingtoneedabigg8525]

Stay in shape outside of work. Make sure to stretch and eat right. Drink plenty of water for recovery. The aches and pains exist. All you can do is equip your body to deal with added stress and recovery.

[@katiecannon8186]

@@lalalo3232 Lol.

[@mintii4457]

Great video! I can't wait to see the next part! :)

[@pauldickson1]

Hey Foster, how did the M3 turn out? Would be good to see the end results of all your hard work in preparing it for the colour.

[@WadapKrille]

Looking forward to the next episode!

[@motocraze6602]

Where's part 2??

[@nautospavn]

Always great videos..... and excellent work ✌🏾💪🏾

[@smotheredhusky]

PLEASE MORE E36 M3 CONTENT!!

[@niresh777]

best m3 ever made

[@henryhooker3282]

I live in FL any chance I can just go to where you are at and buy 2 gal of extreme apc?

[@joe.olivet]

Nice. Looking forward to the next video. 👊🏻😎🔨

[@jeraldnoles8714]

Can't wait to see the outcome

[@kaylenortiz0427]

Mistakes help you learn! You just have to be okay with making them, and then ACTUALLY learn from them!

[@pierremartin1118]

You had the holy grail of e36 colors and swapped it for dam white my gawd .. good thing it was a 4door lol

[@ozzienH]

That was just primer...... its still blue lmfao

[@ScrappersDetailing]

Sweet car!

[@GRBmusicPR]

Where's part 2?

[@jaijw5]

Can't wait to see part 2 and how it looks when you are done!

[@a.b.r.a.h.a.m_18]

Probably in a few months

[@jacobeparsels9251]

Is there any prep work or tips for doing the engine bay? I am reluctant to pressure wash it because I have had a problem before with a engine because it was pressure washed I had to pull distributor caps off and dry everything really good with an air hose and that seemed to fix the problem

[@kevinmeraz1566]

I missed it the days when you used to post every Thursday 😪

[@jimgerock9190]

Nice M3/4/5!

[@ChrisMtaani]

Still waiting for part 2, ninety years later

[@feelmysonicboom4177]

You should change to m.a.d. extreme detailing!!! Awesome dude!! UR the BEST!!! HANDS DOWN!!! Detail Geek who?!!! Lol

[@mohamedzulkifly8966]

Looks like Damascus steel design after you sand it.

[@angelalane1307]

Is there some sort of etching primer for automotive application? This product exists in the home painting business, it would be very useful, after you JUST SAND DOWN THE TOP COAT, then use an etching primer to remove and resurface the majority of the base paint.

[@santhiyakumar1662]

Pls upload interior detailing with more foammmmmmmmmm

[@saviosavio3497]

be organic, be real, always

[@Milonika88]

But it is not finished! Will u post the dinished version?

[@showtim3]

WHERE THE HELL ARE THESE GUYS FINDING LUCK FINDING ABANDONED SNAZZY CAR? DAYUM

[@JensaRahm]

Kinda my dream to find a barnfind or abandoned car like this. Even if it is a project

[@brandonb88]

Get rid of those yellow fog lights and that thing would be perfect

[@AIR.METALIC]

😃 wow😍 wow😀

[@Jomeze]

Nice!

[@BlueHatGirlCarWash-ASMR]

❤

[@derrickcordick1315]

Now that's how you paint correct lol

[@MADDETAILING]

Facts

[@mazzoa7215]

Part 2?

[@KiloKaze]

Soooo much work bruh 💪🏽👍🏽

[@BlueHatGirlCarWash-ASMR]

You are the best, professional✌️❤️🧢

[@Youhtube890]

I get why you said you sanded too much but think of it like this you removed as much of the old paint as you could will give you way better results on a restoration level ❤

[@yxnghamza2083]

How do you know when to stop sanding

[@Youhtube890]

@@yxnghamza2083 least aggressive first and increase the grit as needed

[@Misrabelle]

Auto paint stripper would have been way quicker on the bonnet and roof. Paint it on with a brush and scrape the bubbled paint off.

[@petermercer5968]

Interesting

[@ketziannyvazquez8248]

I wanna see a Honda accord 2022

[@gtitddirty2146]

part 2?????

[@M.Arbogast]

That’s the only way I learned mess up and figure it out!

[@07bluelbz]

Enjoyed seeing the car painted. One thing I am curious about. Have you ever thought about a wall mounted pressure washer? Seems like it would be super handy for your business.

[@MADDETAILING]

I have one. This video was filmed 2 years ago.

[@07bluelbz]

@M.A.D. DETAILING what setup do you have? I'm sure you use the heck out of it so I'd like to hear a review on what you have. Maybe a future video ?

[@gigachadmemes4727]

Who else would drink the extractor juice? ME! YUM😋😋

[@Nakedbilove408]

I love & missed Dat car

[@NextLevelLuxury1]

Where are you located I grew up in deltona I've been watching you for a few years and never knew you were that close

[@MADDETAILING]

We are located in debary.

[@dmase70]

Sanding is hard work, Since you took it down to bare metal in a lot of spots anyways...Sand blasting the whole car would have been easier and less time consuming. But bless you for doing what you did, Cause that ain't easy work at all.

[@hashemjamalzadeh9865]

Love your videos man but thus one was painful to watch.

[@zkramez]

I don’t think you sanded too far at all. You need to get all imperfections off. As long as you put epoxy primer on the bare metal you’re good man.

[@awarta1]

Not gonna lie, watching the sanding process really hurt lol

[@jonathanellis9880]

Yessir

[@mlgmounted9599]

car looks like it was out of the factory yesterday

[@amberallen4181]

Where is the interior video, have you post it yet

[@5starempire868]

No roasting from me.......I am no painter or body work guy, I do things free hand. This year I'm going to wet sand the front of my car and spray paint it gloss black. So all I can say is, with practice comes experience, with experience comes better work. So kudos to you for doing it and learning as you go!! 💯💯💯💯

[@heavyizthacrown-5842]

Where’s part 2?????

[@vikassm]

Genuine question: Would it be more effective and/or more convenient to remove one wheel, clean the wheel/tyre/wheel well, fit it back, rinse, wash and repeat (no pun intended) 🤣

[@updaon]

Dude! Never put anything on the bare metal except of epoxy primer… this will Come off!

[@unitedpro_]

????? But there was nothing else but primer put on the car. what

[@ICUCUTI]

How do you keep track of all those parts, so they go back where they belong….ooops we have a few extra bolts after you put it back together 😝🤣?

[@jameslee1374]

Heh man, great video i wanted an e36 for a long time but after driving an e46 330i, i dont thinkni can live with a non m e36 power wise . But why didnt u just towed pr take the risk bringing the car bXk home and havebthe windows rolled up. Just trying to understand why would someone have a mint interior go to waste even tho u might have nkt got the title but im sure u were piss for to long and didng think youll get the car on the rd.

[@logan8844]

alot of the links in the description dont work. FYI

[@robertpintaric1033]

Me as a German, see how paint is sanded away even though parts such as windows and door handles are still attached, I am speechless .. .ajajajaj and uff - good luck for your project - greetings

[@BastianKH]

German here too. Thought exactly the same. And they're called super professionals. Then I don't wanna see the unprofessionals.😂

[@lucasgiraldo9429]

Damn. To the Bear metal.. aishh

[@henningpieterjordan7416]

No real m 3...its a328 i with m3parts....😮😊

[@MrChuckwagon55]

What kind of pressure washer do you use? Why won’t you say?

[@SH-sc9or]

That's indeed way too much sanding. Though I love your video. But I guess I'm a little bit biased, because I've got the exact same car (321hp European version), in the same color.

[@ggl8894]

31:20 music?

[@evanowens5321]

What up!!!

[@francoisbouchard602]

Good.jop 😃😃😃👍👍👍👏👏👏

[@jorgecalderon3775]

La preparación y el empapelado del coche para pintar,,,,, es una grandísima mierda!!!!!!!!!!

[@jockosboy17]

Not that you didn't go to far... Some areas on the car had been previously repair and were showing that it was poorly painting. At a minimum they would have needed sanded down. I wouldn't say you did anything wrong in regards to the sanding you just did a bit more than what was needed on some areas.

[@Smil3ycodm]

Upgrade it😅

[@joeschmoe6908]

I'm certainly no more of a painter than you, but dang. You could've saved a lot of time with a flap disc and an angle grinder .

[@matkobosko2137]

Yes, I finally got an e36 from the second plan!

[@darksideXLable]

should have just foiled th windows ??

[@garyjackson9641]

He could have filed for a new title if he could provide documentation where and when he purchased the car.

[@locked01]

Ah-ehm... wasn't "detailing" all about uotracleaning? This car has been literally stripped off its original paint and repainted 😮

[@sheilamoffitt]

🐊⁉️🤪

[@jasonpinkerton]

Kinda makes me sick when people feel like they need to rip doughnuts in these classic e36s

[@physics77guy]

i would have just got it wrapped

[@MADDETAILING]

No way. Wraps are trash especially on a e36 m3

[@wawa168]

Please keep the same color

[@mcdr15]

If you were going to take the car to the bare metal you should of just went ahead and used airplane stripper & saved the time wasted with all that sanding

[@chrisleech333]

Shame its a 4 door

[@MADDETAILING]

I wanted a 4 door

[@Rogergkh]

No interior detailing 😢

[@MADDETAILING]

At the beginning of the video I explained everything.

[@slimsampy4764]

Dude WHYYYYYY!!!! That paint didn’t do nothing to you 😂😂😂. Why you just left the car outside with the windows open? You still could’ve sold it some kind of way right? I know in Houston it many people that would have bought that car lost titles or not.

[@seang3538]

You said the interior was MINT but now needs to be fully restored? What happened to it? It's got tears and looks like shit.

[@MADDETAILING]

Sat for a long time outside with the windows down made all the interior brittle and ripped.

[@FLiPpiNpRidE]

so basically most of the car is done just using APC

[@MADDETAILING]

I think I used APC on the tires and fender wells and that’s it 😂

[@lukelambert4595]

You’re so stupid for not knowing how to do body work 😡. Lol, don’t beat yourself up brother. You’re living the dream getting to learn on your awesome e36. You are an awesome detailer and I’ll bet you are going to be a great painter for a guy with no experience. Keep up the good work and thanks for the consistently great content.

[@dyyylllaannn]

So we basically trashed a beautiful M3, gave it a shitty paint job and then let it rot in your shop, cool. I want my view back. Where's Part 2?

[@lamarasamuel]

🤦🏾‍♂

[@ComputerTechNL]

Pffffff