Restoring an Atari 2600 JR Retro Console Restoration and Modification - ASMR

[@JREone]

Superb job. Great workmanship love the new graphic on it makes it look more modern. 👍👍👍👍👍

[@cooldudeimr]

Those games brought back so many childhood memories.. Thank you 👍

[@Home8590-d4g]

برافوا عليك إنت أستاذ 👍👍

[@jeroenvanlier8795]

nostalgie.............of hoe je dat schrijft.😀

[@patriciafortesrigos2620]

Adorei essa restauração desse Atari que eu não conhecia .

[@samuraytommy5301]

Me encanta 💖 este forma de hacer videos es excelente y con la la información........gracias

[@skins4thewin]

How come you used a different top plastic part for the system? Was it not possible to save the metal plate on the original? Is there no way to reduce/remove the scratches from it?

[@Daniel-cu8gj]

immortal motherboard 😍great work

[@tribblebooth1224]

Superb, excellent!

[@re-fix9678]

nice👌👌

[@bernardoharo3123]

Yo tuve un atari igual y tenía juegos integrados ya

[@davidcantrell3449]

The cheat I’ve used for years on getting a 2600 to work on any tv with a cable input….. the NES tv cable that screws into the cable in on a tv. It fits right on the Atari board and works a lot better and usually cheaper than anything else you can do

[@luizalbertorodrigues4560]

Perfect jop Congratulations you the best Sensational

[@ratodefliperama1740]

sensaciona ! Mais um mostro de volta a vida likeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[@marcosrodrigues9415]

Chique show 👍👍 tmj Mestre!!!!!

[@davidgorman4468]

you are absolutely amazing !!

[@Tom-zq7lu]

VERY VERY BEST ok restauration ok 👍🤗

[@AlTalawat]

Fantastic restoration bro

[@damiank8591]

Piękna robota 👍

[@Miles117-s1y]

Wow wow wow enjoy your streams Too bad you’re not in New York City I have a 360 with the ring of death keep up the good work

[@Xbxone]

I loved this movie

[@НиколайИванов-м2о]

Good Job!!!🙂

[@ابوالجودالمحمدي-ز4ض]

اكثر شيء كيف تعمل اجهزه بحرس واهتمام وشكرا على مقاطعك الفيديو تنزل مقاطع فيديو اكثر كل اسبوع

[@MrGnomerdoom]

This keeps amazing me, your skill's sir, wow 😀

[@carloscebrianogarcia7040]

No me canso de ver tus trabajos,eres un auténtico crack, felicidades 💪🏻💪🏻💪🏻💪🏻

[@wagnerschiavon5155]

*Awesome Vídeo Dear Brother Restoration EG... Good Repair of Atari 2600 Console!!! Super Big Thumbs Up... We are Together!!!* 😎😁😀📱💁🏻‍♂️🎯🎥🎬🎮🕹👨‍🔧🧤💦💿📼🛠👊✌👍

[@RestorationVideo]

Another masterpiece! Such a pleasure to watch! Thank you 💕

[@carrestore]

Good Job 😍👍

[@michaelschneider8667]

You soldered C137 wrong. It's twisted. So C137 could at worsed blow up. Nice restoration.

[@Моментымоейжизни-й5ю]

Ты самый лучший блоггер на Ютубе здоровья тоим близким 👍💪👍👍💪

[@jaeger4839]

Awesome Restoration посмотри ещё. Тоже классно делает реставрации

[@alankerley983]

top, ficou novinho

[@RestorationAustralia]

super😊

[@Israelcastromartinez]

Tendras la consola mitsuit de 121 juegos ?

[@ابوالجودالمحمدي-ز4ض]

ليش ما عم شوف تتصليح اجهزه سوني 4 او 5 انت ماهر بتصليح لانه كل اجزع عم نشوفها عندك قديمه في قنوات اجهزه حديثه وشكرا نزل مقاطع فيديو بشكل اكثر وتستاهل عشره لايك على مقاطعك الفيديو👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@klopferator]

8:58 You soldered C37 the wrong way around. Otherwise nice restoration/mod.

[@maximilianoatencio]

I have nothing else to tell you! YOU ARE THE KING OF KINGS OF RETRO CONSOLE RESTORATION!

[@justinedwardvaliente3796]

Sa susunod na Video, ay LG 1998 21 inch Color TV salamat!!!

[@Matze_Supercomputer]

@ 14:50. Whats the name of the game ?

[@blackmetal-js6pv]

hermosa consola la tuve el año 87 para navidad

[@jeffclydecainong2444]

WOW 🎉🎉🎉🎉🎉🎉🎉

[@zakiwahranii6347]

Ya7srah kan 3andi wa7ed kifah les 1980s l cover lowel l'original atari 2600 jr .. liyam jamais tweli :(

[@resEG]

Thanks for the visit

[@RenatoBS]

this is the same video from march

[@تسلمايدك-د9ذ]

جميل جدا

[@carioca3154]

Me desculpe a sinceridade mas que pintura mais porca, as chapa de metal ficaram toda borradas de tinta de resto ficou bom.

[@laithalsaedy1396]

You didn’t show how do you know that parts bad and change them

[@juancarloslopezrodrtiguez4787]

Espectacular me quito el sombrero, me ha encantado la restauración, si señor lo has vuelto a hacer de nuevo. Necesitamos gente como tú.

[@Yaver_Usta]

I also try make restoration videos like this, in my channel

[@davidcantrell3449]

Basically plug and play as the kids say

[@supa137]

It would be awesome if you paint the Atari with the blackest black paint. The brand coloring will look insane with that type of background color.

[@madmax2069]

It would be far better if you don't paint it, just use some of that car trim restorer.

[@madmax2069]

@@nothere4089 well you definitely want to make sure it's as clean as you can get it before you do anything like that (which he clearly didn't do in the video) which is why it looked as faded as it did. You clean it very well, do this multiple times and rinse after every time and inspect to make sure you got everything (it's also best to pop the switch panel off the top case before you start cleaning, they pop out), you don't want to polish it as polishing it would wear down the textured surface, and you definitely do not want to paint the case.

[@madmax2069]

@@nothere4089 here a video of a 6 switch Atari VCS/2600 that's all in parts and they show and talk about products used for restoration kzbin.info/www/bejne/p6nJk3uGabGgh9k

[@mjr1013]

Salve

[@skins4thewin]

Great video! Only thing I'll say that could be an issue is those AV wires are needlessly long & could promote interference. I've ran into this very problem when doing both composite & S-Video mods on the Jr. I'll be surprised if there's no interference in that Composite signal.

[@skins4thewin]

I am still so afraid to get water anywhere near my old electronics. I still don't know how this doesn't short anything out. I've even heard of ppl just throwing their boards into the washing machine with no issue. Can someone explain how this doesn't destroy electronics?

[@RimFaxxe]

Because it's fake and nobody abuses electronics like that

[@skins4thewin]

@@RimFaxxe Lol it's fake? What are you talking about?

[@RimFaxxe]

@@skins4thewin people don't throw motherboards into water, those "restoring videos" you probably saw are already known to be fake and it's the people actually destroying a console but the video is reversed Motherboards are not waterproof

[@skins4thewin]

@@RimFaxxe 🤣🤣 So you're saying this channel has been fake all this time? Where is this evidence about these videos being fake? I'd like to see it.

[@RimFaxxe]

@@skins4thewin not this channel goddamnit

[@jcmundoeletronico3320]

✌️😀🇧🇷👍🙂

[@ابوالجودالمحمدي-ز4ض]

واتمنى تصلح اجهزه للسوني 4 او سوني 5 او اكس بوكس كل اجيال

[@simoplay29]

I Remember watching this video One year ago¿

[@Rob_M_jr]

I could be wrong, but It looks like the small capacitor you replaced on the left side of the board got put in backwards. Just curious if that is actually the case.

[@Rob_M_jr]

@madmax2069 watch it again, the board is clearly marked with a "+" and the negative stripe is on that side. All of the rest of the small cap locations have the same mark on the board for positive, and are positioned correctly.

[@jdana4878]

Where do you find these? Buried under ground?

[@gustavotecnologia]

Arrume um psp. Translation: get a psp

[@martinlunahernan29]

Si te mando una computadora cuánto me cobras

[@dko3467]

Donde consigo ese estuche de herramientas que tienes ?

[@2바이오]

Sl아타리2600샤워

[@martinlunahernan29]

Por repararla

[@skateboard_sandwich]

All that repair work and Tennis still plays too fast. (Ah, I'm kiddin', this is great!)

[@phborin]

I know it's a simple console and shouldn't generate so much heat, but painting a metal plate that acts on statistical protection and heat dissipation doesn't make it lose efficiency.

[@MikeL-FL]

The proper thing to do would have been to nickel plate them. He didn’t seem to care much about this console though. Even when he was tearing it down he wasn’t being careful or anything. The way he bent the ribbon cable for the switches made me cringe.

[@madmax2069]

That's only an RF shield, it does nothing to dissipate heat, those chips don't get hot enough, plus the chips would need to be in direct contact with it to be able to dissipate heat. And painting the RF shield really doesn't harm its capabilities of RF rejection.

[@madmax2069]

@@nothere4089 yes you can really do that, many people that repair electronics do wash the board, especially if it's really sticky and dirty (although they use distilled water due to its lack of minerals in the water). As long as the board has no power going through it you can dunk it into water (I do use tap water, I just make sure to brush everything off when I apply IPA which dislodges most of the minerals that in the tap water), and use IPA to displace any left over water so that it dries faster, or you can use a heat gun.

[@madmax2069]

@@nothere4089 here's a video of a real repair kzbin.info/www/bejne/rl7GeGaueNKDbac

[@RBKing80]

Fake restoration like all of the videos.

[@drizztdourden666]

Thank god for modern gaming,back then I would had been bored out of my mind.

[@drizztdourden666]

@@madmax2069 your guarantee is wrong since i was alive back then & I did played atari games but obviously modern games are better(age is irrelevant since everyone from any age group likes different things)these are facts.

[@andrey77014]

Atari Kushanashvili