One option for deep scratches is clear UV setting resin. I’ve had some success with that - as long as it can fully penetrate into the scratch so that no air bubbles form. Alternatively, the remaining scratches can be ‘celebrated’ - like the lines on an ageing face that tell of a life well-led!
@Woodys_Hobbies2 жыл бұрын
Thank you for the info.
@davidbatley93862 жыл бұрын
I've had good results filling deep scratches with epoxy resin and finishing the surface in the same way as you
@Woodys_Hobbies2 жыл бұрын
Thanks for the info.
@ericwong3096 Жыл бұрын
Nice work. I’m trying to restore a BSE Fisher turntable. It’s in working condition but still needs a few fixes. Like the dust cover.
@Woodys_Hobbies Жыл бұрын
You can do it! Good Luck!!!
@ericwong3096 Жыл бұрын
@@Woodys_Hobbies or padala ko na lang sa inyo. Haha. Thanks sir.
@Woodys_Hobbies Жыл бұрын
@@ericwong3096 madali lang po ang pagpolish sir may mga link ako sa video na to check lang ang description box. At kailangan may maghawag sa dust cover para hindi lilipad ang dust cover.
@atomartmatter5970Ай бұрын
Congratulations on your work. I have had one since 2005, and I am very happy, despite the price range it sounds great even compared to other more performing turntables (on paper). Precisely because I use it so much, I wanted to ask you if the stylus can be replaced. Thanks
@Woodys_HobbiesАй бұрын
The stylus can be replace with Rega carbon, Audio technica at-3600, Sony and Aiwa but I forgot the model.
@atomartmatter5970Ай бұрын
@@Woodys_Hobbies Thank you!
@victorrc57832 ай бұрын
Que buen sonido! Lindo trabajo
@Woodys_Hobbies2 ай бұрын
Tnx 😊
@dsmowday9 ай бұрын
I have one of these, everything works but when you hit the start button for autoplay the arm moves about 10 seconds into the start of the first song, is there something i can adjust to make it land closer to the edge of the record?
@Woodys_Hobbies9 ай бұрын
Check the bottom of this turntable find the hole with a mark "L in" it means lead in you can adjust here the landing of your turntable use a flat screw drive. This is trial and error to adjust. It means turn right or left a little then check the landing until you get your desired landing.
@chandrakant1479 Жыл бұрын
This turntable has fixed RCA cables. How easy is it to replace that?
@Woodys_Hobbies Жыл бұрын
If you like to make a detachable cable is very simple. Cut the rca cable at the end of the turntable casing drill two holes to mount two rca jacks in the plastic casing. Solder the remaining wires attached in the turntable to the rca jack now you have an rca phono out.