Рет қаралды 22,741
A few hints on paint stripping and re-painting machine tool parts. These are typically cast iron items with natural surface roughness. Consequently they are not worked all the same as in a typical car body paint job. Also I comment on the consumables I use, like paint cups, abrasives, etc.
Products used in the video:
Fill primer: Autocolor AP-Merit 7520 HS 2-component (with brush: no thinner; with spray gun: thinner added)
Abrasive: 3M Xtract 710W, 240 grit and 320 grit, 150mm dia. pads
Cups: SATA RPS 0.3 liter
Spray gun: SATA MiniJet with 1.0mm nozzle
Paint: Spies Hecker Permasolid 275, color code RAL 7012 basalt grey
00:12 Intro
03:57 Paint stripping
06:49 Cleaning the casting
08:24 1st Masking
11:25 Filler step 1
22:23 Filler step 2
29:28 Mixing paint
34:03 Painting