Restoring the engine of the beast (part 1)

Finally making some progress on rebuilding the 38,8 liters V12 Norinco diesel engine out of our Iraqi Type 69-II tank.
Technical components: www.indi.nl
▼Click here for more!▼
This type of engine is also known as;
kharkiv v2
v55
transmash
Behind the scenes & more?
Check out our 2nd channel; Werkplaatsvlog
Follow me on:
Facebook: / mastermilo82
Instagram: / mastermilo82
Merchandise: shop.spreadshi...
Website: mastermilo.com

[@mastermilo82]

Hey folks, all video's on the main channel contain footage of the 'Werkplaatsvlog' channel. That's because that channel has almost all raw footage & more behind the scenes footage. The video's on 'Werkplaatsvlog' have a delay of one week on the actual record date at the moment. But we want to get it more up to date, so we can react faster in the videos on comments. Ha mensen, alle video's op het hoofdkanaal bevatten beelden die ook op het 'Werkplaatsvlog' kanaal te zien zijn. Dat komt omdat dat kanaal de ruwe beelden bevat & achter de schermen beelden. De video's op het 'Werkplaatsvlog' kanaal lopen momenteel ongeveer een week achter op de opname datum. Maar we willen dit meer gelijk trekken, zodat we sneller in video's kunnen reageren op comments.

[@XavierAncarno]

I love Werkplaatsvlog channel... more details on the daily routine work. A smaller temporal delay would be cool. Greetings from France 🇫🇷

[@ras7348]

good, i watch the videos on werkplaatsvlog as soon as they come out even if i dont understand amything :D

[@quintenlievaart5952]

Maak een nieuwe intro met de tank erbij

[@brmbrm101]

Please, add English subtitles for your secondary blog too. I'm still waiting for weeks old videos to be translated to finally figure out, whats happening with your tank :,(

[@iamtheomega]

If you guys start that I won't know whether to shit or go blind.

[@nefarious_0969]

Milo in 2009: i created junk from a thing. Milo in 2019: I created thing from a junk.

[@digobudding2889]

Hahahah yeah that is right

[@federico5370]

We are here since the beginning to see him rise!

[@eamh2002]

Future episodes: Can you shift a tank in reverse at full speed

[@pilot554]

Or weld bars and make RollTank xD

[@huisbaasbob9844]

Wiptank

[@MrDemonchild71]

Will my tank run on fabric softener and pancake syrup

[@huisbaasbob9844]

@@MrDemonchild71 Tank engine running on WD40 and paint the tank in the WD40 can colour

[@eamh2002]

@@pilot554 that would break youtube

[@jonascaes1085]

liked just because you kept your video 9:56 and not 10:01 with 6 adds in the middle

[@hoineenietjij3331]

yea but if he does it its oke he deserve the money

[@Edje666]

Or you can download uBlock origin. No more ads! :D

[@muhammadsuryaarbi5568]

@@Edje666 support him restoring a tank are not cheap

[@Edje666]

@@muhammadsuryaarbi5568 For sure! But as long as there are enough views the ads don't matter. And I view it

[@ras7348]

also i wouldn't mind if he put ads, his content isn't clickbait or 90% filler like most of other mechanic channels do, he deserves it

[@michaelmaher8091]

Don't understand your language, but you have big balls taking on a massive project like that. Great work. You have brought history back to life . Not the best history but history none the less.

[@memadmax69]

I cant understand almost every word you are saying but: The universal language of your engine coming together beautifully is there lol

[@Chris__K]

I'm really looking forward to see this engine running 👍

[@TheEduardo90]

Just the engine?? I want to see the whole tank running again!!

[@cameronjenkins6748]

Despite the fact that I can't understand a single thing you guys say without the captions, your channel is one of my favorites.

[@yoyodu6921]

I saw Diesel?? Forever brave dog! Good job buddies..

[@andypdq]

I like the gear driven timing, much better than crappy belts or chains.

[@Dirkvnh]

andypdq But gear driven cam’s will decrease it’s mileage by like 0.2% so the efficiency rating will drop at least 5 labels.

[@TYSuggested]

Still very common on industrial diesel engines.

[@sasjadevries]

Russian ZMZ53based engines, and all Russian UMZ engines have 2 gears in stead of the belt... One gear on the crank, the other on the camshaft and you're done. The benefit of this is that if your gear is worn out you will hear is long before it's too late, and you have enough time to replace it during your next week/month.

[@Norman92151]

Amazing. Lots of aluminum components on this diesel.

[@bingbing-ti2rv]

I'm so impatient to see the final rebuilding episode of this engine

[@ZwamTekMusic]

eigenlijk is het gewoon SUUUPER gaaf dat jullie zoeen stukje geschiedenis herstellen... Ik vind geschiedenis altijd super boeiend, en het maakt wie wij allen nu zijn.... Prachtig werk!!!

[@DoggoRides]

0:30 DIESEL!

[@sysierius]

Doggo rip

[@frankwizard77]

inderdaad dacht ik ook al

[@dointh4198]

Always appreciating rebuilding old and broken machines! Keep up the good work!

[@daanwassink793]

Zo heerlijk hoe jullie dan gewoon lekker rustig aan alles los halen en gewoon lekker nuchter zijn, favoriete serie op yt ♥️👌

[@cannonfodder6654]

hands up who cant wait to see the finished tank rolling out the shed!

[@musica51502]

Maybe it may seem strange, but I miss Diesel. It was not my dog ​​but I loved watching it in the videos playing with the piece of wood. Milo continues to making this videos that we enjoy so much. Cheers from Puerto Rico 00773

[@deantv1189]

Het mooiste stukje van de video is dat ik diesel nog even zag❤️

[@DrentseRedneckOfficieel]

Wat een geduld hebben jullie. Mooi zo doorgaan.

[@corneetje123]

Ja jongens dit heb ik ook al in de werkplaatsvlogs gezien 😂

[@maxmastop1112]

EEstar en toch hebben we het al gezien

[@nosnhoj99]

In this episode we rebuild the tank engine featuring *the worlds noisiest squitry bottle*

[@ras7348]

the noisiest bottle is also the one that holds lubricant inside xD

[@gijs.22]

Door deze videos heb ik altijd een hekel aan vrijdag niet dat ik ze niet leuk vind maar als ik hem af heb gekeken moet ik een week wachten tot the volgende

[@Abb0able]

kzbin.info/door/J0BEW0Jsc8cK0STZlC4zlg

[@plymouthmechanic3423]

Heren goed werk!! Jullie geven mij veel tips & tricks om met mijn eigen project door te gaan. Ook het maken van speciaal gereedschap om onderdelen los te maken heb ik door jullie onder de knie gekregen!

[@yv6eda]

This is a huge project! Enjoy every video... Thanks Milo and the team!

[@TheManLab7]

I'm really looking forward to seeing the heads and block being skimmed and I can't wait to hear it run 😍

[@twocvbloke]

That engine will be one hell of a beast when it's all back together and running... :D

[@dekon70]

Outstanding work you Milo and Dirk!

[@teamidris]

Big Important Thing! A Wooden board to block the air intake if the engine ‘runs away’ on startup :o)

[@jadenhirst9230]

What happens if the air intake isn't blocked and that happens?

[@sasjadevries]

@@jadenhirst9230 Look up diesel engine runaway... KZbin is full of diesel runaway videos, and wikipedia has an article about it. Actually that wooden block sounds like a great idea, I don't think they will replace the piston rings, and they probably won't get this engine too an ideal state, so the risk of a runaway occuring is pretty high for this project.

[@teamidris]

They really rev and either melt or explode :) On rebuilt engines one person would work the starter and fuel and the other had wood block and rag soaked in petrol, depending what it needed :D@@sasjadevries

[@isorukuyamamoto9168]

Gewoon nog een keer. Melasse voor die tracks! Lekker twee weekjes laten weken. Ziet er retegaaf uit, blijf zo doorgana

[@ExploringCabinsandMines]

Wow crazy project !!!! A lot of parts needed for an old engine.

[@Blondid]

This engine going in the opel? 🤔

[@janvandenbos7085]

No this is de tank engine....🤔

[@Blondid]

Jan van den Bos true 😯

[@michaelellis9089]

Please the opens frame wouldn’t support it. It’s dropping right into that yellow toy car

[@arekb5951]

It would be the first front-mid-rear engine car in the world

[@BORIS-bd5ee]

Это двигатель с советского танка Т34

[@muppetpaster]

Milo, ik vind het serieus geweldig wat jullie doen!

[@h4xor1701]

Love this part! Modernize that engine with some new Bosh system xD

[@BuzzardR32]

Now that’s a proper V12

[@scottlittle2008]

You guys are AWESOME!!!!!!! DON'T EVER EVER STOP YAH!!!

[@rubloller4502]

ziet er goed uit man!! ga zo door!

[@mikeandhev]

Excellent job so far on the engine! Well done Milo.

[@jurgenvanzuuk3238]

Oude afleveringen bij elkaar van de werkplaatsvlog 😂✌️

[@maarten8742]

Idd jammer weer

[@maarten8742]

@@MCdrivein ja je wilt ook voorgang zien elke week, maar je hoeft dat niet dubbelop te zien

[@roanv]

​@@maarten8742 Moet je de werkplaatsvlog niet kijken Die is juist bedoelt voor extra unedited spul Gaan ze natuurlijk niet alles daar uitknippen

[@kevinrobben1999]

Volgensmij snap je het principe van het werkplaatvlog kanaal niet?

[@runeE30]

hou van de video's man, vind het ook leuk dat je de video juist onder 10 min hebt gemaakt ! Keap up the good work ; )

[@the_golden_ingot]

Can't wait to hear the Engines roar!

[@mohdzulkiflisamsudin]

The restoration i have waiting for has released.. Tq mastermilo for the video.. Padu boss..

[@AllMightyLee]

Steel and aluminum don't have the same expansion/contraction rate. If you use a heatgun (not a torch) and heat the aluminum around the sleeve, the head will expand and will apply less pressure on the steel sleeve. It is then be easier to remove the sleeve...

[@Jeff3ydb]

Erg gaaf dit om te zien .ga zo door manne

[@LongTimeAgoNL]

JA, dit is de aflevering waar ik op hoopte! Zit toch nog een 2e leven in de motor! VET.

[@gilsonfrois10]

mas que saudade de voces. gosto muito de seus videos .não somem naõ. abraços pra voces.

[@___Ra_Ge___]

Hatseflats! Vet cool hoor deze motorvlog ;) Dit gaat helemaal goed komen. Maare voor nu een heel fijn weekend

[@legokid55454]

I LOVE THIS SO MUCH THIS IS MY DREAM!!! YOU ARE AMAZING MILO

[@dndave5045]

Brabant zal trots op oe zen milo! Ik wel tenminste!

[@stigeon4771]

Absolute madlad! Als je m af hebt zou je een keer bij militracks moeten langskomen met je tank! Zullen veel mensen vast waarderen!

[@casperboekel628]

leipe video weer!!! Ik hoop snel de tank werkend te zien !!

[@richardgonzales4685]

Your videos are fun to watch like the engine teardowns would like to see ya'll do an airplane engine tear down just an idea anyway keep up the good work.

[@hydorah]

Not even watched it yet. But COOL this is what I've been waiting for!

[@coolhanddruid]

Whole lot of work.

[@belgikacorps4255]

Hi, you are Belgian? I’m Belgian I love your videos, I watch your channel since before the fire of your old workshop

[@lowiebovens.]

Nederlander.

[@basspassionguide9089]

Was waiting for this one thanks master milo🔥

[@Gaaaz]

Prachtig werk jongens!

[@sergialasania3020]

fantastic people!

[@lazarus7216]

As always very interesting without understanding a word👍👍

[@HammarixSwe]

Well, turn on the subtitles?

[@lazarus7216]

That would be a good solution👍👍

[@RustyOldF250]

Looks like Sadaam was a bit lax on changing oil!

[@Naerade]

Can't wait to see the next part 🧐

[@ritzevespa]

Ooh dat spuitflesje man... Ik vind het knap als je dit echt goed aan de gang krijgt, succes met de build

[@Razorfish]

Need a crossover video with hydraulic press guy for those cylinder sleeves.

[@francoismorin6806]

Holly shit that amount of work !!

[@howardfulford9406]

great work !

[@arisz2191]

I cant wait to see the result

[@greasysteve5671]

Dual overhead shaft driven camshafts with 4 valves per cylinder... Impressive

[@yeivi1000]

Want to see that engine running!

[@ProjektHeld]

Ohh sehr cool!! Sieht aus wie ein großes Projekt!

[@plymouthmechanic3423]

Yes that was the dog Diesel in the video (r.i.p.). Milo has a new dog called Luka. The guard dog ;)

[@limesmd3573]

Wow ik zie jullie kanaal nu pas. Echt supervet hoor. Ik weet hoeveel werk het is dus echt topwerk👍🏻

[@Jerbod2]

Great stuff!

[@tristanchiu1362]

Smangat om ditunggu tank nya

[@Hfolcher]

vous etes de bons mecanos

[@mxrider2strokebraaap54]

Mooie video!

[@HalvardSkurve]

You should also put the 4 last tank videos on the tank playlist ;)

[@reinardeuser446]

Tlijkt wel zo mooi schoon als nieuw

[@willsonsmith5621]

Well done!!

[@liambrady9852]

A little investment in a vapour blaster and a glass bead blast cabinet would make some short work of restoring a lot of those parts

[@captainzoll3303]

can we call it "thomas the tank engine"?

[@fromhell1]

yes

[@officer-157-]

No

[@matthijsw201]

Beste project!

[@rarbiart]

Milo, can you make a **Roll-Tank** ?

[@marcinzagozdzon1439]

Good job👍

[@DKDrawings]

Amazing

[@rarbiart]

4:30 fighting cylinder liners is still better than liners dropping by it self during run like on the Isuzu-V6 which Opel chose for my Signum.... fatal damage for the block and cylinders.

[@MultiArrie]

failing engines is a trademark of opel.

[@luukscheepers6061]

Mooi vakmanschap🔥

[@turbocompound]

Great work. And the dog is site engineer...😎✌️👍...!

[@janvandenbos7085]

Goed bezig jongens.....

[@btuncelzork]

You guys are awesome, thats a badass engine, what is it?

[@TheCupClub]

Lekker bezig

[@josephsenkobborg]

Hey can you make so that the handbrake is used as the accelerator thanks!

[@jonathanmouveaux6761]

Vous gérez les ga tres bon taf

[@mishaschaafsma977]

Hey master Milo lijkt mij leuke video. om op koeienstront/mest te rijden omdat er veel gas vrij komt Like deze comment voor epische video tnx guys

[@pieterzwaan1121]

😁😁

[@fullmetaljacket7]

I have my doubts that this thing will ever run again.

[@maiquecorreagarcia9854]

AWESOME!!!!

[@selamikaranlk446]

Am here for tank videos.Everday control new videos

[@oke215]

Goed bezig!!

[@riccardosbarra]

I thought you were going to disassemble it completely! Why not?

[@cickx7]

will this fit in my Honda??

[@TheCuriousOrbs]

lads, you need to invest in a dry ice blaster.