[REUPLOAD][OLD SCHOOL][HOW TO] CYMA CM.028 AK-47 DISASSEMBLY - internal review

This is a reupload of the cm.028 disassembly as the previous video ended mid disassembly. Here is the full video of how to disassemble the cm.028 Ak47 and a bit of a review of the internals.
Enjoy, don't forget to like, comment and subscribe!
Pheas
#pheasairsoft #airsoftdisassembly #cyma #cm028

[@trooperodst6880]

My curiosity led me here. So I got a 028s recently quite amazing. Just wanted to see the internals of these Cymas I love well engineered this is. So far the simplycity of these beauties are mind blowing!

[@wayneclarkson7486]

Pheas excellent How To as usual keep up the great work see you on your next vid. Also hope you and your family are staying safe.

[@hector333315]

Just what i needed. A lot of thanks!

[@PheasAirsoft]

You are very welcome! Glad it could help you out! Pheas

[@aperson8847]

Hey pheas! I don't know if you'll remember but awhile back I used this video with my ak to upgrade it and now I'm watching it again because I'm getting into hpa!

[@ryanloynes8528]

Great disassemble pheas 👌🏻👌🏻👍🏻👍🏻

[@Terminatorbart]

Nice disassembly!

[@ageairlangga3006]

thank you. this really help

[@DEADEYEAIRSOFTPH]

Very nice 🙂👍

[@docthorr]

Are the bearings 7mm ? Won't that be a weak point for high speed builds ? Thanks for the quality of your reviews! Definitly subscribing !

[@PheasAirsoft]

Hiya! I can't remember exact size of the bushings, but I thin 7mm sounds right. With the FPS limits we run in the UK it shouldn't be too much trouble for them to handle, I tried to use this at the weekend... the piston stripped before I even got into the first fire fight ha ha ha. So, im just going to go ahead and do all the upgrades and then take it from there. Pheas

[@mr.bullet6087]

Really nicr ak in my opinion

[@toughbama]

Is there a way to replace that nub in the hop up assembly with a maple leave flat nub? I couldn't figure out how to replace it.

[@mr.suolakurkku]

Hey, i was wondering if the little thing on the charging handle that stops it from going further back can be trimmed a little bit? I want to make the charging handle go further back for realism.

[@PleaseComeBack223]

hello, can you please tell me what screws you used in the stock? is it m5*60 or m6*60? I bought a cyma a real wood stock but I didn't have the screws :(

[@besiktas6261]

Beatiful AK 47 ❤️❤️😋😋

[@comradefish9698]

At 4:12 that spring u mentioned didn't come with my gun fault of the sellers of the replica and id have to ship it to Poland to fix it where could I buy that spring

[@gooberius]

Hello. hoping someone knows what screws the stock uses (the screws that keep the stock on the gun) help appreciated.

[@kittypybro8084]

The battery is different on cm 522, is had a different composition

[@Apixdan]

I find myself coming back to this video every few months. This time I notice you said the better quality value is to be found in the cheaper ones (cheaper than cm.028) but most people say the cm.028 is the cheapest you should go.. are the internals really identical in the cm.028 and cheaper models? Would the cm.048 have better internals??

[@PheasAirsoft]

Hello! From more experience of alot more unboxings lately... the cm.048 has slightly better quality, but its more that they have "finished" them better, so less flash marks from models etc. Not really that they are any better built. I do think the Specna lowest price models are better than the cm.028 by some margin now and cheaper (at least in the UK, where a cm.028 is £130 whilst the specna is £109... amazing value) Then you also have double bell now putting out some excellent stuff for silly cheap prices! Pheas

[@Apixdan]

@@PheasAirsoft thanks for the response. Another query I have is would these AK be suitable to have a simple mosfet installed in them, and if so would you have to open the gear box?

[@PheasAirsoft]

@@Apixdan any variety of MOSFETs will go into them, any plug and play one will do nothing to protect the internals, the best ones need to be wired in or they replace the whole trigger block, either of those need the gearbox opening unfortunately. Pheas

[@mridg9464]

Could you review there ST8-non blowback heavy weight gas pistol by STTI

[@PheasAirsoft]

Hiya. Thanks for the suggestion. I will add it to my list to get. Pheas

[@benjycardon3608]

Hey man. Can u show how to shim the de m904g

[@PheasAirsoft]

hiya. Unfortunately I no longer have it, But if I end up with another one to work on then I will do a video on it. Pheas

[@jeffreyorellana9140]

How do you change the firing speed on it? Mine shot at ~360 and I wanted to use it for indoor airsoft. Their speed regulation was 350

[@PheasAirsoft]

Hello! The main spring that comes out of the gearbox, you need to use a "weaker" one of those. You could in theory cut the spring to be shorter and use the same, one, (maybe take 1 coil off it at a time until its the right FPS. Just make sure it doesnt end up too short to fit back into the gearbox (it should still need some compression) to put it back in, otherwise you could end up with all manor of issues. Pheas

[@holdmyclaymore7411]

Just Adjust the hop up down that works too!

[@RadionessYouTube]

Could you try some sort of a weird gun review? Like uhh, Warrior Derringer, spring powered is interesting.

[@PheasAirsoft]

That sounds pretty intersting. I will add it to the list to get hold of. Where have you seen it in stock? Pheas

[@RadionessYouTube]

@@PheasAirsoft Many shops in Czech Republic sell them, I've never seen them in other country e-shops though. I'll try to find it. Rad

[@germanwarrabbit]

do you know any AR stock adapters that can fit on this? wanna make sure before I get one

[@VetrixOfficial]

None, get the CM.028C variant of this, tactical rails and M4 Stock

[@steviegers]

If you still have the Cyma M14 can you do a disassembly video for it please.

[@PheasAirsoft]

Unfortunatley it has long gone. If I end up with another one to work on I will do a video of it. Pheas

[@steviegers]

Cheers m8

[@tobiashugotomasek1622]

Hi do you think that the internals of this gun would be the same in all cyma ak's?

[@PheasAirsoft]

Hello! They will be identical in disassembly etc, but the quality will be slightly better in the higher end Cyma stuff. Pheas

[@tobiashugotomasek1622]

@@PheasAirsoft thanks!

[@15oslin]

Will the m4 stock adapter work on this model?

[@PheasAirsoft]

Hello! If it is the one designed for a folding stock AK, then unfortunately not. Pheas

[@solorioedgar3382]

do you know if the barrel threaded

[@PheasAirsoft]

Hello! Yep! The end of the barrel has the normal 14mm negative thread. Pheas

[@dantae_3408]

Mines started sounding horrible with no bbs firing out and now when i shoot it only does a clicking noise and the battery gets hot.

[@PheasAirsoft]

Hello! IN that case it sounds like something has broken internally. Either one of the gears or the piston. The Heat is from the motor trying to turn over the gearbox but cant because its locked up. You will need to open it up and see what is the problem! Good luck with it! Pheas

[@mikeyfrancisz]

I am very curious if I were to buy a metal body receiver for an AK47 would I be able to use all those parts to swap out the body for metal instead of plastic if ppl understand where I am coming from

[@PheasAirsoft]

Hello! You need to search for a TM spec AK metal body, I think some companies still make them, but they are hard to get hold of. So I would do a bit of google foo and see what you can come up with. Pheas

[@mikeyfrancisz]

@@PheasAirsoft thank you so much for response especially for an old video. I am getting this AK you reviewed here from a friend for free so I was thinking about if that's possible.

[@PheasAirsoft]

@@mikeyfrancisz You are more than welcome, I try to reply to everybody as its important, you guys took time to comment so its important I try to get back to you! Pheas

[@mikeyfrancisz]

@@PheasAirsoft thanks again. You probably don't remember myself but I commented before on your video about an AK74U and asked about mags that fit it. Funny thing this AK47 the mags I have all of them fit 😅, mean while my AK74U by D-boys that's made from real metal and wood is a pain to find mags that fit 😭.

[@PheasAirsoft]

@@mikeyfrancisz I am having similar issues, my cm.028 takes anything, but my Nuprol AK.... absolutely awful with mags! D-day mags seem to be the only ones I have found that fit and feed with no mods needed. Pheas

[@SerbianMonarchist]

How to dissasemble magazine?

[@PheasAirsoft]

Hiya! Thank you for this suggestion, not thought about that as a video, I will add it to the to film list and get it sorted. Pheas

[@DiKambingcorn]

What do you call the casing holding the motor?

[@PheasAirsoft]

It's called a motor cage. Pheas

[@DiKambingcorn]

@@PheasAirsoft thank u

[@jamesblaine4185]

I just put a solid cylinder in my 10 yr old underfold version and it still wont punch through a soda can side point blank with .20s.

[@PheasAirsoft]

Hiya. Thats very bad compression then in the cylinder. Did you try the compression (like I do in the video) ? What weight BBS are you using and what type? It could also be a bad airseal with the hop rubber as well. Pheas.

[@aleksandarkuzmov1221]

What is the nozzle length

[@PheasAirsoft]

Hello, the internet seems to suggest a nozzle length of 19.63mm for AKs. Pheas

[@RichardGuillermo]

why is this video age restricted??? like bruh this guy is just diassembling a airsoft ak47 whats wrong with that?

[@VetrixOfficial]

Yeah how else are the kid militiamen going to use this?

[@rocketscience365]

Can i change this plastic fake wood for real wood?

[@PheasAirsoft]

Yes you can. You will need to find a wood kit but it's not hard to change. Just might need some sanding down. Pheas

[@rocketscience365]

@@PheasAirsoft yes,i know where i can buy this wood kit and when i want i can change plastic body for metal or not?

[@PheasAirsoft]

@@rocketscience365 yes you can, make sure it's the correct type. There are 2 types of AK bodies. TM type and VFC style. This AK needs the TM type of body. Pheas

[@rocketscience365]

@@PheasAirsoft thanks you Pheas

[@rocketscience365]

@@PheasAirsoft and last question what is VFC type its for AK's what have folding stock or?

[@dragos7082]

thanks for breaking my gun

[@trikalos1387]

It looks so fake compared to 040 045 series