REV'IT! Sand 4 H2O Jacket & Pants Review

[@RevZilla]

Questions? Give our gear experts a call at 877.792.9455, or email/chat here: rvz.la/31xnH9M

[@wellsjaxton5570]

Instablaster

[@lagartx3]

What shows is he using in this video?

[@michaelmullen6974]

I’m a 44 chest measurement and can hardly fit in the coat with all the liners in a size large. I would recommend going with the xl size.

[@RandomGRK]

Revit really screwed up the colors of the Sand 4. The Sand 3 colors were just so much better

[@odetteblommesteijn1194]

Yes light color was more neutral and I really liked the blue jacket! Rev’it has spit out more rainbow colored designes this years collection. But I do like the new brown camo and... it’s available for ladies now as well!!

[@seanconnolly4110]

If this came in the same Sand/Black colorway as the Sand 3, I'd be all over it.

[@pradeepmaurya2879]

Exactly my thoughts

[@397coney7]

A lot of manufacturers put out some really bazaar color designs. I’m no fashion expert, but they are weird to me. This one black, grey, blue and red……$500.00…….uh no.

[@keenwai]

Thank you for the great review Spurg. I devour a lot of review videos, and I especially appreciate the explanation regarding the position of gear in the entire brand lineup. Stepping up/down, makes it easier for us to decide.

[@HeadUpKneeDown]

I have this jacket in size large, and the Alpinestars Nucleon Flex Pro Ci chest armor size large fits perfectly in the chest pockets. Seriously, you’d think they are made for this jacket. The Alpinestars armor is CE level 2, much more perforated, and cheaper than the Rev’It chest armor. I have a 44” chest and first tried an XL and with all the adjusters at their smallest settings, the back protector and chest armor installed with no liners it feels a tiny bit too big. I exchanged it for a size large and am now happy with the fit.

[@wowsoawesomeartem]

Thanks for that idea of putting alpinestars chest armor in the jacket! Like you said, fits almost perfectly! I got S jacket and used S protector.

[@FaroesePictures]

Do you use Large in normal clothes? I only usd Medium in my clothes. So you recommend to buy a M or L?

[@HeadUpKneeDown]

@@FaroesePictures I wear large everything normally. I only tried the XL because of everyone’s comments.

[@Holmaaron]

My sand jacket can hold 15 cans of white claw. Just as an FYI for anyone out there looking to stay hydrated.

[@lawrencetriplett2295]

This is the information I absolutely needed. Thank you very much for your service Mr. Holm.

[@JohnDoe-mh8tm]

White Claw?! The only guys I know that drink White Claw drive electric cars! Not for me!

[@Holmaaron]

@@JohnDoe-mh8tm sounds like you have some issues bud.

[@pneumaticman5927]

I’d love to know that backstory, amigo. 😂

[@Holmaaron]

@@pneumaticman5927 not much of a story, backwater town camping at a hot spring and the luggage was all full.

[@kuhndj67]

So a long term review of the Sand Jacket and Pants... I have the Sand 3 Jacket and pants and have put roughly 100,000 miles on them over the last 6 years or so. (70% pavement/30% Dirt). the first 4 years were primarily pavement (on the Ducati) and the garments held up REALLY well to street use (2 years ago when I washed them they basically returned to looking like new). Last 2 years I've been riding my 701 on BDR's and the TAT and since I ride aggressively on dirt I have rolled in the dirt a number of times (got pics but RevZilla doesn't let me share the fun). Dirt nap related damage to the garment: Tore one of the arm cinch straps (ended up cutting it off the garment since it was hanging) and the jacket zipper failed down at the very bottom (tore 3 links out). On the pants, the bottom of one leg got special attention during a crash and has a small tear on the leg and on the bottom of the flap over the zipper where the velcro is sewed in. Overall I'd say A++ for durability... 100k miles is a lot of wear and I'm hard on gear... if I can figure out how to get the zipper fixed I'll do that and keep the Sand for warm summer day duty (it's a LOT lighter than my new jacket). The zipper issue has caused me to purchase the Dominator3 jacket and Defender 3 pants from RevZilla (Thanks for sponsoring Ari, Zack and the rest of your crew on social media, didn't even look anywhere else). Why not all Dominator you ask? Well I REALLY like my legs to breath, and so preferred the liner for pants but decided to get the full GTX for the jacket to see how it does. What I found with the Sand is that I didn't like an internal GTX garment on my upper body so I ended up wearing a waterproof overjacket and really didn't like that either... but on the pants a liner was fine. Based on the weight of the Dominator jacket (HEAVY) I'm 95% sure I made the right call since the Defender pants, while not as breathable as the Sand pants... are a LOT lighter feeling than the Dominator material on the jacket. RE: Hook back vs. snap back... Personally I think the hook back works MUCH better than the snap, hook is super easy to find after a month or two with the jacket and finding the snaps stays a "big pita" forever with gloves on... hook better than snap.

[@12325814]

Thank you for the review! I got the set of jacket + trousers by myself and must highlight: 1) excellent quality, 2) A LOT of venting options, 3) very good price/ value ratio. Highly recommended!

[@stlouie-dk2pf]

I bought a pair of the pants they don’t fit around a pair of Alpinestars tech 7 boots with both thermal and rain liners installed.

[@Mansplainer411]

rev it size chart says 44 in chest should be XL or 2Xl. so ignore the size chart then??

[@jimotoadv1194]

Isn't the attachment points on the front, shoulders, and back, for Rev'it's own neck brace?

[@patrickmchugh8039]

Yes, there are a few attachment points for a few different pieces including their neck brace and hi-viz vest. We do believe more people will be wearing this jacket without the neck brace though, so just trying to find some other practical uses for it. Can't imagine more than 1-2% (if that) of the owners of this jacket realistically wearing a neck brace if I'm being honest.

[@jaroslavmandik2554]

@@patrickmchugh8039 I still expect to mention the original purpose of those connection points in a review, no? At the same time suggesting hanging keys on your chest seems to be rather dangerous (or at least really painfull) in case you would fall and hit the ground with the chest ...

[@rickchardet01]

@@jaroslavmandik2554 I'd assume he would only suggest wearing your keys on your body while off the bike, like walking around camp, work, etc.

[@Nic_Wood]

How does the jacket and pants zip together with the waterproof liner in? from the video, looks like you have to tuck the liner inside the pants to have jacket and pants together. The waterproof liner is lower than the zip

[@RevZilla]

If you wanted to wear the rain layer under the jacket AND still connect the pants / jacket, you would either need to tuck the WP layer in or it will just rest on the connection zippers. However, an easy solution would be to wear the rain layer overtop of the jacket instead of under. This would keep the entire jacket fully dry and remove the connection zipper issue. REV'IT! designed it to be an over OR under rain jacket so you do have the option.

[@nashcatraz]

Such a well done review. Thank you! I bought this set and didn’t know about a couple of features until I watched this. Btw, it’s an amazing design, I find it hard to find any flaws.

[@shayli05]

Hey, Did the upper layer water-resistant?

[@nashcatraz]

@@shayli05 To a good degree, yes. And I’ve heard it wears off over time, when I’ll have to apply a fabric water repelling spray (3M or whatever). Or I can choose to wear a riding rain jacket over it. To be honest, I haven’t used the inner waterproof layer, felt averse to it. But when the monsoons come upon us here in India, I’ll try it out. I can only reply with actual experience then. But I’m truly loving it so far. Cool even in the heat, when you’ve got the ventilation flaps and all going. Very worth it. 🙏🏽

[@MotoPavilion]

I wish to have an option to buy only the shell.

[@damienbrowne8904]

Which is better for protection and quality materials .. this jacket or Dainese d-explorer 2?

[@alp3781]

I emailed you guys a question and no reply. Is the Sand 4 friendly for touring also or strictly adventure? I read all kind of feedback in Europe and it is mix feelings. Before I spend 500.00, would be nice to get a good idea.

[@rickchardet01]

It's great for touring and commuting all year round

[@alp3781]

@@rickchardet01 Hey Rick and thank you! I just could not spend that much and then on top you need to buy spine protector. I got the JR 5.0 Textile with Alpine spine protector. less then half price of the Rev'it.

[@Lexlugr]

@@alp3781 Most jackets don't come with spine protectors, unfortunately... it's not just Rev'it. The upside is you can at least do some research and pick one that meets your needs (Level 1, 2, seersoft-style...etc).

[@migo33]

the 'hooks' on the front and back are for Revit's neck brace, nothing to do with keys.. really Revzilla, don't you know what you're selling?

[@Laksujaakso]

These videos aren't reviews, these are overviews. This is a video version of a brochure but with less actual info. You can call them reviews when you tell people stuff like will the layers actually keep you warm and dry when you're riding in the rain in chilly weather for a full day. Also, the attachment points on the jacket are designed for actual Rev'it accessories. Third, there's no way Mr. McHugh would feel comfortable wearing a size L when riding with the layers on. I'm 5'11" and 240 lbs and can barely fit an XXL with the layers.

[@patrickmchugh8039]

Unsure how you can speak to what's comfortable on me, but try to keep in mind most people are not wearing each layer 24/7 while wearing this jacket. Sure, the LG was tight on me with all the layers but 100% do-able for a wet/cold ride on an ADV bike (I'd know, I was wearing it). The XL would be ENTIRELY too big on me without the layers on while riding in the summer or just a colder/non-raining day. Definitely something to consider if you are only ADV riding in the tundra in the winter factor in extra sizing for whatever jacket you wear, not just this one. But I'm not surprised you fit in a larger size than me, you are 20lbs+ bigger than me. That extra weight could be at the chest or stomach which is why weight is not what you base jacket/dress suits off of, chest measurement is the most important and my 220lb 44" chest has me in a LG (especially in the summer) comfortably. Ride safe, Pat

[@nbrider7235]

@@patrickmchugh8039 The Rev'It size chart on the Revzilla website says for a 44" chest you should be wearing an XL and that's at the upper limit of the XL (XL: 42.1"-44.1"). I'm 6'2" 240lbs with a 46" chest, according to the size cart I should be wearing a 2XL (44.5"-46.5") and very close to a 3XL (46.9"-48.8"). I understand where Janne is coming from, I bought a pair of pants (not Rev'It) that have the same style of removable rain and insulated liners, I followed the size chart but when I put both liners in I can't get the pants on. They fit good without. I live in Canada, so the insulated liner will be in the jacket approx 50% of the time and I need to able to move while wearing the jacket in that configuration. The waterproof liner isn't an issue, I won't use that as I prefer to have my rain layer on the outside of my jacket but it probably doesn't take up a whole lot of room anyway. Any insights would be appreciated.

[@robertnagy4866]

I've got Tornado 2 jacket and pants and your absolutely right with thing about hot at summer with watterproof liner in rain.

[@Otterplus]

Love the product but these companies should really consider including full armor above the $300 price point. In this territory they’re competing with brands like Klim which are known for including all D30 for jackets and pants

[@dimosk7389]

what do you mean full armor. they have elbows, shoudlers, knees and back protection which are all CE lvl2

[@Otterplus]

@@dimosk7389 what I mean is that products above a certain price should include all armor. Klim and Icon for example consistently include armor in all applicable products. Companies that regularly charge quite a bit for their gear like Rev’it and Dianese do not include back protectors with their jackets or may leave out hip protection from their pants. There’s no reason why a jacket over $300 requires an additional $60+ purchase of a specific cut of armor that should be included

[@dimosk7389]

@@Otterplus ye i agree with that. and i just checked, the Sand 4 doesnt have the back protector

[@rickchardet01]

Well it's either this or they make the MSRP 40 euro's higher and include it, doesn't matter much to be honest.

[@Otterplus]

@@rickchardet01 I get the economics of the process. I’ve made peace with the way the moto gear industry operates. If there was some uniformity in the “optional” armor it wouldn’t be as much of an inconvenience. The Dianese G2 and Alpinestars Nucleon back protectors are close in design just like the D30 Viper and Forcefield back protectors are similar. The proprietary nature of each design excludes potential customers who would rather stick with a brand for the sole reason of not wanting to purchase yet another exclusive piece of armor. I know, I’m ranting, but still lol.

[@raleigh5here182]

curious what advantage a jacket that requires a waterproof liner might have over a jacket that is itself waterproof? I can see the utility in the thermal liners. But for waterproof liner...not so much.

[@RevZilla]

Price point is a key one. Laminated WP is typically more expensive. Also, laminated jackets will have ventilation but only to certain point. You can't laminated a huge mesh panel so drop WP liners come in handy when you need way more ventilation for hot days.

[@raleigh5here182]

@@RevZilla good point, thank you! And thanks for all the quality videos you put out!

[@PanosTsadaris]

Compare with explorer 2 dainese ??

[@ulfheonar9126]

if you dont use the warm layer , can you use the waterproof layer and reverse it to snap 3 buttons to the jacket, what we can see here is only 1 top snap button to hold it to the jacket...

[@RevZilla]

The WP liner isn't designed to be reversed and snapped into the 3 snaps of the jacket no. The WP liner will stay in place via the top single snap and the closing of the zipper. In order to give the WP layer a more finished look (excluding the exposed taped seams), REV'IT! only designed it to have the single upper snap to hold in place.

[@trip_in_the_mirror]

better to buy the Rev'it Sand 4 jacket or the Klim Carlsbad of the previous version if they are at the same price?

[@charliemacaluso6695]

My brother just went down and had a lot of road rash. I am an old school Harley rider that rides in jeans and a leather jacket. Is this jacket warm in the winter. There doesn't seem to be room for extra layers. Also, is it very warm on a 90 degree ride? Thanks, I am looking to make a change

[@brad4690]

I like that the front vents went back to the style of the original sand jacket but I don't care for all those zippered pockets. I also think the sand 3 is a much better looking set so I'll be replacing my original sand set with the sand 3. Already ordered on closeout. 👌

[@RiderGuy]

Love all your products, just ordered the Alpinestars Yaguara Jacket For Tech Air Street

[@Regdor]

Wish it had similar venting to the Spidi Allroad.

[@peekster0]

Dainese D-Explorer is amazing. I lost a lot of weight so the pair I have are now to big and I am not getting the new one for that price but those vents on that jacket are amazing. The entire back is one big mesh panel that you can close as well. Really dont understand why brands dont copy that and make it cheaper. I guess Gore-Tex has something to do with it too. Which I am never going for again. Unless laminated.

[@Andy.H.H.]

I like the ripstop material but other than that, I like my Sand 3 jacket better than this "updated" version.

[@ivanrusic]

Give us the Rev'it! Element reviews dudes! :) time to change my Sand 3 and Horizon into one setup...

[@patrickmchugh8039]

We are still waiting on our samples to arrive so we can go out and ride in it, then we can figure out if a video will be put together. I am interested to see how that one does. Keep in mind though, it does not come w/ a pocket to even add a back protector to it so you would need to BYO it and wear it separately. Kind of like their new Slinshot Back Protector. We shall see though. www.revzilla.com/motorcycle/revit-slingshot-back-protector

[@ivanrusic]

@@patrickmchugh8039 if you do film it, pick the ocher one ;) and get it WET! :) I was going to buy mosko moto basilisk but decided to stay true to revit after all the years in it... regarding protection, they offer elbow and shoulders but I'm just gona use my alpinestars bionic under it...

[@Pfeiffer-fp2se]

you got the sizing wrong... according to revits size chart he should be in a xxl almost a xxxl and hes wearing a large that fits him perfectly... sounds like revit is all over the place with their sizing...

[@maskdavid1991]

I was confused when I bought the tornado 3, I thought it came with 2 liners like this jacket, would've been the ultimate 4 season jacket.

[@sydznl]

Is this suitable for summer only climates. Like Thailand/Malaysia

[@patrickmchugh8039]

You could definitely get away with this setup in those climates if you remove the liners, but it will still be warm. Might be good to take a look at the Klim Baja S4 setup for max airflow. You will have the BYO-waterproof liner but the amount of mesh on that one is pretty crazy.

[@sydznl]

@@patrickmchugh8039 sweet! More air flowand waterproof liner. Just what i need. Will check it out

[@JeffDoerfler]

I wish they would have taken this jacket off for more clarity - it looks like two separate jackets, a rain jacket and then an armored shell.

[@bubu087]

hello, how long does it take to let say small rain to go through without the wp liner?

[@АнатолийДудин-н4к]

Hello! Is there an error in the text that the size L waist is 34 inches?

[@RevZilla]

There is a slight typo: Pat is a 34 US Jean size wearing a size LG. He measures his belly-button waist at 38.5-39 inches though.

[@akaxe77]

Thanks for the awesome review. Two questions please. 1. Can the rain liner be worne outside the main jacket as well? Someone told me that’s possible but wanted to check since I found that surprising. 2. do the Revit Sand 4 pants have room to wear knee braces inside (if one removes the CE2 armour from it). thank you.

[@RevZilla]

The WP liner is not designed to be worn overtop of the jacket, no. You could likely stretch it to fit overtop but you may run into tearing issues with the rigid exterior of the jacket. And yes, the pants can fit slim profile knee braces underneath when you remove the armor. It'll be a tight fit, but as long as your braces are slimmer models you should be all set.

[@p-dub7422]

Great review! How do you think this jacket compares to the Alpinestar V3 Andes Jacket? They look similar but their is a price difference. Also, do you recommend this jacket for just street and daily riders? Thanks

[@RevZilla]

The Andes' WP liner is non-removable, so it'll get much hotter in the summer days whereas the Sand 4 can be customized to match the environment, hence the price difference. You could use the Sand 4 on the street as well, although it maybe a bit overkill in the all-day or off-road features compared to road-touring rigs.

[@adventurewithalex3707]

44in chest by the size chart is XXL, how are you even fitting in XL ? Is sizing off ?

[@RevZilla]

Sizing charts are generic across their entire lineup, so sizing isn't always accurate to it (that goes for all brands). That's why we referencing sizing in our videos and relate it to other REV'IT! gear that Pat has modeled or owned. If you want some specific sizing help for you, feel free to reach out to our CS team and they can walk you through it and get you all set up.

[@Laksujaakso]

The sizing chart works when you keep in mind all the layers. I chose 3XL based on the sizing chart and it fits me with the layers and a warm shirt under the jacket. Take out the layers and use the mesh mid zipper system and it's a good two sizes too big. You can go one size down from the sizing chart if you know you won't be using the thermal layers. Also, the rain liner in the jacket is super easy to use over or under the jacket. The rain liner in the pants is a completely different story. It has three zippers so you simply will not be adding it quickly on the road. It's a pain in the ass.

[@Nick_R_]

This looks more like the roomy 'American' fit. Have they moved away from their slim bodied, long armed sizing?

[@RevZilla]

No, fit from the old Sand 3 still remains the Sand 4 and other REV'IT! pieces. Still the same athletic cut torso and longer sleeve lengths that we've come to know / love from RV.

[@ADVRaiderKTM]

The jacket looks like it was designed in early 2000s.

[@Advcrazy]

what adv jackets dont??!!

[@rationalityfirst]

what are your suggestions?

[@Advcrazy]

@@rationalityfirst not really sure. I like the styling of a couple of KTM branded jackets as well as the BMW Rally jacket. But the ktm jackets I like don’t offer enough venting for me and removable water proof liners. I ride a KTM so the BMW jacket is a no go. My bike would never forgive me...oh and it’s pretty speedy. I currently have a Dainese D-Explorer jacket which I’ve been really happy with, but it looks a little dull.

[@rationalityfirst]

@@Advcrazy You worry too much about looks. The functionality is all that matters. And from what I've seen Rev'it really shines in the little details. I have also a Sand jacket (don't really remember the model) but the jacket is perfect. The pants are a bit short when riding with short boots or shoes, but they also fit really well. If it's a good cut I don't care about the "styling".

[@Advcrazy]

@@rationalityfirst well I don’t care enough about styling to not buy a full looking jackets I bought the most functional jacket I could find. Was just saying that it and most Adv jackets look dated and boring. Function is also the reason I didn’t buy one of the KTM jackets I mentioned. A friend of mine bought the sand 3 jacket and I think it looks pretty good. Seems like a really nice jacket and I think it looks better than the sand 4.

[@sndrsaveli]

Can the new pants be connected with the old Sand3 jacket?

[@p4percatt]

Yes, the zipper is the same

[@jayalexander8027]

How does this jacket compare to the Rev’it Horizon?

[@RevZilla]

The big difference is the waterproofing system. The Horizon's waterproofing is connected to the outer shell, while the Sand has a removable liner. This means the Sand will breathe more in the summer, and be a better 4 season jacket in warmer climates. That said, if you often ride in the rain, or in a climate that is more mild, then the Horizon would suit you a bit better. I hope that helps! -Zack

[@jayalexander8027]

@@RevZilla thanks Zack. I’m in the U.K. so I think I’ll stick with the horizon

[@604roger]

A 6’3 person would be xl?

[@RevZilla]

That all depends on your chest measurement, not height. Feel free to reach out to our Gear Geeks and they can dial you into the right fit though. 877.792.9455 or [e-mail]

[@turbolag5107]

I have both pants and jacket and I'm happy. If anybody is interested in a lighter "rain resistant/wind resistant" pants solution for light rain or if it's a little chilly, go find you some old ACU goretex cold weather pants (they will say goretex on the inside) they are great for commuting. They are thin and light and the zippers are big enough where you can take the pants off without taking your shoes or boots off. They also have holes on the side where you can reach into your front pockets. They work for me for 45 miles at 40° haha.

[@nicholashartzler2205]

Very little talk about the pants...

[@vqc4462]

Dope this matches my Africa twin

[@maxdaddy6434]

Inside water liner a no no. Pass

[@patrickmchugh8039]

It can be worn overtop of the jacket too

[@Lexlugr]

Really good review. Rev'it definitely getting some quality feedback here... we'll see the new features in 2025 :)

[@SimonBrisbane]

Can you please advise where it is made?

[@Don2006]

Made in Vietnam

[@WorldSurvivalist]

If only rip stop worked like they say id did

[@maskedavenger2578]

These light colours are for posh bikers who never get their hands dirty ,How the hell is a proper biker supposed to keep these clean ,after riding miles of dusty grimy roads & tracks getting covered in all kinds of road crap ?

[@LifebyDesign]

Spray some 3m lol

[@maskedavenger2578]

@ Why buy the poncy light coloured kit in the first place , motorcycling isn’t a fashion show .

[@gordonjames8811]

If you Dearly Love to wash your Jacket ft then go for it,

[@ilyaivanov2283]

Благодарю за отличный обзор!🤙

[@bwanaPele]

I can't wear any of this bright red white and blue ish. Give me some casual motorcycle gear that doesn't look like motorcycle gear any day over this.

[@msdosnt]

When are you guys going to do honest ‘reviews’ instead of hyper sales presentations? These are nothing but presentations, there is very little review to any of your videos. Want proof, when was the last time you advised people not to buy something you have in stock? Lemme help….never.

[@byever1]

Do you not understand how a business works?

[@msdosnt]

@@byever1 Do you have a dictionary Einstein? I encourage you to look up the definition of the word ‘review’. It’s in the R’s, that’s after Q. Then maybe look up the term ‘sales presentation’. They call it a review! It’s not a review. This is a sales presentation with minimal objectivity. Maybe you don’t know how a business should run. First things first, be honest.

[@Invis_Space]

WTH are Re'vit doing!? these jackets are terrible compared to the previous generation. Very feminine, colours are terrible and the quality has even taken a dive. tried a few of their jackets recently. this is how they kept the price the same, downgraded the quality. Gutted. 😞