Rev limiter installation on a Yamaha Neos.

[@niksaberkovic4512]

One of best tutorials ever seen!

[@tandrov]

Du er en legende! Har tenkt å kjøpe samme limiter selv, men hadde ingen anelse på hvordan man monterte den.

[@MauroNumeroUno]

Many thanks. For me its a very very usefull video!!

[@RedX_Cougar]

Does this work if its changed the cdi and coil on the bike? Will put it on a Derbi senda xtreme

[@mulja23]

Greetings, I have similar one limitator but with remote control. I put it on Peugeot Jetforce C tech 50 from 2006 and it doesn't work. I tried all modes and nothing happens. All wires are connected ok and i have signal from pickup but it won't work. Why?

[@zorz7887]

hello, i have a 70cc kit installed on my yamaha aerox. after i put the button on the scooter wasnt going anywhere and then it just died and i heavent been able to make it running since then. I would like any help that is offered, if you know something i dont please share it with me. Thank you

[@slobodanmasce2959]

sir, I am asking you to help me where to connect the cdi that has two wires on a yamaha neos 50 2t model year 2004

[@Over-mc8ve]

du er kul neos mann fyf legende

[@ephmorrxl7058]

i got mine to work, but i am stuck trying to find the right mode on it. You said put it on number four, but when i press the button it becomes realy slow like 10 km/h

[@heppu6050]

try one or some letters

[@marceljagodnik109]

Can you show all the proces

[@djneonrider]

Thanks. This limiter matching with CPI Sm 50. And wath cable the bluewhite but haven't got that cable

[@HakanMUSTAFAKEMALATATURK]

check which color is your pickup coil cable

[@HakanMUSTAFAKEMALATATURK]

and ground (minus)

[@robertmiko6257]

Which one was it

[@adamhorvath9972]

this limiter is compatible with MVT dd on am6 cdi?

[@Italjohn]

I don't know, but I think it will work as long as it is a two stroke.

[@shishllk52]

Maybe a bit late but I'm my findings it only works on stock ignitions i tried it on a HPI internal rotor and it didn't work

[@MiguelSilva019]

Good video , Can you adapt it to a motorcycle with twin coil like hyosung gt250 for example?

[@Italjohn]

Yes, it should work on a 4 stroke as well. If you try it, let us know how it goes, ok ☺

[@ariaso4096]

Hello, i would like to ask a question, did you put the limiter up to pass the limited speed or did you do it for other reason?My neo barely goes up to 45 km/h , if say i would put up a limiter as you did, would i be able to turn it off?Thank you.

[@Italjohn]

This is to restrict it down to 45km/h, I have installed a 70 ccm polini kit on this Neos.

[@Edviqor]

Hei! Har en turtallsperre med morsekode. Denne sperren har 4 ledninger. Hvit som kobles til pluss på batteri? Svart til minus, den blå kobles til bremselys og den grønne skal til "pickup". Stemmer det at den hvite skal kobles på pluss polen til batteriet? Takker for svar😊

[@Italjohn]

Hei Edvin. Jeg kjenner ikke til denne typen turtallsperre, så det vet jeg ikke. Var det ikke med noe koblingsskjema?

[@Edviqor]

@@Italjohn bruksanvisning følger med, men den er skrevet av italienere på dårlig engelsk😂 Men hos meg er det i alle fall 4 ledninger som er blå, grønn, hvit og svart. Er det slik at turtallsperra henter strøm fra cdi kabelen? Eller er det fordi man kobler en ledning til plusspolet til batteriet?

[@Italjohn]

@@Edviqor Turtallsperra funger omtrent som et delefilter i en høyttaler. Den kutter turtallet (frekvensen) på ett satt rpm. Du kan dermed bestemme hvor høyt du kan ruse motoren før den kutter. Samme prinsipp som de begrenser toppturtall på biler og motorsykler.

[@olirossross2086]

Does the same rev limiter work for all bikes because my bike is only doing 10 mph then hitting a limiter so would a new limiter work ?

[@Italjohn]

No

[@olirossross2086]

@@Italjohn what will work I have tried most things but I can’t get over 10mph only if I key bang it but then goes back into a limiter mode ???

[@Italjohn]

I think the problem is with the limiter in your bike.

[@olirossross2086]

@@Italjohn what limiter should I get I have a Sunnis street 50 cc

[@disbeat7526]

Good video, i tried it but when i connect it to battery it doesnt do anything, can u give me some tips

[@Italjohn]

It's important that you connect it to the minus side on the battery

[@MAXEL123]

Could someone advise how to adjust the yamaha aerox 100cc? It idles at 10,000rpm, but when driving it maxes out at 7,000. How do you adjust the potentiometers? Thanks a lot for any advice.

[@Italjohn]

You can't make it go faster with the limiter, it's designed for make it go slower.

[@MAXEL123]

@@Italjohn You probably don't understand me. I bought the same rev limiter as you and connected it according to you and it works only when driving, I dial it up to 7000. I have a 21 carburettor, I think it is weak.

[@johnchadwicktilton]

I was hoping to find this on Ebay. I didn't see it there. Different purpose, but was considering purchasing as a last resort in case of a Governor failure on a small engine. Kohler Magnum-18. think it would work for this application or waste of $$ ?

[@Italjohn]

It only works on two stroke engines as far as I know, the Kohler are a four stroke right?

[@johnchadwicktilton]

@@Italjohn It is, but here is the kicker, there is a spark every revolutuion, or a waste spark. So the R.P.M. or tachometer would be the same.

[@Italjohn]

@@johnchadwicktilton It could work, but I have never tested it one a four stroke. I don't know if it will work or not. If you will test it out, let me know how it goes, ok?

[@johnchadwicktilton]

@@Italjohn THey did offer more than one. Sadly the price of the shipping exceeded the price of the actual part.

[@m4rtinve]

Can you make a video with how you mount it on a 50cc gearmoped🤔

[@Italjohn]

No, I don't have access to a gear moped. But it's basicly the same wiring.

[@m4rtinve]

@@Italjohn takk takk😁👍

[@m4rtinve]

@@Italjohn skriver på norsk i stedenfor jeg.. så vis keg har skjønt det riktig nå så skal svart ledning på jordingen på batteriet. Mens, rød ledning skal en plass på cdi’n? That’s it?😯

[@Fill-vw1fm]

so black wire goes on the minus port on batteri correct? cuz i saw people putting it on the frame (bad translation)

[@Italjohn]

You could also put it on the frame, will do the samthing as the frame is connected to the minus on the battery.

[@Fill-vw1fm]

@@Italjohn should i use the power splitter thats included? i dont want to fuck up the wire system. thanks

[@jesperbruland8060]

Regulerer denne selve toppfarten til 45km/h eller vises det bare på desplayet selv om man kjører fortere?

[@Italjohn]

Den begrenser turtallet slik at du kan stille den inn til ønsket toppfart.

[@jesperbruland8060]

@@Italjohn hærlig, takk for svar og god hjelp👍

[@ErikLangnes59]

smeltet du bare den røde og hvit/blå ledningen sammen? hvordan fikk du vekk gummien?

[@Italjohn]

Brukte loddebolten til å smelte bort gummien.

[@brandvannifterick6345]

Can I also install it on my 50cc Supermoto because it’s also tuned so would It work on my Supermoto and then restrict it to 45 km/h if I get problems with police

[@Italjohn]

If its a two-stroke it will work

[@brandvannifterick6345]

@@Italjohnit is

[@jakobhystad7754]

bra video kan du forklara bedre kas kabel på el nettet den røde ledningen skulle på?

[@Italjohn]

Den røde går til pickup fra stator.

[@ardzsuna1]

Hi, Does it work for a Neo's 4 stroke engine as well? If not, what can you propose?

[@Italjohn]

I really don't know. (Do you need that on a 50 4 stroke? Does it go faster then 50 kmh?)

[@samppa0947]

Yeah it works just hook it up to the cdi

[@Josefsson9013]

I might be a little late to the party but dose it matter what cable the on and off switch is on?

[@Italjohn]

I don't think so

[@Josefsson9013]

@@Italjohn Wow thanks for fast answer on a old video :)

[@hydrabattle]

how do you wire it up, like where u suppose to attach the cable to i can;t realy see it fromthis video

[@Italjohn]

HI there. The red wire is connected to the pickup on the stator, black to earth (minus) Hope this helps.

[@hydrabattle]

@@Italjohn YESS this is it i have now fitted is to my scooter and it works flaweless thank you again for this, i could not find the info online

[@danishghostrider]

Hvordan er loven for scooter tuning i Norge? Her i Danmark er det ikke ulovligt til banerace, dog ulovligt på offentlig vej. (What is the rules regarding moped tuning in Norway? Here in Denmark it isn't illegal for racing on tracks, but illegal for road use.)

[@Italjohn]

Yes, it's the same rules here in Norway.

[@danishghostrider]

@@Italjohn Okay, we have 30 km/h and 45 km/h mopeds. Is this the same too?

[@Italjohn]

No, only 45 km/h here in Norway :-)

[@danishghostrider]

@@Italjohn Okay :D Here in DK you can drive 30 km/h mopeds from 15 years of age on the bike trails (If present). 45 km/h form 18 years of age on the roads. In my opinion all mopeds should drive 60 km/h as they are built to do. My Explora does 70 easily, but I follow the speed of the cars or do what the conditions allow. (VGA Explora: See thansen.no) Danish originating shop))

[@Italjohn]

www.thansen.no/scooter-moped-mc-mx/moped-og-scooter/scootere/vga-explora-euro-4-45-km-t-blaa/n853440/pn939692/

[@unkn0wn_635]

Do anyone know witch color the stator cable is on am6 2020

[@cougar1972xr7]

where did you get limiter at thanks?

[@Italjohn]

www.scooter-center.com/en/rev-limiter-oem-quality-toggle-switch-scooter-sck2000?number=SCK2000

[@Skalvseee]

hei har en aerox 50cc 2t 2011 og har køpt en sånn men finner ikke ut hvor jeg skal koble inn vet du?

[@Italjohn]

Ser ut for at din kabel er (O) orange. Se side 153 scootergrisen.org/scooterhjemmeside/download/yamaha_aerox_servicemanual.pdf

[@Skalvseee]

@@Italjohn tusen takk

[@davidknezevic2828]

Is this possible for all Chinese 2 stroke scooters who do not have a blockage, and should they have a cdi electronics

[@Italjohn]

I really cant tell as I don't know the Chinese 2 stroke engines. But if they are buildt like the european the limiter should work also on the Chinese motors.

[@oliverkjeldsen4483]

Well Yes. You can't limit your spark if you don't have a cdi

[@hilmialioglu3185]

Hello I have a Peugeot trekker 2stroke when I open my limiter it’s come so manny smoke why?

[@Italjohn]

Wrong wired?

[@anejfujs1675]

Hey, I was wondering if I could give that up on the aerox and how I block it at 25kmh. The scooter is 2t and is water-cooled and has 50ccm

[@Italjohn]

Yes, this will work just fine on the Aerox.

[@anejfujs1675]

Oh, thank you, I'm just interested in where I need to put the red wire because your video can't figure out what this white cable is. Thank you very much

[@Italjohn]

@@anejfujs1675 The red wire is going to the pickup coil from the stator. I don't know the color for the pickup wire on the Aerox.

[@ChocoChefBG]

If someone finds, please replay!

[@ChocoChefBG]

The wire is the same as in the video for aerox 50cc

[@kingkong6158]

Hi man can you help me to find vin number pls where i can find it thanks

[@opeendoor]

Where does the red cable needs to go?

[@Italjohn]

The red wire is going to the pickup coil from the stator.

[@opeendoor]

@@Italjohn i just got it working, thanks!

[@opeendoor]

@@Italjohn thanks for replying also!

[@Edvard_1337]

Do you think it works on a 2009 4 stroke? It's ecu restricted.

[@Italjohn]

No I don't think so, but I'm not sure.

[@doklazo_5719]

would it work on a two stroke enduro? i changed feom 50cc to 70cc and it would be extremely usefull if i could install that thing

[@Italjohn]

It should work on any two stroke. It's not recommended to drive with it "on" for longer period of time though.

[@kadir5625]

@@Italjohn can u explain why not, im thinking about buying one cause in my country scooters can drive 34kmh everything faster and u get a ticket, so its just to fool the cops. Is it noticable that their is a limiter or does the scooter sound normal?

[@Italjohn]

@@kadir5625 It sounds normal, but you can destroy your plug because the ignition is cutting in/out all the time on high rews.

[@kadir5625]

@@Italjohn ahh ok thanks, and can i district it so it goed like 35kmh? Or doesnt it go that low

[@anseensa9658]

how do i know what number i have to set the arrow at i have a yamaha aerox 50cc -04

[@Italjohn]

Every scooter is different, so will have to try for your self.

[@tnftrappin1936]

is it always a red and bleu wire? also on a piaggio 2 stroke?

[@Italjohn]

NO, I don't think so. Please check the wiring diagram for your scooter to be sure.

[@tnftrappin1936]

wich wire should it be?@@Italjohn

[@Italjohn]

@@tnftrappin1936 what scooter do you have?

[@tnftrappin1936]

vespa et2 @@Italjohn

[@Italjohn]

@@tnftrappin1936 I don't have the wiring diagram for the ET2, but think it's the same as the S-50. Igniton wire is pink.

[@just_trxer2543]

Funker dette med en Yamaha tzr og?

[@Italjohn]

Ja det vil jeg tro. TZR er vel en totakter, og da vil den begrense turtallet på samme måten.

[@MiguelSilva019]

Will it work on a 2005 hyosung gt250?

[@Italjohn]

No, I don't think so. Works only on twostroke engines.

[@BogdanMenhart]

In Piaggio, how is it installed?

[@Italjohn]

Piaggio igniton wire is usually pink.

[@nickdegelder1233]

Do you think it will work on an 2stroke aerox 2007

[@Italjohn]

Yes it will, as it' basicly the same engine.

[@maj1up137]

can anyone help me with doing this on a 4t?

[@Tomijus]

I want to do it too but dont know how to, but if i will do it i will tell u

[@aron960]

where can i find the Urt??

[@Italjohn]

I don't know what urt is?

[@aron960]

Italjohn13 where do you connect the cable with the metal circle at the end??

[@Italjohn]

Aha you mean the earth. The black cable goes to minus to battery or earth on the frame.

[@lepaska]

Hi, can you do a better video where you film that how the wireing is done and how its in the stator, cdi and pick-up cable?

[@Italjohn]

Lepa I,m sorry but it's not my scooter, so I don't have access to it any more. Maybe I can do a new one in the future.

[@lepaska]

Ok, thanks

[@scorpioslab]

Where did you get the rev limiter

[@Italjohn]

www.scooter-center.com/en/rev-limiter-oem-quality-toggle-switch-scooter-sck2000?number=SCK2000

[@24cvargas]

where did you buy the rev limiter? model?

[@Italjohn]

I bougth mine in Denmark, but all scooter shops have this in stock. www.scooter-center.com/es/product/SCK2000/Drehzahlbegrenzer+BGM+PRO+Kippschalter+Scooter?meta=SCK2000*scd_ALL_de*s3065326813680*limiter%20rew*1*1*1*16

[@24cvargas]

i'm from Costa Rica, here is not easy to find it, thanks for the info.

[@ErikLangnes59]

hvor fester man den svarte jord ledningen?

[@Italjohn]

Den festes til ramma, eller minus på batteriet.

[@lucaa482]

Can i put this on a derbi senda?

[@Italjohn]

It should work on all 2 stroke engines

[@sickestfuture647]

Så deg på butikken i eide en dag haha

[@Italjohn]

Skulle ha stoppet meg for en kort prat da :-)

[@unkn0wn_635]

Does it work on 50cc fantic 2020

[@Italjohn]

Should work on all twostroke engines, so if your fanatic 50 is a twostroke, I will say yes.

[@omeryelkenci252]

Hello @ Italjohn13 This kit really shows goods results. Could you please inform is it possible to get same results on yamaha neos4(2018) with this kit? Regards.

[@Italjohn]

No sorry, this only works on 2 stroke.

[@marioz3632]

If i vona do something like that on my gilera smt 50 from 2008 what shuld i do or buy. Maybe you can help. Thenks 😁

[@Italjohn]

@@marioz3632 You can use the same limiter on any two stroke as far as I know. All tuning company's has this on stock.

[@timpobega7951]

Can it go 25 km/h?

[@Italjohn]

To limit it that low could be hard, I have not tried it but it should be possible

[@itzzzaco8126]

can i set kmh on this limiter?

[@Italjohn]

Yes, sort of. You limit the rpm

[@realjohnjones]

@@Italjohn I have the thing on max restriction but yet nothing happends. If i put it on while driving (not smart) it cuts the spark for a second. Could it be damaged?

[@Italjohn]

@bruh m I don't know, sorry

[@MiguelAngelMG]

where you take it from?

[@Italjohn]

Where did I buy it you mean?

[@MiguelAngelMG]

@@Italjohn yes! i live in Spain and I never seen this over here... limiters use to be mechanical with a thick washer on the variator

[@Italjohn]

They sell them at sip and scooter center., but all good scooter shops have them here in Norway, so do a Google search and see if you can find find them I Spain as well

[@MiguelAngelMG]

@@Italjohn I have a Norwegian friend also with a Neos, I think you can find a lot of brand new spares and tuning parts that it is impossible to find over here. In Spain 99's Neos is more than a relique, so it is very difficult to find brand new parts or tuning parts, and luckily that it is a Minarelli Horizontal long carter and you can get most parts from Aprilia, Suzuki, Jog...

[@henryjamieson11]

I want to derestrict the CDI on my Yamaha neos 4 do u know of they neos has a CDI ?

[@Italjohn]

No sorry I have no idea, sorry again

[@Italjohn]

Hi there, sorry for the late answer. I don't know anything about the 4 stroke and CDI's. Sorry.

[@gamziboi]

setup?

[@Italjohn]

Polini 70 iron kit and the old Polini Star Traffic exhaust. Original upjettet carb.

[@ikitekerinegol]

Merhaba bi kitin adi nedir acaba ?

[@Italjohn]

www.scooter-center.com/en/rev-limiter-oem-quality-toggle-switch-scooter-sck2000?number=SCK2000

[@askaoz4340]

Kan iemand mij helpe ?

[@Italjohn]

Waarmee heb je hulp nodig?

[@70cclenkas99]

why tf you need rev limiter?

[@Italjohn]

Well, here in Norway it's not allowed to tune the scooter, so if you gets pulled over you just flick a hidden switch and the scooter is "legal" again 😉