REVELL Eurofighter Typhoon "Airpower19" 1/72 [Build Review]

KZbin: kzbin.info...
Paypal donations: www.paypal.me/starfishYT/5
Patreon: / starfish
Check out these awesome diecasts: airmodels.net/eurofighter/115...
Facebook: / starfishscalemodeling
Instagram: / starfishscalemodeling
Scalemates: www.scalemates.com/profiles/m...
Brent-Air-Decals: www.brent-air-decals.at/jets
National Pride Group build:
/ 131273777550484
- - - - - - - - - - - - - - - - - - - - - - - - - - - -
CGI Snake
CGI Snake von Chris Zabriskie ist unter der Lizenz "Creative Commons Attribution" (creativecommons.org/licenses/...) lizenziert.
Quelle: chriszabriskie.com/divider/
Künstler: chriszabriskie.com/
Hand Balance Redux
Hand Balance Redux von Kevin MacLeod ist unter der Lizenz "Creative Commons Attribution" (creativecommons.org/licenses/...) lizenziert.
Quelle: incompetech.com/music/royalty-...
Künstler: incompetech.com/
national,pride,group,build,model,modell,kit,scale,modeling,modelling,modellbau,bausatz,vorstellung,unboxing,box,starfish,austrian,airforce,air,force,,aircraft,aerospace,revell,04317,eurofighter,typhoon,bundesheer,öbh,österreich,austria,airpower,19,2019,brent,air,decals,fighter,jet

[@Marie579]

You have built a awful kit into a really great model - really brilliant work 👍👍👍

[@Starfishscalemodeling]

Oh thank you so much! I'm working on a 1/48 Eurofighter at the moment 😊

[@markmaccallum4192]

Great job ! May I suggest using Tamiya putty thinned with Tamiya lacquer thinner . You can wipe away excess and reduce sanding by 1000 X .

[@Starfishscalemodeling]

Thanks a lot Mark! This video is quite old; nowadays I use Milliput to fill gaps!

[@dass6558]

Outstanding!

[@ukscalemodellerjunior9830]

Michael, that is a stunning build. It is a very welcome entry to the build too. I think I have it as finished entry number 41.

[@Starfishscalemodeling]

Thanks a lot Ian! Can't wait for the final video. Unfortunately I don't have any other kit to add to the group build 😐

[@danielwilliams3994]

Very good job. Overcoming obstacles is what makes a great modeller! I myself have been modeling for over 50 years so I know the work that it takes to make one look great. Yet I am still learning and improving. On another note, Tamiya primer is the best primer I have ever used.

[@Starfishscalemodeling]

Thanks a lot for your kind words. I'm having trouble finding primers for reasonable prices around here 😐

[@swing.wing_singh]

Great result. Looks fantastic. I liked the details on the seat and the parafilm masking. Carry on the great work. Cheers from India

[@Starfishscalemodeling]

Thanks a lot mate!

[@ramtin-s8722]

Thanks for the review and headsup regarding this kit! I think the result was very good in the end and also the format of the video is short enough...no need to shorten any more in my opinion

[@Starfishscalemodeling]

Thank you for the feedback!

[@majorkriger]

Very nice build my friend!!

[@Starfishscalemodeling]

Thanks Eric Cartman 😉

[@SprueFascinationChannel]

That is a very nice build, like it very much 👍

[@Starfishscalemodeling]

Glad to hear that, thanks for your comment 🙃

[@breakaway414]

Great work to get it looking this good. I also like this type of vid. Good work.

[@Starfishscalemodeling]

Thank you so much for your nice feedback!

[@freddymausyt]

This looks definitely better than the twice seat eurofighter! You have improved your skills! Keep it up! :)

[@Starfishscalemodeling]

Thanks a lot my friend :) I try my best!

[@preshnaidoo1043]

Great video, great build. This is the first time I saw the Austrian scheme and it really looks classy

[@Starfishscalemodeling]

Thanks mate! It's nothing fancy but that kind of makes it interesting!

[@Magendarmtrakt]

sehr geil geworden der flieger

[@Starfishscalemodeling]

Danke 👍

[@fredtedstedman]

the Austrian markings look really smart and unusual .

[@anthonykeel1058]

Thank you for a great video and very inspiring! I have being wanting to get back into models again, my last one was a 1/72 Hasegawa FB-111A converted to a RAAF F-111G (Boneyard Wrangler) back in 2010 and have many models still in the stash I hope to build one day including both single and twin seat versions of the old Revell Eurofighter Typhoon kits.

[@Starfishscalemodeling]

Thank you! Now just start building 😉

[@RubyMarkLindMilly]

That's a cracking typhoon mate

[@Starfishscalemodeling]

Thank you so much Mark!

[@d.r.4453]

Nice job! I'm working on this kit now too. Its certainly not the best kit. Well done on yours!

[@Starfishscalemodeling]

Thanks a lot! Yes filling all those gaps was quite a struggle

[@stephenbtupacisthebest7844]

Very well done great job got a lots of ideas from the vid 👍

[@Starfishscalemodeling]

Thanks a lot Stephen! Please also check out my other videos 😉

[@areciocolmenares3819]

Mm.. good details, however the fitting it seams a nightmare. Great built ..!

[@jpht1964]

Very Nice build … I have very bad experience with most 1/72 Revell models because the plastic they tend to use is way to slick. It just takes way to much time to get a satisfying result.

[@Starfishscalemodeling]

I'm also no fan of their kits. However I have to say that their 1/144th scale jets were surprisingly good!

[@jpht1964]

@@Starfishscalemodeling too small for my old eyes…

[@Starfishscalemodeling]

@@jpht1964 Same here. I'm working on two more dioramas in 1/144 but then I'll move on to larger scales

[@AyebeeMk2]

EXCELLENT! Thinking about the "ghost tiger" I have seen...

[@Starfishscalemodeling]

Thanks a lot! Yes, that green scheme is amazing but I would be broke if I get every kit I like 😅

[@jkoeberli]

Vallejo Primer in den Kübel, Mr. Surface Primer ins Regal ;). Vallejo Primer kann man echt nur für Teile verwenden, die nicht abgeklebt werden müssen.

[@Starfishscalemodeling]

Ja langsam kommt mir das auch so vor 😁 Aber eine allerletzte Chance könnte ich ihm ja noch geben? 😅

[@vampiszon6620]

Good build man. Did the same recently but with Bawarian Tigers pattern (Eurofighter Ghost).

[@Starfishscalemodeling]

Thanks! I love the green Ghost Tiger 🤤

[@charleshernandez9399]

You really did AWESOME work on your Eurofighter. I would like to see you build the newer Revell kit " Eurofighter".

[@Starfishscalemodeling]

Thanks a lot Charles! I have the 1/48th scale "Bronze Tiger" Eurofighter waiting to be build 😉

[@brianvincent2058]

Hi...I liked all the video a lot.. Very informative

[@Starfishscalemodeling]

Thanks Brian!

[@uwemoelderink4190]

Der ist dir ja top gelungen. Besser als die f-18. Weiter so 💪👍

[@Starfishscalemodeling]

Dankeschön, hab ich also nicht zu viel versprochen? :D

[@andreasdreher9449]

i like the video as it is ! enough details, problem solving ...

[@Starfishscalemodeling]

Thanks, glad you liked it!

[@egosemm893]

Ist der vallejo Primer airbrushfertig? Achso und passen sich die Decals sich an mit den seter? Ich benutzte der e Tamiya Mark fit strong

[@Starfishscalemodeling]

Ja ist er, hält aber nicht gut. Durch Micro Set passen sich die Decals dem Untergrund an.

[@TehWulf]

eh scho gsagt, üüüüüüüüüüüüüüüüübelst geil

[@Starfishscalemodeling]

Danke!

[@zeljkos.4966]

Greta work on bad kit! I'm working on mine just now and I know how fitting is bad. I was expecting much better kit from Revell.

[@Starfishscalemodeling]

Thanks! I heard the new tool Eurofighters from Revell are better...

[@zeljkos.4966]

@@Starfishscalemodeling I'm working on Luftwaffe 2020 Quadriga kit and it's same as yours.

[@Starfishscalemodeling]

@@zeljkos.4966 Oh that sucks. I hope you got some filler 😅

[@fma8884]

Ich find die Videos so guad!

[@Starfishscalemodeling]

Des freit mi :) Mehr gibt's auf Facebook bei "Starfish Scale Modeling" ;)

[@apm-algerianplasticmodels]

Awsome build my friend🤩🤩🤩🤩🤩, real details like the real airplane , the only thing missing is the pilot but it's all ok The new cockpit masking issue using the parafilm is so easy will try it on my models I give 5 ⭐⭐⭐⭐⭐ for the video build

[@zaccool9]

Beautiful build!! What color did you use for the landing gear bays??

[@Starfishscalemodeling]

Looks like white or a very light gray 🤔

[@uxbridgeuk]

I never use Vallejo primer as it not that great, and only use Tamiya fine grey or white primer which are excellent for sanding back or polishing before the final paint

[@Starfishscalemodeling]

I also haven't used it in a couple of years. Nowadays I use Mr Finishing Surfacer or One Shot Primer.

[@steflange02]

Hallo Starfish, baue gerade den Eurofighter in 1/144 mit den selben Decals von Brent Air Decals und habe mir das Dark Gull Gray nach einer Seite mit Tamiya Farben gemixt. Dann habe ich den Nose Cone und die Leading Edge des Seitenleitwerks nach der Revell Anleitung gemischt und es hat sich herausgestellt, das die Farbe viel zu dunkel ist, darf ich Dich fragen welche Farbe Du für den Nose Cone etc benutzt hast? Laut Brent Air soll man XF-25 benutzen, aber das sieht mir auch recht dunkel aus. lg

[@Starfishscalemodeling]

Servus Stefan, leider kann ich dir das nicht mehr sagen. Ich glaube, dass ich den Farbton nur durch Ausprobieren irgendwie halbwegs getroffen hab 😅

[@SahanModelbuilding]

Ich möchte genau diesen Eurofighter bauen, nur halt das neue Kit von Revell. Mein einziges Problem ist, dass bei dem extra Decalset von Daniel Brennt sind nicht die Bundesheer Logos für die Flügel dabei, oder?

[@Starfishscalemodeling]

Richtig, nur die Seitenruder und korrekten Nummern. In diesem alten Bausatz sind aber die Bundesheer Decals dabei! Ansonsten bietet Brent aber auch ein eigenes Set für österreichische Eurofighter an

[@SahanModelbuilding]

★ Starfish ★ dann muss ich die Logos also entweder selbst malen oder extra bestellen, also werde ich sie vermutlich malen

[@Starfishscalemodeling]

@@SahanModelbuilding sollte nicht allzu kompliziert sein

[@eg0_hd991]

Sind die Hataka Farben airbrushfertig? Also muss man verdünnen?

[@Starfishscalemodeling]

Habe sie mit ein bisschen destilliertem Wasser verdünnt

[@eg0_hd991]

★ Starfish ★ steht denn drauf „Airbrush fertig“ und falls nein welche Mischung 1:2 ??

[@eg0_hd991]

★ Starfish ★ kannst du mal in deinem nächsten Video AK interaktive Farben ausprobieren kann ich nur empfehlen

[@Starfishscalemodeling]

@@eg0_hd991 Steht nix drauf aber wie gesagt fürs Airbrushen einfach ein bisschen Wasser dazu. Verhältnis kann ich dir leider keines sagen.

[@Starfishscalemodeling]

@@eg0_hd991 Gerne wenn ich welche hätte 😬 Für das jetzige Projekt verwende ich Ammo Of Mig und Revell Aqua

[@migu029]

Very nice detailing of a poor kit. Still, I would've paid more time to the air intakes. There's some big seams still visible. Overall it looks very good. And lose the Vallejo primer😁 . Keep up!

[@Starfishscalemodeling]

I know that there are still some flaws but at some point I just lost a bit of motivation with this kit. Thanks for your feedback!

[@richardkrotec1440]

hello i wanted to know if you plan to make the euro fighter austrian version with tiger strip paint? i saw a video here on youtube that shoed it. thanks Richard

[@Starfishscalemodeling]

Yes I planned to build it but there are still no decals for it. Instead I built the Black Jack from the RAF - the video for that is available on my channel.

[@richardkrotec1440]

@@Starfishscalemodeling thanks i am from the usa.and my grandfather was from austria-hungary from krain,present day slovenia.and he served in the 17th austrian mountain infantry regt. in ww1. so i am always interested in austrian military history.and i am just starting to read about the austrian bundesheer and airforce. Richard

[@Starfishscalemodeling]

@@richardkrotec1440 Wow, that sounds interesting! Have you seen the Ostarrichi Saab Draken? kzbin.info/www/bejne/sKK2nYCtbsqjgtU

[@richardkrotec1440]

@@Starfishscalemodeling hi YES i have seen the ostarrichi saab draken. beautiful paint sheme on the real plane!! also do you know any place here in the usa that sells austrian euro-fighter decals for 1/48 scale for the one you just did in this video?thanks Richard

[@Starfishscalemodeling]

@@richardkrotec1440 If you want, I can ask the guy who produces these decals if he can ship to the US

[@eg0_hd991]

5:25 hast du da nur Compound fine benutzt? Oder alle drei ? Ach und welches Skalpell hast du da benutzt? 7:37 zum waschen benutzte ich auch Alcohol

[@Starfishscalemodeling]

Ja hab nur fine. Das Skalpell ist ein billiges von Aliexpress, hat ca 1€ gekostet aber funktioniert gut 😅

[@eg0_hd991]

★ Starfish ★ ah ok ich wollte mir jetzt alle drei kaufen😬😂 ich glaube dann Kauf ich nur grob und Fine

[@Starfishscalemodeling]

@@eg0_hd991 viel zu teuer

[@bogdanamarioarei1005]

Great build! I'll buid an Eurofighter Ghost Tiger in the future , now I build a Sukhoi SU-27 FLANKER it's almost ready I 'll put decals on and it's done. I have another model to build it's a F16A -15 HALCON CAZADOR but it's dificult for me to do it cause I don't understant the instructions manual. If you build this model please can you put a tutorial on KZbin?

[@Starfishscalemodeling]

I think that F-16 you mention is a Mistercraft kit? If so, throw it in the trash 😉

[@bogdanamarioarei1005]

@@Starfishscalemodeling Yes it's from Mistercraft, I bought it cause has incuded 12 colours paint and a brush and the price was cheap .But why shoud I throw in trash? Did you made the model? What's the reason for throwing it?

[@Starfishscalemodeling]

Mistercraft kits are reboxes of very old kits. They have a lot of fitting issues and the parts don't have many details. My advice would be to keep the decals but use them on a better kit. I heard good things about Tamiya and Revell F-16 kits!

[@bogdanamarioarei1005]

@@Starfishscalemodeling I looked at Revell but I haven't seen the model F16A-15 HALCON CAZADOR VENEZUELA 20TH year edition , I saw this model at Mistercraft maybe I look at Tamiya if they have good model kits to build and especialy this VENEZUELA 20TH edition.

[@bogdanamarioarei1005]

@@Starfishscalemodeling Thank you for your answer! Hy from ROMANIA!

[@arthurkjr]

I'd leave engine nozzles off as long as possible

[@Starfishscalemodeling]

Depends on the kit. In this case, a lot of filling and sanding was required in that area so it would have been more difficult.

[@hozongxi]

I think the paint peeling issue has to do with the application of the paint itself. Tamiya/Gunze Acrylic paints are really forgiving and adhere well to plastics without priming or cleaning of the parts due to its chemical properties that are more similar to lacquers than conventional acrylics. With the AMMO Mig/Vallejo paints, they have to be airbrushed onto the surface in a specific way to achieve the best results and surface adhesion. A really light and misted first coat onto the plastic will give you a good hold for future layers of paints. Mig Jimenez explains it very well in this tutorial: kzbin.info/www/bejne/narXlmmiZqyiodk

[@Starfishscalemodeling]

Thank you! I'm sure that the issue come from Vallejos primer though. I used other primers now and don't have the issue anymore, no matter which paints I use.

[@hozongxi]

@@Starfishscalemodeling Yes, indeed. The primer had to be applied in the same fashion as those paints. I have always prefered Lacquer-Based primers and paints as they have better adhesion.

[@eg0_hd185]

4:25 ich habe da auch einen sehr guten Tipp nimm Mr Surfacer 500 und dann mach dat in die Spalten und dann nimm Lösungsmittel und mach das überstehende Zeug weg damit dieser Text könnte unverständlich sein...

[@Starfishscalemodeling]

Habs verstanden aber hab keinen Mr. Surfacer 🤷‍♂️

[@eg0_hd185]

★ Starfish ★ kostet 4-5 Euro für 40 mal auf super Hobby

[@Starfishscalemodeling]

@@eg0_hd185 Schon auf der Wunschliste 😉

[@eg0_hd185]

★ Starfish ★ gute Wahl

[@Starfishscalemodeling]

@@eg0_hd185 Danke 😉 Ich plane übrigens eine Abstimmung über den nächsten Bau da die F-16 wahrscheinlich morgen fertig wird.

[@eg0_hd185]

12:00 länger!!!😂

[@Starfishscalemodeling]

Wie oft siehst du dir das Video denn noch an? 🤣

[@eg0_hd185]

★ Starfish ★ immer wenn’s geht 😉

[@apm-algerianplasticmodels]

1st comment man

[@Starfishscalemodeling]

Ok.