Reverse Canvas with HTV

[@CrystalinStitches]

Thanks for the great tutorial! I have seen this project gaining popularity and wanted to try it so this tutorial is perfect timing.

[@sandyperry2163]

You can go to an art supply store such as Pat Catan's and purchase the stretcher sticks and primed (gesso coated) canvas. You will save yourself a ton of time and probably money by doing this rather than tearing everything apart and then put it back together again. You buy the stretcher sticks by the piece so you can have your finished piece any size you want...you decide.

[@ElleBeeCreates]

Definitely an option, thanks. There’s a bunch of ways this can be done to suit each persons needs.

[@monicab28]

It's actually probably cheaper to do it the way she is doing it. You can get packages of the canvas on sale for very cheap.

[@GarmanyRachel]

Sandy Perry Her method is cheaper for those big packs of like 7 canvases for $9

[@janelopez4668]

ElleBee Creates [e-mail]

[@rebeccabriggs2982]

This is so useful because Im wanting to work on raw canvas.... by removing and reversing it. Hopefully I can get it stretched enough and restaple

[@donnierodriguez4442]

👍 Now I understand how to do this. I think spraying some 3M adhesive on the back of the frame may help to apply the canvas before finishing it off with staples.

[@normacmckay-morris3268]

Hello , so why did you take out the staples from the corners of the frame? Would it fall apart ! I love it ❤

[@ElleBeeCreates]

I probably could have pulled it apart after removing all the staples but once I reattached the canvas, it holds together just fine. You can leave them in if you want!

[@normacmckay-morris3268]

Okay

[@designsbyadahlem4982]

Thanks for this tutorial. Your canvas maybe a lot of work, but it looks professional. You gave me some ideas.

[@ElleBeeCreates]

Thank you

[@shirleylondon6050]

You can use painters tape on the back and then flip it over to check the alignment before stapling.

[@ElleBeeCreates]

Definitely! I make every effort to make sure my vinyl is aligned straight so that as long as my canvas is centered, it’s not a big concern

[@TrumblebeeMom]

This project came out very nice. It looks rather tricky to line the canvas up nicely afterward, though. Perhaps waiting to do the pencil tracing around the outside and trimming until after the transfer has been done would be easier. You could stretch the canvas more tightly with a little something to hold onto, as well. Just a thought.

[@ElleBeeCreates]

You can certainly do it that way if you’d like! There’s no right on wrong, just what works for you.

[@brittanimiesner8641]

OMG!!! What a good idea to permanently tack your teflon sheet to your heat press!! how did you get the clips to stay???

[@ElleBeeCreates]

They are magnetic. There’s a link to them in the video description

[@lindaspurgeon8223]

You might like using an upholsterer's staple puller. It would be much easier for you.

[@gregorydinning7978]

Or a butter knife jeez

[@MeganFerentheil]

Would a staple remover from the stationary section of stores work better getting the staples out?

[@shannielshakespeare7849]

Thanks so much for the tutorial..How would I hang this up?

[@ElleBeeCreates]

I use a sawtooth hanger

[@FoxysDomesticSide]

I've never seen this before, thanks, need to try this out!

[@dabbylynn]

Thanks for the tutorial. You make it look so easy. My only concern is, shouldn’t there be glass on the front to prevent dust collecting years down the road?

[@ElleBeeCreates]

Not necessary, and you can dust it regularly to keep it clean

[@mildredbean1363]

Thank you so much for your tutorial. Is a lot easier that I could imagine.

[@UnicornDustDesigns]

Thank you! Very informative

[@shadataylor]

Do you have to have staple gun? Is there another way to reapply the canvas to the frame? Also could you spray paint the canvas first?

[@ElleBeeCreates]

I’ve never used anything but a staple gun, but you can try other methods and see how they work. I’ve painted the canvases with water based paints but I’ve not done it with spray paint. You definitely want to make sure it was completely dry before you put it in your heat press or ironed it.

[@shadataylor]

ElleBee Creates Thank you!

[@kristencrane3943]

Push pins work, too.

[@shelly3317]

Okay, mind blown.. lol. I did not know I could further press with my heat press once I removed the carrier sheet. Is there a rule of thumb for how many times you can do that? Like If there are 4 different colors, can i still do that without harming the first color once the carrier sheet is removed? Is the key to make sure the teflon sheet is used? LOVE this video! VERY informative! Thank you!

[@ElleBeeCreates]

No rule of thumb but the trick it to only press each color for a second or two. The risk is the HTV shrinking. Check out my channel, the top video is on layering multiple colors, I’ve got lots of tips in that one, you can fast forward to the middle where i shoe application. And yes, always use a Teflon sheet! I keep mine attached to my platen with magnet clips!

[@nikkijpet9790]

What side of the canvas do you use, the white waxy side or the more neutral colored side?

[@ElleBeeCreates]

I use the white side

[@mariak2714]

Should I put modpodge to the canvas before HTV or after? Thank you!

[@ElleBeeCreates]

There’s no need for mod podge.

[@sbudzinski]

Turned out great!

[@ElleBeeCreates]

Thank you! And thanks for watching!

[@tammeyward3004]

Can I ask, why do you not heat press for the 10 seconds with each layer. Meaning heat press the saying for 10 seconds, then 10 seconds for the heart. Would that be to much heat on the canvas and would it melt a bit or discolor? I loved your video, but that was my only question.

[@ElleBeeCreates]

Because then the first layer you pressed would get way too much heat. You’re only supposed to press the vinyl for 15 seconds max, more than that and you’re over cooking the vinyl which will cause it to shrink and can damage the adhesive. You just need to press each layer for a second or two to tack it down and then finish the time once all layers are in place.

[@ashlishockley7608]

Thank you for sharing! Off topic, but where did you find your fabulous watch band?

[@ElleBeeCreates]

From amazon! I can’t find this exact one but this one is similar amzn.to/2oWADCc thanks for watching

[@TheSpole]

Somebody please get her a new stapler! 😆 great video

[@ElleBeeCreates]

😂 I did finally replace the stapler. It’s a whole new world!

[@gracegiulini2062]

Great tutorial. I missed the weeding, did you do that off camera?

[@ElleBeeCreates]

Yes, I did weed this one prior to filming

[@veronicaallen2721]

Do I need to use sand paper on the wood before painting? I just removed the canvas from the frame, but the wood is very rough.

[@ElleBeeCreates]

You absolutely can sand the wood if you’d like. Some are rougher than others so it’s all personal preference.

[@kathmeek1260]

You can buy a staple remover for less than 1.50$ so much quicker and easier x

[@ElleBeeCreates]

I have several but they do not fit under the staples. Between the soft wood and the thick canvas, the staples are embedded pretty deep.

[@dawnmason9558]

Love the floppy ruler where did you get it please?

[@ElleBeeCreates]

it was a freebie at a trade show I went to, but I've found them on amazon amzn.to/2EYFIkm

[@dawnmason9558]

Unfortunately they don't post to where I live but I will research closer retailers. Thank you

[@greenlightmultimedia1950]

Dawn Mason try Michaels Hobby Lobby Joans or just a hardware store

[@dawnmason9558]

GreenLight Multimedia I am in UK we don't have those stores!

[@sleeplessinthecarolinas8118]

Thanks for the wonderful tutorial!

[@MsCyndiLu]

Do you happen to know if I wanted to paint the canvas, can I still apply HTV on top of the painted material? If so, do you have a suggestion for paint? I have tons of acrylic and a little bit of chalk. You did a great job with this tutorial. Thanks for the step-by-step video. I have BIG plans! LOL.

[@ElleBeeCreates]

I’ve seen it done but I haven’t tried it myself. The biggest thing, no matter which paint you try, would be to make sure you allow it plenty of time to dry

[@mchavez76]

I don’t understand why not just use a regular frame? Why take apart a perfectly good canvas?

[@ElleBeeCreates]

I make lots of signs with frames, this is just a fun technique to try. Not everyone has access to tools to build a frame, or the space to make one, or the desire. It’s a fun quick way to create some personalized decor.

[@shelly3317]

I would also think it would be much less expensive to do it this way, since you are getting a frame AND canvas to use for the HTV. You can get packs of like 10 canvases like this at Walmart for next to nothing. I have priced frames on their own and they are pretty pricey. :)

[@ElleBeeCreates]

Yep, its totally personal preference - there's no one way to make anything. Let your creativity flow!!

[@zobeidacardiel1118]

thank you for your help!!

[@JenniferHousen]

You are a genius!!

[@Sylvia3456789w]

Great video, I was wondering how to do this. Thank you

[@saygoodgood4873]

Thank you for this inspirational tutorial 👌🏻

[@findroots7151]

So I tried this and for some reason my tails, which are thin, of some of my letters turned all squiggly, like they are trying to press down into the texture of the canvas. Any idea why that happened? Also, The back side of the canvas is a little darker but seems smoother. Can I use that side? Would HTV adhere ok to the back? Thanks for any suggestions.

[@ElleBeeCreates]

you could use the back side. What time and temp were you using? Sounds like it was too hot

[@findroots7151]

I used a regular iron and used the linen/cotton setting. I applied firm pressure on 3 separate sections and held for about 30 to 60 seconds each.

[@ElleBeeCreates]

I would try lowering the temp of your iron and pressing for less time. You only need to press your iron down for 15-20 seconds per section. Cotton/linen is often too hot as well. A laser thermometer can verify the temp for you

[@findroots7151]

Thanks for the tips . I'll try another and see how it goes..

[@kelly029x]

Thank you!! I love your videos!

[@jusbcuzkat2011]

Idea to make easier on cutting the staple put a tiny screw driver under staple raise staple up a little then go around and snip it. Or maybe a staple remover might help raise it up a little to be able to snip it easier.

[@ElleBeeCreates]

Problem is, with this brand of canvas anyway, the wood is so soft that the staples are embedded so deeply that I can't get a staple remover or screw driver up under the staple as the canvas is pushed up around the side due to the depth of the staple. Other brands that may be possible, but it just doesn't work with this brand of canvas unfortunately.

[@deborah4725]

If your cutting off the canvas around the sides anyway then why not go around with a knife instead of taking all the staples out and then cutting off the canvas where the staples were in the first place? Seems a waste of time to me.

[@laurenlyon5273]

Hi! Thanks for the awesome tutorial! How long would you say to press and on what temperature? Thanks so much!

[@ElleBeeCreates]

It’s going to depend on the brand of HTV your using. Every brand is a little different. I’m using Siser Easyweed so I’m pressing at 305 for 15 seconds.

[@tkidd0622]

Can you use regular transfer vinyl?

[@ElleBeeCreates]

Adhesive vinyl? Sure, it just doesn’t stick to canvas as well in my opinion and doesn’t give the same painted on look, but you can absolutely use it.

[@tkidd0622]

Thank you

[@carston914]

Do I have to use a heat press to get the vinyl to stick?

[@ElleBeeCreates]

When using heat transfer vinyl, you will need a heat press or an iron to get it to adhere. The adhesive is heat and pressure activated.

[@carston914]

ElleBee Creates Thanks! I was wondering if an iron would work. I don’t have a heat press.

[@dawnmason9558]

You really have to press hard on an iron so an ironing board is useless as it bends. Use a pressing board on a table instead. The HTV is adhered permanently once you can see the weave pattern of the canvas through the vinyl.

[@sworley1956]

I was told to spray your canvas with adhesive spray let it dry and your vinyl will stick perfectly

[@Janneke63]

I would use a destapler or a stapleremover. Would't that be much easier?

[@ElleBeeCreates]

If it will fit under your staples, yes, it wouldn’t fit under mine, they were in so deep and the canvas was pushed up around then

[@robinshumate4379]

what is the temp. you used? i was trying to see on your press but i couldn't

[@ElleBeeCreates]

Time and temp are determined by the brand and type of HTV you’re pressing. For example, Siser Easyweed is 305 for 10-15 seconds, Siser Glitter is 320 for 15 seconds, Thermoflex Plus is 320 for 20-30 seconds. Always follow the directions for time and temp given by the manufacturer of the exact HTV you’re applying

[@dyane1869]

Cool concept! Ty

[@jeangeorge3143]

Very pretty

[@viviantherrien2373]

Thanks for sharing my first one watching. I feel I can do it now

[@MarilynDIAZDESIGNS]

Love this! Going to have to try this!

[@tannergiba805]

Did you have to mirror it for the heat transfer

[@ElleBeeCreates]

Yes, you always need to mirror when cutting HTV. The only exception is some printed HTVs.

[@usafamom]

You could use wood filler to fill in those slits on the frame

[@ElleBeeCreates]

If the slits bother you, you sure could! Once painted and hung, they aren't even noticeable.

[@tracymorrison6273]

too bad dollar tree doesn't just sell frames with no canvas and then buy the canvas and staple yourself; would make it so much easier...

[@malindasmith3496]

That is exactly what I was thinking the whole time!

[@robinbess455]

Can you paint the canvas then heat press it?

[@ElleBeeCreates]

I personally haven’t done it but I know it’s been done. Just make sure you allow PLENTY of time for your paint to dry (24+ hours for some paints)

[@noesnana]

Yes, I do it all the time. This seems like a waste of time to me! I just don't get why. I painted a canvas and dried it with a hair dryer, put the htv on around 30 min after painting. It was perfect.

[@ericagalloway1355]

What is that over the top of the press, and the reason for it?

[@ElleBeeCreates]

On my top platen? That’s a Teflon sheet and it protects the platen from what’s being pressed.

[@jakeishagreen-miles8529]

What is holding your sheet to the press?

[@creationsbytina7057]

Where did you get your staple gun?

[@ElleBeeCreates]

Amazon. Theres a link in the video description, but here is it again. They've updated the color since I bought mine amzn.to/2BFtWsQ

[@sherrythornsberry4351]

What size staples do you use?

[@ElleBeeCreates]

they are the stanley heavy duty 5/16" staples

[@dawnmason9558]

What is chalk paint please?

[@ElleBeeCreates]

chalk paint is a paint that kind of has a chalky finish when it dries, you can buy it many places, I linked this particular one in the video description

[@deannagarrison5796]

What font is this? TIA!

[@ElleBeeCreates]

This is actually a file from the SDS but it looks a lot like Bebas font

[@susandeakin9320]

Hi, what is the name of the ruler you are using please.

[@ElleBeeCreates]

It’s a lip edge ruler, there’s a link for it in the video description

[@ElleBeeCreates]

You could use whichever size appeals to you, I am using the 5”x24”

[@brittneycork1588]

Has anyone tried to attach heat press vinyl to the other side of the canvas?

[@ElleBeeCreates]

It works. You can press HTV to a lot of surfaces, fabric, wood, paper, and more.

[@VinylSkillz]

How much would you sell that for??

[@ElleBeeCreates]

I’ve seen them sell anywhere from $10-$20 in this size. It really depends on the market in your area and the quality of your work.

[@VinylSkillz]

ElleBee Creates Thank u. I primarily make tee shirts. I saw your video and thought, y not??

[@ElleBeeCreates]

they are a lot of fun and much quicker and easier than wooden signs

[@LisaHancockGuthrie]

I love it

[@BuildAQuilt]

Great project, but his expensive is that huge press. This seems cost prohibitive.

[@ElleBeeCreates]

As much as I use the press, I’ve more than gotten my monies worth. It gets used several times a day, I do so many projects with it. You of course can do this project with a home iron if you don’t have a press.

[@BuildAQuilt]

ElleBee Creates Thanks, its great to know thatI can use a regular iron.

[@jrarig6176]

Can you please share details on type and model heat press and the awesome clear ruler? Thanks!

[@ElleBeeCreates]

Bloom, if you check the video description, I have links for everything used in the video. If something is missing, let me know and I’ll be happy to grab you a link! Thank you

[@dawnmason9558]

You CAN get smaller Heat Presses I had one for xmas that does A4 size. It was only £95

[@LindaCrowder10021950]

I think I would buy a larger canvas and cut the inside out before doing all that staple cutting. Wow. That’s a lot of work. Just an idea....

[@ElleBeeCreates]

There’s many ways to accomplish the same final result. You could definitely do that if you wanted to!

[@kenedeighbara2188]

I just cut my canvas off and staple it back on and you can’t even see the original staples.

[@helenmoore5487]

Why not use a staple remover & pull it out?

[@ElleBeeCreates]

Staple remover doesn’t fit under the staples. The wood is so soft that the staples are deep and the canvas is pushed up around the staples.

[@helenmoore5487]

Ooohhh Gotcha! Thanks for the all the great tutorials!

[@JohnDoe-it7dl]

It would have been so much Cheaper with Regular 651 vinyl. HTV is double the price for the same results, had you have used 651 vinyl on a white piece of paper lol. No heat press needed

[@ElleBeeCreates]

You can certainly do that if cost is that big of a factor to you. I love how well HTV adheres to canvas seeing as it’s made for textiles, whereas “651” is designed for hard, solid substrates. And extra $1 in materials and a lot of time savings is worth it to me for a classy finished product that I don’t have to fight to apply or worry about lifting with age.

[@tobymorris2534]

With osteoarthritis, I wouldn't be able to remove the staples. That's a lot of work with your hands and fingers. Would make me very sore.

[@jeangeorge3143]

Like this way you removed these frames

[@lupegarcia8778]

What did you use for the heat

[@ElleBeeCreates]

I had it set to 305 because I was using regular Easyweed.

[@lupegarcia8778]

ElleBee Creates and what was the clear sheet iron on??

[@ElleBeeCreates]

I used Siser Easyweed HTV

[@lupegarcia8778]

ElleBee Creates thank you so much I got the maker all is very overwhelming

[@angelacrispi89]

how long did you press for after the initial setting of the vinyl (to get it to tick permanently).

[@dianemah2578]

A Stapler remover will remove faster.

[@ElleBeeCreates]

As mentioned in many other comments, the wood is very soft and the staples are imbedded deep into the wood and canvas, the staple removers could not get under the staples on these frames.

[@samcarper9325]

Snips

[@kohinoormobile5791]

Sam Carper

[@AlchemicNeedleworks]

Why not just buy a frame and a piece of canvas? Seems like a lot of work for a basic looking project. Nothing on you but whoever started this trend lol