Reverse Light LED All-in-One Kit by Phastek Performance

[@darkelissar]

Just bought an ‘18 SS 1LE and your channel has been very helpful with answering a lot of questions I had. Keep up the great work. I’m installing this along with the GM black taillights and 3rd brake light tomorrow, and your vids were very helpful. 👍

[@jimshahan6206]

that phastek harness is beautiful and makes sense- looks as if it will last the life of the car.

[@davidkrye]

You are just like The New Yankee workshop guy. Everything is nice and neat. I did this and donated blood reaching behind the tail light.

[@alexmccamy6808]

Hopefully these are back in stock soon. Thanks for the heads up on the kit. This is much better than the other options out there. Great video!

[@hyperblue2ss84]

Just got my kit in the mail and this video was up the same day lol old harness sucks but it'll have to do for now

[@jp5402]

Just installed these and while I like the ease of install and the wire harness I may purchase some brighter/higher quality bulbs.

[@starwarscentral]

I'm surprised at how clean that install was :) And the lights actually look good as well, Win win :D

[@theshocker_guy5966]

So much better then my video, great video Matt. The set up from gen5 dyi is great, but I do like how phastek has put a sock over the resistor.

[@edelrio7136]

My Plug and Play LED Reverse lights just came in, I couldn't wait and Put them right on. I had watched this video at least 15 times and it made it soo easy, Thanks for the Vids. The one thing I noticed was my resister did seem a little hot. I used the same Phastek set-up as in the Video.. How hot is ok when it comes to that resister.. I could touch it with bare hands but I could definitely feel the heat

[@Lethalgarage]

+Emiliano Del Rio it can get warm

[@edelrio7136]

LethalGarage , again thanks for the Vids..

[@Bryan-rl2ik]

Really nice kit and look forward to it getting back in stock !

[@darthraider.897]

Been waiting for this, hopefully they restock soon.

[@LamaThunder]

Had bought me some LEDs and resistors from advance auto. Not sure what the problem was, but the lights were still dim lit after wiring in the resistor. Gonna order this kit and return what I got, hopefully it works out.

[@AJCoReTV]

The overhang plastic thing you mentioned @ 4:05 is my nightmare, my hands won't get past it to turn the bulb.. but you mentioned using a screw driver to use as leverage... I might go back outside & try that.

[@brianmotley1705]

I'm not the only one to work in the garage barefooted. Nice

[@michaelpackulak2833]

Matt ? Have you used the phastek ground effects like front spoiler and side skirts ? Need to know if they are good quality if you did use them ? Please respond asap ! Cause they are the best price so far for the my 2022 LT1 Camaro or if you know a atone who has tried them out ! Would appreciate help on this ! Better priced them EOPamd ACS products and I’m on budget but will flex for Better if they don’t have a good product !

[@Rchase234]

like your videos very helpful seeing that i just got a 16 Camaro. Thanks for your videos.

[@Hot-1LE]

Thanks for the vid dude

[@molo1706]

that was the fastest sold out I ever seen.

[@glujan1984]

Out of stock already lol can't wait to get mine!

[@suepaulovitz9449]

Which Co sells these parts

[@cencalyanksfan]

I have a 2017 Impala Premiere and I installed some JDM 7440 reverse lights. After 9 days at the dealership, it was found out the LEDs were the cause of my battery dying 4x in the first 3 months of ownership. Do you think the resistors will solve my problem? It was found the BCM wasn't getting the shut down signal from the LEDs, and it was draining my battery over the course of 2-3 days. All times this happened was over a weekend. Thanks

[@Rchase234]

How did these reverse LED light work out for you from phastek? any overheating?

[@Mr1troyd]

Man, I wish GM made those OEM Blacked Out lights for the 5thGen !!! :-(

[@briankoronka4746]

Will this kit allow for the use of led bulbs in the rest of the tail lights?

[@DangerClose805]

Do u know if they have one for a 22 think it’s only for 16-18 rn

[@stephanieramirez9876]

What’s that tool you used to remove the clips it looks so easy with that I tried using a flat screwdriver and it doesn’t come out

[@Vetrebel29]

I just tried to install the LED lights and they wouldn't work. Could it be the lights? Connection? If I pressed on top of the light it would come on but that's it. Help!

[@sowthan]

Have you done the front turn signal as LEDs? I skimmed through your videos but couldn't see if you had.

[@Lethalgarage]

I have not.

[@thomasmcwalters9219]

Hey Matt what tail lights do you have on the camaro ?

[@gabea.458]

Signed up for the email notice for when they are in stock.

[@BluesBlake14]

Funny that you were worried about scratching your paint. I just installed my tinted lights and scratched my bumper when tugging the whole light out. 😢

[@goodknight6828]

Juan Aldana-tabares SAMEEEE😩

[@theboingster6947]

same :/ was not a simple tug to get it out

[@oscarsanchez9336]

Hi I have a question you know what color are the wires for the reverse light on the hero taillight for camaro 2014

[@srt.v8096]

does the pack come with two or do you have to buy 2 separate packs ? If that makes sence

[@srt.v8096]

nvm I just finished watching the whole video answer was there lol

[@Lethalgarage]

Just need the one.

[@javierdiaz6222]

hello, How many bulb of position light has each headlight.

[@misterlove7034]

Which license plate LeD build can I use?

[@Maverick-ho6jm]

Wat r the leds reverse light and brake light part numbers we should go with or brand

[@michael-qv2du]

In one of your videos I heard you mention a guy named that gm dude or someone like that where u can find parts for the car was that the name of the site or Is it something else?

[@Lethalgarage]

He’s gone now, currently runs Wildhammer Motorsports.

[@michael-qv2du]

@@Lethalgarage oh ok

[@Kaizer_911]

This cable/kit looks similar to the one from gen5diy, have you looked at that one Matt?

[@Lethalgarage]

I have not.

[@mgnfct1410]

Did you have to adjust any of the groves to get the tight fit?

[@Lethalgarage]

+Gretchen Wiener nope

[@DonatelloLabouche]

Hey what's up Lethal, I just ordered the OEM GM smoked lights LED with the 3rd brake light within the kit. My question is, arnt those already LED? As it States they are LED OEM replacements? From the dealer of my ad so do I need to buy the harness and bulb?

[@Lethalgarage]

The lights in the 3rd brake light are LED. The reverse lights in the smoked setup for the reverse are not

[@beanpower530]

Would I need 2 if I decided to change out the break likes to led to or would one be fine

[@Lethalgarage]

Just need one

[@TheTy517]

I have an LT model. Do i have to buy any extra wiring etc and do i need a resister for both sides ?

[@Lethalgarage]

Just one side as it is one loop

[@ransomgamez5684]

i added the blacked out tail lights from gm like you have and now my turn signals hyper flash. will this kit fix that problem?

[@Lethalgarage]

sounds like something isn't connected properly.

[@randy42750]

I did that but the bulb doesn't turn off when I turn off the car. Any ideas why?

[@Lethalgarage]

do you have a load resistor harness in place?

[@Hot-1LE]

Looks like they aren't on the phastek website anymore wonder why

[@Lethalgarage]

I think they carry another brand now.

[@alexcism2477]

Do you only need that kit if you get led bulbs

[@Lethalgarage]

Yes

[@alexcism2477]

@LethalGarage Thanks for the response, so if I get let's say regular bulbs like the ones it has now I don't have to change or buy anything else ?

[@td780]

Where did you buy those bulbs from?

[@swatdoggy]

Where did you have to dremel that other kit I'm trying to use that until the other part arrives

[@Lethalgarage]

Just the plastic studs that didn't fit right.

[@Rojellyb]

what kind of options do I have with the base non-RS LT model? I had been waiting for phastek to restock for a while but It wasn't until now that I noticed it doesn't work for the non-RS LT Camaro.

[@Lethalgarage]

I am not aware of options.

[@lucasbriones4531]

I think I saw finger prints on that fender! j/k!!

[@Baconinakan]

So mine don't even work. lol I used the LEDs provided by Phastek, harness provided by Phastek and neither bulb works.

[@Lethalgarage]

Give them a ring they will sort it for you.

[@phillippinoFLASH]

Im kind of confused, why can I not just buy the LED bulbs from autoparts store and plug them in? Why do I need the harness

[@Lethalgarage]

The car is built around an always running current. LEDs just plugged in will glow and use the power and drain your battery

[@suepaulovitz9449]

If I buy a 50th 3rd brake light blackout kit, I should be using a LED ?

[@Lethalgarage]

+Sue Paulovitz ???

[@suepaulovitz9449]

OK this is for a FIFTY comaro conv . Would a 3rd brake light black out kit with a LED light, be bright enough?

[@throbacktruckin]

since I have base model but did buy the clear black led lights, just haven't installed. will this kit work in my car since I don't have an RS package?

[@Lethalgarage]

+Rawkreatedbullies Houston yes it will

[@throbacktruckin]

thanks Lethal G and Juan. I'll be ordering the harness Juan suggested since my taillights are blinking super fast. Just waiting on my harness for the RS/SS headlights to arrive so I can install them next.

[@slimd98]

Kit out of stock,,, that was fast

[@NoName._777]

Bro I have the blackout tail lights and I can’t twist off the bulb part…help?

[@rockernro]

That’s when you use pliers lol

[@seanallen1315]

Are there any bulbs that still need to be upgraded to LEDs on your car?

[@Lethalgarage]

+Sean Allen 3rd brake light

[@nickgiacalone]

LethalGarage did you upgrade your front turn signal to LED and if so did you use a resistor or were you able to find away around that

[@Lethalgarage]

+Nicholas Giacalone I did not

[@TriniS2k]

Do you have a led head light install?

[@Lethalgarage]

I don’t

[@Joeymart3]

I'm having a hard time removing the harness, every time I push down the clip just slides back in.

[@Lethalgarage]

It can be a pain, but it will come apart.

[@SolidSnake-1776]

Does this work on a 2020?

[@Lethalgarage]

They offer a 2020 setup.

[@petethehawk5186]

Why does the description on their site say only works with cars with RS package? Seems odd

[@petethehawk5186]

Also love how it says "in stock ready to ship!" But then you try to add it to your cart and says it's out of stock lol. Need some better web peeps over there lol

[@Lethalgarage]

+Pete TheHawk the SS comes with all the items the RS package has ;)

[@petethehawk5186]

LethalGarage yea I know just poor wording lol

[@josebermudes6704]

LethalGarage so Matt this will not work for a 2016 base model? I’m sure that’s right but better safe

[@Lethalgarage]

Base model SS or...?

[@kenettrivera8168]

The reverse led light only turn on when im on reverse. They do not tutn on when i press the unlock button.

[@Lethalgarage]

What year is your car?

[@kenettrivera8168]

LethalGarage 2017 camaro ss

[@thisismynameallofyou]

Mine does the same thing, 2018 Camaro SS 1LE

[@camoman808]

I think its a stick/auto thing, my 18 1le only lights up for reverse also not unlock.

[@peyn]

I don’t think they turn when you unlock it during the day time

[@luisbonilla3598]

Does anyone know if the resistor is water proof?

[@sbkd00mz]

Will this work on the 2017 ZL1?

[@Lethalgarage]

Yes.

[@sbkd00mz]

thanks man! they really should just say that or say all ZL1s have the RS package.

[@molo1706]

no way I just checked and it says out of stock

[@eaglezfan1185]

🙌🏽

[@slothin21]

I totally thought they included the LED reverse light with the blacked out taillights. WACK!

[@Lethalgarage]

+James Friedman nope

[@theman_himself]

Same here! Didn't bother getting the LED reverse light as I naively assumed it would be included with the OEM alternate tail light! It was a hassle to get the darn harness off. The thought of doing that all over again to install the LED reverse just makes me think if it is worth it at all.

[@theman_himself]

Never mind. Only had to do the driver side and the harness was easier to pull out rather than the jacked up harness on the passenger side. Was quick and easy and didn't have to take tail light out for the passenger side!

[@davidkrye]

Out of stock right now.

[@Lethalgarage]

+David Rye Looks like a lot people wanted them :(

[@davidkrye]

LethalGarage I'll keep trying. I want this.