Review + install Holosun on Canik Mete SFT

[@vomact1052]

You should have used the countersunk screws that came with the Holosun. They are the same as the screws that Canik supplies and they fit FLUSH.

[@mysteryour1815]

Canik's manual doesn't recommend using other screws, I noticed a slight difference between Holosun's screws and Canik' screws.

[@jonwagner2150]

@@mysteryour1815I have the same gun and same optic and used the screws that came with the holosun and no issues at all I didn’t notice any difference

[@eddiearchuleta615]

Just a tip you don’t need a big window on a red dot as you aren’t supposed to be looking through the window to begin with you focus on the target and the dot will superimpose on the target making the gun etc look transparent

[@JacquieSchraffenberger]

Great video!!! This was my exact situation with my canik mete sfx pro. Nothing fit unless u removed rear sights which I refused to do so I could co- witness. Thank u

[@libertysadvocate6485]

A “Sig Sauer Romeo” also fits perfectly. Yet it is also very small.

[@WisSota_Boy]

Calculated Kinetics has an RMR adapter. Currently my SF Mete has a Holosun 507c and it looks much better than a tiny micro dot.

[@kumbya]

Awesome video, just picked up the 407K in green for the mete sfx. I didn't even know you could co witness with the stock sights until now.

[@Roman________]

Holosun Holosun HE407K-GR X2 Red Dot . This also works it’s a micro as well Holosun Holosun HE407K-GR X2 Red Dot . This also works it’s a micro as well Edit: matter fact the dimensions are a tad bit smaller even. And it’s a green dot

[@SKY13.]

This fits the Mete SFT as well? and making sure they are a green dot?

[@LSDDREAM757]

Can u try the canik mecanik Mo1 please

[@johnnygonzalez9019]

It’s beautiful!😮

[@rik4369]

Great demonstration! I have that SFT too an have been considering an optic for it. Little too pricey for me. Just curious, how much was the other optic on your Springfield? Nice work!

[@TadTrueman]

Holosun EPS and EPS Carry use the same mounting footprint at the 407K

[@joshuakeith4604]

Will this fit the SFT Pro as well?

[@alsolomon]

Can you put the link in the description where to buy this red dog from?

[@mrobinson57]

Why does anyone questions how it "looks" on the gun? It must be durable and work so you can use the tool as intended.... I love Holosun and use their stuff on all of my platforms.

[@TTBOY-mb8tb]

Hi, It goes well with streamlight tlr series...

[@Bubu617]

It does

[@backwoodscharlie8483]

Looks fine,great video.

[@Irfan87]

With this model of Holosun, can you remove the bigger reticle and only have the red dot showing?

[@hasancan]

he literally showed in video

[@Irfan87]

@@hasancan Im an idiot, i missed it. Thanks.

[@kubilaydemirhan59]

Hey bro what’s the exact model of this red dot you put on your canik

[@hasancan]

HS507K its written with capital letters on the box...

[@worthmor5146]

Looks great!

[@jonschlarb7513]

Why didn't you use a MeCanik?

[@tinman3342]

Mo1

[@poindposeidon]

You are not supposed to pull back before pulling the pole down tabs on this Canik weapon

[@divangerber9727]

Looks good you were bitchin for nothing really… sits well on that Canik

[@jonathank8741]

do u know if you can do it on an SF

[@a_frost.]

Yeah you can

[@Talon-6]

Bro you got screwed over by canik cause I got the canik tp9sfx the OG and the plates for the optics are very nice like metal a good size way different than the ones for the mete

[@Bubu617]

You lose the iron sights with the tp9 though right?

[@Talon-6]

Yea but do you really need to co witness with the red dot sights now days? The battery life last forever and I get the holosuns with the solar panels on top so them not working isn't a problem for me

[@Bubu617]

@@Talon-6 yes, I absolutely need to do witness.

[@jonschlarb7513]

​@krishovis2022 always have a back up, shit fails and you don't want it to when you're life is on the line!

[@winstonsmiths2449]

@@Talon-6 If you do not need the plates, the is a GOOD thing! Some people say that it will cause more recoil/force on the optic. I do not know how more force is transferred to the optic. A Newton's Cradle toy (ball bearing suspended by strings that if you lift one side and release it, the last one on the other side moves). Kinetic energy treats plates and optic as one

[@Talon-6]

Bro I've seen the 508t on the mete

[@Bubu617]

With custom plates

[@KingMusa99]

Thinking of 508 t on my Sft Pro!

[@KingMusa99]

Was the 508 t still able to see sights as back up or did they have suppressor sights?

[@Bubu617]

@@KingMusa99 you will need custom plates. and may need suppressor sights

[@KingMusa99]

@@Bubu617 Ok thanks!

[@MAGAWillSaveTheWorld]

Bro!!!!!! Thats way to much locktite, you just need a small dot worth.

[@charlesdavaro8554]

Too small 507 is what belongs on it

[@richardpike]

Holosun is junk compared to the Mechanic red dot made for the gun . Do your homework .

[@kevinli9035]

Doesn't mean all ppl getting Holosun didn't do their homwork....they probably did more than you think. I definitely see the value in them

[@speculizer1971]

@@kevinli9035 😂 Some people just can’t help it can they.

[@justusbryant7366]

Holosun is definitely not junk lol. People are crazy i swear 😂

[@WisSota_Boy]

Calculated Kinetics has an RMR adapter. Currently my SF Mete has a Holosun 507c and it looks much better than a tiny micro dot.