[REVIEW] Nerf Pro half-dart magazines!

I thought this was important enough to warrant its own video!
If you want to buy your own, find them here:
www.amazon.com...

[@IkAAris521]

Glad to see someone actually file off the ridge! Was hoping to potentially invest in these as club loaners and needed to know if they could work in dzp adapters

[@cheesy_cookie]

I was hoping someone would review these. Good video 👍

[@SomeRandomGuy556]

U got transformers? Dope

[@gargunkle]

I have SO MANY Transformers...

[@SomeRandomGuy556]

Cool! Maybe make a showcase vid?

[@gargunkle]

@@SomeRandomGuy556 I thought about it and I might do something like that. When I started the channel I expected to have mixed nerdy content but it's really been just nerf so I dunno. Also the Transformers are relatively poorly organized.

[@SomeRandomGuy556]

(I don't mind) if you were to make a showcase you'd have me view it %100. Oh, and thanks for the vid of the LHTCU. Imma make one sometime soon

[@Boomstickmods]

Really appreciate all the info in this video

[@gargunkle]

I am glad! Be sure to check part 2!

[@botsnblasters]

Good content my dude! Thanks for showing how these can work with other non dart zone blasters!

[@timshooter8033]

This is GOOD info ......Thanks I'll be ordering some of these ,soon !✌

[@DEADMANSFOAM-DirtyD]

Excellent overview

[@_tw300]

I found that on the mags (the ones I got at least) that the catch is .5mm too short. when i compared it to my worker 18 all the dimensions are the same except for when I lined up the bottom of the catch, then the top of the nerf pro was literally .5mm too short and that was enough to keep it from catching in my OFD Meowser. after some filing it fit great

[@gargunkle]

Wow you are totally right. It did not occur to me to try Flycore blasters, but I've now tried about 3 different models I had on hand (Meowser, NPC9, and Al-Miraj) and it doesn't quite catch in them.

[@_tw300]

Yeah I haven't tried it in the adapter that came with my af pro but after sanding it it works great in my meowser though it is ever so slightly wider do to texturing so I can't gravity drop

[@Ch33seYT]

could you cut a hole down the middle of it to see the capatcity or is there something preventing that

[@gargunkle]

I don't see why not. Though you'd have to clean it up well on the inside so that your darts don't catch on plastic burrs or such. I did something similar for my Buzz Bee 20 round full length mags.

[@Ch33seYT]

@@gargunkleI purchased these and they go in fully to my magwell but are too high up too catch. If I cut it lower it might have extra wiggle room. What do you think?

[@gargunkle]

Hmm not sure, which blaster are you using them in?

[@Ch33seYT]

@@gargunkle a stryfe with an out of darts adapter. Sanded down the tabs and it works fine but the catch is way too tight so I’m getting an adapter with a mag release since mine is friction fit.

[@gargunkle]

Interesting, sorry I've never used an OOD adapter so I couldn't speak to their compatibility with that (or lack thereof). I do prefer a mag release over friction fit, at least.

[@LL-wc4wn]

Why the techno music playing in bg? Atleast turn it down to barely hearable

[@gargunkle]

That's very odd, when I watch the video / listen to it, the sound balance is just fine.