Review of the Pittsburgh 1500lb Motorcycle/Atv jack

Showing you how to use your #motorcyclejack #motorcyclelift #harborfreight
www.harborfrei...

[@PainterD54]

You should also check the hydraulic fluid in it because I found some of them are shipped with little or no fluid in them. I found one a guy threw in a dumpster because he thought the jack was no good. I dug it out and took it home. It was just low on fluid. I filled it and have been using it for the past 45 years now!

[@mikeday9699]

You know, the idea about putting those boards under the tires is genius. I’ve been a mechanic and working on my bikes all my life and one of my bikes is really slammed and for some reason I never thought of that. Holy crap, thanks a lot. Now I guess I know everything. Lol 🤣🤣🤣

[@vinsonwalton28]

yeah im stealing this idea from him too

[@Kevinbobevin1]

Just ordered it to do some long-overdue maintenance on my Wide Glide. Your video cut through the BS and showed how one "Everyday" man could manage with the Pittsburgh lift. Thanks brother!

[@EverydayMan]

Thanks for watching!

[@stevieoakes7443]

Thanks for the demo. Beautiful bike. I was checking it out thinking I'd be very proud to have your bike. Very cool, very nice bike. Ciao. Keep the rubber side down.

[@jymebale5545]

I would put a single jack on either side of both front tires of your ATV as I have seen and heard of accidents since the early 70's, great jack, I need one.

[@javyLSU1]

Who Dat! Thanks for the review, nice job.

[@sethsheely9559]

Thanks for the video.

[@EverydayMan]

Thank you!

[@jymebale5545]

You must not be an engineer, I am, an astro physicist, I would have to have both ends of the bike tied off to something damn steady just in case the jack gave and the bike came down on you or me it's happened to me before and a wife called me about her husbands problem, NOT safe enough SIR. I would buy it though and need to, thanks for the demo, keep them coming please.

[@EverydayMan]

The jack has a saftey latch built in. If the hydronic jack fails it will not drop.

[@beckyspeyrer5198]

Safety first!

[@MrGreenejr100]

Thanks for the video! Wasn’t going to get the lift due to the low height of my Softail, It was just shy of min clearance. Great idea of the boards makes it doable! Thanks!

[@EverydayMan]

No problem, thanks for watching!

[@eeoo2062]

Thanks for making this video

[@clongo92]

Just came across this video on HF page, good review and sold me on buying one! Dude you were at 500 subscribers when you put this out, over 16k now !!!!

[@EverydayMan]

I did a little growing for sure!

[@Only9mm]

Do you change your oils on your bike or take it to the dealership? Is the jack good for that or just chage the oil as it sits on the kickstand?

[@EverydayMan]

I change my own. The bike has to be level to fill up the primary oil. So the jack is needed.

[@Only9mm]

@@EverydayMan Thank you for that, i just hit 4k miles. Im headed to HFT to get one.

[@bayouboattrash]

You wasn't kidding, I was nervous for you watching the bike go up. Lol Great review!

[@EverydayMan]

Thanks

[@ChicagoGirl18]

Hi, I'm looking for a jack to move my victory around the garage for winter storage. will this work? if not, what would you recommend.

[@EverydayMan]

As long as the floor is smooth this will work.

[@ChicagoGirl18]

@@EverydayMan Thank you for such a quick response. Cheers!

[@Jarhead6]

Thanks!

[@EverydayMan]

No problem, thanks for watching!

[@AdversaryNemesis1124]

Bro great video and thank you! Question? Can I do my oil changes with this jack?

[@EverydayMan]

That should be done on the kick stand.

[@AdversaryNemesis1124]

@@EverydayMan Thank you Boss

[@wjb111]

Seems most people have issues with the bike lowering too fast on the jack. Yours is slow and smooth. Same bottle jack oil or did you replace it?

[@EverydayMan]

Its the original. It works very smoothly.

[@theblackarrow]

I’m looking for a replacement bottle jack but no luck anywhere. Any help is appreciated!

[@lance8280]

Are you able to do 3 hole oil changes while motorcycle is on this jack ?

[@timothyperry7760]

Right On Man and Ride On Thanks Tucson Tim

[@peterbergeris6510]

You replied to two questions regarding changing primary oil. You told one it has to be on kickstand n the other it has to be level. Which is it.

[@EverydayMan]

Sorry I messed up. To my credit this is a jack review. Not a how to change your oil video. The engine oil should be filled on the kickstand. I'm pretty sure if you can reach everything on the jack then you can use it to drain your oil.

[@karlhoffmann8915]

Who Dat!

[@EverydayMan]

Hope they do good Sunday!

[@reuben3868]

👍