Review: Pt 1 - Fluke 107 Palm-sized Digital Multimeter

View all my tutorials and videos: www.youtube.co...
----------------------------- Click "Show more" ------------------------------------------
A review of the Fluke 107 Palm-sized Digital Multimeter. I put the Fluke 107 side by side with the Fluke 115 and Fluke 17B as a comparison for part of this review.
www.fluke.com/f...
A 6000 count electricians multimeter.
Some pictures on my forum:
mjlorton.com/fo...
------------------------------------------------------------------------------------------------------
My website and forum:- www.mjlorton.com
Donations and contributions:- www.mjlorton.com
My techie channel MJLorton - Solar Power and Electronic Measurement Equipment - / mjlorton
My Techie Amazon Store: astore.amazon.c...
My other channel VBlogMag - For almost any topic under the sun! - / vblogmag
My VBlogMag Amazon Store: astore.amazon.c...
------------------------------------------------------------------------------------------------------
===================================================
Video sponsor, Pass Ltd - their websites:
At checkout use the discount / promotion code "mjlorton" for 5% off.
www.tester.co.u... - Test Equipment and Test-meter suppliers and
www.calibrate.c... - Calibration and service of test equipment
===================================================
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Bitcoin (BTC) Donations: 1K7PeF55e7ssE7W3WVCoa7c4j2PHzy6ASv
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
**********************************************************************************
Music clip from PatternMusic by Richard Lawler
www.PatternMusic.com
(used under creative commons Attribution-ShareAlike Unported 3.0)
creativecommons...
**********************************************************************************

[@yambo59]

Very thorough review as always. After several cheap meters I picked up one of the newer Fluke 17B+ meters and so far im very pleased with it for the price, its made in china but quality seems good so far. However the worst downside is no warranty from Fluke USA so buyer be aware on the chinese Flukes in that regard.

[@MrSupernova111]

Bro, thank you so much for this video! I'm new to multimeters and I learned a lot watching this. I'm expecting my new 107 Fluke in the mail soon. This will be my first multimeter. Thanks!

[@McKevittS]

That was my first meter as well. Got mine about 9 months ago and it has been great for all kinds of home and automotive work.

[@MrSupernova111]

@@McKevittS . Nice! That's exactly why I got mine! I tested a few things for fun including my car battery. Mainly, I want it for automotive use. Thanks again!

[@Jeff-yd7rn]

Outstanding review, answered all my questions and saved me some money. Thank you

[@lupo0144]

Thanks for the video... Looking for a new meter and this looks just right for me.. Being a Atlas Copco service engineer all I'd need would be checking power supplies and continuity and checking capacitors!

[@marcc482]

LOL... I have a Fluke 107 in my mobile tool box and it works great, also have an Amazon Commercial 90DM600 (very rugged and IP67 rated/ usually at home), an Extech EX350 (355 without temp - great full featured), a Southwire 15190T, a Fluke 87 V, an Aneng 8009 (used as a loaner when some techs are over at our store) and a few pocket “throw abouts” Sanwa PM3, Hioki 3244-60, Zotek 921 and Aneng AN101. All of them great in their own way !!!

[@jeffhachtel]

107 good enough for Arduino/Raspberry Pi? Overkill? Why not "good for electronics"?

[@shanecarroll164]

Thanks for the info. Just ordered one of these as an entry level multimeter for an electrician apprentice. I think it’ll suffice based on the info in your video. Thanks again.

[@MrSupernova111]

Which one did you order and how do you like it?

[@aicisha]

Can it do both "Poff" and "Loff" in the same time if you hold yellow and backlight buttons while turning the meter on?

[@abdelhamidkhattab3325]

Hi MJ I need your help choosing the perfect multimeter not exceeding 50$ I was going to buy a digital multimeter for electronics and power electronics as well but for electronics mostly so definitely true rms is needed and also it would be better if it is an auto range one

[@shawnwaterssw]

I purchased this meter. Does a great job.

[@mikepatterson57]

will this meter measure mili amps on a harley road king? may have bought wrong meter. ;-(( TIA mike

[@janettnajarro4141]

Were can i buy the tbm 251 digital trstet

[@blaisedalbertanson4511]

I work in mining and use this meter in some pretty yucky conditions. It’s a terrific and dependable little tool for the basic troubleshooting I do.

[@drive-channel1834]

How is the continuity test performance? Is it good? Or is it laggy?

[@komphatak3395]

Thanks for the review, can you please suggest best Fluke for motherboard testing ? I was about to buy this one but I won't :-)

[@mjlorton]

Very good point...I should have included the UT61E in that line up.

[@mikeadler434]

Great job!, thank you for doing this review.

[@MWDAdventures]

This video is pretty old and I see they have more meters out. Thoughts on the 101 for checking batteries and continuity?

[@robc8468]

I bought the 106 a good compromise to get the 10 amp port lacking on the 101.

[@Dzorbini1]

For safety the CAT ratings are critical. CAT 1 thru 4 tells you where you should use the particular meter. For general electronics a rating of 1 or 2 is fine.

[@plutoerode]

hello thanks for the video acttually am about to buy 107 now i dropped the idea . my purpose is to measure micro amps in electronic circuit kindly suggess me which one i should buy

[@robc8468]

Plenty of cheap generic meters around to measure microamps. Fluke shines for high voltage high energy work.

[@pinecedar180]

Great video in every way

[@marcucristian80]

Hi Martin! What do you think about Fluke 15B? Is it good for electronics? At the moment I have a cheap one but I want one with Auto range. Thanks. Cris

[@arleyramos]

Very nice video!!! I am getting my tools to start with Arduino, Rapsberry Pi, and that kind of Stuff, and maybe some basic home appliance or equipments at home. Do you think that Fluke 107 do the job? Many thanks!!!

[@DanFrederiksen]

Why not compare to UT61E...

[@Patriot-rising]

I suppose I am lucky as I still have a Fluke 7-600 which most certainly is palm size and couldn't be any easier to use.

[@darxide3382]

Outstanding. Thank you!

[@ronaldtsotsomakays8094]

Thank you so much

[@Pharadoxon]

I understand what overshooting is, but why is it bad? My Uni-T UT61D does overshoot a bit.

[@walterharrington3692]

If your multimeter had for instance a "Max Hold" option, it could potentially give you bad readings. That and it is nice to know that your meter is accurate enough to get the correct reading from the start and not have to second guess itself, I guess you could say.

[@Pharadoxon]

Walter Harrington Ok thx for the answer. My Multimeter has a "Min/Max Hold" option. It seems to overshoot at some Autorangeswitches but i can avoid that when i hit the "Range" button :)

[@nor4277]

I don't think you can go wrong with fluke ,it's the meter all other meters try to compare too .

[@ELXT93]

I'd love to have one 😂

[@DanFrederiksen]

:) It's probably a subconscious thing, noone dares speak ill of the almighty Fluke. Thou shall not speak ill of the high prices :)