[Review] Test the soldering iron melt tin in 2 seconds Alientek T80

After using it for a period of time, I found out that the shell of T80 is made of a solid aluminum alloy rod by CNC processing. The surface is anodized and sandblasted. It has a high appearance, is strong and durable, and can output a full 100 watts of power to the soldering iron tip. Coupled with the compact C210 soldering iron tip, it is suitable for mobile phone repair and can easily deal with large-area copper-covered boards and thick copper wires.

[@OMNI_INFINITY]

Thanks. Can measure the voltage at the tip of that soldering iron and post a video of that?

[@JiDianJiang]

Maybe do it, but it doesn't make much sense. The heating of the tip is a pure resistance circuit. The change in voltage and the change in current are almost linear. So, it is more important to control the current rather than the voltage. The voltage can only determine the maximum current that can be provided.

[@noname-pp4rb]

我喜欢你这娓娓道来的风格。:-)

[@JiDianJiang]

^_^

[@noname-pp4rb]

@@JiDianJiang期待着你的频道未来像我几年前开始关注的成长起来的频道一样越做越好。

[@JimmyWenChannelJ]

100w的電源供應器不難, 但typeC線能撐100w的應該不好找了

[@JiDianJiang]

线材虚标的更是很多。现在得经过满功率实测才能判断是否合格。

[@JimmyWenChannelJ]

@@JiDianJiang 其實我想說的是, 這種portable隨身工具功率也不需要這麼大, 真有60w~100w甚或更大功率需求時, 還是找大隻的插AC電源的比較方便

[@MaPony]

100W 線對面很多很便宜很好買，只是在台灣買會變很貴很貴選擇也少

[@henryt1751]

跟HS-02哪個更適合呢？ 你個人

[@JiDianJiang]

HS-02和T80，感覺上，性能沒有明顯區別，因爲都是C210的標準烙鐵頭，雖然它們的驅動PID參數有一點差別，但是焊接上區別不大。 它們的區別主要在手持的感覺和操作邏輯上面，我個人來看兩個都可以，別人選擇的話，可以根據自己的習慣和對外觀的欣賞去決定。

[@18EL8]

80还是80p更值得买

[@JiDianJiang]

T80用的是C210烙铁头， T80P用的是C245烙铁头， 尺寸上， C245的尺寸大一些， 更适合DIP封装和比0805封装大的元件的焊接。 如果自己经常焊接更小的元件用C210头的T80会更适用。 --- T80和T80P的性能都差不多， 主要区别就在烙铁头， T80的C210烙铁头更小巧， 手持长度更短，更适合狭小空间工作。 --- 你可以描述一下你现在以及未来常用的焊接场景， 我可以帮你从经验上做出一个比较适当的判断。