Revolutionary Air Conditioner!

[@Sattracer]

You remind me a lot of my physics professor in High School. That man was EXTREMELY overqualified for the position he held. He took that job to be available to care for elderly parents. At one point he was the ranking science officer on a submarine in the U.S. Navy and among the first people to go into Hiroshima after the atomic bomb. If you were not watching him as he taught his classes, you missed as much as half of his presentations. It was never "dull".

[@rogerbrandt6678]

Wow you are lucky sir to have known such a man.

[@freddaniali]

As a physicist I would say that your system is brilliant. As an operating and maintenance engineer I would deem this system a nightmare!

[@spencercase5370]

I was curious about maintenance for a scale system like this. Salt water is pretty tough on everything it touches. I don’t know enough to know if there are materials that make this a non issue

[@rogierius]

@@spencercase5370 I work in a marina and all the A4 stainless steel rusts in time. And quicker than one would think.

[@johnq.public2621]

@@spencercase5370 Yes, there are MANY materials than can be used to resist the marine environment.

[@bobomob111]

@@spencercase5370 Naval Brass is about the best thing I can think of unless you are running cathodic protection

[@kaufmanat1]

@@bobomob111 lol, you obviously know NOTHING. Sir, do some research. Vibranium is far superior to marine brass, as is adamantium. You could also use unobtanium in a pinch. Dargontine also works. Sharks also last about 70 years and they don't get rusty, so could just use sharks. You could also use a non-corrosive, cost effective material known as platinum. From what I've read it would last a long time underwater. I Don't know why we don't make everything out of platinum honestly. People seem to like it.

[@JudeJohnson]

Sharing liberating technology that is within the reach of any consumer is something to be commended, but you also taught us the technology with the reductionist brilliance of a gifted middle school teacher. This is one of the most revolutionary acts of resistance that I've witnessed on KZbin since I've been sentenced to lockdown.

[@therbeeo5364]

^ This comment is perfect ^

[@javiersierra6887]

this technology has been in use for a long time

[@IndyRosebush]

@@javiersierra6887 Tromp ac is even more efficient.

[@spacecadet0]

Fairly sure the swamp coolers used in desert or low humidity areas are the same.

[@digitalradiohacker]

@@spacecadet0 Almost, but not quite. Swamp coolers trade humidity for temperature. For them to get rid of the heat energy, they change the state of water from liquid to vapour. That means you get cool air, but humid conditions. This system "gets rid" of the humidity as well as the heat.

[@chblabah]

Please add more content around this topic, there is the huge community around DIY camper van builders out there just waiting for something more efficient that can be used in a camper van.

[@taterboymemphis]

Mr. Rogers, Bob Ross and Mr. Wizard morphed to create an intelligent, kind teaching engineering scientist. A joy to have come across this!

[@sclm55]

Thank God - the One that created the Universe - your list didn't consist of "Mr. Rogers, Bob Ross and 'Bill Nye the Science Guy'. I can respect then what you are saying. Cheers.

[@rcwrecker78]

@@sclm55: do you know what Bob Ross, Bill Nye and, Mr Rogers have in common? There’s evidence they existed.

[@wehiird]

I’m really getting some Robin Williams in there too

[@Terkinstein]

@@sclm55 Mr wizard is a national treasure, Bill Nye is embarrassing.

[@kevinbissinger]

@@sclm55 You should ask yourself why you're so obsessed that you're injecting your own controversy into where there was none, so you could be grateful that it wasn't there to begin with...

[@fuckthedumbsh1t]

This is the science teacher we all needed as kids

[@rabbimuftibischoplordkekpr7617]

*yep, clumsy wrong science is all you need*

[@fuckthedumbsh1t]

Thank you comic book guy from The Simpsons. "Worst Science guy.... EVER!!!" Leave the poor guy alone. What are you doing with your life

[@stevewalston7089]

@@rabbimuftibischoplordkekpr7617 There was not anything that was clumsy or wrong about this, but we await your video attempt at showing what you thought was wrong. Currently your channel has no content, I wonder why? Thanks for wasting your time here, now please go elsewhere with your negativity.

[@beboshi69]

@@rabbimuftibischoplordkekpr7617 Kek would not be impressed by your ignorance.

[@BasiCommonSense]

science its not its madness.

[@sytzebuz]

My first few thoughts after getting to the end of the video was: Who is this guy> ...and ... He made me watch 33min and not for one second I was bored...

[@lxOFWGKTAxl]

Dude my thought EXACTLY, i just wish my father was like this. No need for school, wake up and ask whats on your mind today?

[@rekaviles]

didn't even realize how long the video was until I read your comment.

[@sfurules]

Subscribe man....there's some GREAT videos in their history. I like the distilling one's, personally

[@sfurules]

@@lxOFWGKTAxl Go check out the videos on their cheap speakers. Life changing.

[@wladimirevangelista]

Me too...

[@danielbishop62]

I think this is a water-based adsorption chiller, would be great to see relative humidity readings on the inlet and outlet. Cool stuff

[@TheMinecraftACMan]

It's a DIY Brine Chiller.

[@axellno1759]

It is impossible to stay as cool as the main presenter.

[@Mr_Wh1]

He isn't just cool. He is frosty.

[@jagtan13]

Carefull now frost bites! 😅 I'll show myself the door

[@cwiemers5037]

Kinda like the bromide based system I used in the Navy... scale it up to 12" DWV pipe and its on.. solar power system incorporated to this... construction starts tomorrow morning when menards is open... thank you

[@Bennu3924]

/\----Legendary comment

[@swengross46]

Super size bio balls!

[@Defeshh]

One of the coolest channels out there, no pun intended

[@HowToOverthink]

I trust your sentiment but call BS on the "no pun intended" ;).

[@ernesthamm1813]

So true. Love this channel.

[@jerotoro2021]

@The TacomaKid For some reason I read "Patrick Batman" and was imagining Patrick from Spongebob as Batman.

[@bobdobbson3871]

RIP Big Pun

[@unlokia]

Erm, that's NOT a pun. Trust me, I am English 100% - we *invented* puns. :)

[@joshuareeves9985]

Clever engineering. Clear explanation. I sift through KZbin rough to find diamonds like this.

[@TechIngredients]

Thanks!

[@playaspec]

@@TechIngredients You desperately need to set up a forum where viewers and builders can exchange information and document their builds. It's not enough to demonstrate the principal. Take a look at +EEVblog for how to do it right.

[@Linktw0]

I used to do the same thing in the past... These days I just go straight to the Techingredients channel and pick from the list...

[@vizlidin]

He should figure out how to tell his story in 3 minutes instead of 30. That would make his awesome tech really go viral!

[@joshuareeves9985]

@@vizlidin 2x playback speed helps! It's bizarre at the start but the brain accustoms quickly. I pretty much watch all non musical content at double speed now.

[@2old._.]

"The higher the cop, the more efficient the unit is going to be." Been tryna tell my local PD about this for years! Jokes aside, incredible work as per usual! Thank you for everything you've shared with us over the years.

[@Belladonna_Soul]

My driving record would agree...

[@thereaction18]

Cop: Dude, I am so high right now! What's in these donuts? Partner: Trust me, it will make you more efficient. Cop: Cool! Partner: Yeah, that too.

[@justingriffin2546]

Are you Philippino? the only people i know who say 'tryna' are my pinnoy friends... im in cebu,are you in phil's? im working on an AC project, been TRYNA find the student in Phils who invented AirDisc technologies without success...lots of articles but nothing concrete...Id like to create an amalgamation of the best tech and start a company...i'm Australian btw...

[@DeLewrh]

@@justingriffin2546 tryna is a regular internet expression.

[@justingriffin2546]

@@DeLewrh Then i'll Tryta use it myself....Thanks.

[@Kiptanui]

Just amazes me how eclectic you and your sons knowledge is. Would have loved growing up in your household.

[@EnpuerKT]

Alan Matthews I wish I had a neighbor as smart as him

[@frankb5728]

is this the son's dad?

@@EnpuerKT It's just a shame that the next door neighbor could be half a mile away. I'm a maker by heart, but I don't have the tools, the room, or the money to do it at the moment - I would *love* to have somewhere to go where I could just bring my own materials and ideas, and talk to the rest of the people there.

[@jimviau327]

Mikkel Højbak : That makes two of us, at least. :)

[@jnoland13]

@Mikkel Højbak & @Jim Viau I third that motion too

[@sonovoxx]

Unreal. Every time I came up with a gotcha question, he answered succinctly and comprehensively within seconds. Such a great demonstration. Top class, and easy to follow.

[@YouCanHasAccount]

Anyone aspiring to build or experiment with non-closed loop air conditioning systems in residential areas need to be aware of the dangers of microbial growth including legionnaires' disease which can be fatal.

[@NotSoCrazyNinja]

Don't forget mold. Where I live, anything that stays damp for longer than a few days gets mold. The mold spores outside are incredible. No matter what I do, they still get into the house.

[@samhodge7460]

Would it be possible to add a chlorine system like they use for pools?

[@scottmichaelharris]

That' CaCl system is dehydrating and therefore antibiotic.

[@jenheath9382]

I wouldn't want my home smelling like a swimming pool as the chlorine evaporates into the air-doubt that's particularly healthy to breathe constantly either. Could add a submersible UV sterilization lamp to the final output tube to kill off any microbes before they exit. Would add to the power consumption, of course, and who knows how much heat it might put off. I doubt much would grow in the desiccant side, though, with such a high salt content.

[@helm311]

Would it be possible to use a UV system in your stacks to help with microbial growth?

[@MatthewFinchest]

I absolutely love how much engineering is jammed into this short video.

[@rickdeckard1075]

idk, the airflow turbulence introduced by the bioballs seems like it should be addressed

[@lucasallen5349]

airflow turbulence will only be a factor until the system is filled and at pressure. in fact, that turbulence is what assists the interaction between water and air crossflow.

[@rickdeckard1075]

@@lucasallen5349 i need either high-speed cameras fluid demonstrations, or reputable CFD simulations.

[@2crayz]

This aint short dawg

[@Zoroaster4]

It's just amazing to me what US humans can figure out just by adding to the previous generations discovery. It's like layers and layers built on top of each other starting thousands of years ago with stone tools.

[@longwildernesswalks]

This is the kind of material KZbin was made for. Not the tidepods.... Excellent work sir, excellent work.

[@daw162]

It would be lovely if that was the case, but if this had advertisement for 10 companies in it, youtube would push it 10 times as hard. Unfortunately.

[@whosethatguy6]

It was made for both, son. Tidepods and science go hand in hand.

[@Chrislk1986]

We don't talk about Tide Pods...let it die.

[@nznegativeions]

@@Chrislk1986 tide pods

[@Chrislk1986]

@@nznegativeions Thank you, Jesus.

[@WthyrBendragon]

I would LOVE to see a PDF summary of this layout showing the material flows and generalized componentry.

[@pantherone1742]

I agree...

[@jtbrock2562]

Yes please

[@cartermack1216]

I had created a rough PFD of the process a while ago, I'll see if I can find it!

[@williamrdesilvey7853]

@@cartermack1216 Would love to get a copy of this myself!

[@Goonabasec7]

@@cartermack1216 yes please do! I'd love to build this.

[@samlenlap]

Sir the sheer amount of details & knowledge you have about your projects is amazing

[@patman0250]

Anyone can obsess over absolutely nothing.

[@GoogleModerator]

Not to mention the tools and supplies that appear to be at hand, thank you for your uploads. Excellent content.

[@macrumpton]

I think this project was a high point for the channel. What would make it even better would be to develop it further and make it simpler, cheaper and easier to construct and then offer plans.

[@hanswerner6882]

would be a great video series

[@OmarEwert]

Even portable!! & on a solar battery system for use during outages

[@Lunatic5306]

And posted all on KZbin before getting any patents

[@VictorSanchez-sz6tn]

Jesus how much cheaper it needs to be? This was less than 100 bucks on all the parts that actually doing thr work

[@paulscott2502]

The world needs more people like yourself pushing knowledge. Excellent video.

[@LordAthens]

@@VikingRul3s This is significantly more complex than a evaporative cooling, on a number of levels. Past that, evaporative cooling (like your "bong cooler") has been around since at least the late 1800's.

[@allenmueller]

Even with how direct and succinct he is, the videos tend to run around half an hour or more. Half an hour of me on the edge of my seat, with my notes open, and a laptop ready to add things to various shopping carts. Don't watch any of this late at night - you'll be too inspired to sleep. xD

[@kenibrah9603]

Too late it’s 2 am

[@sufisariyan6781]

Bro I already watched this like 10 times ahaha.

[@allenmueller]

literally - and figuratively - cool af 🤣

[@DarkRedman31]

That's exactly what I'm doing, watching videos on this channel I just discovered and I'm pleased. I'm taking notes the Zettelkasten way on the app Obsidian! :)

[@MagicLeavez]

You should add a part list with Amazon afiliate links in the description. Would help you get a small kick back and help people who really want to build this contraption. Thank you

[@jonrok8576]

Seconded!

[@blooiefps9304]

Thirdeded!

[@gregwagner6647]

up

[@BeaulieuTodd]

This isn’t something you’d just build as a kit. It takes initiative, ambition and curiosity to build something like this.

[@grabasandwich]

@@BeaulieuTodd or necessity? I read that Anchorage is abnormally hot right now, and they don't have air conditioners.

[@TexasT554]

I’m not going to build this, but every time I watch one of your videos I’m just a bit smarter than before. I find you entertaining as well as educational. I’m glad I found your channel.

[@TechIngredients]

Thanks and welcome!

[@lastBullet911]

@Tech Ingredients i'm an ventilation engineer and i really like your basic idea of that air conditioner. But i have to mention two things. First of all you can't calculate the watts of cooling by measuring the two different temperatures. You also have to measure the humidity of the inlet end outlet. You must calculate the coolingpower by the difference of enthalpy. The second thing is, that you have liquids (warm liquids) in a circulation, that are in contact with your airflow. That could result in a hygiene problem. Keep on going with your really cool ideas :)

[@youthised58]

So; what do you think, is it more efficient and worth continuing?

[@aitch9053]

The entire system would need to be completely sterile, yeah. All I could think the entire time was "Could you imagine trying to clean that thing?" Sponges evaporating on warm grey water, eugh... Cool concepts, neat idea, but I can't imagine how it would work for longer than a demonstration.

[@lastBullet911]

@@youthised58 I'm sorry but i'm not able to say if that build is more or less efficient, because i don't have the measurements. In the part where he calculates the COP i also miss the integration of the heat from the burners. This energy isn't free. To your last question: yes i think its worth continuing. The idea is great, but he should get some help with good scientific knowledge to get it accurate.

[@RangerRick97]

I thought that with the CFM (cubic feet per minute) and Delta T (sensible thermal difference) you can at least calculate the sensible BTU's of this. Once you have the BTU's you can covert them into watts by dividing it by 3.412. this is just the sensible heat in the system not the total. Also could the hygiene problem be fixed by adding some sort of cleaning agent to the water flow( without it affecting phase change properties) I don't know enough to determine if this applies to this system or is accurate. I would love to know more if you could shed some light on the matter.

[@elektrotechnik2011]

For your second reasonable doubt, that there could be hygiene problems with warm liquids in contact with the airflow, I think I have the following solution (though it is a thought experiment): One could use a heat exchanger. This would preserve all the non-hygienic parts from the airflow itself and you had to clean only the condenser occasionally.

[@PerryCS2]

I was expecting junk science, but was pleased to see someone who knows how things work in the Universe :)

[@Vir9il]

Yeah this channel is the real deal.

[@KabelkowyJoe]

Actually its junk science, cause he invented the wheel again. It's commonly used cooling system in factories all over the planet. Not just by one "german company". He spent lot of time on something as simple as fuck fulfilling absolutly definition of what junk science is all about.

[@digitalcurrents]

@@KabelkowyJoe That's not the definition of junk science at all. If it's junk science, it wouldn't work. Junk science is like nanotechnology-based food containers that prevent food spoilage... that are simply plastic Tupperware.

[@WolfA4]

@@KabelkowyJoe He spent a lot of time explaining how to take a sophisticated alternate form of cooling an environment and recreate it using affordable and easily acquired items. If you don't understand why that would be useful then the video is just not for you.

[@dnoloc]

@@KabelkowyJoe you're absolutely right. Here is a link of a company that does this since the 80's www.munters.com/en/areas-of-expertise/industrial-drying/

[@theducklinghomesteadandgar6639]

I have an air conditioning background. I am so happy to see people finally developing something that is more efficient and getting away from what is allowed for refrigerant usage!!! I am also glad to see the ease of creation so most anyone wanting to can create themselves and thus saving money on installation and utility bills can do so!!! Awesome!!! The systems as used today are very inefficient when other alternatives exist even using systems similar to current build but again are refused usage for similar reasons as to why we are almost stuck using fossil fuels....money and power!!!

[@staywhite6332]

Fuel is not made from "fossils". Lolz Exxon already admitted in the 80s that oil is indeed abiotic, regrdless of all of the liberal militant mantra that it isn't. Liberals don't drill and refine oil. Exxon does.

[@glennedward2201]

You have the best KZbin Channel. You speak clear and concise and capable of explaining without the unnecessary technical lingo so you keep viewers engaged. This approach is so underrated and passes knowledge that can actually be absorbed. Thank you.

[@glumpy10]

You sure do invest a lot of time effort and an amount of money in your vids. Quality presentation every time. A privilege to watch.

[@CheapSushi]

Well it helps when you make a lot of money off KZbin thus making the effort effective.

[@RealisticAlternatives]

@@CheapSushi At approximately 6,500,000 total channel views (as of this comment) they are not making any money. Look at the type, quality and expense of the gear they're using. This channel might, eventually, make money but that's clearly not the focus. To suggest otherwise is just petty ignorance.

[@Askor200]

Hey mate hope you're well, haven't seen you upload in a couple years! Always enjoyed your content

[@glumpy10]

@@CheapSushi I don't know what he makes but I'd be pretty damn sure you wouldn't be interested in buying the materials and spending the time figuring out and building something like this for him for what he gets out of the Vids.

[@glumpy10]

@@Askor200 Trying to get back into it. Have a couple of vids I just need to edit and post.

[@StriperNight]

In place of the bio-balls or wadded up plastic bottles you can use plastic dish scrubbing pads from the dollar store. There's even more surface area in those than with the bio-balls. I've used them to make bio-filters for aquaponics when I raised tilapia.

[@Lyle-xc9pg]

"Raised" and then eaten

[@LiLi-or2gm]

@@patrickwatkins7572 It's tacky to use someone else's video to promote your own, totally unrelated build- especially some sort of "over-unity" BS. To make matters worse, you've said nothing about the really nice work presented here. It's insulting, actually, and no, I won't be looking at your BS and I urge everyone else to ignore you, as well.

[@sligovolts]

@@ZiggleFingers I take that you don't own a computer or phone or any other electronic equipment, right?

[@sligovolts]

@@ZiggleFingers I stand corrected

[@MrMunjacake]

goooood suggestion !

[@Bennu3924]

Bless you! From the bottom of my heart I thank you! You have made a video I can only describe as, well written, incredibly shot, so elegant as to not waste the viewers time & with such valid science brought to the common man that you deserve far more then a KZbin channel. Thank you for you service sir, I commend you.

[@isufan89]

Id be surprised if its just for youtube. This guy has a prototype that could be huge

[@adeshas83]

I concur

[@tinymud3324]

I did 3 years of Physics in University and never used it - Ended being a Railway Traffic Controller - I'm amazed with your channel ;o)

[@davidhumphries7092]

Bro! Hold my beer! I live in New Mexico we use evaporative coolers to great success by drawing hot dry air over water soaked pads, Temp drop of over 30 degrees! Works great! Only thing is it adds humidity to the cooled air. But when your humidity is 14% you don't notice it. And you use a lot less electricity!

[@polylight]

Sometimes I wonder about putting an evaporative cooler in the vicinity of my external compressor, to lower the ambient air it has to work with when it gets >100 or 105 degrees (California, dry heat). We can't get the house below 78 in these conditions. I can't find anything on this approach online, so maybe it is less effective than running the evaporative cooler indoors directly. I have tried misting and it does drop the temp a couple degrees, but can't be good for the health of the coils.

[@JeremyNyberg]

*Cries in 90% ambient humidity.

[@daniellawson5127]

@@polylight a small sprinkler system spraying the condenser would work better, liquids have better heat transfer/absorption than gas. Very light water spray onto the condenser would really help on hot days, wasteful on days where it's not necessary but a very simple fix for days when you absolutely do need it. Let the condenser evaporate the water you'd use in the cooler.

[@polylight]

@@daniellawson5127 I've tried this and measured air temp drops with an infrared gun and it totally works! Can't remember the numbers but the drop was over 10 degrees in the ducts. I just worry about gunking up the coils with calcium and whatever else is in the city water.

[@daniellawson5127]

@@polylight they make coil cleaner for that i think you might have to get that from a ac supply house, or you could also use diluted clr, and that stuff really eats through deposits.

[@no_tread_]

I can't watch this, it makes me want to make a Home Depot run.

[@davidjones8942]

And, as always, spend a bunch of money....

[@jrcicirello]

IKR

[@jahnkaplank8626]

why? just to buy a bunch of PVC pipes and then have no idea what to do with them?? lol

[@venezia7252]

thats what i would like, a parts list. i am wanting to do this as a model in my shed.

[@mommabig4270]

😂

[@sswpp8908]

6:37 Snow outside, the voigt tube speakers aren't completed yet. Looks like this video has been in the works for some time.

[@fzigunov]

Snow outside also means he has a lot of dry air to boost up his "efficiency" =)

[@MurphysLawUs]

Canada.

[@rolandamurao6500]

I have the same concept of air-conditioning using latent heat of evaporation and I am happy to know somebody is also experimenting on it. I thought of that dessicant to dry the air but it will make the system complex it adds heat to the system that you will reject again later, lowering the system efficiency. Just make a cascade system. Separate the cooling medium and the air to be cooled so there is no need for dessicant. Natural dehumidification will occur just need to reach the dew point temperature. You can further improve its efficiency by removing the blower for the swamp cooler and put thermal stack (solar) on top of the swamp cooler discharge to draw air from the cooler (can be combined with blower when there is no sunlight). This system really works. Making the equipment smaller is the challenge.

[@overlycreative1]

I saw the rudimentary version of this being played by The Blue Man Group in Vegas, it was very cool.

[@ArtificialCloud]

heh, very cool

[@m3chanist]

Ha! brilliant.

[@baganatube]

This one is cooler and has more fans.

[@hellshade2]

@@baganatube LOL!

[@gold8056]

For anyone who claims they've made a free energy device, I want a detailed demonstration like this

[@CynHicks]

Lol... wait for the punchline.

[@dhebert111]

Yeah, I wouldn't hold my breath brother. Lol

[@Maples01]

No such thing, if there were your municipal electricity provider would be using it to produce electricity to increase their profit, arguing against that fact would be foolish

[@gillenzfluff8380]

It's called a windmill.

[@Maples01]

@@gillenzfluff8380 You'll fall for anything then, never seen the birds killed by them, the waste byproduct from their construction, or one burn up because it didn't get shut down before a storm, lets not forget the trees that must be removed from the location

[@stevealexander8010]

I really like the presenter speaking skills, but a diagram would be helpful.

[@i-love-comountains3850]

That and a parts list.

[@stevealexander8010]

@@i-love-comountains3850 not exactly, but it's hard to follow what happens in each column & tray.

[@manp1039]

I was thinking the same thing. And also he could do a diagram with some animation to help illustrate the flows and morments of air and water.

[@nissehult5021]

I gues its patent pending

[@joonasfi]

AFAIK you can only patent something if it's not public yet

[@bramweinreder2346]

This could very well run on a tiny solar cell! And I also like the idea of using a solar based thermal collector. I would just scale this up (five or six running parallel), put it in the attic and lead air ducts to every room!

[@JanHoos]

Yes, that would be an awesome way to use this :D

[@ses4068]

Nah, you can't meter it and suck money out of the masses with this system. The initial costs is also too low, we can't justify a high price for it either by claiming the material or the complex (actually simple) design or development costs. Another competitor would out compete us. Just maybe if we can get the patent first that is, might as well put in a safe to be never released so we can keep selling our huge stock of inefficient, metered cooling systems perpetually, which need to be changed and maintenanced from time to time, cashing in one more time from these suckers.

[@bramweinreder2346]

@@ses4068 there's a difference between value and expense. And it does take skill and planning to integrate this in an existing house effectively.

[@ses4068]

@@bramweinreder2346 it never occurred to you that almost everything mankind designs starts big & bulky most of times and only with time & demand most technological design get smaller and portable? Really?

[@bramweinreder2346]

@@ses4068 technology scales. Physics don't. I don't really see the point of the question, but I also don't expect this system (including the air columns) to be scaled to the size of a backpack ever and still give the same amount of cold air. That's simply not how it works.

[@Fallen7Pie]

I love the rampant use of PC cooling parts in all your projects. Should consider going to LTX this year to get this channel more exposure. The quality is so high more people just need to see it

[@MrBuggitt]

Would love to see a demonstration of a project there

[@Fallen7Pie]

@@MrBuggitt yah, bring a computer with some novel cooling solution there and exposure is a sure thing

[@EggBastion]

_"So is that on air or liquid?"_ _"...well"_

[@austinsears1637]

Noooooo.... Keep it as secretive as possible!!! Plz do not inform the masses!!! Seriously tho, it needs to continue to be one of the best kept secrets!!!

[@AaronAlso]

I live in a humid environment and have long since wondered what could be done to a "swamp cooler" to make it work in my area. Now I know. Great video, brilliant science, thanks for sharing.

[@mikelang7425]

If it's modestly humid this could work pretty good but the dehumidifing will be less effective as the humidity increases, I think the system will start to fight itself in more oppressive humidity

[@parmindersinghnokewal4215]

This is my favorite channel on KZbin....!!!!!!!!!!!!!!!!! And I feel proud saying that....

[@kevinwoods160]

Wow! I love that there’s people like this in the world. It’s why we have the world we do. So much passion. Thank you! Love it!

[@elcarpinterodepichicuy]

I just want to extend my deep appreciation for the effort in making science more achievable for all of us. It is always appreciated to learn a little more every day about everything that surrounds us and how it works.

[@brw3079]

Fascinating! And it is refreshing to find a KZbinr who speaks in precise, cogent, grammatically correct English. Double the efficiency of an air conditioner, without expensive exotic high technology? Put it all out in public for anyone to copy? What generosity!

[@fed9931]

I love the voice and pacing of the speech, not to mention how clearly he moves from idea to idea. Truly captivating presentation on a topic I care little about. Please, consider becoming a professor. You would be a vast improvement over many of mine.

[@EnFuegoDuo]

...Please tell me you see the irony of your statement. If not, then it makes sense that he's NOT a "professor" given that would put him in an environment where the ability to identify blatant logical paradoxes is absent.

[@fed9931]

@@EnFuegoDuo rude

[@EnFuegoDuo]

@@fed9931 You seem to take this as a personal attack for some reason. I'm simply stating that your university has failed to teach you vital critical thinking skills by pointing out the logical paradox of your statement. I should have made more clear that I don't fault you for that necessarily however, it is distressing that instead of addressing the error in your logic, you reply with an ad hominem attack. I pointed out an empirical fact based on your statement. I highly advise studying logic and philosophy to help arm yourself with the tools to identify and avoid sophistry. Here is an olive branch of knowledge to help hone your thinking as it has mine: kzbin.info/www/bejne/bJaqeHqtp71-i6s Cheers.

[@randogame4438]

@@russiannpcbot6408 Well played good sir!! Well played!

[@pony_OwO]

@@EnFuegoDuo lmao what logical paradox do you even think was made in the first place??

[@tommybronze3451]

Hey - here is an idea: a final stack where you evaporate water in pre dried air. How about actually making the final stage a closed circulation and use water from it to be pumped into another radiator that takes air from the house and circulates it through it ? That way there is no contact of water and air that is being used for living space, so there should be no concerns of contamination. A small header tank with a floater could be used to replenish water directly from mains - after all water will be captured by desiccant and evacuated from the desiccant dehydration loop. Also I would suggest adding few coils of platinum here and there to inhibit bio growth in the system.

[@newoneinblack]

Copper not platinum.

[@tommybronze3451]

@@newoneinblack actually silver not platinum, but thank for pointing it out.

[@newoneinblack]

@@tommybronze3451 Copper is incredibly bactericidal as well. Studies have been being conducted for a few years now in hospitals etc. using copper or copper clad surfaces instead of bare stainless steel and found very promising results. And much cheaper to get results than the more rare and expensive metals.

[@tommybronze3451]

@@newoneinblack and all those pc enthusiasts having a biological growth with their copper cpu blocks are just imagining stuff ? you want to kill bacteria AND fungi, and copper doesn’t cut it.

[@aaroncameron1494]

Next video: "Hi. You might be wondering what this is. It is an oil refinery"

[@aarondcmedia9585]

My exact thoughts.

[@gordslater]

"...with tropical hardwood inserts in the fractionating column made from reasonably priced, yet commonly available tropical plywood. This gives it pleasing acoustic properties so it can double as an efficient horn speaker"

[@JohnDobak]

Is NOT an oil refinery.

[@delsonjrdd]

@Ringo Garvin *oil powered solar refinery*

[@Robert_McGarry_Poems]

"Today we have a DIY ultra-high frequency centrifuge for separating the tough stuff."

[@edwardiuliano58]

Water is a truly a remarkable liquid. Your presentations are also remarkable. You take the phrase, "Be like water" to heart.

[@iTeerRex]

From its science to its engineering to its manufacturing to its materials to its economics.. full spectrum endeavors. Very cool!

[@tyus1932]

I have been in the HV/AC feild since the 80's...and I found that if you sprayed a mist onto the condenser coil way back in the early 90's, that you could reduce the energy being used on that unit...and I then built a loop to surround my condenser coil..and attached my condensate drain line ( pump ) to the loop to spray water onto the condenser coils when the condensate pump need to empty, and this was short burst of savings...but it did reduce the amount of energy that was needed to power the ac. Now after watching this video, I think that you have helped me with a hump that I couldn't get over to save a lot more money on my electric bill. ( I'm not the most literate guy...but I do understand the principles of how it works..so please give me ) but I'll let you know the results of the out come..boom, thank you for this.

[@charliebennett6335]

What I enjoyed most about this video is it demonstrates the step by step process of invention by observation, asking questions and finding answers.

[@Lagggerengineering]

Meanwhile, KZbin promotes stupid, dangerous and useless lifehack videos... Instead of this masterpiece.

[@ChadDidNothingWrong]

Hey 5 minute crafts saved my life when all I had was a 2 liter of coke.

[@TheErusPrime]

Fun fact: you can pay youtube to promote your video.

[@fourtwozero]

Well they promoted it.. It was in my feed and I've never watched this channel before.

[@lightning2940]

@@fourtwozero yea, same here finally some good content.

[@ABaumstumpf]

This "masterpiece" that is neither revolutionary nor something any sane person would want to have - there is a reason why we use closed loop systems normally and only with very strict regulations open loops are allowed to be sold. But sure, if you do not have kids, go ahead and try it.

[@trevor5933]

Im a tradesman in construction, and this look fantastic. Built with off the shelf components makes this useful anywhere. I noticed how you build the fan ports (very clever) and think I see a way to up the efficiency further. In each of the 3 columns, at the base, there is air restriction from the direction "sanitary tee". Air has to fight back around a roughly 120 degree corner. Clearly, it was used to keep the falling water from pushing out the air fan ports. If that tee was flipped in the columns, the air flow goes smoothly up. Comparatively, it could have a large effect on efficiency, for each stage of the process. The challenge now is preventing water from easily flowing out the fan port. This can be done several ways. At the first joint above the tee, install the bio ball screen across the pipe opening. Just below the screen, make a lip, splash guard or cone diffuser to direct water flow away from the fan port. Most designs can be 3d printed, or made from cutting different sized pvc pipe. That will add in a small amount air restriction, but still a respectable performance increase. It may be worth while to make the columns taller, to offset the 6"-12" of bio ball area changed from moving the screen up.

[@ComteSt.Germain]

I'm so glad that y'all are putting out these very intriguing videos about topics that many people don't even think about. Keep up the great work!

[@SpydersByte]

Who is this man? What does he do? Where did he get this million dollar lab mountain retreat? I have these questions every time I watch a TI vid.

[@MrMacgyver123]

Probably an engineer who does facilities management...

[@ModeratelyTrumpet]

He bought pvc and air duct fans from Lowe's. It's nowhere near a million dollar lab.

[@OldManPaul]

Not sure but it's cool! LOL

[@SLArmstrong]

Regardless of the cost, it's a beautiful lab.

[@TheDukeOfZill]

DIY vids that show you how to build a chair to save money... Provide you have hundreds of dollars of equipment and tools first. Lol

[@TheSoloAsylum]

Why can't we have school teachers like this? Excellent presenter.

[@BlackHeartScyther]

"You may be wondering what this is" An oil refinery! "Its not an oil refinery" Oh damn, this guy is good XD

[@msergio0293]

Oww shit nigga! Hahahaha

[@TheSongManipulator]

"You may be wondering..." God forbid, if you actually read the video title!

[@jcwoods2311]

@@TheSongManipulator It was a joke

[@rdallas81]

@@msergio0293 did you just call him a "shit nugget"🤔

[@sdvma]

@@TheSongManipulator That is what the guy said in the beginning of the vid

[@mohamedlanjri]

Congratulations! One of the best videos that mixes science and green energy or ways to be more efficient and less power consumer. The way you talk to the audience seem to be like a engineer to engieer conversation, which makes it very interesting (sometimes with so basic explanations gets boring). For me as a beginer in this filed it cost me a litle more effort to keep up with the explanation. If I'm allowed to make some suggestions, 1 Make and show some schematics and/or diagrams of the system. 2 If you can team up in projects of this magnitude with someone who can build a control and monitoring system electronically, overall you'll get a merchantable aircon system..... Such a great video!!!

[@Mishaboy2010]

This guy is like a real life Walter White, but a good one.....love this channel :)

[@JuddJadulan]

for now.

[@jtshutzhund6754]

Until I actually read about the real walter white.. I get that it's for the clueless as well as the bit more advanced.. but unfortunately the need to be so thorough makes for hard watching for me.. that get to the punchline or what you got new to say thang.. when we get to where we can cool 3500 sqft in arizona in the summer 115*F ... not need a extra garage for the unit.. enjoy the concept and your effort..!

[@nickslingerland4155]

99.57% pure air

[@csn583]

This is such a played-out cliche for anybody with even a moderate degree of ability in applied science. It wasn't even a major part of WW's character after the first season when entitlement, greed, and revenge took over.

[@cosmefulanito5933]

Walter White IS real. I saw he on TV...

[@OnlyTwoShoes]

This man's workshop is nicer than my house!

[@rayg9069]

Well that's my daily cerebral exercise done, off to watch kittens chasing balls of wool now. Watching these videos just makes me realise how much I don't know, i'm inspired, humbled, embarrassed all at the same time, but mostly I'm thankful to learn something.

[@meinbherpieg4723]

@Mr Brightside Individual videos are better to an extent, but there are still issues with not having course tracks and accreditation, homework, curation and q/a. Also, physical interaction with a professor and peers is essential for holistic understanding.

[@a.1441]

You shouldn't feel embarrassed about not knowing these things! The concepts he's discussing are from chemical engineering and are not something most people would be exposed to. It's actually amazing that your interests brought you to this and that you watched it!

[@CactusHugrAz]

Well said.

[@jameshampton1832]

I hate watching kittens, got any dogs riding skateboards?

[@Southghost5997]

I got so tired of fake videos out there claiming free energy or something unrealistic by someone who knows nothing about thermodynamics or physics. Your videos are a breath of fresh air! Sure, there are some times where I'll disagree but at that point I'll be nit picking over a video that I enjoy so much. I'm always impressed by the technical considerations that went into the experiment or the design of the equipment that's in the video. Beyond that, you are an inspiration! I'm sure there are hundreds, if not thousands, of viewers who just went with an idea that they weren't confident about and made it happen because of this channel.

[@TechIngredients]

Thank you, I genuinely hope so!

[@elijahmoreau-arnott7220]

I'm glad you touched on the burner/heating - the whole time you were doing efficiency calculations I was worrying that you were ignoring the equivalent wattage if the burner

[@lucamusso3551]

And with the burner he is literally heating the room's air

[@belvederebaileycambodia]

fuck...I'm complete... thank you for bringing that up.

[@skipfred]

@@lucamusso3551 The system in operation wouldn't be inside the room...

[@hellterminator]

He's also ignoring the fact his evaporative "precoolers" are releasing heat and moisture into the room, which will in turn decrease the efficiency of the cooling. Of course, given how ridiculously underpowered the system is for the size of the room he's in, it would take many hours for that effect to reach a significant level, so it didn't show in his 30 minute test. As for the heater, equating cost with efficiency is pretty janky. With that logic, I could create the world's most "efficient" AC by simply powering a regular AC with solar panels which give you "free" power.

[@GrandActionPotential]

Assuming the pre-cooler brings the input air temp roughly back to "room temp", I'm calculating pre cooled exit temp at about 19 degrees C w/humidity around 20%. Tech Ingredients.... If you still have the the fixture assembled, measures of humidity for each stage would be helpful to others. Thanks again for another great video.

[@greenaum]

Also when working out the COP, it's not a valid test without including humidity. Although humidity isn't super-easy to measure. Particularly in small quantities of air over short timescales.

[@baxswisher7661]

@@greenaum humidity isn't a factor In determining COP technically. It's determined by cooling capacity of an evaporator relative to energy use of a compressor.

[@radbug]

When he calculates the power consumption he neglects to consider the power output used in the form of the gas used to heat the desiccant.

[@greenaum]

@@baxswisher7661 In this case, since it cools by adding moisture, the humidity would be relevant, since an ordinary AC doesn't add moisture. Indeed most ACs remove humidity, and that's usually a benefit, though it's not part of their stated job. Otherwise any bucket of water would have a COP of infinity, since it would cool down a room by evaporating.

[@freddoflintstono9321]

@@radbug He does address that later in the video - just keep watching :).

[@Brooke95482]

Have you measured the room humidity before and after running this for some time? Also how much energy is the propane flame putting into the system?

[@mailleweaver]

He said it was about three times the electrical wattage used by the rest of the system.

[@AlfieMakes]

It should be ~100W.

[@BrightMomentsNOLA]

Too many energy inputs!

[@tranzco1173]

@@BrightMomentsNOLA Right? This is the most retarded thing I've seen in at least one week. Law of thermodynamics, you can't challenge or beat it. The energy turns to evaporation turns to cooler air, but it's crazy wasteful and not efficient.

[@tranzco1173]

@@AlfieMakes I think it's 69 units of WOO.

[@20bluebug]

I saw an ad today on You Tube from a company selling air conditioners that use a new technology, and it looked like they were using a short clip from one of your videos, and I think it's this one. The advertiser was "Chillwell." I thought I'd bring this to your attention incase they were using it without your permission.

[@DansEuropeVlog]

These guys would be the only ones with ac in a Apocalypse level event.

[@MaddogJones]

Well them and about a tenth of those who watched this video and will try it out... I'm gonna give it a shot.

[@iTeerRex]

Not only ac but they probably have a self contained secret bunker under their house.

[@donalain69]

if the average American would be able to understand what this guy is talking about, there probably never would be an apocalyptic event ( at least not one that is caused by humans)..

[@broken1965]

Run off car batts for days being recharged with solar ofcourse

[@DrTed3]

@@donalain69 Also different politicians running the place.

[@bmjones66]

We mix in a Calcium Chloride mixture into our caliche/dirt roads, so that they pull humidity in from the air and keep the road surface tacky. It helps keep the road flexible and will keep the dust down. It's some pretty cool stuff.

[@fprintf]

Sounds like a recipe for rusty vehicles too!

[@rosstemple7617]

Town Guy Gaming great at keeping down the foliage too. Would never use this around farmers. The run off would kill the soil. In the rain it gets spread in the air and sticks on leaves. Salting the earth is bad.

[@absalomdraconis]

@@rosstemple7617 : Not sure of the effect of Calcium Chloride (as opposed to Sodium Chloride, ordinary table salt), but certainly I wouldn't want to be around that either.

[@gravelydon7072]

@@rosstemple7617 Farmers have been using it for a long time. All of our tractor tires have it in them. That way the weigh more than just water alone in them. Also that prevents them from freezing.

[@rosstemple7617]

Jared Maddox ha thank you. I know bleach is bad, not sure how much the calcium would neutralize it. Thanks again for the catch. For some reason(well ignorance) I thought they was the same. 🤪 LoL

[@TwstedTV]

His children is so blessed to have him as a father. I for sure would be learning so much throughout my life with this man. :)

[@VikingRul3s]

@@PysKa.512 Yeah that's actually trueand very insightful, therefore I've deleted my comment

[@Tylerthomasmiller84]

All of your videos completely blow my mind. Thank you for the time you take to make them.

[@rleeAZ]

I love how your videos make me watch several times, and then send me reading the theory form other sources. Some of the best content on youtube. Thanks for sharing your work.

[@bilalhasansyed7]

What's your reading results? Do you think it's legit? Is there any commercial unit available using this concept?

[@rleeAZ]

@@bilalhasansyed7 Not much in the way of commercial units, bit lots of theory and papers available. This is legit... there are more efficient desiccants than salt... tri-ethylene glycol and potassium formate.... but potassium chloride is the easiest to use for experiemtation and handling. Google "desiccant cooling systems" and you will find plenty to read.

[@TheRainHarvester]

How new is this concept? I'm looking for a diagram somewhere, to compare to my own based on this video...

[@krich106]

Feel I learned a lot, thanks. No clue what I'm going to do with it, but that's the beauty of knowledge.

[@iamnoumankhan]

hahahaba

[@iamnoumankhan]

disappointing right? 😂

[@Midnight24435]

You're free to choose what you do with that knowledge - that's the fun part.

[@superque4]

If you find yourself stuck on Gilligan's island, you're all set.

[@jonjonsson6323]

"Pine" was hilarious and totally sensible

[@5minutebushwalks]

Totally glad I wasn't the only one laughing about that!

[@TimSailer]

The only thing wrong with that is they are usually white birch! :) Made me LOL though

[@alphabroly28]

lmaoooo

[@jackbquick123]

That's above my learning lol but I fast forwarded and missed that

[@okmorenumbers]

i LOL'd

[@BilalKhan-yg9jc]

I love your work and will be looking forward to improved iterations. I saw another homemade ac on KZbin but it was very inefficient, as it used ice to cool water that was circulating in a copper pipe, Infront of a fan. You on the other hand have hit the nail in the head in terms energy efficiency. Keep up the good work! Most of my country is extremely hot in the summer, nearly inhospitable. I've found that compressed stabilized earth bricks are great at regulating indoor Temp and humidity. For flourishing agriculture, the best I can think of is rain water harvesting.

[@plumsmuglers]

Excellent, Just missing the UVC LIGHT.

[@TechIngredients]

Good idea.

[@Th3_Gael]

Is it really required? Wouldnt the osmotic pressure kill bacteria in the dessicant. The same can be done for the swamp cooler could it not. Much cheaper and more energy efficient

[@plumsmuglers]

@@Th3_Gael fungal spores are unaffected by that, it's just a very good practice to add a UVC light on systems like this dealing with air people breathe. Have you ever seen the gunk on most air conditioning systems while in use, there's a dirty oily mixture with a constant supply of dust fungi actually eat that stuff same with computer circuit boards, a simple UVC light says no to all them shenanigans.

[@donalain69]

I been doing some tests mounting an uvc lamp to the radiator of my aircon ( with an aluminium cover that left air pass but blocked the light) ... but gave it up again 2 days later since it started to smell real strange. Uvc light seems to be really potent, but also have lots of side effects... was trying to install it in a wardrobe to sanitize my clothing... and ended up with all my black shirts getting a brown color burnt in where the light was shining on them...and all of them where black :(

[@postvideo97]

@@donalain69 You are creating ozone which is very toxic. You shouldn't use sub 200nm UV lamps, use 254nm germicidal UV lamps, they produce a minimum amount of ozone.

[@AndyLowe]

I think you need to account for bacterial growth (see the origins of Legionnaires disease), but that is pretty manageable. Otherwise brilliant work.

[@random110]

I too worried about this. Though I wonder if the use of the salt solution would inhibit the bacteria growth?

[@DanielDiaz-by7fc]

He mentions using DI water in the system expelling air. Also I wonder if there is a way to incorporate an ultraviolet light in the system to help kill the bacteria ?

[@berserkasaurusrex4233]

@@random110 Add a drop of bleach to the water per quart. That should be enough to inhibit bacteria growth.

[@AndyLowe]

I agree that a drop of bleach per quart and the salt solution should inhibit most growth. Still there are some bacteria that grow in high salinity solutions. An ultraviolet light or ozone system would be effective, but both options use electricity and therefore reduce efficiency. I think another good option is to tightly seal against light where possible.

[@ronejohnson2362]

their people in the south that use swamp coolers they havent cleaned in 20 years, I think bacteria isnt a big issue.

[@antiphlex]

Excellent. Concise, clear, and detailed explanations with supporting evidence in terms of the math and physics. and a working model/prototype. What's not to like?

[@tranzco1173]

I don't like that he turned a cracked out swamp cooler into a very expensive and inefficient AC, while completely ignoring the laws of thermodynamics. Totally retarded, like his styrofoam speakers (which have been around since the 1960's, and always terrible sounding).

[@Stiggandr1]

@@tranzco1173 Who pissed in your cornflakes? I'd be eager to hear you actually articulate your criticism, because right now you're just the nerd equivalent of an internet tough guy.

[@lucasallen5349]

Your closing statement about cost and how easy it is to lower the need for electricity was amazing. Hook, line, and sinker, you just caught a new subscriber. Such a well developed video with such a perfectly set closing statement. Bravo!!

[@TechIngredients]

Thanks!

[@darrenweight5972]

“Pine” - lol Love your videos. Keep up the good work!

[@cell21633]

23:00 "pine" 28:35 "free energy"

[@AdamBechtol]

HAHAH i laughed and came to comment about that too . "pine" ha

[@sclm55]

What an amazing demonstration. I'd love to see this played in some sort of animation video, showing flow of air; colored temperature changing; rise and fall of watts used in the process (etc.) - then the COP laid out (and actual power consumption). AND ALL THIS, showing a comparison between this type of a system (commercially/marketable packaged unit) to that of a typical room AC or the most efficient central AC system out there on the market. Thank you. I'd love to make one for my very warm and humid bedroom at least.

[@glennedward2201]

I like the fact he doesn’t use crayons or elaborate editing. We don’t need more of those youtubers who just want to entertain people who’d never attempt to build one anyways.

[@kazimir8086]

Do you have a PDF on this? I would love to study it.

[@Omar_almatrafi]

Me too

[@realcygnus]

here here

[@KnightsWithoutATable]

Me three.

[@MazeFrame]

Same.

[@EggBastion]

Maybe BigClive can do wee ebay magic word cutting list and like check out some biscuits, or a nice can of gloop - that'd be a video right?

[@bernardputersznit64]

oce upon a time, i wanted to engineer and build just such a system - glad to see how it all comes together - thanks for elucidation sir

[@fishinfreak4374]

So, apparently the youtube recommendation algorithm thinks that I need to build myself a new A/C unit.

[@matthewcohen6650]

fishin freak the algorithms make me learn more

[@johnsimun6533]

Google has chosen you to have air conditioning during the apocalypse. You are blessed.

[@decioolivojr7807]

Mine too....Google wants my wife put me inside that bunch of tubes (in the best option I guess...)

[@JasonBlack66]

or thinks you'd be interested in learning about it

[@antiisocial]

I know right

[@gerbman2004]

When you revolutionize the hvac industry as a hobby.

[@jahnkaplank8626]

him, and ze Germanz

[@akuno7294]

I get it, it's a funny comment, but just for the people who don't get over the fun. This isn't realy new. It is simply not used, becuase you need to scale it up to cool a house and you will use a lot of water for it to stay functional. There are betther systems with solar water panels and/or heatpumps. Or some very interesting system I was able to see live: In the 2 underfloor they hade some massive pipse horizontaly deep into the ground. The ground is there is always the same temp. So they got this air from donwstairs and pump it trought the whole building. It's some huge office space here in switzerland. But sure it always comes donw to where you live, what house you life in and wat you are willing and able to spend.

[@groupchat2554]

@@akuno7294 sorry but those systems require more working capital to install than this consumer level design he has presented here.

[@nunya___]

@@groupchat2554 Fine. Build one. But IMO modern HVAC equipment gives you cheap, high capacity, energy efficiency in a small, affordable package with very little maintenance and lasts decades with routine care.

[@Error_418]

@@akuno7294 if you watched the video you will realise that this has been around for a while BUT his design actually is meant to solve the water problem since it encapsulates the evaporation of the water and recaptures it hence the amount of water required is reduced by a significant amount. about the other issues raised, I don't currently have a counter as this is something for bigger R&D departments to figure out how to scale it in a space-reducing manner but I am sure it is doable.

[@jdtan0]

It would be nice to see the relative humidity in the room and at each of the stages.

[@rgebishop]

maybe the air dryer evaporators could be placed outdoors, or vented to the outdoors to deal with the water vapour these produce

[@jaxonrickel5499]

I think that the idea, considering that it uses descendant to dry the out-flowing cool air. Otherwise, it's just a swamp cooler (as he points out in the beginning)

[@jeep1077]

@@jaxonrickel5499 Yeah but he is cooling the desiccant and the water with evaporation using the room's air. That evaporative cooling would decrease significantly in a humid environment.

[@hakeemnaa]

@@rgebishop dry air from the room then cold humid air then descendant + dry cold air to the room if he insert air from outside, it needs to be always dry air and you will not need all this system because there are water air conditioners in the market which will not cool in humid weather

[@cardguys]

Nice swamp cooler!

[@jonlaban4272]

Perhaps if used in a data centre then the heat for the desiccant process can be supplied by the heat from the CPU's using on chip liquid heat transfer.

[@ssbtoday1]

Most datacenters actually use an evaporative process.

[@johnfrancisdoe1563]

John Laban Keep saltwater away from electronics (it's conductive), electricity (it makes bad stuff under electrolysis) and steel / iron (accelerated corrosion).

[@baronvonlimbourgh1716]

you can just blow the hot air trough a heat exchanger though. No need for water cooling any servers.

[@MrJerryjam]

@@baronvonlimbourgh1716 Can you make a video of that? My room gets too warm due to too many PC power supplies running. I have plenty of hot air in my attic even with roof ridge venting.

[@baronvonlimbourgh1716]

@@MrJerryjam if you put them in a server rack and cut a round hole in the top you can attach a flexible hose and a workshop blower to it. At that point you can lead the hot air to wherever or through whatever you want. Does not have to be a server rack though. An old closet or a custom build enclosure will all do the trick. As long as you make intake and exhaust at the ends. I ran a bunch of crypto miners like that for years and just dumped all the heat and most of the noise outside. Could have easilly put a heat exchanger in between if i wanted. You could even feed outside air into the rack if you don't want to use the air in the room because it does have to replaced somehow which usually ends up being air from within the rest of the house. That can be problematic when trying to heat the house in wintertime

[@stophate2023]

Engineers really are a different breed. I can't quit watching...

[@nustada]

Replace the burner with a focused solar, fresnel or parabolic. /edit:commented too soon.

[@EggBastion]

Or waste compute heat? Probably not much use for the home gamer but in a datacenter with some kinda heat capture system...

[@nustada]

@@EggBastion That is a pretty good idea. Though data-centers have an ideal humidity, not too wet, not too dry. Don't want any chance of condensation or static electricity. So if the air is naturally dry, it may serve triple purpose; but there would have to be controls for excess humidity.

[@m.w.2098]

Yeah, thought of that, then you'd have to have a solar tracker well.

[@ximono]

How about a water-water heat exchange using for example a thermosiphon (solar thermal energy)? Wikipedia has an article on Solar air conditioning, describing a system using dessicants. A PV setup would of course provide the electricity, making it 100% off grid. (I've not seen the whole video yet, he might have talked about this.)

[@mechsm8253]

@@EggBastion This would actually be a Extreamly smart idea for datacenters, the amount of cooling that's spent on some centers is massive, this could potentially be retrofitted to existing centers to make them more efficient.

[@mike289homebuilt5]

Of course - this is very exciting, I knew this had great deal of potential I never had time to work on these type of things. All of the science, lectures and working models im speechless.

[@iampotatoe3245]

Hello, would you mind enabling the "add translation" option, I would like to translate this video to my native language so I can share this video with my parents, thank you :)

[@suprememasteroftheuniverse]

Potatish?

[@TheNugettinage]

@Rose Lee Translation software is not as good as human made translations

[@bashkillszombies]

DON'T DO IT! This is how KZbin figures out what you're talking about and demonetizes you for wrongthink. :(

[@stuffoflardohfortheloveof]

Master of the Universe .....now that was funny

[@ZodiacBlack11]

Kids: it’s too hot today. Dad: Honey, grab the firewood. Kids: For what? Dad: For the radiator, of course.

[@kimatong1166]

He already explained that there is no need for that burner. It doesn't need to be very hot. You can put that radiator on the roof to use the solar to heat it. You can also use that power supply of the fans to heat that too.

[@JoelSapp]

@@kimatong1166 it was funny tho.

[@HPD1171]

@@kimatong1166 you could also use the extra heat generated from people trying to over think joke.

[@Jimmeh_B]

Totally... right?! As a kid. I was absolutely amazed that a fridge could cool things down considerably, by burning Kerosene. Seemed impossible to me.

[@herzogsbuick]

you can go this way too en.wikipedia.org/wiki/Absorption_refrigerator

[@eoincaldwell823]

Can't wait to see version two, with all the efficiencies you mentioned, and suggestion from the comments below, it could even be used for the third world, straight from solar cells. Great job is an understatement keep it up.👍

[@Th3_Gael]

First World use is equally as important. Reducing our energy consumption is going to become paramount in the near future. I say this has global application

[@alexlondell9290]

I used to have a kitchen refrigerator that had no moving parts and was powered by a small natural gas pilot light with a flame about the size of a candle flame. This refrigerator ran for about 60 years without any maintenance. It would freeze foods and keep foods cold like a normal refrigerator, but the refrigerator was about a third of the size of a refrigerator one would buy today. There wasn't a big need for big refrigerators in the 1940s. The refrigeration system was hermetically sealed and contained ammonia and hydrogen. This refrigeration system was co-invented by Albert Einstein for Electrolux in the early 1930s. When Freon became popular, the last I read about this type of refrigeration process was in the 1940s, but this type of refrigerator was still sold as late as 20 years ago to operate on propane, butane, or natural gas. A Michigan gas company, near Detroit I believe, was selling gas powered window air conditioners at one time, and stopped marketing them probably for safety reasons.

[@AcydDrop]

They sell fans for computers that are high static pressure fans meant for using in liquid cooling with radiators as well. They're also very easy to find. But this is super interesting stuff, thanks again!

[@jttech44]

The high static pressure computer fans aren't really high static pressure fans when you compare them to hvac blower fans. Scale this thing up 10x and those fans make sense, and they're not terribly expensive.

[@AcydDrop]

@@jttech44 Oh no doubt you're right about that. My main intend was you're not limited to high volume fans at 120mm size (as shown in video) but could get high static pressure 120mm fans for your own needs if making a similar setup.

[@Rheologist]

As a chemical engineering student, this video is great fun to watch! Thanks

[@dakodaspencershmacked5089]

You won me over. This video alone has made me a subscriber. Thanks for the video!

[@DLexEdition]

I love the science behind this project, pure genius.

[@TechIngredients]

Thanks!