Kresyaan Rei Do All That Shit Again On The Other Side.
@thatonequeergundamfan713 жыл бұрын
@@InfinitySZ that meme is dead
@Robo-kz3nr7 жыл бұрын
Take a shot for every time he says rotate and/or adjust
@Spartan-Primer7 жыл бұрын
do you want to get us killed?!
@bobbyde_pressed40237 жыл бұрын
take tequila. faster way out.
@MuMu1246 жыл бұрын
Robo 1234 You'll be shyt faced by the 2nd minute lmaoo
@vustvaleo80687 жыл бұрын
the problem with the RG Zeta is that it transforms from a humanoid shape into a plane shaped-thing, the Unicorn is just a humanoid that turns into a more taller & bulkier humanoid.
@dol_mel74877 жыл бұрын
Vust Valeo ^^^^ its hilarious people couldn't get this
@Spartan-Primer7 жыл бұрын
yeah. not many of us thought about this particular aspect of the design. but considering how the mg apparently was, the same transformation, but smaller, sounded like a disaster waiting to happen.
@TyyyJ7 жыл бұрын
You messed up the knee transformation. You're supposed to pull down the big back flap thing until the psychoframe part slides up.
@theodorun99657 жыл бұрын
Yeah alot of people including myself miss that at first then i saw the instructions on the side of the box (face palm)
@dol_mel74877 жыл бұрын
Potate Dot EXE heck you can break the leg by doing that if you dom't properly transform it
@Channel2S7 жыл бұрын
+Potate Dot EXE that would be a great way to break the leg flap.
@MrFlunkorg7 жыл бұрын
I have this kit since its release and have transformed it multiple times. Of all the things I'm worried about "breaking",(The upper arm part you mentioned is the main one) the leg flap is not one. Especially since I loosened them a bit while I was building it. (Like it tells you to do in the instructions) Edit: Are you talking about the armor piece thats attached to it? Dude, in that case, you're simply gripping it wrong. And even then, the pegs used to connect it are rather thick and deep. What in the actual fuck are you doing to the poor thing that you feel like you'll break it?!?!?!
@TyyyJ7 жыл бұрын
Channel 2S: Gunpla News hey there, mind your attitude. I was simply pointing out the fact that this is how it's supposed to be done, and it has worked fine for me and everyone else who has used it that way.
@kegaan5 жыл бұрын
I love this kind of review . Realistic , goes straight to the point . Thanks !
@itstotallynotsai65775 жыл бұрын
unicorn mode is my favorite mode
@simplecolors4 жыл бұрын
I am glad you made that video
@menroko7 жыл бұрын
I heard from my friends that the frame varies in tightness.Some are too tight and some are just right, but never heard of it being loose. Then again some people don't '"excersice the frame before build anyways.
@Channel2S7 жыл бұрын
+Al145 yeah, breaking in RG frames is pretty important. This one in particular was the tightest I've ever experienced.
@menroko7 жыл бұрын
Well, this might be a weird suggestion but try putting a drop of baby-oil or singer oil in parts that you think are too tight since I did that to my RG Qan [T] when it had the squeaks in the shoulder and waist joints to make it more smoother to pose, but don't use WD40 since the can melt plastics.
@Channel2S7 жыл бұрын
+Al145 oh no, that's not weird at all. I ended up having to use some shock oil on my RG Astray's hips a year or so ago.
@gbbgvbhff35137 жыл бұрын
Man your literally making the transformation complicated than it should be and its not fragile if you build it right you can actually play with it without braking the kit like me 😁
@crocgator36937 жыл бұрын
Ordered this last night. Waiting for it come now
@steffy27 жыл бұрын
Awesome Review ^^ nice Transformation sequence :D
@davisgwynn42956 жыл бұрын
I built the Banshee version after hearing the praise people threw at this thing. The Unicorn is one of my favorite designs, so I was hyped to build it. I got to the arms, and the frame completely snapped on me when I was trying to loosen up the joints. I applied a little bit of pressure to the shoulder joint and the upper arm connection snapped immediately. Luckily I could glue it. My next issue is the thigh construction. Any kind of rotation or movement causes the transformation gimmick pieces to pop off. It looks fantastic, and the yellow inner frame is sick, but as an avid RG collector and builder, I'm still slightly pissed at the arm snapping so easily. 6/10
@FourteenthAngel6 жыл бұрын
Davis Gwynn Owning the Banshee myself, you gotta be careful with it. I broke my Unicorn kit the same way so with this kit I made sure to not do anything it didn’t want to do xD
@19MofuMofu7 жыл бұрын
I love this kit. The unicorn gundam is my favorite mobile suit design and the rg was probably the most fun for me to build. Yea, some spots like the shoulder are SCARY tight, but it's not too hard to loosen them up. Definitely worth it though
@honghuynh93223 жыл бұрын
can you tell me how to loosen them up?
@reannoire43302 жыл бұрын
In my experience, the bicep part is the stiff part of the kit. You have to twist it left to right carefully without putting too much pressure until you can rotate that part smoothly, rinse repeat until you finally adjusted that part to its original position as the instruction illustrated
@WalcomS77 жыл бұрын
The foil sticker looks...off. I think the painted one you did looks much better.
@azzyvert96517 жыл бұрын
WalcomS7 wtf i watch ur channel u should start gunpla review👌
@WalcomS77 жыл бұрын
Why? I couldn't do better than this.
@azzyvert96517 жыл бұрын
WalcomS7 hey man at least do some showcases or a vid explaining your gunpla hobby
@WalcomS77 жыл бұрын
I have some of my kits as background in my old videos, and I'll probably do a video on some of them soon. Still slaving away at the PG Unicorn.
@azzyvert96517 жыл бұрын
WalcomS7 lol welp can't wait but ima go to bed cya😎
@DariusVladimirAuditore7 жыл бұрын
I actually broke the L-shaped piece that conects the arm to the torso and it was really hard to fix it. My advice is to try to loosen up the joints in the arm with dish soap, but BEFORE assembling the chest and arms, because it will be very dificult to dissasemble the arm from the torso after it's assembled.
@reannoire43302 жыл бұрын
I never used any of them. You only have to move the arm very gently as you slowly loosen up the stiffness of that joint, I did twist and turn slowly until you can clearly move the arm parts smoothly.
@GameAndMusicNerd6 жыл бұрын
Just got this for alChristmas. So hyped
@Sneaky.Nyxnyxnyx7 жыл бұрын
Open... Shit... i said the same thing hahaha
@tt-dt5ic7 жыл бұрын
It looks good. Mine is on the way. Thanks for the review.(Banshee,Phoenix and green frame. Shut up and take my money!)
@nu_keys7 жыл бұрын
Char Aznable FULL ARMOR
@19MofuMofu7 жыл бұрын
There's probably gonna be an extension for the rg that'll include the full-armor components.
@saiminsuishii14475 жыл бұрын
The gap in the torso isn’t an issue, it’s something I encountered too by playing with the torso. If it’s bothering you, just push the upper torso towards the lower torso, and that gap will go away
@andrewestrada65317 жыл бұрын
Mines is coming next week and I'm excited.
@jonasmanansala25863 жыл бұрын
are the nub marks in this kit undergated? because I'm planning to buy in the near future
@Caldoric5 жыл бұрын
Hold up, where'd you find that RG version with the trans-green internals? Asking because I've been looking for one with green internals for a little bit now... Also, are parts swappable with the RG 1/144 Banshee? I have both the Unicorn and Banshee on order in the same scale, and am hoping to make a "custom" Gundam of sorts using pieces from both kits.
@Caldoric5 жыл бұрын
And yes, before you ask, I AM new to Gunpla building, and have also just recently finished watching Gundam Build Fighters, so... Yeah, I'm a bit overenthusiastic and probably have a few incorrect expectations for the whole thing.
@letiwijaya12805 жыл бұрын
Caldoric thats the hg the rg will comw out with full armor attachment
@letiwijaya12805 жыл бұрын
I think you could swith it aslong as its not innerframe
@Caldoric5 жыл бұрын
@@letiwijaya1280 when's the RG green version scheduled for release, btw? Looking forward to that one... Also, how easy do you think it would be to throw a trans-am system onto the main body? Honestly, I need to look at more Gundam series to figure out what sort of body parts I'd want to throw together...
@letiwijaya12805 жыл бұрын
Caldoric its not trans am its psycho frame or something and i think it will work because there both the same model also i dont will the rg full armor unicorn come out
@BarelyDecentProduction7 жыл бұрын
hey, i just started to repaint one of my kit but a few parts of it got a little bit more layers of paint than the others got a tip on how to fix it?
@19MofuMofu7 жыл бұрын
BadBatchTGD you might just have to remove the paint and re-coat it
@visoak6 жыл бұрын
I'm new to seeing these models, and I am in awe at how the sheer detail confuses my sense of scale. This thing looks massive but your thumb dwarfs it!
@simplecolors4 жыл бұрын
It was cool when you Transfarm it
@NekkidSnek4207 жыл бұрын
Jobby-san?
@dol_mel74877 жыл бұрын
TheGhostofChar79 he's nothing like jobby....
@NekkidSnek4207 жыл бұрын
Jetfire48 oh i know...i watch them both...no where near Jobby
@denver63316 жыл бұрын
TheGhostofCharaznableis1960yearsold hi
@idonthaveanass5957 жыл бұрын
*A Jesta A Jesta rotate rotate A Jesta*
@orion90265 жыл бұрын
The Arms loosen up with time, so they wont become an issue after a while.
@noelko75657 жыл бұрын
You spray that with locitite silicone spray
@paolovillanuevamd6 жыл бұрын
I've played around with my RG Unicorn ALOT switching between Destroy Mode and Unicorn Mode in various poses and no problems whatsoever, so I don't get people who break theirs.
@monkelover233 жыл бұрын
Maybe the joints are a little too tight?
@paolovillanuevamd3 жыл бұрын
@@monkelover23 dunno, on mine they aren't
@monkelover233 жыл бұрын
@@paolovillanuevamd maybe some people got the ones that has tight joints and some get not too tight ones
@paolovillanuevamd3 жыл бұрын
@@monkelover23 meh maybe. Or maybe they didn't follow the instructions to properly loosen up the joints by flexing and extending the inner frame before putting the armor pieces on. It's just that I think people blow it out of proportion. So loud and noisy but most other people I personally know who've built it have the same experience as me which is that it's a solid kit, if you actually pay attention to what you're doing while building it. Well except for one but honestly he doesn't even bother cleaning nubs from his builds so I wasn't surprised. Definitely light years ahead of most older RG kits that use the Advanced MS Joint System.
@monkelover233 жыл бұрын
@@paolovillanuevamd i don't have the unicorn but that might be that
@krisjou14737 жыл бұрын
So is this your kit of the year so far or would that still go to HG Barzam or GM Sniper II? I personally have yet to finish any 2017 kits (except for Providence Gundam), and I got HG Zeta, Efreet Schneid, Hamma Hamma and Dragon Momoko Testament Gundam on my backlog...
@krisjou14737 жыл бұрын
I wouldn't recommend the use of Gundam Markers. For V fins they're ok, but it looks terrible on a larger area like on a shoulder or a shield. I usually save my markers for pipes or for minor touch-ups only.
@Channel2S7 жыл бұрын
+Kris Jou kit of the year for me is still the GM Ground Type for general overall quality, and RG Gold Frame for personal enjoyment. BD 1 is shaping up to dethrone the GM, though!
@krisjou14737 жыл бұрын
oh man, I'm looking forward to BD 1 too. I have a GM Ground Type, but in MG.
@radxl71197 жыл бұрын
SWIVEL HE MUST HAVE JOINED US
@AkoSiGundam697 жыл бұрын
Rotate Open Attach *say something snappy *rinse and repeat
@boiboi58204 жыл бұрын
I literally just bought this and it’ll be my first gundam ever so do you have any tips on putting it together?
@derk7534 жыл бұрын
Watch out for the arm joints (the biceps) (3:44) on the b runner they can break because they’re really tight so handle them carefully. Loosen them with extra care. You can find more details on reddit.
@donaldzuramp44047 жыл бұрын
did u have trouble with skirt armor? mine is a little loose
@Channel2S7 жыл бұрын
+Igneos Kai not really, it's on there pretty well.
@mr.snake00147 жыл бұрын
my rg unicorns arm joint is really tight, as for the neck joint i extended by adding more flat plastic then drilled a whole through it be carefull not to widen it.
@grandbacon55677 жыл бұрын
S W I V E L H E R E
@denver63316 жыл бұрын
A Potato he's not jobby sorry
@HybrydATP646 жыл бұрын
Lol he does also do articulation similarly to jobby
@denver63316 жыл бұрын
Hybrydatp64 :/
@ummguy55486 жыл бұрын
Now remember kiddos our lord and savior, jobby has asked his children not to spread his influence.
@hoebread75846 жыл бұрын
My man
@nightmare69metalmatt526 жыл бұрын
cant wait for the banshee
@HybrydATP646 жыл бұрын
The waist going up that much is normal mine does it too i think its to give it a taller look or to make articulation there easier
@mrsocrates22116 жыл бұрын
Which one is better unicorn? Rg or mg?
@STARSHADOWWOODWORKS7 жыл бұрын
Great review
@nu_keys7 жыл бұрын
Mine doesn't seem too tight. It is tighter than your average RG, but not by much. Use will loosen the joints a bit (which I did, it's just too cool to not play with)
@victor-primus97847 жыл бұрын
Can you use a hg banshee norn with the weapons of the original banshee combine pls ?
@dipron-dppt1345 жыл бұрын
Can i have this as a beginners RG?
@clarencedelacruz78227 жыл бұрын
your review made me want to buy this now hahahahahaha
@gerubax6 жыл бұрын
Is it okay to paint this with a spray can
@long-vutrinh22923 ай бұрын
How complex is the build
@thomastsuihn6 жыл бұрын
I don't know about this, but I broke a part of the MG Unicorn while transforming. I'm now pretty scared of transforming pretty much anything now... So I don't know about getting this
@rafiw87177 жыл бұрын
Might get one of this someday....
@WAcrobat196 жыл бұрын
R o W t A y T
@failed_K4 жыл бұрын
I remember I had this guy and somehow broke the hip joint, Then the right shoulder broke, And I was so confused since it was my first RG, And now I know why
@RextonWendell7 жыл бұрын
I actually wanted to get this But seeing how good the ZZ Ver.Ka is, I might have to ditch this lol
@EbullientSMP7 жыл бұрын
I recommend just going for this, we don't know how the ZZ Ver. Ka is like for sure yet, but the RG Unicorn is pretty much the kit of the year so far.
@RextonWendell7 жыл бұрын
ExtremeSManpig I just prefer MG Ver.Ka kits and the ZZ Ver.Ka really isn't that expensive Thanks for the suggestion :)
@fariday967 жыл бұрын
Rexton Wendell i guess mg zz ver ka gonna be good..w8 for it mate..u can buy rg unicorn later, go for mg zz ver ka hahaaa...
@RextonWendell7 жыл бұрын
Farid Asyraf I'll probably get both of them lol
@failed_K4 жыл бұрын
This was my first RG And then I broke the hip joint, then the shoulder broke
@Amatsaru296 жыл бұрын
The forearm transformation is pretty much effortless for me, once I unlock it. My problem are raising the thighs
@raihanmiftah60765 жыл бұрын
Mine also *had* that torso gap lol.
@fullmetalnoob22057 жыл бұрын
Good review
@phantomunion87907 жыл бұрын
Is a advance good tech of gunpla. it also was a nightmare transform gunpla.
@aolvs19507 жыл бұрын
Ajest!!!
@theredshift180sx7 жыл бұрын
Wait was that a green phyco frame rg unicorn
@Channel2S7 жыл бұрын
+The superior no, that was the HG.
@muhammadfirdaus22786 жыл бұрын
that gaping hole can be fixed by pushing it up
@nightmare69metalmatt526 жыл бұрын
i painted both v fins look way better the the sticker
@ez6314 Жыл бұрын
I broke both shoulder chest joint
@last_raven7 жыл бұрын
Say what you will about all the unicorn kits but in terms of how to handle the transformation there's next to nothing new in all my years of unicorns. Two going on 3 PGs, numerous MGs including the first v.ka, ms cage hd color, titanium finish etc and always I had to do the same shit with pins etc. You even get TWO in the pgs and if you buy the LED kit seperate it comes with a part puller
@denver63316 жыл бұрын
Channel 2s line Every gunpla hand ever
@tylercooley3217 жыл бұрын
Open open something open open something open open
@santosjr.espiritu74397 жыл бұрын
i just destroyed the right arm when i rotated it damn
@IO-BLANK-OI6 жыл бұрын
You are so wrong if you wanna transform the kneee you just have to slide down the thruster in the leg
@ardoronro66776 жыл бұрын
Yeah.....I'll just stick to Destroy mode.
@AyBee97255 жыл бұрын
Is this a good kit to throw on a bag and take with me lmaooo Honestly tho, can I do that?
@Channel2S5 жыл бұрын
Are we talking about a built kit here, or unbuilt in the box? Assuming you're looking for a kit to build on vacation or something, then this'll definitely keep you busy for a while. If you're planning on bringing one fully assembled... I don't know how well it'd survive.
@craggylotus6 жыл бұрын
a jest!
@bugglemagnum62136 жыл бұрын
The stickers look like shit on the v fin gold gundam marker highly recommended
@jazzthegamerz29665 жыл бұрын
Your review is way more detailed and not boring to watch than zakuarilus channel
@ShiwradAnimationz2 жыл бұрын
Rotate, rotate, rotate
@GundamNovice5 жыл бұрын
Jezzzzzzzz
@jaehoonchoi87346 жыл бұрын
2:32 SHIT Lol
@MrGoatFish107 жыл бұрын
lol thats alot of transformation... i prefer destroy mode...
All the commenting you did while doing the transformation was annoying AF! No need for all the rotate, swivel, attach, remove could have been left out & it would have made this video watchable.
@r0gu3534 жыл бұрын
I don't like the joints. I prefer pc joints
@andylanz96286 жыл бұрын
Adjust Rotate Adjust Shit
@TheDaduchi7 жыл бұрын
Too fragile
@azzyvert96517 жыл бұрын
WANNA BE JOBBY AND MEDS😅
@dol_mel74877 жыл бұрын
Issei Senpai 2S has been doing reviews longer... and humor doesn't equal being a Jobby thehong