RGT Challenger Pro: Extra Function, BEC Check and Rock Lights

[@martinrix8523]

I have the same Challenger pro. I also measured the voltage earlier this month and also got 7.46v. I noticed that the manual is the standard Challenger manual that has been poorly updated. The steer servo is a high voltage servo(8.4v). Would it then be a full 35kg on 7.5v? I'm fitting 120mm shocks, will see how it goes. Unfortunately ALL the micro servos left the chat. Dig servo lasted about 30min... the other two burnt without me using it...

[@RCBirds]

Thanks a lot for watching and your kind comment my friend. I don't know the original manual, but poorly upgraded would explain a lot. Hadn't this possibility in mind. I'm curious about your shock experiences. So feel free to report😉. I'll leave mine for now untouched. This is my first crawler with a (kind of) droop configuration. And I like it so far. It scares me that your litttle servos're all gone. Especial because they really don't have to work hard. I've no explaintions for it. Even micros should get along with 7.4 V. Breaking down without usage is unusual. Looks like something's wrong in the ESC or receiver. Hard to say from here. I can only recomment to contact RGT. For the steering servo, I would say it's 35kg on 7.4 V. For normal all the manfactors use the rated voltage to have an equal language. 2S batteries charge up to 8.4 V, but this is cutted down to 7.4 V by the ESC. If you get 8.4 V to the servo the torque might be more than 35 kg. Also with 6 V you still have more than you need. For me, and I might be wrong, 8.4 V is just marketing, on a short research I found no clear indications about such a kind. Mostly adds. To get the real value, it has to bemeassured with scales. I've no 3S here or any experiences with them. So no comment about these.

[@BasBoyRC]

That's a good feature for adding lights. That's good BEC power.

[@RCBirds]

Thanks a lot. Although the trust in manuals is vanishing, I got draged to the light engineer side😁. Reminds me a lot of my RC boating times. Have a great weekend Mal

[@satorrotas]

Very good job and excellent explanations. Always good to know 👍

[@RCBirds]

Thanks a lot Pascal. I really appreciate your support my friend

[@Coleccionismo_CAMU]

Very nice work Congratulations Excellent video 👍 💯💯👏👏

[@RCBirds]

Thqnks a lot. I really appreciate it 😊

[@MechanicallyFun]

Great information. The jungle river never fail to provide 🤣

[@RCBirds]

True, and sometimes I wish they would've more parts. And more details in tge describtions😁

[@rcuintheshed6981]

Nice work Durk little bit of re-routing I like it that rig is looking so good now 👌

[@RCBirds]

Thanks a lot Mark. Glad you like it.

[@OmRanaTürkiye]

Very good work bravo

[@RCBirds]

Thanks a lot for watching and your kind comment my friend

[@rcuintheshed6981]

Downloaded not sure what I'll see yet but great vid 👊 Have a good weekend Durk

[@RCBirds]

Thanks a lot Mark. Always looking forward for ypur expert feedback

[@gvbalajee]

Best RGT Challenger Pro:

[@RCBirds]

Thanks a lot for watching and your kind comment my friend

[@hanafardha7765]

Good sharing tutorial, thank you friends

[@RCBirds]

Thanks a lot for watching and your kind comment my friend

[@torontorc4637]

Great video, thanks for sharing 👍🏾

[@RCBirds]

Thanks a lot for watching and your kind comment my friend

[@HaydadRC]

Nice information you’ve given here Dirk! The truck looks great with those rock lights!👍😊

[@RCBirds]

Thanks a lot Jeremy. Glad you like it

[@RCplamodel]

cool new look, RC with great adventure, always good videos bro👍👍😃

[@RCBirds]

Thanks a lot for watching and your kind comment my friend

[@sparetimerc]

Hey Dirk, the RGT is looking good. You are putting a lot of personal touches on the RGT. The Rock lights definitely will help on the night runs. Great video.

[@RCBirds]

Thanks a lot Al, I'm glad you like it. Growing up back in those days with expensive radios, I'm a litle bit paranoid leaving channels without a use. So the rock lights're the best choise for the use. 😊 Night run'll shown as soon as the weather's getting better.

[@RallyandTrail]

Awesome work Dirk 👍😎🏁

[@RCBirds]

Thanks a lot Rob

[@msfunracer]

Klasse Beleuchtung. 🤩 Das ganze hast Du gut erklärt . Es ist manchmal nicht so einfach wie es aussieht. Viele Grüße 👋

[@RCBirds]

Danke sehr Markus. Irgendwie kann ich freie Kanäle nicht ungenutzt lassen.😉

[@Stephan-RC]

The rock lights look really good on the crawler. You installed the rock lights very well and explained them very well. Greetings Stephan

[@RCBirds]

Thanks a lot Stephan. Glad you like it. Have a great weekend my friend.

[@pichess23]

Thank you for sharing

[@RCBirds]

Thanks for watching😊

[@coygtrc]

Clear and informative video, thanks Dirk 👍🤝

[@RCBirds]

Thanks a lot for watching and your kind comment Daniel (please correct me, if I'm wrong. Names and faces're hard to remember for me)

[@coygtrc]

@RCBirds Gabriel actually (or Gab or Gabe) 😁😉🤝

[@RCBirds]

@@coygtrc thanks for the info Gabriel.

[@SevenWelt]

Glück ⚒Auf, Kurz und knapp soweit so gut👍, ich wünsche dir ein schönes Wochenende!🍀 Liebe Grüße von Seven🖖

[@RCBirds]

Danke sehr Seven, das wünsche ich Dir auch.

[@rcplaytime]

looks fantastic dude 😀👍👍👌👌

[@RCBirds]

Thanks a lot for watching and your kind comment my friend

[@TeamJunkYardDog]

You have really improved this truck!

[@RCBirds]

Thanks a lot my friend

[@ShenRC]

Nice work it looks great!

[@RCBirds]

Thanks a lot Steve

[@Wurstkommission]

Mal wieder ein sehr lehrreiches Video! 👍💪👍

[@RCBirds]

Danke sehr, mein Freund

[@TrickshotTimeHeiko]

Klasse Video wieder Dirk und coole Beleuchtung 👍😊

[@RCBirds]

Danke sehr Heiko. Wünsche Dir ein schönes Wochenende

[@pandacrawler6x6]

Very cool and super Informative tutorial my Friend!!! 🐼🏆🐻‍❄️👌🏻 Thks my Friend for the Share❤

[@RCBirds]

Thanks a lot Antonio. Hope I could give some inspiration.

[@pandacrawler6x6]

Yes Indeed my Friend ❤

[@tantebuggabugga]

Schöne Beleuchtung kommt abends bestimmt richtig gut rüber. Für die "unterboden Beleuchtung" hätte ich eher blaue leds genommen. Hab die in meinen Reely Eraser verbaut.

[@RCBirds]

Das ist mal ne Idee. Werde ich beim nächsten Crawler mal dran denken (und Spoiler für den BT-01 sind Lichtbänder unter dem Chassis geplat). Hier möchte ich ungern den Kleber wieder abfuddeln.

[@maxmixrc]

Very nice mod 😊👍💯

[@RCBirds]

Thank you😊

[@WatzRc]

Sieht klasse aus👍

[@RCBirds]

Danke sehr, Watz😊

[@PrizelTatzeRC]

Leider war ich in der Schule bei Physik immer Kreide holen und ich müsste der falschen Anleitung trauen.😅 Die Beleuchtung kommt sehr gut.💪

[@RCBirds]

😁 einfach nur aufpassen, daß die Kabel ohne Isolierjung nicht aneinander kommen. Danke für's Anschauen und Euch noch ein schönes Wochenende.

[@CicerosGamingshow]

Ich lasse mal vollen Support da

[@RCBirds]

Dankeschön und willkommen

[@laboite-a-rc]

👋😍👍

[@RCBirds]

Thanks a lot my friend