RH Crankcase cover cleaning and sealing

Oil seeping or leaking from right side crankcase? Detailed video showing how to remove, clean and properly seal the right side Crankcase cover.

[@jamesstephen7640]

Thanks so much for that about to fit a 19 tooth sprocket to my bullit just came across your vidio brilliant 👍👍

[@abhijeetkirtane]

Superb..well made video with excellent explanation. Proud of you. Great going!!!

[@rabijitshyam]

you should not apply bond near the hole on the top of oil filter if it jamed may cause oil circulation problems

[@rushi_245]

In My Classic 350,Chain Spray pipe went inside chain sprocket any problems will acquire

[@EnfieldPerformanceblogs]

Don't worry about it

[@limescotch428]

Nice and crisp video. Do you have Tightening torque values for RH cover Bolts. If you have please share them. Thanks.

[@jaibalajiram8910]

Using both Gasket and gasket maker is just a waste of time thread locker would work great on screws where it gets so much of vibration We use Wd40 is not a lubricant it is usually used for cleaning No offense your video is useful

[@dynamic_parmar]

do a video on clutch plate replacement. and good job keep it up.😊

[@EnfieldPerformanceblogs]

rishab singh Parmar Sure bro it can take some time as process is a bit difficult. however should be able to make it.

[@mandeepsingh-to7mx]

just got the oil seals changed but the leakage is still there. what could be the issue when the seals and gasket has installed new?

[@sujaikrishnanc9646]

Bro, is there a bush inside the kick start lever's area that we insert to that rod-like thing?

[@leandrogomesbonfim6559]

Por favor estou com um problema em minha Royal enfield clássic 500, quando ligo ela inclinada para a esquerda ela faz barulho alto de válvulas, porém quando ligo ela reta não faz barulho algum, sou do Brasil e aqui não sabem qual pode ser o problema por favor se puder ajudar.

[@emedinaemiliomed]

if you turned off the foot switch it is tipped to the left and the oil accumulates on the left when starting, this can cause damage to the stator also in addition to the valves, the classics must start standing up

[@leandrogomesbonfim6559]

@@emedinaemiliomed boa tarde era o descompressor que fica na valvula camy retirei e ela ficou boa, agradeço e fico feliz por poder contar com voces sempre prestativos.

[@stevemiller7433]

good job

[@Umeir1]

Hi, I noticed the gasket that was installed has some extra gasket sticking out from top and bottom on the left side of the crank case.. would that be an issue? I recently had mine replaced and the imperfect fitment is bothering me a bit, have you noticed? Is it the wrong gasket?

[@runawaybikers8504]

Yes, the gasket is of a another model

[@ashishprajapati4378]

After how many kilometres should we clean RH cover

[@mohdnayeem5959]

bro petrol ka use krsaket hai clean krne ke liye

[@EnfieldPerformanceblogs]

Bhai petrol ki jagah diesel use karna behtar hai.

[@hirenbhaipatel6423]

Don't use ana bond. Bcuz it's like rubber. The some of bond are stick on oil pump. And oil pump not pumping oil. It is jam. So always use 3 bond.

[@haramilonda7425]

Anabond red one is harmful white one is okay

[@mhs2501]

Is it gaskit maker?

[@SandyK784]

Is it a 18 teeth front sprocket?

[@biakmangvum7745]

Do we need to drain the oil(mobil)...

[@daishinkhan8044]

Bro do you know

[@ARAS2223]

Thanks for your help

[@daishinkhan8044]

Should we drain the oil first

[@EnfieldPerformanceblogs]

Always

[@AN-nn5si]

No

[@VishalRajput-lm5re]

Bade bhai rh cover tight karte waqt bade screw ke uper wala screw jyada tight karne ki wajah se screw chattt ki awaz karke loose ho gaya ab kya karu

[@EnfieldPerformanceblogs]

Screw ka thread toot gaya hain. Uske liye kisi achche mechanic ke paas woh log ya to weld karke naya threading kar dete hain ya fir ek white sealer hota hain woh daal dete hain.